mirror of https://gitee.com/openkylin/linux.git
723 lines
18 KiB
C
723 lines
18 KiB
C
/*
|
|
* Copyright (C) 2014 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/version.h>
|
|
|
|
#define N_DATA_REGS 8
|
|
|
|
/*
|
|
* PER_I2C/BSC count register mask depends on 1 byte/4 byte data register
|
|
* size. Cable modem and DSL SoCs with Peripheral i2c cores use 1 byte per
|
|
* data register whereas STB SoCs use 4 byte per data register transfer,
|
|
* account for this difference in total count per transaction and mask to
|
|
* use.
|
|
*/
|
|
#define BSC_CNT_REG1_MASK(nb) (nb == 1 ? GENMASK(3, 0) : GENMASK(5, 0))
|
|
#define BSC_CNT_REG1_SHIFT 0
|
|
|
|
/* BSC CTL register field definitions */
|
|
#define BSC_CTL_REG_DTF_MASK 0x00000003
|
|
#define BSC_CTL_REG_SCL_SEL_MASK 0x00000030
|
|
#define BSC_CTL_REG_SCL_SEL_SHIFT 4
|
|
#define BSC_CTL_REG_INT_EN_MASK 0x00000040
|
|
#define BSC_CTL_REG_INT_EN_SHIFT 6
|
|
#define BSC_CTL_REG_DIV_CLK_MASK 0x00000080
|
|
|
|
/* BSC_IIC_ENABLE r/w enable and interrupt field definitions */
|
|
#define BSC_IIC_EN_RESTART_MASK 0x00000040
|
|
#define BSC_IIC_EN_NOSTART_MASK 0x00000020
|
|
#define BSC_IIC_EN_NOSTOP_MASK 0x00000010
|
|
#define BSC_IIC_EN_NOACK_MASK 0x00000004
|
|
#define BSC_IIC_EN_INTRP_MASK 0x00000002
|
|
#define BSC_IIC_EN_ENABLE_MASK 0x00000001
|
|
|
|
/* BSC_CTLHI control register field definitions */
|
|
#define BSC_CTLHI_REG_INPUT_SWITCHING_LEVEL_MASK 0x00000080
|
|
#define BSC_CTLHI_REG_DATAREG_SIZE_MASK 0x00000040
|
|
#define BSC_CTLHI_REG_IGNORE_ACK_MASK 0x00000002
|
|
#define BSC_CTLHI_REG_WAIT_DIS_MASK 0x00000001
|
|
|
|
#define I2C_TIMEOUT 100 /* msecs */
|
|
|
|
/* Condition mask used for non combined transfer */
|
|
#define COND_RESTART BSC_IIC_EN_RESTART_MASK
|
|
#define COND_NOSTART BSC_IIC_EN_NOSTART_MASK
|
|
#define COND_NOSTOP BSC_IIC_EN_NOSTOP_MASK
|
|
#define COND_START_STOP (COND_RESTART | COND_NOSTART | COND_NOSTOP)
|
|
|
|
/* BSC data transfer direction */
|
|
#define DTF_WR_MASK 0x00000000
|
|
#define DTF_RD_MASK 0x00000001
|
|
/* BSC data transfer direction combined format */
|
|
#define DTF_RD_WR_MASK 0x00000002
|
|
#define DTF_WR_RD_MASK 0x00000003
|
|
|
|
#define INT_ENABLE true
|
|
#define INT_DISABLE false
|
|
|
|
/* BSC block register map structure to cache fields to be written */
|
|
struct bsc_regs {
|
|
u32 chip_address; /* slave address */
|
|
u32 data_in[N_DATA_REGS]; /* tx data buffer*/
|
|
u32 cnt_reg; /* rx/tx data length */
|
|
u32 ctl_reg; /* control register */
|
|
u32 iic_enable; /* xfer enable and status */
|
|
u32 data_out[N_DATA_REGS]; /* rx data buffer */
|
|
u32 ctlhi_reg; /* more control fields */
|
|
u32 scl_param; /* reserved */
|
|
};
|
|
|
|
struct bsc_clk_param {
|
|
u32 hz;
|
|
u32 scl_mask;
|
|
u32 div_mask;
|
|
};
|
|
|
|
enum bsc_xfer_cmd {
|
|
CMD_WR,
|
|
CMD_RD,
|
|
CMD_WR_NOACK,
|
|
CMD_RD_NOACK,
