linux/drivers/i2c/busses/i2c-designware-pcidrv.c

350 lines
8.6 KiB
C

/*
* Synopsys DesignWare I2C adapter driver (master only).
*
* Based on the TI DAVINCI I2C adapter driver.
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
* Copyright (C) 2011, 2015, 2016 Intel Corporation.
*
* ----------------------------------------------------------------------------
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* ----------------------------------------------------------------------------
*
*/
#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include "i2c-designware-core.h"
#define DRIVER_NAME "i2c-designware-pci"
enum dw_pci_ctl_id_t {
medfield,
merrifield,
baytrail,
haswell,
};
struct dw_scl_sda_cfg {
u32 ss_hcnt;
u32 fs_hcnt;
u32 ss_lcnt;
u32 fs_lcnt;
u32 sda_hold;
};
struct dw_pci_controller {
u32 bus_num;
u32 bus_cfg;
u32 tx_fifo_depth;
u32 rx_fifo_depth;
u32 clk_khz;
u32 functionality;
struct dw_scl_sda_cfg *scl_sda_cfg;
int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c);
};
#define INTEL_MID_STD_CFG (DW_IC_CON_MASTER | \
DW_IC_CON_SLAVE_DISABLE | \
DW_IC_CON_RESTART_EN)
#define DW_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \
I2C_FUNC_SMBUS_BYTE | \
I2C_FUNC_SMBUS_BYTE_DATA | \
I2C_FUNC_SMBUS_WORD_DATA | \
I2C_FUNC_SMBUS_I2C_BLOCK)
/* Merrifield HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg mrfld_config = {
.ss_hcnt = 0x2f8,
.fs_hcnt = 0x87,
.ss_lcnt = 0x37b,
.fs_lcnt = 0x10a,
};
/* BayTrail HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg byt_config = {
.ss_hcnt = 0x200,
.fs_hcnt = 0x55,
.ss_lcnt = 0x200,
.fs_lcnt = 0x99,
.sda_hold = 0x6,
};
/* Haswell HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg hsw_config = {
.ss_hcnt = 0x01b0,
.fs_hcnt = 0x48,
.ss_lcnt = 0x01fb,
.fs_lcnt = 0xa0,
.sda_hold = 0x9,
};
static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
{
switch (pdev->device) {
case 0x0817:
c->bus_cfg &= ~DW_IC_CON_SPEED_MASK;
c->bus_cfg |= DW_IC_CON_SPEED_STD;
case 0x0818:
case 0x0819:
c->bus_num = pdev->device - 0x817 + 3;
return 0;
case 0x082C:
case 0x082D:
case 0x082E:
c->bus_num = pdev->device - 0x82C + 0;
return 0;
}
return -ENODEV;
}
static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
{
/*
* On Intel Merrifield the user visible i2c busses are enumerated
* [1..7]. So, we add 1 to shift the default range. Besides that the
* first PCI slot provides 4 functions, that's why we have to add 0 to
* the first slot and 4 to the next one.
