linux/drivers/iio/light
Greg Kroah-Hartman ec94efcdad The usual mixed bag of fixes for IIO in the 4.1 cycle.
Second version of this pull request as a small fix to a fix turned
 up before Greg pulled it for a cc10001 patch near the top of the tree.
 
 One core fix
 
 * Set updated for a iio kfifo was incorrectly set to false during a failed
   update, resulting in atttempts to repeat the failed operation appearing
   to succeed.
 
 This time I've decided to list the driver fixes in alphabetical order rather
 than 'randomly'.
 
 * axp288_adc - a recent change added a check for valid info masks when
   reading channels from consumer drivers.
 * bmp280 - temperature compensation was failing to read the tfine value, hence
   causing a temperature of 0 to always be returned and incorrect presure
   measurements.
 * cc10001 - Fix channel number mapping when some channels are reserved for
   remote CPUs. Fix an issue with the use of the power-up/power-down register
   (basically wrong polarity). Fix an issue due to the missinterpretting the
   return value from regulator_get_voltage. Add a delay before the start bit
   as recommended for the hardware to avoid data corruption.
 * hid pressure - fix channel spec of modfiied, but no modifier (which makes no
   sense!)
 * hid proximity - fix channel spec of modified, but no modifier (which makes
   no sense!). Fix a memory leak in the probe function.
 * mcp320x - occasional incorrect readings on dma using spi busses due to
   cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
 * mma9551 - buffer overrun fix (miss specified maximum length of buffers)
 * mma9553 - endian fix on status message. Add an enable element for activity
   channel. Input checking for activity period to avoid rather unpredictable
   results.
 * spmi-vadc - fix an overflow in the output value normalization seen on some
   boards.
 * st-snesors - oops due to use of a mutex that is not yet initialized during
   probe.
 * xilinx adc - Some wrong register addresses, a wrong address for vccaux
   channel, incorrect scale on VREFP and incorrect sign on VREFN.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVUllEAAoJEFSFNJnE9BaIq7MP/1BLv6u7MWh1FITay4aBSR16
 o8x7fmqbXoVSNz44cU3aZ//MJOfGNZQM220iA+e01PjmS3Jqr3HxSBLI/XosVEq8
 om40h7/esiYWP61u8yZeSXr74K25dUpaz9c4Zl+/2BRYlUAPEh3b9DraXN9dE8Rs
 u0AoGnYxnPAAYEbNUinKQLDw2BoQoTBX3QgRPNJsWL2BapAAyg9JNxm7JMKJateb
 dMP0LyJ7puVqfeDLb2XzNq8eaMbBrRMIj7LNJGOO8EvzCZEC029kSWlGUAgeXYgW
 XJdj0WZ8fmYw8OVzvgci5ODVS7RXqb22j2hjA2cx/20tFDt2WjGaQAwbQckWmVJx
 cZXzPY89wvqm5jpEey79GSAP8rx7PGy7SxFl0zmuqrdXte81W7ArvGwERJBQgEWa
 VR7WA3MnJjPQtyRRC0Y/6jwe+SdbmM50JmRzB7ApMf3G3sbAdEFp0rcNe181+S9V
 AmQK4OyBP9xVgnlNlglAKeDgNuG7w/2Bp8TFXaDX+1JQP4eM1GmoDyje4/x9WOsx
 hH+Ord9Vbyy8UjFq5tHS3444bmg8mYtYnWIH7+8XImvwhhyzDx82MVkqX2S37n+T
 tMQA04ntt/r68i6KsKVGP8QFftSNJcnFxXUMr4SPigomdaooe0v6Vl7w82kxFL5o
 Im6bayZ29fOuJWJ2Rslb
 =PiG+
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.1a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

The usual mixed bag of fixes for IIO in the 4.1 cycle.

Second version of this pull request as a small fix to a fix turned
up before Greg pulled it for a cc10001 patch near the top of the tree.

One core fix

* Set updated for a iio kfifo was incorrectly set to false during a failed
  update, resulting in atttempts to repeat the failed operation appearing
  to succeed.