|
|
};
|
|
|
|
static char const *cmd_string[] = {
|
|
[CMD_WR] = "WR",
|
|
[CMD_RD] = "RD",
|
|
[CMD_WR_NOACK] = "WR NOACK",
|
|
[CMD_RD_NOACK] = "RD NOACK",
|
|
};
|
|
|
|
enum bus_speeds {
|
|
SPD_375K,
|
|
SPD_390K,
|
|
SPD_187K,
|
|
SPD_200K,
|
|
SPD_93K,
|
|
SPD_97K,
|
|
SPD_46K,
|
|
SPD_50K
|
|
};
|
|
|
|
static const struct bsc_clk_param bsc_clk[] = {
|
|
[SPD_375K] = {
|
|
.hz = 375000,
|
|
.scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT,
|
|
.div_mask = 0
|
|
},
|
|
[SPD_390K] = {
|
|
.hz = 390000,
|
|
.scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT,
|
|
.div_mask = 0
|
|
},
|
|
[SPD_187K] = {
|
|
.hz = 187500,
|
|
.scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT,
|
|
.div_mask = 0
|
|
},
|
|
[SPD_200K] = {
|
|
.hz = 200000,
|
|
.scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT,
|
|
.div_mask = 0
|
|
},
|
|
[SPD_93K] = {
|
|
.hz = 93750,
|
|
.scl_mask = SPD_375K << BSC_CTL_REG_SCL_SEL_SHIFT,
|
|
.div_mask = BSC_CTL_REG_DIV_CLK_MASK
|
|
},
|
|
[SPD_97K] = {
|
|
.hz = 97500,
|
|
.scl_mask = SPD_390K << BSC_CTL_REG_SCL_SEL_SHIFT,
|
|
.div_mask = BSC_CTL_REG_DIV_CLK_MASK
|
|
},
|
|
[SPD_46K] = {
|
|
.hz = 46875,
|
|
.scl_mask = SPD_187K << BSC_CTL_REG_SCL_SEL_SHIFT,
|
|
.div_mask = BSC_CTL_REG_DIV_CLK_MASK
|
|
},
|
|
[SPD_50K] = {
|
|
.hz = 50000,
|
|
.scl_mask = SPD_200K << BSC_CTL_REG_SCL_SEL_SHIFT,
|
|
.div_mask = BSC_CTL_REG_DIV_CLK_MASK
|
|
}
|
|
};
|
|
|
|
struct brcmstb_i2c_dev {
|
|
struct device *device;
|
|
void __iomem *base;
|
|
void __iomem *irq_base;
|
|
int irq;
|
|
struct bsc_regs *bsc_regmap;
|
|
struct i2c_adapter adapter;
|
|
struct completion done;
|
|
bool is_suspended;
|
|
u32 clk_freq_hz;
|
|
int data_regsz;
|
|
};
|
|
|
|
/* register accessors for both be and le cpu arch */
|
|
#ifdef CONFIG_CPU_BIG_ENDIAN
|
|
#define __bsc_readl(_reg) ioread32be(_reg)
|
|
#define __bsc_writel(_val, _reg) iowrite32be(_val, _reg)
|
|
#else
|
|
#define __bsc_readl(_reg) ioread32(_reg)
|
|
#define __bsc_writel(_val, _reg) iowrite32(_val, _reg)
|
|
#endif
|
|
|
|
#define bsc_readl(_dev, _reg) \
|
|
__bsc_readl(_dev->base + offsetof(struct bsc_regs, _reg))
|
|
|
|
#define bsc_writel(_dev, _val, _reg) \
|
|
__bsc_writel(_val, _dev->base + offsetof(struct bsc_regs, _reg))
|
|
|
|
static inline int brcmstb_i2c_get_xfersz(struct brcmstb_i2c_dev *dev)
|
|
{
|
|
return (N_DATA_REGS * dev->data_regsz);
|
|
}
|
|
|
|
static inline int brcmstb_i2c_get_data_regsz(struct brcmstb_i2c_dev *dev)
|
|
{
|
|
return dev->data_regsz;
|
|
}
|
|
|
|
static void brcmstb_i2c_enable_disable_irq(struct brcmstb_i2c_dev *dev,
|
|
bool int_en)
|
|
{
|
|
|
|
if (int_en)
|
|
/* Enable BSC CTL interrupt line */
|
|
dev->bsc_regmap->ctl_reg |= BSC_CTL_REG_INT_EN_MASK;
|
|
else
|
|
/* Disable BSC CTL interrupt line */
|
|
dev->bsc_regmap->ctl_reg &= ~BSC_CTL_REG_INT_EN_MASK;
|
|
|
|
