mirror of https://gitee.com/openkylin/linux.git
427 lines
11 KiB
C
427 lines
11 KiB
C
/*
|
|
* Renesas RIIC driver
|
|
*
|
|
* Copyright (C) 2013 Wolfram Sang <wsa@sang-engineering.com>
|
|
* Copyright (C) 2013 Renesas Solutions Corp.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
|
|
/*
|
|
* This i2c core has a lot of interrupts, namely 8. We use their chaining as
|
|
* some kind of state machine.
|
|
*
|
|
* 1) The main xfer routine kicks off a transmission by putting the start bit
|
|
* (or repeated start) on the bus and enabling the transmit interrupt (TIE)
|
|
* since we need to send the slave address + RW bit in every case.
|
|
*
|
|
* 2) TIE sends slave address + RW bit and selects how to continue.
|
|
*
|
|
* 3a) Write case: We keep utilizing TIE as long as we have data to send. If we
|
|
* are done, we switch over to the transmission done interrupt (TEIE) and mark
|
|
* the message as completed (includes sending STOP) there.
|
|
*
|
|
* 3b) Read case: We switch over to receive interrupt (RIE). One dummy read is
|
|
* needed to start clocking, then we keep receiving until we are done. Note
|
|
* that we use the RDRFS mode all the time, i.e. we ACK/NACK every byte by
|
|
* writing to the ACKBT bit. I tried using the RDRFS mode only at the end of a
|
|
* message to create the final NACK as sketched in the datasheet. This caused
|
|
* some subtle races (when byte n was processed and byte n+1 was already
|
|
* waiting), though, and I started with the safe approach.
|
|
*
|
|
* 4) If we got a NACK somewhere, we flag the error and stop the transmission
|
|
* via NAKIE.
|
|
*
|
|
* Also check the comments in the interrupt routines for some gory details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define RIIC_ICCR1 0x00
|
|
#define RIIC_ICCR2 0x04
|
|
#define RIIC_ICMR1 0x08
|
|
#define RIIC_ICMR3 0x10
|
|
#define RIIC_ICSER 0x18
|
|
#define RIIC_ICIER 0x1c
|
|
#define RIIC_ICSR2 0x24
|
|
#define RIIC_ICBRL 0x34
|
|
#define RIIC_ICBRH 0x38
|
|
#define RIIC_ICDRT 0x3c
|
|
#define RIIC_ICDRR 0x40
|
|
|
|
#define ICCR1_ICE 0x80
|
|
#define ICCR1_IICRST 0x40
|
|
#define ICCR1_SOWP 0x10
|
|
|
|
#define ICCR2_BBSY 0x80
|
|
#define ICCR2_SP 0x08
|
|
#define ICCR2_RS 0x04
|
|
#define ICCR2_ST 0x02
|
|
|
|
#define ICMR1_CKS_MASK 0x70
|
|
#define ICMR1_BCWP 0x08
|
|
#define ICMR1_CKS(_x) ((((_x) << 4) & ICMR1_CKS_MASK) | ICMR1_BCWP)
|
|
|
|
#define ICMR3_RDRFS 0x20
|
|
#define ICMR3_ACKWP 0x10
|
|
#define ICMR3_ACKBT 0x08
|
|
|
|
#define ICIER_TIE 0x80
|
|
#define ICIER_TEIE 0x40
|
|
#define ICIER_RIE 0x20
|
|
#define ICIER_NAKIE 0x10
|
|
|
|
#define ICSR2_NACKF 0x10
|
|
|
|
/* ICBRx (@ PCLK 33MHz) */
|
|
#define ICBR_RESERVED 0xe0 /* Should be 1 on writes */
|
|
#define ICBRL_SP100K (19 | ICBR_RESERVED)
|
|
#define ICBRH_SP100K (16 | ICBR_RESERVED)
|
|
#define ICBRL_SP400K (21 | ICBR_RESERVED)
|
|
#define ICBRH_SP400K (9 | ICBR_RESERVED)
|
|
|
|
#define RIIC_INIT_MSG -1
|
|
|
|
struct riic_dev {
|
|
void __iomem *base;
|
|
u8 *buf;
|
|
struct i2c_msg *msg;
|
|
int bytes_left;
|
|
int err;
|
|
int is_last;
|
|
struct completion msg_done;
|
|
struct i2c_adapter adapter;
|
|
struct clk *clk;
|
|
};
|
|
|
|
struct riic_irq_desc {
|
|
int res_num;
|
|
irq_handler_t isr;
|
|
char *name;
|
|
};
|
|
|
|
static inline void riic_clear_set_bit(struct riic_dev *riic, u8 clear, u8 set, u8 reg)
|
|
{
|
|
writeb((readb(riic->base + reg) & ~clear) | set, riic->base + reg);
|
|
}
|
|
|
|
static int riic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
|
|
{
|
|
struct riic_dev *riic = i2c_get_adapdata(adap);
|
|
unsigned long time_left;
|
|
int i, ret;
|
|
u8 start_bit;
|
|
|
|
ret = clk_prepare_enable(riic->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (readb(riic->base + RIIC_ICCR2) & ICCR2_BBSY) {
|
|
riic->err = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
reinit_completion(&riic->msg_done);
|
|
riic->err = 0;
|
|
|
|
