mirror of https://gitee.com/openkylin/linux.git
714 lines
19 KiB
C
714 lines
19 KiB
C
/*
|
|
* Texas Instruments DSPS platforms "glue layer"
|
|
*
|
|
* Copyright (C) 2012, by Texas Instruments
|
|
*
|
|
* Based on the am35x "glue layer" code.
|
|
*
|
|
* This file is part of the Inventra Controller Driver for Linux.
|
|
*
|
|
* The Inventra Controller Driver for Linux is free software; you
|
|
* can redistribute it and/or modify it under the terms of the GNU
|
|
* General Public License version 2 as published by the Free Software
|
|
* Foundation.
|
|
*
|
|
* The Inventra Controller Driver for Linux is distributed in
|
|
* the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
|
* without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
|
|
* License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with The Inventra Controller Driver for Linux ; if not,
|
|
* write to the Free Software Foundation, Inc., 59 Temple Place,
|
|
* Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* musb_dsps.c will be a common file for all the TI DSPS platforms
|
|
* such as dm64x, dm36x, dm35x, da8x, am35x and ti81x.
|
|
* For now only ti81x is using this and in future davinci.c, am35x.c
|
|
* da8xx.c would be merged to this file after testing.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_address.h>
|
|
|
|
#include <plat/usb.h>
|
|
|
|
#include "musb_core.h"
|
|
|
|
/**
|
|
* avoid using musb_readx()/musb_writex() as glue layer should not be
|
|
* dependent on musb core layer symbols.
|
|
*/
|
|
static inline u8 dsps_readb(const void __iomem *addr, unsigned offset)
|
|
{ return __raw_readb(addr + offset); }
|
|
|
|
static inline u32 dsps_readl(const void __iomem *addr, unsigned offset)
|
|
{ return __raw_readl(addr + offset); }
|
|
|
|
static inline void dsps_writeb(void __iomem *addr, unsigned offset, u8 data)
|
|
{ __raw_writeb(data, addr + offset); }
|
|
|
|
static inline void dsps_writel(void __iomem *addr, unsigned offset, u32 data)
|
|
{ __raw_writel(data, addr + offset); }
|
|
|
|
/**
|
|
* DSPS musb wrapper register offset.
|
|
* FIXME: This should be expanded to have all the wrapper registers from TI DSPS
|
|
* musb ips.
|
|
*/
|
|
struct dsps_musb_wrapper {
|
|
u16 revision;
|
|
u16 control;
|
|
u16 status;
|
|
u16 eoi;
|
|
u16 epintr_set;
|
|
u16 epintr_clear;
|
|
u16 epintr_status;
|
|
u16 coreintr_set;
|
|
u16 coreintr_clear;
|
|
u16 coreintr_status;
|
|
u16 phy_utmi;
|
|
u16 mode;
|
|
|
|
/* bit positions for control */
|
|
unsigned reset:5;
|
|
|
|
/* bit positions for interrupt */
|
|
unsigned usb_shift:5;
|
|
u32 usb_mask;
|
|
u32 usb_bitmap;
|
|
unsigned drvvbus:5;
|
|
|
|
unsigned txep_shift:5;
|
|
u32 txep_mask;
|
|
u32 txep_bitmap;
|
|
|
|
unsigned rxep_shift:5;
|
|
u32 rxep_mask;
|
|
u32 rxep_bitmap;
|
|
|
|
/* bit positions for phy_utmi */
|
|
unsigned otg_disable:5;
|
|
|
|
/* bit positions for mode */
|
|
unsigned iddig:5;
|
|
/* miscellaneous stuff */
|
|
u32 musb_core_offset;
|
|
u8 poll_seconds;
|
|
};
|
|
|
|
/**
|
|
* DSPS glue structure.
