mirror of https://gitee.com/openkylin/linux.git
203 lines
6.1 KiB
C
203 lines
6.1 KiB
C
/*
|
|
* Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher
|
|
* Mark Cave-Ayland, Carlo E Prelz, Dick Streefland
|
|
* Copyright (c) 2002, 2003 Tuukka Toivonen
|
|
* Copyright (c) 2008 Erik Andrén
|
|
* Copyright (c) 2008 Chia-I Wu
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* P/N 861037: Sensor HDCS1000 ASIC STV0600
|
|
* P/N 861050-0010: Sensor HDCS1000 ASIC STV0600
|
|
* P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express
|
|
* P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam
|
|
* P/N 861075-0040: Sensor HDCS1000 ASIC
|
|
* P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB
|
|
* P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web
|
|
*/
|
|
|
|
#ifndef STV06XX_HDCS_H_
|
|
#define STV06XX_HDCS_H_
|
|
|
|
#include "stv06xx_sensor.h"
|
|
|
|
#define HDCS_REG_CONFIG(sd) (IS_1020(sd) ? HDCS20_CONFIG : HDCS00_CONFIG)
|
|
#define HDCS_REG_CONTROL(sd) (IS_1020(sd) ? HDCS20_CONTROL : HDCS00_CONTROL)
|
|
|
|
#define HDCS_1X00_DEF_WIDTH 360
|
|
#define HDCS_1X00_DEF_HEIGHT 296
|
|
|
|
#define HDCS_1020_DEF_WIDTH 352
|
|
#define HDCS_1020_DEF_HEIGHT 292
|
|
|
|
#define HDCS_1020_BOTTOM_Y_SKIP 4
|
|
|
|
#define HDCS_CLK_FREQ_MHZ 25
|
|
|
|
#define HDCS_ADC_START_SIG_DUR 3
|
|
|
|
/* LSB bit of I2C or register address signifies write (0) or read (1) */
|
|
/* I2C Registers common for both HDCS-1000/1100 and HDCS-1020 */
|
|
/* Identifications Register */
|
|
#define HDCS_IDENT (0x00 << 1)
|
|
/* Status Register */
|
|
#define HDCS_STATUS (0x01 << 1)
|
|
/* Interrupt Mask Register */
|
|
#define HDCS_IMASK (0x02 << 1)
|
|
/* Pad Control Register */
|
|
#define HDCS_PCTRL (0x03 << 1)
|
|
/* Pad Drive Control Register */
|
|
#define HDCS_PDRV (0x04 << 1)
|
|
/* Interface Control Register */
|
|
#define HDCS_ICTRL (0x05 << 1)
|
|
/* Interface Timing Register */
|
|
#define HDCS_ITMG (0x06 << 1)
|
|
/* Baud Fraction Register */
|
|
#define HDCS_BFRAC (0x07 << 1)
|
|
/* Baud Rate Register */
|
|
#define HDCS_BRATE (0x08 << 1)
|
|
/* ADC Control Register */
|
|
#define HDCS_ADCCTRL (0x09 << 1)
|
|
/* First Window Row Register */
|
|
#define HDCS_FWROW (0x0a << 1)
|
|
/* First Window Column Register */
|
|
#define HDCS_FWCOL (0x0b << 1)
|
|
/* Last Window Row Register */
|
|
#define HDCS_LWROW (0x0c << 1)
|
|
/* Last Window Column Register */
|
|
#define HDCS_LWCOL (0x0d << 1)
|
|
/* Timing Control Register */
|
|
#define HDCS_TCTRL (0x0e << 1)
|
|
/* PGA Gain Register: Even Row, Even Column */
|
|
#define HDCS_ERECPGA (0x0f << 1)
|
|
/* PGA Gain Register: Even Row, Odd Column */
|
|
#define HDCS_EROCPGA (0x10 << 1)
|
|
/* PGA Gain Register: Odd Row, Even Column */
|
|
#define HDCS_ORECPGA (0x11 << 1)
|
|
/* PGA Gain Register: Odd Row, Odd Column */
|
|
#define HDCS_OROCPGA (0x12 << 1)
|
|
/* Row Exposure Low Register */
|
|
#define HDCS_ROWEXPL (0x13 << 1)
|
|
/* Row Exposure High Register */
|
|
#define HDCS_ROWEXPH (0x14 << 1)
|
|
|
|
/* I2C Registers only for HDCS-1000/1100 */
|
|
/* Sub-Row Exposure Low Register */
|
|
#define HDCS00_SROWEXPL (0x15 << 1)
|
|
/* Sub-Row Exposure High Register */
|
|
#define HDCS00_SROWEXPH (0x16 << 1)
|
|
