mirror of https://gitee.com/openkylin/linux.git
440 lines
11 KiB
C
440 lines
11 KiB
C
/*
|
|
* arch/arm/mach-ixp23xx/core.c
|
|
*
|
|
* Core routines for IXP23xx chips
|
|
*
|
|
* Author: Deepak Saxena <dsaxena@plexity.net>
|
|
*
|
|
* Copyright 2005 (c) MontaVista Software, Inc.
|
|
*
|
|
* Based on 2.4 code Copyright 2004 (c) Intel Corporation
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/time.h>
|
|
#include <linux/timex.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/system.h>
|
|
#include <asm/tlbflush.h>
|
|
#include <asm/pgtable.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/arch.h>
|
|
|
|
|
|
/*************************************************************************
|
|
* Chip specific mappings shared by all IXP23xx systems
|
|
*************************************************************************/
|
|
static struct map_desc ixp23xx_io_desc[] __initdata = {
|
|
{ /* XSI-CPP CSRs */
|
|
.virtual = IXP23XX_XSI2CPP_CSR_VIRT,
|
|
.pfn = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
|
|
.length = IXP23XX_XSI2CPP_CSR_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, { /* Expansion Bus Config */
|
|
.virtual = IXP23XX_EXP_CFG_VIRT,
|
|
.pfn = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
|
|
.length = IXP23XX_EXP_CFG_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
|
|
.virtual = IXP23XX_PERIPHERAL_VIRT,
|
|
.pfn = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
|
|
.length = IXP23XX_PERIPHERAL_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, { /* CAP CSRs */
|
|
.virtual = IXP23XX_CAP_CSR_VIRT,
|
|
.pfn = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
|
|
.length = IXP23XX_CAP_CSR_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, { /* MSF CSRs */
|
|
.virtual = IXP23XX_MSF_CSR_VIRT,
|
|
.pfn = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
|
|
.length = IXP23XX_MSF_CSR_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, { /* PCI I/O Space */
|
|
.virtual = IXP23XX_PCI_IO_VIRT,
|
|
.pfn = __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
|
|
.length = IXP23XX_PCI_IO_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, { /* PCI Config Space */
|
|
.virtual = IXP23XX_PCI_CFG_VIRT,
|
|
.pfn = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
|
|
.length = IXP23XX_PCI_CFG_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, { /* PCI local CFG CSRs */
|
|
.virtual = IXP23XX_PCI_CREG_VIRT,
|
|
.pfn = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
|
|
.length = IXP23XX_PCI_CREG_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, { /* PCI MEM Space */
|
|
.virtual = IXP23XX_PCI_MEM_VIRT,
|
|
.pfn = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
|
|
.length = IXP23XX_PCI_MEM_SIZE,
|
|
.type = MT_DEVICE,
|
|
}
|
|
};
|
|
|
|
void __init ixp23xx_map_io(void)
|
|
{
|
|
iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
|
|
}
|
|
|
|
|
|
/***************************************************************************
|
|
* IXP23xx Interrupt Handling
|
|
***************************************************************************/
|
|
enum ixp23xx_irq_type {
|
|
IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
|
|
};
|
|
|
|
static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
|
|
|
|
static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
|
|
{
|
|
int line = irq - IRQ_IXP23XX_GPIO6 + 6;
|
|
u32 int_style;
|
|
enum ixp23xx_irq_type irq_type;
|
|
volatile u32 *int_reg;
|
|
|
|
/*
|
|
* Only GPIOs 6-15 are wired to interrupts on IXP23xx
|
|
*/
|
|
if (line < 6 || line > 15)
|
|
return -EINVAL;
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
|
|
irq_type = IXP23XX_IRQ_EDGE;
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
|
|
irq_type = IXP23XX_IRQ_EDGE;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
|
|
irq_type = IXP23XX_IRQ_EDGE;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
|
|
irq_type = IXP23XX_IRQ_LEVEL;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
|
|
irq_type = IXP23XX_IRQ_LEVEL;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ixp23xx_config_irq(irq, irq_type);
|
|
|
|
if (line >= 8) { /* pins 8-15 */
|
|
line -= 8;
|
|
int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
|
|
} else { /* pins 0-7 */
|
|
int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
|
|
}
|
|
|
|
/*
|
|
* Clear pending interrupts
|
|
*/
|
|
*IXP23XX_GPIO_GPISR = (1 << line);
|
|
|
|
/* Clear the style for the appropriate pin */
|
|
*int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
|
|
(line * IXP23XX_GPIO_STYLE_SIZE));
|
|
|
|
/* Set the new style */
|
|
*int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ixp23xx_irq_mask(unsigned int irq)
|
|
{
|
|
volatile unsigned long *intr_reg;
|
|
|
|
if (irq >= 56)
|
|
irq += 8;
|
|
|
|
intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
|
|
*intr_reg &= ~(1 << (irq % 32));
|
|
}
|
|
|
|
static void ixp23xx_irq_ack(unsigned int irq)
|
|
{
|
|
int line = irq - IRQ_IXP23XX_GPIO6 + 6;
|
|
|
|
if ((line < 6) || (line > 15))
|
|
return;
|
|
|
|
*IXP23XX_GPIO_GPISR = (1 << line);
|
|
}
|
|
|
|
/*
|
|
* Level triggered interrupts on GPIO lines can only be cleared when the
|
|
* interrupt condition disappears.