|
|
*/
|
|
struct dsps_glue {
|
|
struct device *dev;
|
|
struct platform_device *musb; /* child musb pdev */
|
|
const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
|
|
struct timer_list timer; /* otg_workaround timer */
|
|
};
|
|
|
|
/**
|
|
* dsps_musb_enable - enable interrupts
|
|
*/
|
|
static void dsps_musb_enable(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct platform_device *pdev = to_platform_device(dev->parent);
|
|
struct dsps_glue *glue = platform_get_drvdata(pdev);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
void __iomem *reg_base = musb->ctrl_base;
|
|
u32 epmask, coremask;
|
|
|
|
/* Workaround: setup IRQs through both register sets. */
|
|
epmask = ((musb->epmask & wrp->txep_mask) << wrp->txep_shift) |
|
|
((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift);
|
|
coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF);
|
|
|
|
dsps_writel(reg_base, wrp->epintr_set, epmask);
|
|
dsps_writel(reg_base, wrp->coreintr_set, coremask);
|
|
/* Force the DRVVBUS IRQ so we can start polling for ID change. */
|
|
if (is_otg_enabled(musb))
|
|
dsps_writel(reg_base, wrp->coreintr_set,
|
|
(1 << wrp->drvvbus) << wrp->usb_shift);
|
|
}
|
|
|
|
/**
|
|
* dsps_musb_disable - disable HDRC and flush interrupts
|
|
*/
|
|
static void dsps_musb_disable(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct platform_device *pdev = to_platform_device(dev->parent);
|
|
struct dsps_glue *glue = platform_get_drvdata(pdev);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
void __iomem *reg_base = musb->ctrl_base;
|
|
|
|
dsps_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
|
|
dsps_writel(reg_base, wrp->epintr_clear,
|
|
wrp->txep_bitmap | wrp->rxep_bitmap);
|
|
dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
|
|
dsps_writel(reg_base, wrp->eoi, 0);
|
|
}
|
|
|
|
static void otg_timer(unsigned long _musb)
|
|
{
|
|
struct musb *musb = (void *)_musb;
|
|
void __iomem *mregs = musb->mregs;
|
|
struct device *dev = musb->controller;
|
|
struct platform_device *pdev = to_platform_device(dev->parent);
|
|
struct dsps_glue *glue = platform_get_drvdata(pdev);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
u8 devctl;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* We poll because DSPS IP's won't expose several OTG-critical
|
|
* status change events (from the transceiver) otherwise.
|
|
*/
|
|
devctl = dsps_readb(mregs, MUSB_DEVCTL);
|
|
dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
|
|
otg_state_string(musb->xceiv->state));
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
switch (musb->xceiv->state) {
|
|
case OTG_STATE_A_WAIT_BCON:
|
|
devctl &= ~MUSB_DEVCTL_SESSION;
|
|
dsps_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
|
|
|
devctl = dsps_readb(musb->mregs, MUSB_DEVCTL);
|
|
if (devctl & MUSB_DEVCTL_BDEVICE) {
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
MUSB_DEV_MODE(musb);
|
|
} else {
|
|
musb->xceiv->state = OTG_STATE_A_IDLE;
|
|
MUSB_HST_MODE(musb);
|
|
}
|
|
break;
|
|
case OTG_STATE_A_WAIT_VFALL:
|
|
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
|
|
dsps_writel(musb->ctrl_base, wrp->coreintr_set,
|
|
MUSB_INTR_VBUSERROR << wrp->usb_shift);
|
|
break;
|
|
case OTG_STATE_B_IDLE:
|
|
if (!is_peripheral_enabled(musb))
|
|
break;
|
|
|
|
devctl = dsps_readb(mregs, MUSB_DEVCTL);
|
|
if (devctl & MUSB_DEVCTL_BDEVICE)
|
|
mod_timer(&glue->timer,
|
|
jiffies + wrp->poll_seconds * HZ);
|
|
else
|
|
musb->xceiv->state = OTG_STATE_A_IDLE;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