writeb(0, riic->base + RIIC_ICSR2);
|
|
|
|
for (i = 0, start_bit = ICCR2_ST; i < num; i++) {
|
|
riic->bytes_left = RIIC_INIT_MSG;
|
|
riic->buf = msgs[i].buf;
|
|
riic->msg = &msgs[i];
|
|
riic->is_last = (i == num - 1);
|
|
|
|
writeb(ICIER_NAKIE | ICIER_TIE, riic->base + RIIC_ICIER);
|
|
|
|
writeb(start_bit, riic->base + RIIC_ICCR2);
|
|
|
|
time_left = wait_for_completion_timeout(&riic->msg_done, riic->adapter.timeout);
|
|
if (time_left == 0)
|
|
riic->err = -ETIMEDOUT;
|
|
|
|
if (riic->err)
|
|
break;
|
|
|
|
start_bit = ICCR2_RS;
|
|
}
|
|
|
|
out:
|
|
clk_disable_unprepare(riic->clk);
|
|
|
|
return riic->err ?: num;
|
|
}
|
|
|
|
static irqreturn_t riic_tdre_isr(int irq, void *data)
|
|
{
|
|
struct riic_dev *riic = data;
|
|
u8 val;
|
|
|
|
if (!riic->bytes_left)
|
|
return IRQ_NONE;
|
|
|
|
if (riic->bytes_left == RIIC_INIT_MSG) {
|
|
val = !!(riic->msg->flags & I2C_M_RD);
|
|
if (val)
|
|
/* On read, switch over to receive interrupt */
|
|
riic_clear_set_bit(riic, ICIER_TIE, ICIER_RIE, RIIC_ICIER);
|
|
else
|
|
/* On write, initialize length */
|
|
riic->bytes_left = riic->msg->len;
|
|
|
|
val |= (riic->msg->addr << 1);
|
|
} else {
|
|
val = *riic->buf;
|
|
riic->buf++;
|
|
riic->bytes_left--;
|
|
}
|
|
|
|
/*
|
|
* Switch to transmission ended interrupt when done. Do check here
|
|
* after bytes_left was initialized to support SMBUS_QUICK (new msg has
|
|
* 0 length then)
|
|
*/
|
|
if (riic->bytes_left == 0)
|
|
riic_clear_set_bit(riic, ICIER_TIE, ICIER_TEIE, RIIC_ICIER);
|
|
|
|
/*
|
|
* This acks the TIE interrupt. We get another TIE immediately if our
|
|
* value could be moved to the shadow shift register right away. So
|
|
* this must be after updates to ICIER (where we want to disable TIE)!
|
|
*/
|
|
writeb(val, riic->base + RIIC_ICDRT);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t riic_tend_isr(int irq, void *data)
|
|
{
|
|
struct riic_dev *riic = data;
|
|
|
|
if (readb(riic->base + RIIC_ICSR2) & ICSR2_NACKF) {
|
|
/* We got a NACKIE */
|
|
readb(riic->base + RIIC_ICDRR); /* dummy read */
|
|
riic->err = -ENXIO;
|
|
} else if (riic->bytes_left) {
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (riic->is_last || riic->err)
|
|
writeb(ICCR2_SP, riic->base + RIIC_ICCR2);
|
|
|
|
writeb(0, riic->base + RIIC_ICIER);
|
|
complete(&riic->msg_done);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t riic_rdrf_isr(int irq, void *data)
|
|
{
|
|
struct riic_dev *riic = data;
|
|
|
|
if (!riic->bytes_left)
|
|
return IRQ_NONE;
|
|
|
|
if (riic->bytes_left == RIIC_INIT_MSG) {
|
|
riic->bytes_left = riic->msg->len;
|
|
readb(riic->base + RIIC_ICDRR); /* dummy read */
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (riic->bytes_left == 1) {
|
|
/* STOP must come before we set ACKBT! */
|
|
if (riic->is_last)
|
|
writeb(ICCR2_SP, riic->base + RIIC_ICCR2);
|
|
|
|
riic_clear_set_bit(riic, 0, ICMR3_ACKBT, RIIC_ICMR3);
|
|
|
|
writeb(0, riic->base + RIIC_ICIER);
|
|
complete(&riic->msg_done);
|
|
} else {
|
|
riic_clear_set_bit(riic, ICMR3_ACKBT, 0, RIIC_ICMR3);
|
|
}
|
|
|
|
/* Reading acks the RIE interrupt */
|
|
*riic->buf = readb(riic->base + RIIC_ICDRR);
|
|
riic->buf++;
|
|
riic->bytes_left--;
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static u32 riic_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm riic_algo = {
|
|
.master_xfer = riic_xfer,
|
|
.functionality = riic_func,
|
|
};
|
|
|
|
static int riic_init_hw(struct riic_dev *riic, u32 spd)
|
|
{
|
|
int ret;
|
|
unsigned long rate;
|
|
|
|
ret = clk_prepare_enable(riic->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* TODO: Implement formula to calculate the timing values depending on
|
|
* variable parent clock rate and arbitrary bus speed
|
|
*/
|
|
rate = clk_get_rate(riic->clk);
|
|
if (rate != 33325000) {
|
|
dev_err(&riic->adapter.dev,
|
|
"invalid parent clk (%lu). Must be 33325000Hz\n", rate);
|
|