/* Configuration Register */
|
|
#define HDCS00_CONFIG (0x17 << 1)
|
|
/* Control Register */
|
|
#define HDCS00_CONTROL (0x18 << 1)
|
|
|
|
/* I2C Registers only for HDCS-1020 */
|
|
/* Sub-Row Exposure Register */
|
|
#define HDCS20_SROWEXP (0x15 << 1)
|
|
/* Error Control Register */
|
|
#define HDCS20_ERROR (0x16 << 1)
|
|
/* Interface Timing 2 Register */
|
|
#define HDCS20_ITMG2 (0x17 << 1)
|
|
/* Interface Control 2 Register */
|
|
#define HDCS20_ICTRL2 (0x18 << 1)
|
|
/* Horizontal Blank Register */
|
|
#define HDCS20_HBLANK (0x19 << 1)
|
|
/* Vertical Blank Register */
|
|
#define HDCS20_VBLANK (0x1a << 1)
|
|
/* Configuration Register */
|
|
#define HDCS20_CONFIG (0x1b << 1)
|
|
/* Control Register */
|
|
#define HDCS20_CONTROL (0x1c << 1)
|
|
|
|
#define HDCS_RUN_ENABLE (1 << 2)
|
|
#define HDCS_SLEEP_MODE (1 << 1)
|
|
|
|
#define HDCS_DEFAULT_EXPOSURE 48
|
|
#define HDCS_DEFAULT_GAIN 50
|
|
|
|
static int hdcs_probe_1x00(struct sd *sd);
|
|
static int hdcs_probe_1020(struct sd *sd);
|
|
static int hdcs_start(struct sd *sd);
|
|
static int hdcs_init(struct sd *sd);
|
|
static int hdcs_init_controls(struct sd *sd);
|
|
static int hdcs_stop(struct sd *sd);
|
|
static int hdcs_dump(struct sd *sd);
|
|
|
|
static int hdcs_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
|
|
static int hdcs_set_gain(struct gspca_dev *gspca_dev, __s32 val);
|
|
|
|
const struct stv06xx_sensor stv06xx_sensor_hdcs1x00 = {
|
|
.name = "HP HDCS-1000/1100",
|
|
.i2c_flush = 0,
|
|
.i2c_addr = (0x55 << 1),
|
|
.i2c_len = 1,
|
|
|
|
/* FIXME (see if we can lower min_packet_size, needs testing, and also
|
|
adjusting framerate when the bandwidth gets lower) */
|
|
.min_packet_size = { 847 },
|
|
.max_packet_size = { 847 },
|
|
|
|
.init = hdcs_init,
|
|
.init_controls = hdcs_init_controls,
|
|
.probe = hdcs_probe_1x00,
|
|
.start = hdcs_start,
|
|
.stop = hdcs_stop,
|
|
.dump = hdcs_dump,
|
|
};
|
|
|
|
const struct stv06xx_sensor stv06xx_sensor_hdcs1020 = {
|
|
.name = "HDCS-1020",
|
|
.i2c_flush = 0,
|
|
.i2c_addr = (0x55 << 1),
|
|
.i2c_len = 1,
|
|
|
|
/* FIXME (see if we can lower min_packet_size, needs testing, and also
|
|
adjusting framerate when the bandwidthm gets lower) */
|
|
.min_packet_size = { 847 },
|
|
.max_packet_size = { 847 },
|
|
|
|
.init = hdcs_init,
|
|
.init_controls = hdcs_init_controls,
|
|
.probe = hdcs_probe_1020,
|
|
.start = hdcs_start,
|
|
.stop = hdcs_stop,
|
|
.dump = hdcs_dump,
|
|
};
|
|
|
|
static const u16 stv_bridge_init[][2] = {
|
|
{STV_ISO_ENABLE, 0},
|
|
{STV_REG23, 0},
|
|
{STV_REG00, 0x1d},
|
|
{STV_REG01, 0xb5},
|
|
{STV_REG02, 0xa8},
|
|
{STV_REG03, 0x95},
|
|
{STV_REG04, 0x07},
|
|
|
|
{STV_SCAN_RATE, 0x20},
|
|
{STV_Y_CTRL, 0x01},
|
|
{STV_X_CTRL, 0x0a}
|
|
};
|
|
|
|
static const u8 stv_sensor_init[][2] = {
|
|
/* Clear status (writing 1 will clear the corresponding status bit) */
|
|
{HDCS_STATUS, BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1)},
|
|
/* Disable all interrupts */
|
|
{HDCS_IMASK, 0x00},
|
|
{HDCS_PCTRL, BIT(6) | BIT(5) | BIT(1) | BIT(0)},
|
|
{HDCS_PDRV, 0x00},
|
|
{HDCS_ICTRL, BIT(5)},
|
|
{HDCS_ITMG, BIT(4) | BIT(1)},
|
|
/* ADC output resolution to 10 bits */
|
|
{HDCS_ADCCTRL, 10}
|
|
};
|
|
|
|
#endif
|