mirror of https://gitee.com/openkylin/linux.git
236 lines
8.2 KiB
Plaintext
236 lines
8.2 KiB
Plaintext
From kernel/suspend.c:
|
||
|
||
* BIG FAT WARNING *********************************************************
|
||
*
|
||
* If you have unsupported (*) devices using DMA...
|
||
* ...say goodbye to your data.
|
||
*
|
||
* If you touch anything on disk between suspend and resume...
|
||
* ...kiss your data goodbye.
|
||
*
|
||
* If your disk driver does not support suspend... (IDE does)
|
||
* ...you'd better find out how to get along
|
||
* without your data.
|
||
*
|
||
* If you change kernel command line between suspend and resume...
|
||
* ...prepare for nasty fsck or worse.
|
||
*
|
||
* If you change your hardware while system is suspended...
|
||
* ...well, it was not good idea.
|
||
*
|
||
* (*) suspend/resume support is needed to make it safe.
|
||
|
||
You need to append resume=/dev/your_swap_partition to kernel command
|
||
line. Then you suspend by
|
||
|
||
echo shutdown > /sys/power/disk; echo disk > /sys/power/state
|
||
|
||
. If you feel ACPI works pretty well on your system, you might try
|
||
|
||
echo platform > /sys/power/disk; echo disk > /sys/power/state
|
||
|
||
|
||
|
||
Article about goals and implementation of Software Suspend for Linux
|
||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
Author: G‚ábor Kuti
|
||
Last revised: 2003-10-20 by Pavel Machek
|
||
|
||
Idea and goals to achieve
|
||
|
||
Nowadays it is common in several laptops that they have a suspend button. It
|
||
saves the state of the machine to a filesystem or to a partition and switches
|
||
to standby mode. Later resuming the machine the saved state is loaded back to
|
||
ram and the machine can continue its work. It has two real benefits. First we
|
||
save ourselves the time machine goes down and later boots up, energy costs
|
||
are real high when running from batteries. The other gain is that we don't have to
|
||
interrupt our programs so processes that are calculating something for a long
|
||
time shouldn't need to be written interruptible.
|
||
|
||
swsusp saves the state of the machine into active swaps and then reboots or
|
||
powerdowns. You must explicitly specify the swap partition to resume from with
|
||
``resume='' kernel option. If signature is found it loads and restores saved
|
||
state. If the option ``noresume'' is specified as a boot parameter, it skips
|
||
the resuming.
|
||
|
||
In the meantime while the system is suspended you should not add/remove any
|
||
of the hardware, write to the filesystems, etc.
|
||
|
||
Sleep states summary
|
||
====================
|
||
|
||
There are three different interfaces you can use, /proc/acpi should
|
||
work like this:
|
||
|
||
In a really perfect world:
|
||
echo 1 > /proc/acpi/sleep # for standby
|
||
echo 2 > /proc/acpi/sleep # for suspend to ram
|
||
echo 3 > /proc/acpi/sleep # for suspend to ram, but with more power conservative
|
||
echo 4 > /proc/acpi/sleep # for suspend to disk
|
||
echo 5 > /proc/acpi/sleep # for shutdown unfriendly the system
|
||
|
||
and perhaps
|
||
echo 4b > /proc/acpi/sleep # for suspend to disk via s4bios
|
||
|
||
Frequently Asked Questions
|
||
==========================
|
||
|
||
Q: well, suspending a server is IMHO a really stupid thing,
|
||
but... (Diego Zuccato):
|
||
|
||
A: You bought new UPS for your server. How do you install it without
|
||
bringing machine down? Suspend to disk, rearrange power cables,
|
||
resume.
|
||
|
||
You have your server on UPS. Power died, and UPS is indicating 30
|
||
seconds to failure. What do you do? Suspend to disk.
|
||
|
||
Ethernet card in your server died. You want to replace it. Your
|
||
server is not hotplug capable. What do you do? Suspend to disk,
|
||
replace ethernet card, resume. If you are fast your users will not
|
||
even see broken connections.
|
||
|
||
|
||
Q: Maybe I'm missing something, but why don't the regular I/O paths work?
|
||
|
||
A: We do use the regular I/O paths. However we cannot restore the data
|
||
to its original location as we load it. That would create an
|
||
inconsistent kernel state which would certainly result in an oops.
|
||
Instead, we load the image into unused memory and then atomically copy
|
||
it back to it original location. This implies, of course, a maximum
|
||
image size of half the amount of memory.
|
||
|
||
There are two solutions to this:
|
||
|
||
* require half of memory to be free during suspend. That way you can
|
||
read "new" data onto free spots, then cli and copy
|
||
|
||
* assume we had special "polling" ide driver that only uses memory
|
||
between 0-640KB. That way, I'd have to make sure that 0-640KB is free
|
||
during suspending, but otherwise it would work...
|
||
|
||
suspend2 shares this fundamental limitation, but does not include user
|
||
data and disk caches into "used memory" by saving them in
|
||
advance. That means that the limitation goes away in practice.