clk_disable_unprepare(riic->clk);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Changing the order of accessing IICRST and ICE may break things! */
|
|
writeb(ICCR1_IICRST | ICCR1_SOWP, riic->base + RIIC_ICCR1);
|
|
riic_clear_set_bit(riic, 0, ICCR1_ICE, RIIC_ICCR1);
|
|
|
|
switch (spd) {
|
|
case 100000:
|
|
writeb(ICMR1_CKS(3), riic->base + RIIC_ICMR1);
|
|
writeb(ICBRH_SP100K, riic->base + RIIC_ICBRH);
|
|
writeb(ICBRL_SP100K, riic->base + RIIC_ICBRL);
|
|
break;
|
|
case 400000:
|
|
writeb(ICMR1_CKS(1), riic->base + RIIC_ICMR1);
|
|
writeb(ICBRH_SP400K, riic->base + RIIC_ICBRH);
|
|
writeb(ICBRL_SP400K, riic->base + RIIC_ICBRL);
|
|
break;
|
|
default:
|
|
dev_err(&riic->adapter.dev,
|
|
"unsupported bus speed (%dHz). Use 100000 or 400000\n", spd);
|
|
clk_disable_unprepare(riic->clk);
|
|
return -EINVAL;
|
|
}
|
|
|
|
writeb(0, riic->base + RIIC_ICSER);
|
|
writeb(ICMR3_ACKWP | ICMR3_RDRFS, riic->base + RIIC_ICMR3);
|
|
|
|
riic_clear_set_bit(riic, ICCR1_IICRST, 0, RIIC_ICCR1);
|
|
|
|
clk_disable_unprepare(riic->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct riic_irq_desc riic_irqs[] = {
|
|
{ .res_num = 0, .isr = riic_tend_isr, .name = "riic-tend" },
|
|
{ .res_num = 1, .isr = riic_rdrf_isr, .name = "riic-rdrf" },
|
|
{ .res_num = 2, .isr = riic_tdre_isr, .name = "riic-tdre" },
|
|
{ .res_num = 5, .isr = riic_tend_isr, .name = "riic-nack" },
|
|
};
|
|
|
|
static int riic_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct riic_dev *riic;
|
|
struct i2c_adapter *adap;
|
|
struct resource *res;
|
|
u32 bus_rate = 0;
|
|
int i, ret;
|
|
|
|
riic = devm_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL);
|
|
if (!riic)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
riic->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(riic->base))
|
|
return PTR_ERR(riic->base);
|
|
|
|
riic->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(riic->clk)) {
|
|
dev_err(&pdev->dev, "missing controller clock");
|
|
return PTR_ERR(riic->clk);
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(riic_irqs); i++) {
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, riic_irqs[i].res_num);
|
|
if (!res)
|
|
return -ENODEV;
|
|
|
|
ret = devm_request_irq(&pdev->dev, res->start, riic_irqs[i].isr,
|
|
0, riic_irqs[i].name, riic);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to request irq %s\n", riic_irqs[i].name);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
adap = &riic->adapter;
|
|
i2c_set_adapdata(adap, riic);
|
|
strlcpy(adap->name, "Renesas RIIC adapter", sizeof(adap->name));
|
|
adap->owner = THIS_MODULE;
|
|
adap->algo = &riic_algo;
|
|
adap->dev.parent = &pdev->dev;
|
|
adap->dev.of_node = pdev->dev.of_node;
|
|
|
|
init_completion(&riic->msg_done);
|
|
|
|
of_property_read_u32(np, "clock-frequency", &bus_rate);
|
|
ret = riic_init_hw(riic, bus_rate);
|
|
if (ret)
|
|
return ret;
|
|
|
|
|
|
ret = i2c_add_adapter(adap);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add adapter\n");
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, riic);
|
|
|
|
dev_info(&pdev->dev, "registered with %dHz bus speed\n", bus_rate);
|
|
return 0;
|
|
}
|
|
|
|
static int riic_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct riic_dev *riic = platform_get_drvdata(pdev);
|
|
|
|
writeb(0, riic->base + RIIC_ICIER);
|
|
i2c_del_adapter(&riic->adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id riic_i2c_dt_ids[] = {
|
|
{ .compatible = "renesas,riic-rz" },
|
|
{ /* Sentinel */ },
|
|
};
|
|
|
|
static struct platform_driver riic_i2c_driver = {
|
|
.probe = riic_i2c_probe,
|
|
.remove = riic_i2c_remove,
|
|
.driver = {
|
|
.name = "i2c-riic",
|
|
.of_match_table = riic_i2c_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(riic_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Renesas RIIC adapter");
|
|
MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DEVICE_TABLE(of, riic_i2c_dt_ids);
|