linux/drivers/iio/adc
Greg Kroah-Hartman ec94efcdad The usual mixed bag of fixes for IIO in the 4.1 cycle.
Second version of this pull request as a small fix to a fix turned
 up before Greg pulled it for a cc10001 patch near the top of the tree.
 
 One core fix
 
 * Set updated for a iio kfifo was incorrectly set to false during a failed
   update, resulting in atttempts to repeat the failed operation appearing
   to succeed.
 
 This time I've decided to list the driver fixes in alphabetical order rather
 than 'randomly'.
 
 * axp288_adc - a recent change added a check for valid info masks when
   reading channels from consumer drivers.
 * bmp280 - temperature compensation was failing to read the tfine value, hence
   causing a temperature of 0 to always be returned and incorrect presure
   measurements.
 * cc10001 - Fix channel number mapping when some channels are reserved for
   remote CPUs. Fix an issue with the use of the power-up/power-down register
   (basically wrong polarity). Fix an issue due to the missinterpretting the
   return value from regulator_get_voltage. Add a delay before the start bit
   as recommended for the hardware to avoid data corruption.
 * hid pressure - fix channel spec of modfiied, but no modifier (which makes no
   sense!)
 * hid proximity - fix channel spec of modified, but no modifier (which makes
   no sense!). Fix a memory leak in the probe function.
 * mcp320x - occasional incorrect readings on dma using spi busses due to
   cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
 * mma9551 - buffer overrun fix (miss specified maximum length of buffers)
 * mma9553 - endian fix on status message. Add an enable element for activity
   channel. Input checking for activity period to avoid rather unpredictable
   results.
 * spmi-vadc - fix an overflow in the output value normalization seen on some
   boards.
 * st-snesors - oops due to use of a mutex that is not yet initialized during
   probe.
 * xilinx adc - Some wrong register addresses, a wrong address for vccaux
   channel, incorrect scale on VREFP and incorrect sign on VREFN.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVUllEAAoJEFSFNJnE9BaIq7MP/1BLv6u7MWh1FITay4aBSR16
 o8x7fmqbXoVSNz44cU3aZ//MJOfGNZQM220iA+e01PjmS3Jqr3HxSBLI/XosVEq8
 om40h7/esiYWP61u8yZeSXr74K25dUpaz9c4Zl+/2BRYlUAPEh3b9DraXN9dE8Rs
 u0AoGnYxnPAAYEbNUinKQLDw2BoQoTBX3QgRPNJsWL2BapAAyg9JNxm7JMKJateb
 dMP0LyJ7puVqfeDLb2XzNq8eaMbBrRMIj7LNJGOO8EvzCZEC029kSWlGUAgeXYgW
 XJdj0WZ8fmYw8OVzvgci5ODVS7RXqb22j2hjA2cx/20tFDt2WjGaQAwbQckWmVJx
 cZXzPY89wvqm5jpEey79GSAP8rx7PGy7SxFl0zmuqrdXte81W7ArvGwERJBQgEWa
 VR7WA3MnJjPQtyRRC0Y/6jwe+SdbmM50JmRzB7ApMf3G3sbAdEFp0rcNe181+S9V
 AmQK4OyBP9xVgnlNlglAKeDgNuG7w/2Bp8TFXaDX+1JQP4eM1GmoDyje4/x9WOsx
 hH+Ord9Vbyy8UjFq5tHS3444bmg8mYtYnWIH7+8XImvwhhyzDx82MVkqX2S37n+T
 tMQA04ntt/r68i6KsKVGP8QFftSNJcnFxXUMr4SPigomdaooe0v6Vl7w82kxFL5o
 Im6bayZ29fOuJWJ2Rslb
 =PiG+
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.1a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

The usual mixed bag of fixes for IIO in the 4.1 cycle.

Second version of this pull request as a small fix to a fix turned
up before Greg pulled it for a cc10001 patch near the top of the tree.

One core fix

* Set updated for a iio kfifo was incorrectly set to false during a failed
  update, resulting in atttempts to repeat the failed operation appearing
  to succeed.

This time I've decided to list the driver fixes in alphabetical order rather
than 'randomly'.

