mirror of https://gitee.com/openkylin/linux.git
553 lines
13 KiB
C
553 lines
13 KiB
C
/*
|
|
* File: arch/blackfin/mach-bf561/acvilon.c
|
|
* Based on: arch/blackfin/mach-bf561/ezkit.c
|
|
* Author:
|
|
*
|
|
* Created:
|
|
* Description:
|
|
*
|
|
* Modified:
|
|
* Copyright 2004-2006 Analog Devices Inc.
|
|
* Copyright 2009 CJSC "NII STT"
|
|
*
|
|
* Bugs:
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see the file COPYING, or write
|
|
* to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*
|
|
* For more information about Acvilon BF561 SoM please
|
|
* go to http://www.niistt.ru/
|
|
*
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/plat-ram.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/flash.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c-pca-platform.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/bfin5xx_spi.h>
|
|
#include <asm/portmux.h>
|
|
#include <asm/dpmc.h>
|
|
#include <asm/cacheflush.h>
|
|
#include <linux/i2c.h>
|
|
|
|
/*
|
|
* Name the Board for the /proc/cpuinfo
|
|
*/
|
|
const char bfin_board_name[] = "Acvilon board";
|
|
|
|
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
|
|
#include <linux/usb/isp1760.h>
|
|
static struct resource bfin_isp1760_resources[] = {
|
|
[0] = {
|
|
.start = 0x20000000,
|
|
.end = 0x20000000 + 0x000fffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_PF15,
|
|
.end = IRQ_PF15,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
|
|
},
|
|
};
|
|
|
|
static struct isp1760_platform_data isp1760_priv = {
|
|
.is_isp1761 = 0,
|
|
.port1_disable = 0,
|
|
.bus_width_16 = 1,
|
|
.port1_otg = 0,
|
|
.analog_oc = 0,
|
|
.dack_polarity_high = 0,
|
|
.dreq_polarity_high = 0,
|
|
};
|
|
|
|
static struct platform_device bfin_isp1760_device = {
|
|
.name = "isp1760-hcd",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &isp1760_priv,
|
|
},
|
|
.num_resources = ARRAY_SIZE(bfin_isp1760_resources),
|
|
.resource = bfin_isp1760_resources,
|
|
};
|
|
#endif
|
|
|
|
static struct resource bfin_i2c_pca_resources[] = {
|
|
{
|
|
.name = "pca9564-regs",
|
|
.start = 0x2C000000,
|
|
.end = 0x2C000000 + 16,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
|
|
}, {
|
|
|
|
.start = IRQ_PF8,
|
|
.end = IRQ_PF8,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
|
|
},
|
|
};
|
|
|
|
struct i2c_pca9564_pf_platform_data pca9564_platform_data = {
|
|
.gpio = -1,
|
|
.i2c_clock_speed = 330000,
|
|
.timeout = HZ,
|
|
};
|
|
|
|
/* PCA9564 I2C Bus driver */
|
|
static struct platform_device bfin_i2c_pca_device = {
|
|
.name = "i2c-pca-platform",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(bfin_i2c_pca_resources),
|
|
.resource = bfin_i2c_pca_resources,
|
|
.dev = {
|
|
.platform_data = &pca9564_platform_data,
|
|
}
|
|
};
|
|
|
|
/* I2C devices fitted. */
|
|
static struct i2c_board_info acvilon_i2c_devs[] __initdata = {
|
|
{
|
|
I2C_BOARD_INFO("ds1339", 0x68),
|
|
},
|
|
{
|
|
I2C_BOARD_INFO("tcn75", 0x49),
|
|
},
|
|
};
|
|
|
|
#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
|
|
static struct platdata_mtd_ram mtd_ram_data = {
|
|
.mapname = "rootfs(RAM)",
|
|
.bankwidth = 4,
|
|
};
|
|
|
|
static struct resource mtd_ram_resource = {
|
|
.start = 0x4000000,
|
|
.end = 0x5ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device mtd_ram_device = {
|
|
.name = "mtd-ram",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &mtd_ram_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &mtd_ram_resource,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
|
|
#include <linux/smsc911x.h>
|
|
static struct resource smsc911x_resources[] = {
|
|
{
|
|
.name = "smsc911x-memory",
|
|
.start = 0x28000000,
|
|
.end = 0x28000000 + 0xFF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_PF7,
|
|
.end = IRQ_PF7,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
|
|
},
|
|
};
|
|
|
|
static struct smsc911x_platform_config smsc911x_config = {
|
|
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
|
|
.phy_interface = PHY_INTERFACE_MODE_MII,
|
|
};
|
|
|
|
static struct platform_device smsc911x_device = {
|
|
.name = "smsc911x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smsc911x_resources),
|
|
.resource = smsc911x_resources,
|
|
.dev = {
|
|
.platform_data = &smsc911x_config,
|
|
},
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
|
|
#ifdef CONFIG_SERIAL_BFIN_UART0
|
|
static struct resource bfin_uart0_resources[] = {