This time I've decided to list the driver fixes in alphabetical order rather
than 'randomly'.

* axp288_adc - a recent change added a check for valid info masks when
  reading channels from consumer drivers.
* bmp280 - temperature compensation was failing to read the tfine value, hence
  causing a temperature of 0 to always be returned and incorrect presure
  measurements.
* cc10001 - Fix channel number mapping when some channels are reserved for
  remote CPUs. Fix an issue with the use of the power-up/power-down register
  (basically wrong polarity). Fix an issue due to the missinterpretting the
  return value from regulator_get_voltage. Add a delay before the start bit
  as recommended for the hardware to avoid data corruption.
* hid pressure - fix channel spec of modfiied, but no modifier (which makes no
  sense!)
* hid proximity - fix channel spec of modified, but no modifier (which makes
  no sense!). Fix a memory leak in the probe function.
* mcp320x - occasional incorrect readings on dma using spi busses due to
  cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
* mma9551 - buffer overrun fix (miss specified maximum length of buffers)
* mma9553 - endian fix on status message. Add an enable element for activity
  channel. Input checking for activity period to avoid rather unpredictable
  results.
* spmi-vadc - fix an overflow in the output value normalization seen on some
  boards.
* st-snesors - oops due to use of a mutex that is not yet initialized during
  probe.
* xilinx adc - Some wrong register addresses, a wrong address for vccaux
  channel, incorrect scale on VREFP and incorrect sign on VREFN.
2015-05-13 11:51:14 -07:00
..
Kconfig First set of new drivers, cleanups and functionality for IIO in the 4.1 cycle. 2015-03-24 22:53:52 +01:00
Makefile iio: light: Add support for Capella CM3323 color sensor 2015-03-15 11:43:02 +00:00
adjd_s311.c iio: delete non-required instances of include <linux/init.h> 2014-01-11 11:59:00 +00:00
al3320a.c iio: Add Dyna-Image AL3320A ambient light sensor driver 2014-09-10 20:25:56 +01:00
apds9300.c iio: Remove support for the legacy event config interface 2013-12-08 13:13:52 +00:00
cm3232.c iio: light: Added PM support for Capella CM3232 ambient light sensor driver. 2015-03-08 12:04:57 +00:00
cm3323.c iio: light: Add support for Capella CM3323 color sensor 2015-03-15 11:43:02 +00:00
cm32181.c iio: light: cm32181: Fix typo 's/claibscale/calibscale/' 2015-01-25 22:53:49 +00:00
cm36651.c iio: cm36651: Fix i2c client leak and possible NULL pointer dereference 2014-03-22 12:22:49 +00:00
gp2ap020a00f.c iio: gp2ap020a00f: Use put_unaligned_le32 2015-02-14 17:28:41 +00:00
hid-sensor-als.c Merge branch 'for-4.1/sensor-hub' into for-linus 2015-04-13 23:43:34 +02:00
hid-sensor-prox.c The usual mixed bag of fixes for IIO in the 4.1 cycle. 2015-05-13 11:51:14 -07:00
isl29125.c iio: Add Intersil isl29125 digital color light sensor driver 2014-07-07 09:06:50 +01:00
jsa1212.c iio: jsa1212: Constify struct regmap_config 2015-02-25 11:37:53 +00:00
lm3533-als.c iio: light: lm3533-als: Remove space before ',' 2015-01-01 12:14:36 +00:00
ltr501.c iio: light: ltr501: Powerdown device on error 2015-04-02 10:27:39 +02:00
tcs3414.c iio: light: tcs3414: Fix misindented lines 2015-01-25 22:53:46 +00:00
tcs3472.c iio:tcs3472: Check for buffer enabled and locking 2014-07-07 08:59:16 +01:00
tsl2563.c First set of IIO fixes for the 3.14 cycle. 2014-02-07 08:57:00 -08:00
tsl4531.c iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not defined 2014-11-05 18:33:45 +00:00
vcnl4000.c iio:vcnl4000: Mark transfer buffer as __be16 2013-12-03 20:22:27 +00:00