}
|
|
|
|
static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct platform_device *pdev = to_platform_device(dev->parent);
|
|
struct dsps_glue *glue = platform_get_drvdata(pdev);
|
|
static unsigned long last_timer;
|
|
|
|
if (!is_otg_enabled(musb))
|
|
return;
|
|
|
|
if (timeout == 0)
|
|
timeout = jiffies + msecs_to_jiffies(3);
|
|
|
|
/* Never idle if active, or when VBUS timeout is not set as host */
|
|
if (musb->is_active || (musb->a_wait_bcon == 0 &&
|
|
musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
|
|
dev_dbg(musb->controller, "%s active, deleting timer\n",
|
|
otg_state_string(musb->xceiv->state));
|
|
del_timer(&glue->timer);
|
|
last_timer = jiffies;
|
|
return;
|
|
}
|
|
|
|
if (time_after(last_timer, timeout) && timer_pending(&glue->timer)) {
|
|
dev_dbg(musb->controller,
|
|
"Longer idle timer already pending, ignoring...\n");
|
|
return;
|
|
}
|
|
last_timer = timeout;
|
|
|
|
dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
|
|
otg_state_string(musb->xceiv->state),
|
|
jiffies_to_msecs(timeout - jiffies));
|
|
mod_timer(&glue->timer, timeout);
|
|
}
|
|
|
|
static irqreturn_t dsps_interrupt(int irq, void *hci)
|
|
{
|
|
struct musb *musb = hci;
|
|
void __iomem *reg_base = musb->ctrl_base;
|
|
struct device *dev = musb->controller;
|
|
struct platform_device *pdev = to_platform_device(dev->parent);
|
|
struct dsps_glue *glue = platform_get_drvdata(pdev);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
unsigned long flags;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u32 epintr, usbintr;
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
|
|
/* Get endpoint interrupts */
|
|
epintr = dsps_readl(reg_base, wrp->epintr_status);
|
|
musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift;
|
|
musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift;
|
|
|
|
if (epintr)
|
|
dsps_writel(reg_base, wrp->epintr_status, epintr);
|
|
|
|
/* Get usb core interrupts */
|
|
usbintr = dsps_readl(reg_base, wrp->coreintr_status);
|
|
if (!usbintr && !epintr)
|
|
goto eoi;
|
|
|
|
musb->int_usb = (usbintr & wrp->usb_bitmap) >> wrp->usb_shift;
|
|
if (usbintr)
|
|
dsps_writel(reg_base, wrp->coreintr_status, usbintr);
|
|
|
|
dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
|
|
usbintr, epintr);
|
|
/*
|
|
* DRVVBUS IRQs are the only proxy we have (a very poor one!) for
|
|
* DSPS IP's missing ID change IRQ. We need an ID change IRQ to
|
|
* switch appropriately between halves of the OTG state machine.
|
|
* Managing DEVCTL.SESSION per Mentor docs requires that we know its
|
|
* value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
|
|
* Also, DRVVBUS pulses for SRP (but not at 5V) ...
|
|
*/
|
|
if ((usbintr & MUSB_INTR_BABBLE) && is_host_enabled(musb))
|
|
pr_info("CAUTION: musb: Babble Interrupt Occured\n");
|
|
|
|
if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
|
|
int drvvbus = dsps_readl(reg_base, wrp->status);
|
|
void __iomem *mregs = musb->mregs;
|
|
u8 devctl = dsps_readb(mregs, MUSB_DEVCTL);
|
|
int err;
|
|
|
|
err = is_host_enabled(musb) && (musb->int_usb &
|
|
MUSB_INTR_VBUSERROR);
|
|
if (err) {
|
|
/*
|
|
* The Mentor core doesn't debounce VBUS as needed
|
|
* to cope with device connect current spikes. This
|
|
* means it's not uncommon for bus-powered devices
|
|
* to get VBUS errors during enumeration.
|
|
*
|
|
* This is a workaround, but newer RTL from Mentor
|
|
* seems to allow a better one: "re"-starting sessions
|
|
* without waiting for VBUS to stop registering in
|
|
* devctl.