|
||
|
||
Q: Does linux support ACPI S4?
|
||
|
||
A: Yes. That's what echo platform > /sys/power/disk does.
|
||
|
||
Q: My machine doesn't work with ACPI. How can I use swsusp than ?
|
||
|
||
A: Do a reboot() syscall with right parameters. Warning: glibc gets in
|
||
its way, so check with strace:
|
||
|
||
reboot(LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, 0xd000fce2)
|
||
|
||
(Thanks to Peter Osterlund:)
|
||
|
||
#include <unistd.h>
|
||
#include <syscall.h>
|
||
|
||
#define LINUX_REBOOT_MAGIC1 0xfee1dead
|
||
#define LINUX_REBOOT_MAGIC2 672274793
|
||
#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2
|
||
|
||
int main()
|
||
{
|
||
syscall(SYS_reboot, LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2,
|
||
LINUX_REBOOT_CMD_SW_SUSPEND, 0);
|
||
return 0;
|
||
}
|
||
|
||
Also /sys/ interface should be still present.
|
||
|
||
Q: What is 'suspend2'?
|
||
|
||
A: suspend2 is 'Software Suspend 2', a forked implementation of
|
||
suspend-to-disk which is available as separate patches for 2.4 and 2.6
|
||
kernels from swsusp.sourceforge.net. It includes support for SMP, 4GB
|
||
highmem and preemption. It also has a extensible architecture that
|
||
allows for arbitrary transformations on the image (compression,
|
||
encryption) and arbitrary backends for writing the image (eg to swap
|
||
or an NFS share[Work In Progress]). Questions regarding suspend2
|
||
should be sent to the mailing list available through the suspend2
|
||
website, and not to the Linux Kernel Mailing List. We are working
|
||
toward merging suspend2 into the mainline kernel.
|
||
|
||
Q: A kernel thread must voluntarily freeze itself (call 'refrigerator').
|
||
I found some kernel threads that don't do it, and they don't freeze
|
||
so the system can't sleep. Is this a known behavior?
|
||
|
||
A: All such kernel threads need to be fixed, one by one. Select the
|
||
place where the thread is safe to be frozen (no kernel semaphores
|
||
should be held at that point and it must be safe to sleep there), and
|
||
add:
|
||
|
||
if (current->flags & PF_FREEZE)
|
||
refrigerator(PF_FREEZE);
|
||
|
||
If the thread is needed for writing the image to storage, you should
|
||
instead set the PF_NOFREEZE process flag when creating the thread.
|
||
|
||
|
||
Q: What is the difference between between "platform", "shutdown" and
|
||
"firmware" in /sys/power/disk?
|
||
|
||
A:
|
||
|
||
shutdown: save state in linux, then tell bios to powerdown
|
||
|
||
platform: save state in linux, then tell bios to powerdown and blink
|
||
"suspended led"
|
||
|
||
firmware: tell bios to save state itself [needs BIOS-specific suspend
|
||
partition, and has very little to do with swsusp]
|
||
|
||
"platform" is actually right thing to do, but "shutdown" is most
|
||
reliable.
|
||
|
||
Q: I do not understand why you have such strong objections to idea of
|
||
selective suspend.
|
||
|
||
A: Do selective suspend during runtime power managment, that's okay. But
|
||
its useless for suspend-to-disk. (And I do not see how you could use
|
||
it for suspend-to-ram, I hope you do not want that).
|
||
|
||
Lets see, so you suggest to
|
||
|
||
* SUSPEND all but swap device and parents
|
||
* Snapshot
|
||
* Write image to disk
|
||
* SUSPEND swap device and parents
|
||
* Powerdown
|
||
|
||
Oh no, that does not work, if swap device or its parents uses DMA,
|
||
you've corrupted data. You'd have to do
|
||
|
||
* SUSPEND all but swap device and parents
|
||
* FREEZE swap device and parents
|
||
* Snapshot
|
||
* UNFREEZE swap device and parents
|
||
* Write
|
||
* SUSPEND swap device and parents
|
||
|
||
Which means that you still need that FREEZE state, and you get more
|
||
complicated code. (And I have not yet introduce details like system
|
||
devices).
|
||
|
||
Q: There don't seem to be any generally useful behavioral
|
||
distinctions between SUSPEND and FREEZE.
|
||
|
||
A: Doing SUSPEND when you are asked to do FREEZE is always correct,
|
||
but it may be unneccessarily slow. If you want USB to stay simple,
|
||
slowness may not matter to you. It can always be fixed later.
|
||
|
||
For devices like disk it does matter, you do not want to spindown for
|
||
FREEZE.
|
||
|
||
Q: After resuming, system is paging heavilly, leading to very bad interactivity.
|
||
|
||
A: Try running
|
||
|
||
cat `cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u` > /dev/null
|
||
|
||
after resume. swapoff -a; swapon -a may also be usefull.
|