mirror of https://gitee.com/openkylin/linux.git
121 lines
5.3 KiB
Plaintext
121 lines
5.3 KiB
Plaintext
NVIDIA Tegra114 pinmux controller
|
|
|
|
The Tegra114 pinctrl binding is very similar to the Tegra20 and Tegra30
|
|
pinctrl binding, as described in nvidia,tegra20-pinmux.txt and
|
|
nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as
|
|
a baseline, and only documents the differences between the two bindings.
|
|
|
|
Required properties:
|
|
- compatible: "nvidia,tegra114-pinmux"
|
|
- reg: Should contain the register physical address and length for each of
|
|
the pad control and mux registers. The first bank of address must be the
|
|
driver strength pad control register address and second bank address must
|
|
be pinmux register address.
|
|
|
|
Tegra114 adds the following optional properties for pin configuration subnodes:
|
|
- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
|
|
- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
|
|
- nvidia,lock: Integer. Lock the pin configuration against further changes
|
|
until reset. 0: no, 1: yes.
|
|
- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
|
|
- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. 0: normal, 1: high.
|
|
- nvidia,drive-type: Integer. Valid range 0...3.
|
|
|
|
As with Tegra20 and Terga30, see the Tegra TRM for complete details regarding
|
|
which groups support which functionality.
|
|
|
|
Valid values for pin and group names are:
|
|
|
|
per-pin mux groups:
|
|
|
|
These all support nvidia,function, nvidia,tristate, nvidia,pull,
|
|
nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
|
|
nvidia,io-reset and nvidia,rcv-sel.
|
|
|
|
ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4,
|
|
ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0,
|
|
ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0,
|
|
dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
|
|
sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6,
|
|
sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4,
|
|
ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
|
|
uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1,
|
|
uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_sda_pc5,
|
|
gen1_i2c_scl_pc4, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7,
|
|
clk3_out_pee0, clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7,
|
|
gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, gmi_cs2_n_pk3,
|
|
gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, gmi_cs7_n_pi6, gmi_ad0_pg0,
|
|
gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
|
|
gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
|
|
gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
|
|
gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, gmi_a19_pk7, gmi_wr_n_pi0,
|
|
gmi_oe_n_pi1, gmi_dqs_p_pj3, gmi_rst_n_pi4, gen2_i2c_scl_pt5,
|
|
gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
|
|
sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
|
|
sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, cam_mclk_pcc0,
|
|
pcc1, pbb0, cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
|
|
pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1,
|
|
kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6,
|
|
kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_col0_pq0,
|
|
kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
|
|
kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, core_pwr_req,
|
|
cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
|
|
dap1_sclk_pn3, clk1_req_pee2, clk1_out_pw4, spdif_in_pk6, spdif_out_pk5,
|
|
dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
|
|
gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, gpio_x4_aud_px4,
|
|
gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, sdmmc3_clk_pa6,
|
|
sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
|
|
sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2,
|
|
gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, usb_vbus_en1_pn5,
|
|
sdmmc3_clk_lb_in_pee5, sdmmc3_clk_lb_out_pee4, reset_out_n.
|
|
|
|
drive groups:
|
|
|
|
These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
|
|
nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
|
|
support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode
|
|
and nvidia,drive-type.
|
|
|
|
ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4,
|
|
dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
|
|
gmh, owr, uda.
|
|
|
|
Example:
|
|
|
|
pinmux: pinmux {
|
|
compatible = "nvidia,tegra114-pinmux";
|
|
reg = <0x70000868 0x148 /* Pad control registers */
|
|
0x70003000 0x40c>; /* PinMux registers */
|
|
};
|
|
|
|
Example board file extract:
|
|
|
|
pinctrl {
|
|
sdmmc4_default: pinmux {
|
|
sdmmc4_clk_pcc4 {
|
|
nvidia,pins = "sdmmc4_clk_pcc4",
|
|
nvidia,function = "sdmmc4";
|
|
nvidia,pull = <0>;
|
|
nvidia,tristate = <0>;
|
|
};
|
|
sdmmc4_dat0_paa0 {
|
|
nvidia,pins = "sdmmc4_dat0_paa0",
|
|
"sdmmc4_dat1_paa1",
|
|
"sdmmc4_dat2_paa2",
|
|
"sdmmc4_dat3_paa3",
|
|
"sdmmc4_dat4_paa4",
|
|
"sdmmc4_dat5_paa5",
|
|
"sdmmc4_dat6_paa6",
|
|
"sdmmc4_dat7_paa7";
|
|
nvidia,function = "sdmmc4";
|
|
nvidia,pull = <2>;
|
|
nvidia,tristate = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sdhci@78000400 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc4_default>;
|
|
};
|