|
|
*/
|
|
static void ixp23xx_irq_level_unmask(unsigned int irq)
|
|
{
|
|
volatile unsigned long *intr_reg;
|
|
|
|
ixp23xx_irq_ack(irq);
|
|
|
|
if (irq >= 56)
|
|
irq += 8;
|
|
|
|
intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
|
|
*intr_reg |= (1 << (irq % 32));
|
|
}
|
|
|
|
static void ixp23xx_irq_edge_unmask(unsigned int irq)
|
|
{
|
|
volatile unsigned long *intr_reg;
|
|
|
|
if (irq >= 56)
|
|
irq += 8;
|
|
|
|
intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
|
|
*intr_reg |= (1 << (irq % 32));
|
|
}
|
|
|
|
static struct irq_chip ixp23xx_irq_level_chip = {
|
|
.ack = ixp23xx_irq_mask,
|
|
.mask = ixp23xx_irq_mask,
|
|
.unmask = ixp23xx_irq_level_unmask,
|
|
.set_type = ixp23xx_irq_set_type
|
|
};
|
|
|
|
static struct irq_chip ixp23xx_irq_edge_chip = {
|
|
.ack = ixp23xx_irq_ack,
|
|
.mask = ixp23xx_irq_mask,
|
|
.unmask = ixp23xx_irq_edge_unmask,
|
|
.set_type = ixp23xx_irq_set_type
|
|
};
|
|
|
|
static void ixp23xx_pci_irq_mask(unsigned int irq)
|
|
{
|
|
*IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
|
|
}
|
|
|
|
static void ixp23xx_pci_irq_unmask(unsigned int irq)
|
|
{
|
|
*IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
|
|
}
|
|
|
|
/*
|
|
* TODO: Should this just be done at ASM level?
|
|
*/
|
|
static void pci_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
u32 pci_interrupt;
|
|
unsigned int irqno;
|
|
|
|
pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
|
|
|
|
desc->chip->ack(irq);
|
|
|
|
/* See which PCI_INTA, or PCI_INTB interrupted */
|
|
if (pci_interrupt & (1 << 26)) {
|
|
irqno = IRQ_IXP23XX_INTB;
|
|
} else if (pci_interrupt & (1 << 27)) {
|
|
irqno = IRQ_IXP23XX_INTA;
|
|
} else {
|
|
BUG();
|
|
}
|
|
|
|
generic_handle_irq(irqno);
|
|
|
|
desc->chip->unmask(irq);
|
|
}
|
|
|
|
static struct irq_chip ixp23xx_pci_irq_chip = {
|
|
.ack = ixp23xx_pci_irq_mask,
|
|
.mask = ixp23xx_pci_irq_mask,
|
|
.unmask = ixp23xx_pci_irq_unmask
|
|
};
|
|
|
|
static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
|
|
{
|
|
switch (type) {
|
|
case IXP23XX_IRQ_LEVEL:
|
|
set_irq_chip(irq, &ixp23xx_irq_level_chip);
|
|
set_irq_handler(irq, handle_level_irq);
|
|
break;
|
|
case IXP23XX_IRQ_EDGE:
|
|
set_irq_chip(irq, &ixp23xx_irq_edge_chip);
|
|
set_irq_handler(irq, handle_edge_irq);
|
|
break;
|
|
}
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
}
|
|
|
|
void __init ixp23xx_init_irq(void)
|
|
{
|
|
int irq;
|
|
|
|
/* Route everything to IRQ */
|
|
*IXP23XX_INTR_SEL1 = 0x0;
|
|
*IXP23XX_INTR_SEL2 = 0x0;
|
|
*IXP23XX_INTR_SEL3 = 0x0;
|
|
*IXP23XX_INTR_SEL4 = 0x0;
|
|
|
|
/* Mask all sources */
|
|
*IXP23XX_INTR_EN1 = 0x0;
|
|
*IXP23XX_INTR_EN2 = 0x0;
|
|
*IXP23XX_INTR_EN3 = 0x0;
|
|
*IXP23XX_INTR_EN4 = 0x0;
|
|
|
|
/*
|
|
* Configure all IRQs for level-sensitive operation
|
|
*/
|
|
for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
|
|
ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
|
|
}
|
|
|
|
for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
|
|
set_irq_chip(irq, &ixp23xx_pci_irq_chip);
|
|
set_irq_handler(irq, handle_level_irq);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