* axp288_adc - a recent change added a check for valid info masks when
  reading channels from consumer drivers.
* bmp280 - temperature compensation was failing to read the tfine value, hence
  causing a temperature of 0 to always be returned and incorrect presure
  measurements.
* cc10001 - Fix channel number mapping when some channels are reserved for
  remote CPUs. Fix an issue with the use of the power-up/power-down register
  (basically wrong polarity). Fix an issue due to the missinterpretting the
  return value from regulator_get_voltage. Add a delay before the start bit
  as recommended for the hardware to avoid data corruption.
* hid pressure - fix channel spec of modfiied, but no modifier (which makes no
  sense!)
* hid proximity - fix channel spec of modified, but no modifier (which makes
  no sense!). Fix a memory leak in the probe function.
* mcp320x - occasional incorrect readings on dma using spi busses due to
  cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
* mma9551 - buffer overrun fix (miss specified maximum length of buffers)
* mma9553 - endian fix on status message. Add an enable element for activity
  channel. Input checking for activity period to avoid rather unpredictable
  results.
* spmi-vadc - fix an overflow in the output value normalization seen on some
  boards.
* st-snesors - oops due to use of a mutex that is not yet initialized during
  probe.
* xilinx adc - Some wrong register addresses, a wrong address for vccaux
  channel, incorrect scale on VREFP and incorrect sign on VREFN.
2015-05-13 11:51:14 -07:00
..
Kconfig Staging driver patches for 4.1-rc1 2015-04-13 17:37:33 -07:00
Makefile iio: Add support for DA9150 GPADC 2015-02-25 21:05:26 +01:00
ad799x.c iio: ad799x: Fix ad7991/ad7995/ad7999 config setup 2014-12-12 12:34:00 +00:00
ad7266.c iio:ad7266: Mark transfer buffer as __be16 2013-12-03 20:22:27 +00:00
ad7291.c 3rd round of IIO new drivers, cleanups and functionality for the 3.17 cycle. 2014-07-13 12:31:47 -07:00
ad7298.c iio:adc:ad7298: Use BIT() and GENMASK() macros 2014-06-14 16:04:24 +01:00
ad7476.c iio:adc:ad7476: Use GENMASK() macro 2014-06-14 16:03:48 +01:00
ad7791.c iio:ad7791: Report scale as fractional value 2013-10-01 16:19:12 +01:00
ad7793.c iio:adc: Fix typo in MODULE_DESCRIPTION in ad7793.c 2015-03-07 19:18:49 +00:00
ad7887.c iio:adc:ad7887: Use BIT() and GENMASK() macros 2014-06-14 16:03:19 +01:00
ad7923.c iio:ad7923: Use iio_push_to_buffers_with_timestamp() 2013-09-21 19:23:53 +01:00
ad_sigma_delta.c iio: adc: ad_sigma_delta: Fix indio_dev->trig assignment 2014-08-25 21:48:29 +01:00
at91_adc.c iio: fix drivers that check buffer->scan_mask 2015-03-07 19:17:07 +00:00
axp288_adc.c iio/axp288_adc: add missing channel info mask 2015-04-09 18:49:13 +01:00
cc10001_adc.c iio: adc: cc10001: Add delay before setting START bit 2015-05-12 20:01:13 +01:00
da9150-gpadc.c iio: Add support for DA9150 GPADC 2015-02-25 21:05:26 +01:00
exynos_adc.c iio: adc: exynos_adc: Add support for exynos7 2014-11-05 15:38:25 +00:00
lp8788_adc.c iio: remove .owner field for driver using module_platform_driver 2014-08-26 21:08:38 +01:00
max1027.c treewide: Fix typo in printk messages 2015-03-06 23:05:39 +01:00
max1363.c iio:adc:max1363 incorrect resolutions for max11604, max11605, max11610 and max11611. 2014-05-25 12:06:25 +01:00
mcp320x.c iio: mcp320x: Fix occasional incorrect readings 2015-05-07 11:12:20 +01:00
mcp3422.c iio:adc:mcp3422 Fix incorrect scales table 2015-02-04 16:30:22 +00:00
men_z188_adc.c iio: adc: men_z188_adc: Add terminating entry for men_z188_ids 2014-11-15 16:12:04 +00:00
nau7802.c tree-wide: use reinit_completion instead of INIT_COMPLETION 2013-11-15 09:32:21 +09:00
qcom-spmi-iadc.c iio: iadc: wait_for_completion_timeout time in jiffies 2015-01-10 11:43:26 +00:00
qcom-spmi-vadc.c iio: adc: spmi-vadc: Fix overflow in output value normalization 2015-04-18 17:40:04 +01:00
rockchip_saradc.c Staging patches for 3.19-rc1 2014-12-15 18:06:13 -08:00
ti-adc081c.c iio: adc: ti-adc081c: Include linux/of.h header 2013-10-18 20:05:56 +01:00
ti-adc128s052.c iio: adc: Add TI ADC128S052 2014-08-07 14:43:25 +01:00
ti_am335x_adc.c iio: fix drivers that check buffer->scan_mask 2015-03-07 19:17:07 +00:00
twl4030-madc.c iio: remove .owner field for driver using module_platform_driver 2014-08-26 21:08:38 +01:00
twl6030-gpadc.c iio: remove .owner field for driver using module_platform_driver 2014-08-26 21:08:38 +01:00
vf610_adc.c Merge 4.0-rc7 into staging-next 2015-04-07 11:03:02 +02:00
viperboard_adc.c iio: remove .owner field for driver using module_platform_driver 2014-08-26 21:08:38 +01:00
xilinx-xadc-core.c iio: adc: xilinx: Fix VREFN sign 2015-04-19 13:49:54 +01:00
xilinx-xadc-events.c iio: xilinx-xadc: Remove unused variable 2014-07-03 22:00:40 +01:00
xilinx-xadc.h iio: adc: xilinx: Fix register addresses 2015-04-19 13:47:58 +01:00