|
|
*/
|
|
musb->int_usb &= ~MUSB_INTR_VBUSERROR;
|
|
musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
|
|
mod_timer(&glue->timer,
|
|
jiffies + wrp->poll_seconds * HZ);
|
|
WARNING("VBUS error workaround (delay coming)\n");
|
|
} else if (is_host_enabled(musb) && drvvbus) {
|
|
musb->is_active = 1;
|
|
MUSB_HST_MODE(musb);
|
|
musb->xceiv->otg->default_a = 1;
|
|
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
|
|
del_timer(&glue->timer);
|
|
} else {
|
|
musb->is_active = 0;
|
|
MUSB_DEV_MODE(musb);
|
|
musb->xceiv->otg->default_a = 0;
|
|
musb->xceiv->state = OTG_STATE_B_IDLE;
|
|
}
|
|
|
|
/* NOTE: this must complete power-on within 100 ms. */
|
|
dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
|
|
drvvbus ? "on" : "off",
|
|
otg_state_string(musb->xceiv->state),
|
|
err ? " ERROR" : "",
|
|
devctl);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
if (musb->int_tx || musb->int_rx || musb->int_usb)
|
|
ret |= musb_interrupt(musb);
|
|
|
|
eoi:
|
|
/* EOI needs to be written for the IRQ to be re-asserted. */
|
|
if (ret == IRQ_HANDLED || epintr || usbintr)
|
|
dsps_writel(reg_base, wrp->eoi, 1);
|
|
|
|
/* Poll for ID change */
|
|
if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE)
|
|
mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
|
|
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dsps_musb_init(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct musb_hdrc_platform_data *plat = dev->platform_data;
|
|
struct platform_device *pdev = to_platform_device(dev->parent);
|
|
struct dsps_glue *glue = platform_get_drvdata(pdev);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
struct omap_musb_board_data *data = plat->board_data;
|
|
void __iomem *reg_base = musb->ctrl_base;
|
|
u32 rev, val;
|
|
int status;
|
|
|
|
/* mentor core register starts at offset of 0x400 from musb base */
|
|
musb->mregs += wrp->musb_core_offset;
|
|
|
|
/* NOP driver needs change if supporting dual instance */
|
|
usb_nop_xceiv_register();
|
|
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
|
|
if (IS_ERR_OR_NULL(musb->xceiv))
|
|
return -ENODEV;
|
|
|
|
/* Returns zero if e.g. not clocked */
|
|
rev = dsps_readl(reg_base, wrp->revision);
|
|
if (!rev) {
|
|
status = -ENODEV;
|
|
goto err0;
|
|
}
|
|
|
|
if (is_host_enabled(musb))
|
|
setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
|
|
|
|
/* Reset the musb */
|
|
dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
|
|
|
|
/* Start the on-chip PHY and its PLL. */
|
|
if (data->set_phy_power)
|
|
data->set_phy_power(1);
|
|
|
|
musb->isr = dsps_interrupt;
|
|
|
|
/* reset the otgdisable bit, needed for host mode to work */
|
|
val = dsps_readl(reg_base, wrp->phy_utmi);
|
|
val &= ~(1 << wrp->otg_disable);
|
|
dsps_writel(musb->ctrl_base, wrp->phy_utmi, val);
|
|
|
|
/* clear level interrupt */
|
|
dsps_writel(reg_base, wrp->eoi, 0);
|
|
|
|
return 0;
|
|
err0:
|
|
usb_put_phy(musb->xceiv);
|
|
usb_nop_xceiv_unregister();
|
|
return status;
|
|
}
|
|
|
|
static int dsps_musb_exit(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct musb_hdrc_platform_data *plat = dev->platform_data;
|
|
struct omap_musb_board_data *data = plat->board_data;
|
|
struct platform_device *pdev = to_platform_device(dev->parent);
|
|
struct dsps_glue *glue = platform_get_drvdata(pdev);
|
|
|
|
if (is_host_enabled(musb))
|
|
del_timer_sync(&glue->timer);
|
|
|
|
/* Shutdown the on-chip PHY and its PLL. */
|
|
if (data->set_phy_power)
|
|
data->set_phy_power(0);
|
|
|
|
/* NOP driver needs change if supporting dual instance */