|
|
{
|
|
.start = BFIN_UART_THR,
|
|
.end = BFIN_UART_GCTL + 2,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_UART_RX,
|
|
.end = IRQ_UART_RX + 1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = IRQ_UART_ERROR,
|
|
.end = IRQ_UART_ERROR,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = CH_UART_TX,
|
|
.end = CH_UART_TX,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
{
|
|
.start = CH_UART_RX,
|
|
.end = CH_UART_RX,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
};
|
|
|
|
unsigned short bfin_uart0_peripherals[] = {
|
|
P_UART0_TX, P_UART0_RX, 0
|
|
};
|
|
|
|
static struct platform_device bfin_uart0_device = {
|
|
.name = "bfin-uart",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(bfin_uart0_resources),
|
|
.resource = bfin_uart0_resources,
|
|
.dev = {
|
|
/* Passed to driver */
|
|
.platform_data = &bfin_uart0_peripherals,
|
|
},
|
|
};
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
const char *part_probes[] = { "cmdlinepart", NULL };
|
|
|
|
static struct mtd_partition bfin_plat_nand_partitions[] = {
|
|
{
|
|
.name = "params(nand)",
|
|
.size = 32 * 1024 * 1024,
|
|
.offset = 0,
|
|
}, {
|
|
.name = "userfs(nand)",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
},
|
|
};
|
|
#endif
|
|
|
|
#define BFIN_NAND_PLAT_CLE 2
|
|
#define BFIN_NAND_PLAT_ALE 3
|
|
|
|
static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
|
|
unsigned int ctrl)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
|
|
if (cmd == NAND_CMD_NONE)
|
|
return;
|
|
|
|
if (ctrl & NAND_CLE)
|
|
writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
|
|
else
|
|
writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
|
|
}
|
|
|
|
#define BFIN_NAND_PLAT_READY GPIO_PF10
|
|
static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
|
|
{
|
|
return gpio_get_value(BFIN_NAND_PLAT_READY);
|
|
}
|
|
|
|
static struct platform_nand_data bfin_plat_nand_data = {
|
|
.chip = {
|
|
.chip_delay = 30,
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
.part_probe_types = part_probes,
|
|
.partitions = bfin_plat_nand_partitions,
|
|
.nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
|
|
#endif
|
|
},
|
|
.ctrl = {
|
|
.cmd_ctrl = bfin_plat_nand_cmd_ctrl,
|
|
.dev_ready = bfin_plat_nand_dev_ready,
|
|
},
|
|
};
|
|
|
|
#define MAX(x, y) (x > y ? x : y)
|
|
static struct resource bfin_plat_nand_resources = {
|
|
.start = 0x24000000,
|
|
.end = 0x24000000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
|
|
.flags = IORESOURCE_IO,
|
|
};
|
|
|
|
static struct platform_device bfin_async_nand_device = {
|
|
.name = "gen_nand",
|
|
.id = -1,
|
|
.num_resources = 1,
|
|
.resource = &bfin_plat_nand_resources,
|
|
.dev = {
|
|
.platform_data = &bfin_plat_nand_data,
|
|
},
|
|
};
|
|
|
|
static void bfin_plat_nand_init(void)
|
|
{
|
|
gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
|
|
}
|
|
#else
|
|
static void bfin_plat_nand_init(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
|
|
static struct mtd_partition bfin_spi_dataflash_partitions[] = {
|
|
{
|
|
.name = "bootloader",
|
|
.size = 0x4200,
|
|
.offset = 0,
|
|
.mask_flags = MTD_CAP_ROM},
|
|
{
|
|
.name = "u-boot",
|
|
.size = 0x42000,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
},
|
|
{
|
|
.name = "u-boot(params)",
|
|
.size = 0x4200,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
},
|
|
{
|
|
.name = "kernel",
|
|
.size = 0x294000,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
},
|
|
{
|
|
.name = "params",
|
|
.size = 0x42000,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
},
|
|
{
|
|
.name = "rootfs",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = MTDPART_OFS_APPEND,
|
|
}
|
|
};
|
|
|
|
static struct flash_platform_data bfin_spi_dataflash_data = {
|
|
.name = "SPI Dataflash",
|
|
.parts = bfin_spi_dataflash_partitions,
|
|
.nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
|
|
};
|
|
|
|
/* DataFlash chip */
|
|
static struct bfin5xx_spi_chip data_flash_chip_info = {
|
|
.enable_dma = 0, /* use dma transfer with this chip */
|
|
.bits_per_word = 8,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
|
|
static struct bfin5xx_spi_chip spidev_chip_info = {
|
|
.enable_dma = 0,
|
|
.bits_per_word = 8,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
|
|
/* SPI (0) */
|
|
static struct resource bfin_spi0_resource[] = {
|
|
[0] = {
|
|
.start = SPI0_REGBASE,
|
|
