mirror of https://gitee.com/openkylin/linux.git
179 lines
3.6 KiB
ReStructuredText
179 lines
3.6 KiB
ReStructuredText
Kernel driver tps53679
|
|
======================
|
|
|
|
Supported chips:
|
|
|
|
* Texas Instruments TPS53647
|
|
|
|
Prefix: 'tps53647'
|
|
|
|
Addresses scanned: -
|
|
|
|
Datasheet: https://www.ti.com/lit/gpn/tps53647
|
|
|
|
* Texas Instruments TPS53667
|
|
|
|
Prefix: 'tps53667'
|
|
|
|
Addresses scanned: -
|
|
|
|
Datasheet: https://www.ti.com/lit/gpn/TPS53667
|
|
|
|
* Texas Instruments TPS53679
|
|
|
|
Prefix: 'tps53679'
|
|
|
|
Addresses scanned: -
|
|
|
|
Datasheet: https://www.ti.com/lit/gpn/TPS53679 (short version)
|
|
|
|
* Texas Instruments TPS53681
|
|
|
|
Prefix: 'tps53681'
|
|
|
|
Addresses scanned: -
|
|
|
|
Datasheet: https://www.ti.com/lit/gpn/TPS53681
|
|
|
|
* Texas Instruments TPS53688
|
|
|
|
Prefix: 'tps53688'
|
|
|
|
Addresses scanned: -
|
|
|
|
Datasheet: Available under NDA
|
|
|
|
|
|
Authors:
|
|
Vadim Pasternak <vadimp@mellanox.com>
|
|
Guenter Roeck <linux@roeck-us.net>
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
Chips in this series are multi-phase step-down converters with one or two
|
|
output channels and up to 8 phases per channel.
|
|
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
This driver does not probe for PMBus devices. You will have to instantiate
|
|
devices explicitly.
|
|
|
|
Example: the following commands will load the driver for an TPS53681 at address
|
|
0x60 on I2C bus #1::
|
|
|
|
# modprobe tps53679
|
|
# echo tps53681 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
|
|
|
|
|
|
Sysfs attributes
|
|
----------------
|
|
|
|
======================= ========================================================
|
|
in1_label "vin"
|
|
|
|
in1_input Measured input voltage.
|
|
|
|
in1_lcrit Critical minimum input voltage
|
|
|
|
TPS53679, TPS53681, TPS53688 only.
|
|
|
|
in1_lcrit_alarm Input voltage critical low alarm.
|
|
|
|
TPS53679, TPS53681, TPS53688 only.
|
|
|
|
in1_crit Critical maximum input voltage.
|
|
|
|
in1_crit_alarm Input voltage critical high alarm.
|
|
|
|
in[N]_label "vout[1-2]"
|
|
|
|
- TPS53647, TPS53667: N=2
|
|
- TPS53679, TPS53588: N=2,3
|
|
|
|
in[N]_input Measured output voltage.
|
|
|
|
in[N]_lcrit Critical minimum input voltage.
|
|
|
|
TPS53679, TPS53681, TPS53688 only.
|
|
|
|
in[N]_lcrit_alarm Critical minimum voltage alarm.
|
|
|
|
TPS53679, TPS53681, TPS53688 only.
|
|
|
|
in[N]_alarm Output voltage alarm.
|
|
|
|
TPS53647, TPS53667 only.
|
|
|
|
in[N]_crit Critical maximum output voltage.
|
|
|
|
TPS53679, TPS53681, TPS53688 only.
|
|
|
|
in[N]_crit_alarm Output voltage critical high alarm.
|
|
|
|
TPS53679, TPS53681, TPS53688 only.
|
|
|
|
temp[N]_input Measured temperature.
|
|
|
|
- TPS53647, TPS53667: N=1
|
|
- TPS53679, TPS53681, TPS53588: N=1,2
|
|
|
|
temp[N]_max Maximum temperature.
|
|
|
|
temp[N]_crit Critical high temperature.
|
|
|
|
temp[N]_max_alarm Temperature high alarm.
|
|
|
|
temp[N]_crit_alarm Temperature critical high alarm.
|
|
|
|
power1_label "pin".
|
|
|
|
power1_input Measured input power.
|
|
|
|
power[N]_label "pout[1-2]".
|
|
|
|
- TPS53647, TPS53667: N=2
|
|
- TPS53679, TPS53681, TPS53588: N=2,3
|
|
|
|
power[N]_input Measured output power.
|
|
|
|
curr1_label "iin".
|
|
|
|
curr1_input Measured input current.
|
|
|
|
curr1_max Maximum input current.
|
|
|
|
curr1_max_alarm Input current high alarm.
|
|
|
|
curr1_crit Critical input current.
|
|
|
|
curr1_crit_alarm Input current critical alarm.
|
|
|
|
curr[N]_label "iout[1-2]" or "iout1.[0-5]".
|
|
|
|
The first digit is the output channel, the second
|
|
digit is the phase within the channel. Per-phase
|
|
telemetry supported on TPS53681 only.
|
|
|
|
- TPS53647, TPS53667: N=2
|
|
- TPS53679, TPS53588: N=2,3
|
|
- TPS53681: N=2-9
|
|
|
|
curr[N]_input Measured output current.
|
|
|
|
curr[N]_max Maximum output current.
|
|
|
|
curr[N]_crit Critical high output current.
|
|
|
|
curr[N]_max_alarm Output current high alarm.
|
|
|
|
curr[N]_crit_alarm Output current critical high alarm.
|
|
|
|
Limit and alarm attributes are only available for
|
|
non-phase telemetry (iout1, iout2).
|
|
|
|
======================= ========================================================
|