|
|
usb_put_phy(musb->xceiv);
|
|
usb_nop_xceiv_unregister();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct musb_platform_ops dsps_ops = {
|
|
.init = dsps_musb_init,
|
|
.exit = dsps_musb_exit,
|
|
|
|
.enable = dsps_musb_enable,
|
|
.disable = dsps_musb_disable,
|
|
|
|
.try_idle = dsps_musb_try_idle,
|
|
};
|
|
|
|
static u64 musb_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
|
|
{
|
|
struct device *dev = glue->dev;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct musb_hdrc_platform_data *pdata = dev->platform_data;
|
|
struct platform_device *musb;
|
|
struct resource *res;
|
|
struct resource resources[2];
|
|
char res_name[10];
|
|
int ret;
|
|
|
|
/* get memory resource */
|
|
sprintf(res_name, "musb%d", id);
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
|
|
if (!res) {
|
|
dev_err(dev, "%s get mem resource failed\n", res_name);
|
|
ret = -ENODEV;
|
|
goto err0;
|
|
}
|
|
res->parent = NULL;
|
|
resources[0] = *res;
|
|
|
|
/* get irq resource */
|
|
sprintf(res_name, "musb%d-irq", id);
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
|
|
if (!res) {
|
|
dev_err(dev, "%s get irq resource failed\n", res_name);
|
|
ret = -ENODEV;
|
|
goto err0;
|
|
}
|
|
res->parent = NULL;
|
|
resources[1] = *res;
|
|
resources[1].name = "mc";
|
|
|
|
/* allocate the child platform device */
|
|
musb = platform_device_alloc("musb-hdrc", -1);
|
|
if (!musb) {
|
|
dev_err(dev, "failed to allocate musb device\n");
|
|
ret = -ENOMEM;
|
|
goto err0;
|
|
}
|
|
|
|
musb->dev.parent = dev;
|
|
musb->dev.dma_mask = &musb_dmamask;
|
|
musb->dev.coherent_dma_mask = musb_dmamask;
|
|
|
|
glue->musb = musb;
|
|
|
|
pdata->platform_ops = &dsps_ops;
|
|
|
|
ret = platform_device_add_resources(musb, resources, 2);
|
|
if (ret) {
|
|
dev_err(dev, "failed to add resources\n");
|
|
goto err1;
|
|
}
|
|
|
|
ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
|
|
if (ret) {
|
|
dev_err(dev, "failed to add platform_data\n");
|
|
goto err1;
|
|
}
|
|
|
|
ret = platform_device_add(musb);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register musb device\n");
|
|
goto err1;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err1:
|
|
platform_device_put(musb);
|
|
err0:
|
|
return ret;
|
|
}
|
|
|
|
static void __devexit dsps_delete_musb_pdev(struct dsps_glue *glue)
|
|
{
|
|
platform_device_del(glue->musb);
|
|
platform_device_put(glue->musb);
|
|
}
|
|
|
|
static int __devinit dsps_probe(struct platform_device *pdev)
|
|
{
|
|
const struct platform_device_id *id = platform_get_device_id(pdev);
|
|
const struct dsps_musb_wrapper *wrp =
|
|
(struct dsps_musb_wrapper *)id->driver_data;
|
|
struct dsps_glue *glue;
|
|
struct resource *iomem;
|
|
int ret;
|
|
|
|
/* allocate glue */
|
|
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
|
|
if (!glue) {
|
|
dev_err(&pdev->dev, "unable to allocate glue memory\n");
|
|
ret = -ENOMEM;
|
|
goto err0;
|
|
}
|
|
|
|
/* get memory resource */
|
|
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!iomem) {
|
|
dev_err(&pdev->dev, "failed to get usbss mem resourse\n");
|
|
ret = -ENODEV;
|
|
goto err1;
|
|
}
|
|
|
|
glue->dev = &pdev->dev;
|
|
|
|
glue->wrp = kmemdup(wrp, sizeof(*wrp), GFP_KERNEL);
|
|
if (!glue->wrp) {
|
|
dev_err(&pdev->dev, "failed to duplicate wrapper struct memory\n");
|
|
ret = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
platform_set_drvdata(pdev, glue);
|
|
|
|
/* enable the usbss clocks */
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
