mirror of https://gitee.com/openkylin/linux.git
82 lines
2.9 KiB
C
82 lines
2.9 KiB
C
/*
|
|
* A collection of structures, addresses, and values associated with
|
|
* the Embedded Planet RPX6 (or RPX Super) MPC8260 board.
|
|
* Copied from the RPX-Classic and SBS8260 stuff.
|
|
*
|
|
* Copyright (c) 2001 Dan Malek <dan@embeddededge.com>
|
|
*/
|
|
#ifdef __KERNEL__
|
|
#ifndef __ASM_PLATFORMS_RPX8260_H__
|
|
#define __ASM_PLATFORMS_RPX8260_H__
|
|
|
|
/* A Board Information structure that is given to a program when
|
|
* prom starts it up.
|
|
*/
|
|
typedef struct bd_info {
|
|
unsigned int bi_memstart; /* Memory start address */
|
|
unsigned int bi_memsize; /* Memory (end) size in bytes */
|
|
unsigned int bi_nvsize; /* NVRAM size in bytes (can be 0) */
|
|
unsigned int bi_intfreq; /* Internal Freq, in Hz */
|
|
unsigned int bi_busfreq; /* Bus Freq, in MHz */
|
|
unsigned int bi_cpmfreq; /* CPM Freq, in MHz */
|
|
unsigned int bi_brgfreq; /* BRG Freq, in MHz */
|
|
unsigned int bi_vco; /* VCO Out from PLL */
|
|
unsigned int bi_baudrate; /* Default console baud rate */
|
|
unsigned int bi_immr; /* IMMR when called from boot rom */
|
|
unsigned char bi_enetaddr[6];
|
|
} bd_t;
|
|
|
|
extern bd_t m8xx_board_info;
|
|
|
|
/* Memory map is configured by the PROM startup.
|
|
* We just map a few things we need. The CSR is actually 4 byte-wide
|
|
* registers that can be accessed as 8-, 16-, or 32-bit values.
|
|
*/
|
|
#define CPM_MAP_ADDR ((uint)0xf0000000)
|
|
#define RPX_CSR_ADDR ((uint)0xfa000000)
|
|
#define RPX_CSR_SIZE ((uint)(512 * 1024))
|
|
#define RPX_NVRTC_ADDR ((uint)0xfa080000)
|
|
#define RPX_NVRTC_SIZE ((uint)(512 * 1024))
|
|
|
|
/* The RPX6 has 16, byte wide control/status registers.
|
|
* Not all are used (yet).
|
|
*/
|
|
extern volatile u_char *rpx6_csr_addr;
|
|
|
|
/* Things of interest in the CSR.
|
|
*/
|
|
#define BCSR0_ID_MASK ((u_char)0xf0) /* Read only */
|
|
#define BCSR0_SWITCH_MASK ((u_char)0x0f) /* Read only */
|
|
#define BCSR1_XCVR_SMC1 ((u_char)0x80)
|
|
#define BCSR1_XCVR_SMC2 ((u_char)0x40)
|
|
#define BCSR2_FLASH_WENABLE ((u_char)0x20)
|
|
#define BCSR2_NVRAM_ENABLE ((u_char)0x10)
|
|
#define BCSR2_ALT_IRQ2 ((u_char)0x08)
|
|
#define BCSR2_ALT_IRQ3 ((u_char)0x04)
|
|
#define BCSR2_PRST ((u_char)0x02) /* Force reset */
|
|
#define BCSR2_ENPRST ((u_char)0x01) /* Enable POR */
|
|
#define BCSR3_MODCLK_MASK ((u_char)0xe0)
|
|
#define BCSR3_ENCLKHDR ((u_char)0x10)
|
|
#define BCSR3_LED5 ((u_char)0x04) /* 0 == on */
|
|
#define BCSR3_LED6 ((u_char)0x02) /* 0 == on */
|
|
#define BCSR3_LED7 ((u_char)0x01) /* 0 == on */
|
|
#define BCSR4_EN_PHY ((u_char)0x80) /* Enable PHY */
|
|
#define BCSR4_EN_MII ((u_char)0x40) /* Enable PHY */
|
|
#define BCSR4_MII_READ ((u_char)0x04)
|
|
#define BCSR4_MII_MDC ((u_char)0x02)
|
|
#define BCSR4_MII_MDIO ((u_char)0x01)
|
|
#define BCSR13_FETH_IRQMASK ((u_char)0xf0)
|
|
#define BCSR15_FETH_IRQ ((u_char)0x20)
|
|
|
|
#define PHY_INTERRUPT SIU_INT_IRQ7
|
|
|
|
/* For our show_cpuinfo hooks. */
|
|
#define CPUINFO_VENDOR "Embedded Planet"
|
|
#define CPUINFO_MACHINE "EP8260 PowerPC"
|
|
|
|
/* Warm reset vector. */
|
|
#define BOOTROM_RESTART_ADDR ((uint)0xfff00104)
|
|
|
|
#endif /* __ASM_PLATFORMS_RPX8260_H__ */
|
|
#endif /* __KERNEL__ */
|