mirror of https://gitee.com/openkylin/linux.git
40 lines
1.3 KiB
Plaintext
40 lines
1.3 KiB
Plaintext
* Renesas R-Car generation 3 USB 2.0 PHY
|
|
|
|
This file provides information on what the device node for the R-Car generation
|
|
3 USB 2.0 PHY contains.
|
|
|
|
Required properties:
|
|
- compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
|
|
SoC.
|
|
- reg: offset and length of the partial USB 2.0 Host register block.
|
|
- reg-names: must be "usb2_host".
|
|
- clocks: clock phandle and specifier pair(s).
|
|
- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
|
|
|
|
Optional properties:
|
|
To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
|
|
combined, the device tree node should set HSUSB properties to reg and reg-names
|
|
properties. This is because HSUSB has registers to select USB 2.0 host or
|
|
peripheral at that channel:
|
|
- reg: offset and length of the partial HSUSB register block.
|
|
- reg-names: must be "hsusb".
|
|
- interrupts: interrupt specifier for the PHY.
|
|
|
|
Example (R-Car H3):
|
|
|
|
usb-phy@ee080200 {
|
|
compatible = "renesas,usb2-phy-r8a7795";
|
|
reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>;
|
|
reg-names = "usb2_host", "hsusb";
|
|
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp7_clks R8A7795_CLK_EHCI0>,
|
|
<&mstp7_clks R8A7795_CLK_HSUSB>;
|
|
};
|
|
|
|
usb-phy@ee0a0200 {
|
|
compatible = "renesas,usb2-phy-r8a7795";
|
|
reg = <0 0xee0a0200 0 0x700>;
|
|
reg-names = "usb2_host";
|
|
clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
|
|
};
|