mirror of https://gitee.com/openkylin/linux.git
147 lines
3.8 KiB
C
147 lines
3.8 KiB
C
/*
|
|
* Copyright (C) 1999 ARM Limited
|
|
* Copyright (C) 2000 Deep Blue Solutions Ltd
|
|
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
|
|
* Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
|
|
#include <asm/system_misc.h>
|
|
#include <asm/proc-fns.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
|
|
#include "common.h"
|
|
#include "hardware.h"
|
|
|
|
static void __iomem *wdog_base;
|
|
static struct clk *wdog_clk;
|
|
|
|
/*
|
|
* Reset the system. It is called by machine_restart().
|
|
*/
|
|
void mxc_restart(enum reboot_mode mode, const char *cmd)
|
|
{
|
|
unsigned int wcr_enable;
|
|
|
|
if (!wdog_base)
|
|
goto reset_fallback;
|
|
|
|
if (!IS_ERR(wdog_clk))
|
|
clk_enable(wdog_clk);
|
|
|
|
if (cpu_is_mx1())
|
|
wcr_enable = (1 << 0);
|
|
else
|
|
wcr_enable = (1 << 2);
|
|
|
|
/* Assert SRS signal */
|
|
__raw_writew(wcr_enable, wdog_base);
|
|
/*
|
|
* Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be
|
|
* written twice), we add another two writes to ensure there must be at
|
|
* least two writes happen in the same one 32kHz clock period. We save
|
|
* the target check here, since the writes shouldn't be a huge burden
|
|
* for other platforms.
|
|
*/
|
|
__raw_writew(wcr_enable, wdog_base);
|
|
__raw_writew(wcr_enable, wdog_base);
|
|
|
|
/* wait for reset to assert... */
|
|
mdelay(500);
|
|
|
|
pr_err("%s: Watchdog reset failed to assert reset\n", __func__);
|
|
|
|
/* delay to allow the serial port to show the message */
|
|
mdelay(50);
|
|
|
|
reset_fallback:
|
|
/* we'll take a jump through zero as a poor second */
|
|
soft_restart(0);
|
|
}
|
|
|
|
void __init mxc_arch_reset_init(void __iomem *base)
|
|
{
|
|
wdog_base = base;
|
|
|
|
wdog_clk = clk_get_sys("imx2-wdt.0", NULL);
|
|
if (IS_ERR(wdog_clk))
|
|
pr_warn("%s: failed to get wdog clock\n", __func__);
|
|
else
|
|
clk_prepare(wdog_clk);
|
|
}
|
|
|
|
void __init mxc_arch_reset_init_dt(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,imx21-wdt");
|
|
wdog_base = of_iomap(np, 0);
|
|
WARN_ON(!wdog_base);
|
|
|
|
wdog_clk = of_clk_get(np, 0);
|
|
if (IS_ERR(wdog_clk))
|
|
pr_warn("%s: failed to get wdog clock\n", __func__);
|
|
else
|
|
clk_prepare(wdog_clk);
|
|
}
|
|
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
void __init imx_init_l2cache(void)
|
|
{
|
|
void __iomem *l2x0_base;
|
|
struct device_node *np;
|
|
unsigned int val;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
|
|
if (!np)
|
|
goto out;
|
|
|
|
l2x0_base = of_iomap(np, 0);
|
|
if (!l2x0_base) {
|
|
of_node_put(np);
|
|
goto out;
|
|
}
|
|
|
|
/* Configure the L2 PREFETCH and POWER registers */
|
|
val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL);
|
|
val |= 0x70800000;
|
|
/*
|
|
* The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
|
|
* The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
|
|
* But according to ARM PL310 errata: 752271
|
|
* ID: 752271: Double linefill feature can cause data corruption
|
|
* Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
|
|
* Workaround: The only workaround to this erratum is to disable the
|
|
* double linefill feature. This is the default behavior.
|
|
*/
|
|
if (cpu_is_imx6q())
|
|
val &= ~(1 << 30 | 1 << 23);
|
|
writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL);
|
|
|
|
iounmap(l2x0_base);
|
|
of_node_put(np);
|
|
|
|
out:
|
|
l2x0_of_init(0, ~0);
|
|
}
|
|
#endif
|