barrier();
|
|
bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg);
|
|
}
|
|
|
|
static irqreturn_t brcmstb_i2c_isr(int irq, void *devid)
|
|
{
|
|
struct brcmstb_i2c_dev *dev = devid;
|
|
u32 status_bsc_ctl = bsc_readl(dev, ctl_reg);
|
|
u32 status_iic_intrp = bsc_readl(dev, iic_enable);
|
|
|
|
dev_dbg(dev->device, "isr CTL_REG %x IIC_EN %x\n",
|
|
status_bsc_ctl, status_iic_intrp);
|
|
|
|
if (!(status_bsc_ctl & BSC_CTL_REG_INT_EN_MASK))
|
|
return IRQ_NONE;
|
|
|
|
brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
|
|
complete_all(&dev->done);
|
|
|
|
dev_dbg(dev->device, "isr handled");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Wait for device to be ready */
|
|
static int brcmstb_i2c_wait_if_busy(struct brcmstb_i2c_dev *dev)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT);
|
|
|
|
while ((bsc_readl(dev, iic_enable) & BSC_IIC_EN_INTRP_MASK)) {
|
|
if (time_after(jiffies, timeout))
|
|
return -ETIMEDOUT;
|
|
cpu_relax();
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* i2c xfer completion function, handles both irq and polling mode */
|
|
static int brcmstb_i2c_wait_for_completion(struct brcmstb_i2c_dev *dev)
|
|
{
|
|
int ret = 0;
|
|
unsigned long timeout = msecs_to_jiffies(I2C_TIMEOUT);
|
|
|
|
if (dev->irq >= 0) {
|
|
if (!wait_for_completion_timeout(&dev->done, timeout))
|
|
ret = -ETIMEDOUT;
|
|
} else {
|
|
/* we are in polling mode */
|
|
u32 bsc_intrp;
|
|
unsigned long time_left = jiffies + timeout;
|
|
|
|
do {
|
|
bsc_intrp = bsc_readl(dev, iic_enable) &
|
|
BSC_IIC_EN_INTRP_MASK;
|
|
if (time_after(jiffies, time_left)) {
|
|
ret = -ETIMEDOUT;
|
|
break;
|
|
}
|
|
cpu_relax();
|
|
} while (!bsc_intrp);
|
|
}
|
|
|
|
if (dev->irq < 0 || ret == -ETIMEDOUT)
|
|
brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Set xfer START/STOP conditions for subsequent transfer */
|
|
static void brcmstb_set_i2c_start_stop(struct brcmstb_i2c_dev *dev,
|
|
u32 cond_flag)
|
|
{
|
|
u32 regval = dev->bsc_regmap->iic_enable;
|
|
|
|
dev->bsc_regmap->iic_enable = (regval & ~COND_START_STOP) | cond_flag;
|
|
}
|
|
|
|
/* Send I2C request check completion */
|
|
static int brcmstb_send_i2c_cmd(struct brcmstb_i2c_dev *dev,
|
|
enum bsc_xfer_cmd cmd)
|
|
{
|
|
int rc = 0;
|
|
struct bsc_regs *pi2creg = dev->bsc_regmap;
|
|
|
|
/* Make sure the hardware is ready */
|
|
rc = brcmstb_i2c_wait_if_busy(dev);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* only if we are in interrupt mode */
|
|
if (dev->irq >= 0)
|
|
reinit_completion(&dev->done);
|
|
|
|
/* enable BSC CTL interrupt line */
|
|
brcmstb_i2c_enable_disable_irq(dev, INT_ENABLE);
|
|
|
|
/* initiate transfer by setting iic_enable */
|
|
pi2creg->iic_enable |= BSC_IIC_EN_ENABLE_MASK;
|
|
bsc_writel(dev, pi2creg->iic_enable, iic_enable);
|
|
|
|
/* Wait for transaction to finish or timeout */
|
|
