mirror of https://gitee.com/openkylin/linux.git
55 lines
1.3 KiB
Plaintext
55 lines
1.3 KiB
Plaintext
STMicroelectronics MEMS sensors
|
|
|
|
The STMicroelectronics sensor devices are pretty straight-forward I2C or
|
|
SPI devices, all sharing the same device tree descriptions no matter what
|
|
type of sensor it is.
|
|
|
|
Required properties:
|
|
- compatible: see the list of valid compatible strings below
|
|
- reg: the I2C or SPI address the device will respond to
|
|
|
|
Optional properties:
|
|
- vdd-supply: an optional regulator that needs to be on to provide VDD
|
|
power to the sensor.
|
|
- vddio-supply: an optional regulator that needs to be on to provide the
|
|
VDD IO power to the sensor.
|
|
- st,drdy-int-pin: the pin on the package that will be used to signal
|
|
"data ready" (valid values: 1 or 2). This property is not configurable
|
|
on all sensors.
|
|
|
|
Sensors may also have applicable pin control settings, those use the
|
|
standard bindings from pinctrl/pinctrl-bindings.txt.
|
|
|
|
Valid compatible strings:
|
|
|
|
Accelerometers:
|
|
- st,lsm303dlh-accel
|
|
- st,lsm303dlhc-accel
|
|
- st,lis3dh-accel
|
|
- st,lsm330d-accel
|
|
- st,lsm330dl-accel
|
|
- st,lsm330dlc-accel
|
|
- st,lis331dlh-accel
|
|
- st,lsm303dl-accel
|
|
- st,lsm303dlm-accel
|
|
- st,lsm330-accel
|
|
|
|
Gyroscopes:
|
|
- st,l3g4200d-gyro
|
|
- st,lsm330d-gyro
|
|
- st,lsm330dl-gyro
|
|
- st,lsm330dlc-gyro
|
|
- st,l3gd20-gyro
|
|
- st,l3g4is-gyro
|
|
- st,lsm330-gyro
|
|
|
|
Magnetometers:
|
|
- st,lsm303dlhc-magn
|
|
- st,lsm303dlm-magn
|
|
- st,lis3mdl-magn
|
|
|
|
Pressure sensors:
|
|
- st,lps001wp-press
|
|
- st,lps25h-press
|
|
- st,lps331ap-press
|