}
|
|
|
|
set_irq_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* Timer-tick functions for IXP23xx
|
|
*************************************************************************/
|
|
#define CLOCK_TICKS_PER_USEC (CLOCK_TICK_RATE / USEC_PER_SEC)
|
|
|
|
static unsigned long next_jiffy_time;
|
|
|
|
static unsigned long
|
|
ixp23xx_gettimeoffset(void)
|
|
{
|
|
unsigned long elapsed;
|
|
|
|
elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
|
|
|
|
return elapsed / CLOCK_TICKS_PER_USEC;
|
|
}
|
|
|
|
static irqreturn_t
|
|
ixp23xx_timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
/* Clear Pending Interrupt by writing '1' to it */
|
|
*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
|
|
while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) {
|
|
timer_tick();
|
|
next_jiffy_time += LATCH;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction ixp23xx_timer_irq = {
|
|
.name = "IXP23xx Timer Tick",
|
|
.handler = ixp23xx_timer_interrupt,
|
|
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
|
};
|
|
|
|
void __init ixp23xx_init_timer(void)
|
|
{
|
|
/* Clear Pending Interrupt by writing '1' to it */
|
|
*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
|
|
|
|
/* Setup the Timer counter value */
|
|
*IXP23XX_TIMER1_RELOAD =
|
|
(LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
|
|
|
|
*IXP23XX_TIMER_CONT = 0;
|
|
next_jiffy_time = LATCH;
|
|
|
|
/* Connect the interrupt handler and enable the interrupt */
|
|
setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
|
|
}
|
|
|
|
struct sys_timer ixp23xx_timer = {
|
|
.init = ixp23xx_init_timer,
|
|
.offset = ixp23xx_gettimeoffset,
|
|
};
|
|
|
|
|
|
/*************************************************************************
|
|
* IXP23xx Platform Initialization
|
|
*************************************************************************/
|
|
static struct resource ixp23xx_uart_resources[] = {
|
|
{
|
|
.start = IXP23XX_UART1_PHYS,
|
|
.end = IXP23XX_UART1_PHYS + 0x0fff,
|
|
.flags = IORESOURCE_MEM
|
|
}, {
|
|
.start = IXP23XX_UART2_PHYS,
|
|
.end = IXP23XX_UART2_PHYS + 0x0fff,
|
|
.flags = IORESOURCE_MEM
|
|
}
|
|
};
|
|
|
|
static struct plat_serial8250_port ixp23xx_uart_data[] = {
|
|
{
|
|
.mapbase = IXP23XX_UART1_PHYS,
|
|
.membase = (char *)(IXP23XX_UART1_VIRT + 3),
|
|
.irq = IRQ_IXP23XX_UART1,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 2,
|
|
.uartclk = IXP23XX_UART_XTAL,
|
|
}, {
|
|
.mapbase = IXP23XX_UART2_PHYS,
|
|
.membase = (char *)(IXP23XX_UART2_VIRT + 3),
|
|
.irq = IRQ_IXP23XX_UART2,
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 2,
|
|
.uartclk = IXP23XX_UART_XTAL,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct platform_device ixp23xx_uart = {
|
|
.name = "serial8250",
|
|
.id = 0,
|
|
.dev.platform_data = ixp23xx_uart_data,
|
|
.num_resources = 2,
|
|
.resource = ixp23xx_uart_resources,
|
|
};
|
|
|
|
static struct platform_device *ixp23xx_devices[] __initdata = {
|
|
&ixp23xx_uart,
|
|
};
|
|
|
|
void __init ixp23xx_sys_init(void)
|
|
{
|
|
*IXP23XX_EXP_UNIT_FUSE |= 0xf;
|
|
platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
|
|
}
|