rc = brcmstb_i2c_wait_for_completion(dev);
|
|
if (rc) {
|
|
dev_dbg(dev->device, "intr timeout for cmd %s\n",
|
|
cmd_string[cmd]);
|
|
goto cmd_out;
|
|
}
|
|
|
|
if ((CMD_RD || CMD_WR) &&
|
|
bsc_readl(dev, iic_enable) & BSC_IIC_EN_NOACK_MASK) {
|
|
rc = -EREMOTEIO;
|
|
dev_dbg(dev->device, "controller received NOACK intr for %s\n",
|
|
cmd_string[cmd]);
|
|
}
|
|
|
|
cmd_out:
|
|
bsc_writel(dev, 0, cnt_reg);
|
|
bsc_writel(dev, 0, iic_enable);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* Actual data transfer through the BSC master */
|
|
static int brcmstb_i2c_xfer_bsc_data(struct brcmstb_i2c_dev *dev,
|
|
u8 *buf, unsigned int len,
|
|
struct i2c_msg *pmsg)
|
|
{
|
|
int cnt, byte, i, rc;
|
|
enum bsc_xfer_cmd cmd;
|
|
u32 ctl_reg;
|
|
struct bsc_regs *pi2creg = dev->bsc_regmap;
|
|
int no_ack = pmsg->flags & I2C_M_IGNORE_NAK;
|
|
int data_regsz = brcmstb_i2c_get_data_regsz(dev);
|
|
|
|
/* see if the transaction needs to check NACK conditions */
|
|
if (no_ack) {
|
|
cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD_NOACK
|
|
: CMD_WR_NOACK;
|
|
pi2creg->ctlhi_reg |= BSC_CTLHI_REG_IGNORE_ACK_MASK;
|
|
} else {
|
|
cmd = (pmsg->flags & I2C_M_RD) ? CMD_RD : CMD_WR;
|
|
pi2creg->ctlhi_reg &= ~BSC_CTLHI_REG_IGNORE_ACK_MASK;
|
|
}
|
|
bsc_writel(dev, pi2creg->ctlhi_reg, ctlhi_reg);
|
|
|
|
/* set data transfer direction */
|
|
ctl_reg = pi2creg->ctl_reg & ~BSC_CTL_REG_DTF_MASK;
|
|
if (cmd == CMD_WR || cmd == CMD_WR_NOACK)
|
|
pi2creg->ctl_reg = ctl_reg | DTF_WR_MASK;
|
|
else
|
|
pi2creg->ctl_reg = ctl_reg | DTF_RD_MASK;
|
|
|
|
/* set the read/write length */
|
|
bsc_writel(dev, BSC_CNT_REG1_MASK(data_regsz) &
|
|
(len << BSC_CNT_REG1_SHIFT), cnt_reg);
|
|
|
|
/* Write data into data_in register */
|
|
|
|
if (cmd == CMD_WR || cmd == CMD_WR_NOACK) {
|
|
for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) {
|
|
u32 word = 0;
|
|
|
|
for (byte = 0; byte < data_regsz; byte++) {
|
|
word >>= BITS_PER_BYTE;
|
|
if ((cnt + byte) < len)
|
|
word |= buf[cnt + byte] <<
|
|
(BITS_PER_BYTE * (data_regsz - 1));
|
|
}
|
|
bsc_writel(dev, word, data_in[i]);
|
|
}
|
|
}
|
|
|
|
/* Initiate xfer, the function will return on completion */
|
|
rc = brcmstb_send_i2c_cmd(dev, cmd);
|
|
|
|
if (rc != 0) {
|
|
dev_dbg(dev->device, "%s failure", cmd_string[cmd]);
|
|
return rc;
|
|
}
|
|
|
|
/* Read data from data_out register */
|
|
if (cmd == CMD_RD || cmd == CMD_RD_NOACK) {
|
|
for (cnt = 0, i = 0; cnt < len; cnt += data_regsz, i++) {
|
|
u32 data = bsc_readl(dev, data_out[i]);
|
|
|
|
for (byte = 0; byte < data_regsz &&
|
|
(byte + cnt) < len; byte++) {
|
|
buf[cnt + byte] = data & 0xff;
|
|
data >>= BITS_PER_BYTE;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Write a single byte of data to the i2c bus */
|
|
static int brcmstb_i2c_write_data_byte(struct brcmstb_i2c_dev *dev,
|
|
u8 *buf, unsigned int nak_expected)