*/
switch (PCI_SLOT(pdev->devfn)) {
case 8:
c->bus_num = PCI_FUNC(pdev->devfn) + 0 + 1;
return 0;
case 9:
c->bus_num = PCI_FUNC(pdev->devfn) + 4 + 1;
return 0;
}
return -ENODEV;
}
static struct dw_pci_controller dw_pci_controllers[] = {
[medfield] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.clk_khz = 25000,
.setup = mfld_setup,
},
[merrifield] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 64,
.rx_fifo_depth = 64,
.scl_sda_cfg = &mrfld_config,
.setup = mrfld_setup,
},
[baytrail] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &byt_config,
},
[haswell] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &hsw_config,
},
};
#ifdef CONFIG_PM
static int i2c_dw_pci_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
i2c_dw_disable(pci_get_drvdata(pdev));
return 0;
}
static int i2c_dw_pci_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
return i2c_dw_init(pci_get_drvdata(pdev));
}
#endif
static UNIVERSAL_DEV_PM_OPS(i2c_dw_pm_ops, i2c_dw_pci_suspend,
i2c_dw_pci_resume, NULL);
static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
{
return dev->controller->clk_khz;
}
static int i2c_dw_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
int r;
struct dw_pci_controller *controller;
struct dw_scl_sda_cfg *cfg;
if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
dev_err(&pdev->dev, "%s: invalid driver data %ld\n", __func__,
id->driver_data);
return -EINVAL;
}
controller = &dw_pci_controllers[id->driver_data];
r = pcim_enable_device(pdev);
if (r) {
dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n",
r);
return r;
}
r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
if (r) {
dev_err(&pdev->dev, "I/O memory remapping failed\n");
return r;
}
dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
dev->clk = NULL;
dev->controller = controller;
dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
dev->base = pcim_iomap_table(pdev)[0];
dev->dev = &pdev->dev;
dev->irq = pdev->irq;
if (controller->setup) {
r = controller->setup(pdev, controller);
if (r)
return r;
}
dev->functionality = controller->functionality |
DW_DEFAULT_FUNCTIONALITY;
dev->master_cfg = controller->bus_cfg;
if (controller->scl_sda_cfg) {
cfg = controller->scl_sda_cfg;
dev->ss_hcnt = cfg->ss_hcnt;
dev->fs_hcnt = cfg->fs_hcnt;
dev->ss_lcnt = cfg->ss_lcnt;
dev->fs_lcnt = cfg->fs_lcnt;
dev->sda_hold_time = cfg->sda_hold;
}
pci_set_drvdata(pdev, dev);
dev->tx_fifo_depth = controller->tx_fifo_depth;
dev->rx_fifo_depth = controller->rx_fifo_depth;
adap = &dev->adapter;
adap->owner = THIS_MODULE;
adap->class = 0;
ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
adap->nr = controller->bus_num;
r = i2c_dw_probe(dev);
if (r)
return r;
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
pm_runtime_allow(&pdev->dev);
return 0;
}
static void i2c_dw_pci_remove(struct pci_dev *pdev)
{
struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
i2c_dw_disable(dev);
pm_runtime_forbid(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
i2c_del_adapter(&dev->adapter);
}
/* work with hotplug and coldplug */
MODULE_ALIAS("i2c_designware-pci");
static const struct pci_device_id i2_designware_pci_ids[] = {
/* Medfield */
{ PCI_VDEVICE(INTEL, 0x0817), medfield },
{ PCI_VDEVICE(INTEL, 0x0818), medfield },
{ PCI_VDEVICE(INTEL, 0x0819), medfield },
{ PCI_VDEVICE(INTEL, 0x082C), medfield },
{ PCI_VDEVICE(INTEL, 0x082D), medfield },
{ PCI_VDEVICE(INTEL, 0x082E), medfield },
/* Merrifield */
{ PCI_VDEVICE(INTEL, 0x1195), merrifield },
{ PCI_VDEVICE(INTEL, 0x1196), merrifield },
/* Baytrail */
{ PCI_VDEVICE(INTEL, 0x0F41), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F42), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F43), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F44), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F45), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F46), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F47), baytrail },
/* Haswell */
{ PCI_VDEVICE(INTEL, 0x9c61), haswell },
{ PCI_VDEVICE(INTEL, 0x9c62), haswell },
/* Braswell / Cherrytrail */
{ PCI_VDEVICE(INTEL, 0x22C1), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C2), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C3), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C4), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C5), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C6), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C7), baytrail },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
static struct pci_driver dw_i2c_driver = {
.name = DRIVER_NAME,
.id_table = i2_designware_pci_ids,
.probe = i2c_dw_pci_probe,
.remove = i2c_dw_pci_remove,
.driver = {
.pm = &i2c_dw_pm_ops,
},
};
module_pci_driver(dw_i2c_driver);
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
MODULE_LICENSE("GPL");