ret = pm_runtime_get_sync(&pdev->dev);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "pm_runtime_get_sync FAILED");
|
|
goto err2;
|
|
}
|
|
|
|
/* create the child platform device for first instances of musb */
|
|
ret = dsps_create_musb_pdev(glue, 0);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "failed to create child pdev\n");
|
|
goto err3;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err3:
|
|
pm_runtime_put(&pdev->dev);
|
|
err2:
|
|
pm_runtime_disable(&pdev->dev);
|
|
kfree(glue->wrp);
|
|
err1:
|
|
kfree(glue);
|
|
err0:
|
|
return ret;
|
|
}
|
|
static int __devexit dsps_remove(struct platform_device *pdev)
|
|
{
|
|
struct dsps_glue *glue = platform_get_drvdata(pdev);
|
|
|
|
/* delete the child platform device */
|
|
dsps_delete_musb_pdev(glue);
|
|
|
|
/* disable usbss clocks */
|
|
pm_runtime_put(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
kfree(glue->wrp);
|
|
kfree(glue);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int dsps_suspend(struct device *dev)
|
|
{
|
|
struct musb_hdrc_platform_data *plat = dev->platform_data;
|
|
struct omap_musb_board_data *data = plat->board_data;
|
|
|
|
/* Shutdown the on-chip PHY and its PLL. */
|
|
if (data->set_phy_power)
|
|
data->set_phy_power(0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsps_resume(struct device *dev)
|
|
{
|
|
struct musb_hdrc_platform_data *plat = dev->platform_data;
|
|
struct omap_musb_board_data *data = plat->board_data;
|
|
|
|
/* Start the on-chip PHY and its PLL. */
|
|
if (data->set_phy_power)
|
|
data->set_phy_power(1);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
|
|
|
|
static const struct dsps_musb_wrapper ti81xx_driver_data __devinitconst = {
|
|
.revision = 0x00,
|
|
.control = 0x14,
|
|
.status = 0x18,
|
|
.eoi = 0x24,
|
|
.epintr_set = 0x38,
|
|
.epintr_clear = 0x40,
|
|
.epintr_status = 0x30,
|
|
.coreintr_set = 0x3c,
|
|
.coreintr_clear = 0x44,
|
|
.coreintr_status = 0x34,
|
|
.phy_utmi = 0xe0,
|
|
.mode = 0xe8,
|
|
.reset = 0,
|
|
.otg_disable = 21,
|
|
.iddig = 8,
|
|
.usb_shift = 0,
|
|
.usb_mask = 0x1ff,
|
|
.usb_bitmap = (0x1ff << 0),
|
|
.drvvbus = 8,
|
|
.txep_shift = 0,
|
|
.txep_mask = 0xffff,
|
|
.txep_bitmap = (0xffff << 0),
|
|
.rxep_shift = 16,
|
|
.rxep_mask = 0xfffe,
|
|
.rxep_bitmap = (0xfffe << 16),
|
|
.musb_core_offset = 0x400,
|
|
.poll_seconds = 2,
|
|
};
|
|
|
|
static const struct platform_device_id musb_dsps_id_table[] __devinitconst = {
|
|
{
|
|
.name = "musb-ti81xx",
|
|
.driver_data = (kernel_ulong_t) &ti81xx_driver_data,
|
|
},
|
|
{ }, /* Terminating Entry */
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, musb_dsps_id_table);
|
|
|
|
static const struct of_device_id musb_dsps_of_match[] __devinitconst = {
|
|
{ .compatible = "musb-ti81xx", },
|
|
{ .compatible = "ti,ti81xx-musb", },
|
|
{ .compatible = "ti,am335x-musb", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
|
|
|
|
static struct platform_driver dsps_usbss_driver = {
|
|
.probe = dsps_probe,
|
|
.remove = __devexit_p(dsps_remove),
|
|
.driver = {
|
|
.name = "musb-dsps",
|
|
.pm = &dsps_pm_ops,
|
|
.of_match_table = musb_dsps_of_match,
|
|
},
|
|
.id_table = musb_dsps_id_table,
|
|
};
|
|
|
|
MODULE_DESCRIPTION("TI DSPS MUSB Glue Layer");
|
|
MODULE_AUTHOR("Ravi B <ravibabu@ti.com>");
|
|
MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
static int __init dsps_init(void)
|
|
{
|
|
return platform_driver_register(&dsps_usbss_driver);
|
|
}
|
|
subsys_initcall(dsps_init);
|
|
|
|
static void __exit dsps_exit(void)
|
|
{
|
|
platform_driver_unregister(&dsps_usbss_driver);
|
|
}
|
|
module_exit(dsps_exit);
|