|
|
{
|
|
enum bsc_xfer_cmd cmd = nak_expected ? CMD_WR : CMD_WR_NOACK;
|
|
|
|
bsc_writel(dev, 1, cnt_reg);
|
|
bsc_writel(dev, *buf, data_in);
|
|
|
|
return brcmstb_send_i2c_cmd(dev, cmd);
|
|
}
|
|
|
|
/* Send i2c address */
|
|
static int brcmstb_i2c_do_addr(struct brcmstb_i2c_dev *dev,
|
|
struct i2c_msg *msg)
|
|
{
|
|
unsigned char addr;
|
|
|
|
if (msg->flags & I2C_M_TEN) {
|
|
/* First byte is 11110XX0 where XX is upper 2 bits */
|
|
addr = 0xF0 | ((msg->addr & 0x300) >> 7);
|
|
bsc_writel(dev, addr, chip_address);
|
|
|
|
/* Second byte is the remaining 8 bits */
|
|
addr = msg->addr & 0xFF;
|
|
if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0)
|
|
return -EREMOTEIO;
|
|
|
|
if (msg->flags & I2C_M_RD) {
|
|
/* For read, send restart without stop condition */
|
|
brcmstb_set_i2c_start_stop(dev, COND_RESTART
|
|
| COND_NOSTOP);
|
|
/* Then re-send the first byte with the read bit set */
|
|
addr = 0xF0 | ((msg->addr & 0x300) >> 7) | 0x01;
|
|
if (brcmstb_i2c_write_data_byte(dev, &addr, 0) < 0)
|
|
return -EREMOTEIO;
|
|
|
|
}
|
|
} else {
|
|
addr = i2c_8bit_addr_from_msg(msg);
|
|
|
|
bsc_writel(dev, addr, chip_address);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Master transfer function */
|
|
static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
|
|
struct i2c_msg msgs[], int num)
|
|
{
|
|
struct brcmstb_i2c_dev *dev = i2c_get_adapdata(adapter);
|
|
struct i2c_msg *pmsg;
|
|
int rc = 0;
|
|
int i;
|
|
int bytes_to_xfer;
|
|
u8 *tmp_buf;
|
|
int len = 0;
|
|
int xfersz = brcmstb_i2c_get_xfersz(dev);
|
|
|
|
if (dev->is_suspended)
|
|
return -EBUSY;
|
|
|
|
/* Loop through all messages */
|
|
for (i = 0; i < num; i++) {
|
|
pmsg = &msgs[i];
|
|
len = pmsg->len;
|
|
tmp_buf = pmsg->buf;
|
|
|
|
dev_dbg(dev->device,
|
|
"msg# %d/%d flg %x buf %x len %d\n", i,
|
|
num - 1, pmsg->flags,
|
|
pmsg->buf ? pmsg->buf[0] : '0', pmsg->len);
|
|
|
|
if (i < (num - 1) && (msgs[i + 1].flags & I2C_M_NOSTART))
|
|
brcmstb_set_i2c_start_stop(dev, ~(COND_START_STOP));
|
|
else
|
|
brcmstb_set_i2c_start_stop(dev,
|
|
COND_RESTART | COND_NOSTOP);
|
|
|
|
/* Send slave address */
|
|
if (!(pmsg->flags & I2C_M_NOSTART)) {
|
|
rc = brcmstb_i2c_do_addr(dev, pmsg);
|
|
if (rc < 0) {
|
|
dev_dbg(dev->device,
|
|
"NACK for addr %2.2x msg#%d rc = %d\n",
|
|
pmsg->addr, i, rc);
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Perform data transfer */
|
|
while (len) {
|
|
bytes_to_xfer = min(len, xfersz);
|
|
|
|
if (len <= xfersz && i == (num - 1))
|
|
brcmstb_set_i2c_start_stop(dev,
|
|
~(COND_START_STOP));
|
|
|
|
rc = brcmstb_i2c_xfer_bsc_data(dev, tmp_buf,
|
|
bytes_to_xfer, pmsg);
|
|
if (rc < 0)
|
|
goto out;
|
|
|
|
len -= bytes_to_xfer;
|
|
tmp_buf += bytes_to_xfer;
|
|
}
|
|
}
|
|
|
|
rc = num;
|
|
out:
|
|
return rc;
|
|
|
|
}
|
|
|
|
static u32 brcmstb_i2c_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR
|
|
| I2C_FUNC_NOSTART | I2C_FUNC_PROTOCOL_MANGLING;
|
|
}
|
|
|
|
static const struct i2c_algorithm brcmstb_i2c_algo = {
|
|
.master_xfer = brcmstb_i2c_xfer,
|
|
.functionality = brcmstb_i2c_functionality,
|
|
};
|
|
|
|
static void brcmstb_i2c_set_bus_speed(struct brcmstb_i2c_dev *dev)
|
|
{
|
|
int i = 0, num_speeds = ARRAY_SIZE(bsc_clk);
|
|
u32 clk_freq_hz = dev->clk_freq_hz;
|
|
|
|
for (i = 0; i < num_speeds; i++) {
|
|
if (bsc_clk[i].hz == clk_freq_hz) {
|
|
dev->bsc_regmap->ctl_reg &= ~(BSC_CTL_REG_SCL_SEL_MASK
|
|
| BSC_CTL_REG_DIV_CLK_MASK);
|
|
dev->bsc_regmap->ctl_reg |= (bsc_clk[i].scl_mask |
|
|
bsc_clk[i].div_mask);
|
|
bsc_writel(dev, dev->bsc_regmap->ctl_reg, ctl_reg);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* in case we did not get find a valid speed */
|
|
if (i == num_speeds) {
|
|
i = (bsc_readl(dev, ctl_reg) & BSC_CTL_REG_SCL_SEL_MASK) >>
|
|
BSC_CTL_REG_SCL_SEL_SHIFT;
|
|
dev_warn(dev->device, "leaving current clock-frequency @ %dHz\n",
|
|
bsc_clk[i].hz);
|
|
}
|
|
}
|
|
|
|
static void brcmstb_i2c_set_bsc_reg_defaults(struct brcmstb_i2c_dev *dev)
|
|
{
|
|
if (brcmstb_i2c_get_data_regsz(dev) == sizeof(u32))
|
|
/* set 4 byte data in/out xfers */
|
|
dev->bsc_regmap->ctlhi_reg = BSC_CTLHI_REG_DATAREG_SIZE_MASK;
|
|
else
|
|
dev->bsc_regmap->ctlhi_reg &= ~BSC_CTLHI_REG_DATAREG_SIZE_MASK;
|
|
|
|
bsc_writel(dev, dev->bsc_regmap->ctlhi_reg, ctlhi_reg);
|
|
/* set bus speed */
|
|
brcmstb_i2c_set_bus_speed(dev);
|
|
}
|
|
|
|
static int brcmstb_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
int rc = 0;
|
|
struct brcmstb_i2c_dev *dev;
|
|
struct i2c_adapter *adap;
|
|
struct resource *iomem;
|
|
const char *int_name;
|
|
|
|
/* Allocate memory for private data structure */
|
|
dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
dev->bsc_regmap = devm_kzalloc(&pdev->dev, sizeof(*dev->bsc_regmap), GFP_KERNEL);
|
|
if (!dev->bsc_regmap)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, dev);
|
|
dev->device = &pdev->dev;
|
|
init_completion(&dev->done);
|
|
|
|
/* Map hardware registers */
|
|
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
dev->base = devm_ioremap_resource(dev->device, iomem);
|
|
if (IS_ERR(dev->base)) {
|
|
rc = -ENOMEM;
|
|
goto probe_errorout;
|
|
}
|
|
|
|
rc = of_property_read_string(dev->device->of_node, "interrupt-names",
|
|
&int_name);
|
|
if (rc < 0)
|
|
int_name = NULL;
|
|
|
|
/* Get the interrupt number */
|
|
dev->irq = platform_get_irq(pdev, 0);
|
|
|
|
/* disable the bsc interrupt line */
|
|
brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE);
|
|
|
|
/* register the ISR handler */
|
|
rc = devm_request_irq(&pdev->dev, dev->irq, brcmstb_i2c_isr,
|
|
IRQF_SHARED,
|
|
int_name ? int_name : pdev->name,
|
|
dev);
|
|
|
|
if (rc) {
|
|
dev_dbg(dev->device, "falling back to polling mode");