.end = SPI0_REGBASE + 0xFF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = CH_SPI,
|
|
.end = CH_SPI,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
[2] = {
|
|
.start = IRQ_SPI,
|
|
.end = IRQ_SPI,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
/* SPI controller data */
|
|
static struct bfin5xx_spi_master bfin_spi0_info = {
|
|
.num_chipselect = 8,
|
|
.enable_dma = 1, /* master has the ability to do dma transfer */
|
|
.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
|
|
};
|
|
|
|
static struct platform_device bfin_spi0_device = {
|
|
.name = "bfin-spi",
|
|
.id = 0, /* Bus number */
|
|
.num_resources = ARRAY_SIZE(bfin_spi0_resource),
|
|
.resource = bfin_spi0_resource,
|
|
.dev = {
|
|
.platform_data = &bfin_spi0_info, /* Passed to driver */
|
|
},
|
|
};
|
|
#endif
|
|
|
|
static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
|
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
|
|
{
|
|
.modalias = "spidev",
|
|
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
|
|
.bus_num = 0,
|
|
.chip_select = 3,
|
|
.controller_data = &spidev_chip_info,
|
|
},
|
|
#endif
|
|
#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
|
|
{ /* DataFlash chip */
|
|
.modalias = "mtd_dataflash",
|
|
.max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
|
|
.bus_num = 0, /* Framework bus number */
|
|
.chip_select = 2, /* Framework chip select */
|
|
.platform_data = &bfin_spi_dataflash_data,
|
|
.controller_data = &data_flash_chip_info,
|
|
.mode = SPI_MODE_3,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static struct resource bfin_gpios_resources = {
|
|
.start = 31,
|
|
/* .end = MAX_BLACKFIN_GPIOS - 1, */
|
|
.end = 32,
|
|
.flags = IORESOURCE_IRQ,
|
|
};
|
|
|
|
static struct platform_device bfin_gpios_device = {
|
|
.name = "simple-gpio",
|
|
.id = -1,
|
|
.num_resources = 1,
|
|
.resource = &bfin_gpios_resources,
|
|
};
|
|
|
|
static const unsigned int cclk_vlev_datasheet[] = {
|
|
VRPAIR(VLEV_085, 250000000),
|
|
VRPAIR(VLEV_090, 300000000),
|
|
VRPAIR(VLEV_095, 313000000),
|
|
VRPAIR(VLEV_100, 350000000),
|
|
VRPAIR(VLEV_105, 400000000),
|
|
VRPAIR(VLEV_110, 444000000),
|
|
VRPAIR(VLEV_115, 450000000),
|
|
VRPAIR(VLEV_120, 475000000),
|
|
VRPAIR(VLEV_125, 500000000),
|
|
VRPAIR(VLEV_130, 600000000),
|
|
};
|
|
|
|
static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
|
|
.tuple_tab = cclk_vlev_datasheet,
|
|
.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
|
|
.vr_settling_time = 25 /* us */ ,
|
|
};
|
|
|
|
static struct platform_device bfin_dpmc = {
|
|
.name = "bfin dpmc",
|
|
.dev = {
|
|
.platform_data = &bfin_dmpc_vreg_data,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *acvilon_devices[] __initdata = {
|
|
&bfin_dpmc,
|
|
|
|
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
|
|
&bfin_spi0_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
|
|
#ifdef CONFIG_SERIAL_BFIN_UART0
|
|
&bfin_uart0_device,
|
|
#endif
|
|
#endif
|
|
|
|
&bfin_gpios_device,
|
|
|
|
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
|
|
&smsc911x_device,
|
|
#endif
|
|
|
|
&bfin_i2c_pca_device,
|
|
|
|
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
|
|
&bfin_async_nand_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
|
|
&mtd_ram_device,
|
|
#endif
|
|
|
|
};
|
|
|
|
static int __init acvilon_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk(KERN_INFO "%s(): registering device resources\n", __func__);
|
|
|
|
bfin_plat_nand_init();
|
|
ret =
|
|
platform_add_devices(acvilon_devices, ARRAY_SIZE(acvilon_devices));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
i2c_register_board_info(0, acvilon_i2c_devs,
|
|
ARRAY_SIZE(acvilon_i2c_devs));
|
|
|
|
bfin_write_FIO0_FLAG_C(1 << 14);
|
|
msleep(5);
|
|
bfin_write_FIO0_FLAG_S(1 << 14);
|
|
|
|
spi_register_board_info(bfin_spi_board_info,
|
|
ARRAY_SIZE(bfin_spi_board_info));
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(acvilon_init);
|
|
|
|
static struct platform_device *acvilon_early_devices[] __initdata = {
|
|
#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
|
|
#ifdef CONFIG_SERIAL_BFIN_UART0
|
|
&bfin_uart0_device,
|
|
#endif
|
|
#endif
|
|
};
|
|
|
|
void __init native_machine_early_platform_add_devices(void)
|
|
{
|
|
printk(KERN_INFO "register early platform devices\n");
|
|
early_platform_add_devices(acvilon_early_devices,
|
|
ARRAY_SIZE(acvilon_early_devices));
|
|
}
|