|
|
dev->irq = -1;
|
|
}
|
|
|
|
if (of_property_read_u32(dev->device->of_node,
|
|
"clock-frequency", &dev->clk_freq_hz)) {
|
|
dev_warn(dev->device, "setting clock-frequency@%dHz\n",
|
|
bsc_clk[0].hz);
|
|
dev->clk_freq_hz = bsc_clk[0].hz;
|
|
}
|
|
|
|
/* set the data in/out register size for compatible SoCs */
|
|
if (of_device_is_compatible(dev->device->of_node,
|
|
"brcmstb,brcmper-i2c"))
|
|
dev->data_regsz = sizeof(u8);
|
|
else
|
|
dev->data_regsz = sizeof(u32);
|
|
|
|
brcmstb_i2c_set_bsc_reg_defaults(dev);
|
|
|
|
/* Add the i2c adapter */
|
|
adap = &dev->adapter;
|
|
i2c_set_adapdata(adap, dev);
|
|
adap->owner = THIS_MODULE;
|
|
strlcpy(adap->name, "Broadcom STB : ", sizeof(adap->name));
|
|
if (int_name)
|
|
strlcat(adap->name, int_name, sizeof(adap->name));
|
|
adap->algo = &brcmstb_i2c_algo;
|
|
adap->dev.parent = &pdev->dev;
|
|
adap->dev.of_node = pdev->dev.of_node;
|
|
rc = i2c_add_adapter(adap);
|
|
if (rc) {
|
|
dev_err(dev->device, "failed to add adapter\n");
|
|
goto probe_errorout;
|
|
}
|
|
|
|
dev_info(dev->device, "%s@%dhz registered in %s mode\n",
|
|
int_name ? int_name : " ", dev->clk_freq_hz,
|
|
(dev->irq >= 0) ? "interrupt" : "polling");
|
|
|
|
return 0;
|
|
|
|
probe_errorout:
|
|
return rc;
|
|
}
|
|
|
|
static int brcmstb_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct brcmstb_i2c_dev *dev = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(&dev->adapter);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int brcmstb_i2c_suspend(struct device *dev)
|
|
{
|
|
struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev);
|
|
|
|
i2c_lock_adapter(&i2c_dev->adapter);
|
|
i2c_dev->is_suspended = true;
|
|
i2c_unlock_adapter(&i2c_dev->adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcmstb_i2c_resume(struct device *dev)
|
|
{
|
|
struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev);
|
|
|
|
i2c_lock_adapter(&i2c_dev->adapter);
|
|
brcmstb_i2c_set_bsc_reg_defaults(i2c_dev);
|
|
i2c_dev->is_suspended = false;
|
|
i2c_unlock_adapter(&i2c_dev->adapter);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(brcmstb_i2c_pm, brcmstb_i2c_suspend,
|
|
brcmstb_i2c_resume);
|
|
|
|
static const struct of_device_id brcmstb_i2c_of_match[] = {
|
|
{.compatible = "brcm,brcmstb-i2c"},
|
|
{.compatible = "brcm,brcmper-i2c"},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, brcmstb_i2c_of_match);
|
|
|
|
static struct platform_driver brcmstb_i2c_driver = {
|
|
.driver = {
|
|
.name = "brcmstb-i2c",
|
|
.of_match_table = brcmstb_i2c_of_match,
|
|
.pm = &brcmstb_i2c_pm,
|
|
},
|
|
.probe = brcmstb_i2c_probe,
|
|
.remove = brcmstb_i2c_remove,
|
|
};
|
|
module_platform_driver(brcmstb_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Kamal Dasu <kdasu@broadcom.com>");
|
|
MODULE_DESCRIPTION("Broadcom Settop I2C Driver");
|
|
MODULE_LICENSE("GPL v2");
|