mirror of https://gitee.com/openkylin/linux.git
321 lines
7.4 KiB
C
321 lines
7.4 KiB
C
/***************************************************************************/
|
|
|
|
/*
|
|
* linux/arch/m68knommu/platform/528x/config.c
|
|
*
|
|
* Sub-architcture dependant initialization code for the Freescale
|
|
* 5280, 5281 and 5282 CPUs.
|
|
*
|
|
* Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
|
|
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
|
|
*/
|
|
|
|
/***************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/gpio.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfuart.h>
|
|
#include <asm/mcfqspi.h>
|
|
|
|
/***************************************************************************/
|
|
|
|
static struct mcf_platform_uart m528x_uart_platform[] = {
|
|
{
|
|
.mapbase = MCF_MBAR + MCFUART_BASE1,
|
|
.irq = MCFINT_VECBASE + MCFINT_UART0,
|
|
},
|
|
{
|
|
.mapbase = MCF_MBAR + MCFUART_BASE2,
|
|
.irq = MCFINT_VECBASE + MCFINT_UART0 + 1,
|
|
},
|
|
{
|
|
.mapbase = MCF_MBAR + MCFUART_BASE3,
|
|
.irq = MCFINT_VECBASE + MCFINT_UART0 + 2,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct platform_device m528x_uart = {
|
|
.name = "mcfuart",
|
|
.id = 0,
|
|
.dev.platform_data = m528x_uart_platform,
|
|
};
|
|
|
|
static struct resource m528x_fec_resources[] = {
|
|
{
|
|
.start = MCF_MBAR + 0x1000,
|
|
.end = MCF_MBAR + 0x1000 + 0x7ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = 64 + 23,
|
|
.end = 64 + 23,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = 64 + 27,
|
|
.end = 64 + 27,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = 64 + 29,
|
|
.end = 64 + 29,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device m528x_fec = {
|
|
.name = "fec",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(m528x_fec_resources),
|
|
.resource = m528x_fec_resources,
|
|
};
|
|
|
|
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
|
|
static struct resource m528x_qspi_resources[] = {
|
|
{
|
|
.start = MCFQSPI_IOBASE,
|
|
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = MCFINT_VECBASE + MCFINT_QSPI,
|
|
.end = MCFINT_VECBASE + MCFINT_QSPI,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
#define MCFQSPI_CS0 147
|
|
#define MCFQSPI_CS1 148
|
|
#define MCFQSPI_CS2 149
|
|
#define MCFQSPI_CS3 150
|
|
|
|
static int m528x_cs_setup(struct mcfqspi_cs_control *cs_control)
|
|
{
|
|
int status;
|
|
|
|
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
|
|
if (status) {
|
|
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
|
|
goto fail0;
|
|
}
|
|
status = gpio_direction_output(MCFQSPI_CS0, 1);
|
|
if (status) {
|
|
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
|
|
goto fail1;
|
|
}
|
|
|
|
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
|
|
if (status) {
|
|
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
|
|
goto fail1;
|
|
}
|
|
status = gpio_direction_output(MCFQSPI_CS1, 1);
|
|
if (status) {
|
|
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
|
|
goto fail2;
|
|
}
|
|
|
|
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
|
|
if (status) {
|
|
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
|
|
goto fail2;
|
|
}
|
|
status = gpio_direction_output(MCFQSPI_CS2, 1);
|
|
if (status) {
|
|
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
|
|
goto fail3;
|
|
}
|
|
|
|
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
|
|
if (status) {
|
|
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
|
|
goto fail3;
|
|
}
|
|
status = gpio_direction_output(MCFQSPI_CS3, 1);
|
|
if (status) {
|
|
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
|
|
goto fail4;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail4:
|
|
gpio_free(MCFQSPI_CS3);
|
|
fail3:
|
|
gpio_free(MCFQSPI_CS2);
|
|
fail2:
|
|
gpio_free(MCFQSPI_CS1);
|
|
fail1:
|
|
gpio_free(MCFQSPI_CS0);
|
|
fail0:
|
|
return status;
|
|
}
|
|
|
|
static void m528x_cs_teardown(struct mcfqspi_cs_control *cs_control)
|
|
{
|
|
gpio_free(MCFQSPI_CS3);
|
|
gpio_free(MCFQSPI_CS2);
|
|
gpio_free(MCFQSPI_CS1);
|
|
gpio_free(MCFQSPI_CS0);
|
|
}
|
|
|
|
static void m528x_cs_select(struct mcfqspi_cs_control *cs_control,
|
|
u8 chip_select, bool cs_high)
|
|
{
|
|
gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
|
|
}
|
|
|
|
static void m528x_cs_deselect(struct mcfqspi_cs_control *cs_control,
|
|
u8 chip_select, bool cs_high)
|
|
{
|
|
gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
|
|
}
|
|
|
|
static struct mcfqspi_cs_control m528x_cs_control = {
|
|
.setup = m528x_cs_setup,
|
|
.teardown = m528x_cs_teardown,
|
|
.select = m528x_cs_select,
|
|
.deselect = m528x_cs_deselect,
|
|
};
|
|
|
|
static struct mcfqspi_platform_data m528x_qspi_data = {
|
|
.bus_num = 0,
|
|
.num_chipselect = 4,
|
|
.cs_control = &m528x_cs_control,
|
|
};
|
|
|
|
static struct platform_device m528x_qspi = {
|
|
.name = "mcfqspi",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(m528x_qspi_resources),
|
|
.resource = m528x_qspi_resources,
|
|
.dev.platform_data = &m528x_qspi_data,
|
|
};
|
|
|
|
static void __init m528x_qspi_init(void)
|
|
{
|
|
/* setup Port QS for QSPI with gpio CS control */
|
|
__raw_writeb(0x07, MCFGPIO_PQSPAR);
|
|
}
|
|
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
|
|
|
|
static struct platform_device *m528x_devices[] __initdata = {
|
|
&m528x_uart,
|
|
&m528x_fec,
|
|
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
|
|
&m528x_qspi,
|
|
#endif
|
|
};
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m528x_uart_init_line(int line, int irq)
|
|
{
|
|
u8 port;
|
|
|
|
if ((line < 0) || (line > 2))
|
|
return;
|
|
|
|
/* make sure PUAPAR is set for UART0 and UART1 */
|
|
if (line < 2) {
|
|
port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR);
|
|
port |= (0x03 << (line * 2));
|
|
writeb(port, MCF_MBAR + MCF5282_GPIO_PUAPAR);
|
|
}
|
|
}
|
|
|
|
static void __init m528x_uarts_init(void)
|
|
{
|
|
const int nrlines = ARRAY_SIZE(m528x_uart_platform);
|
|
int line;
|
|
|
|
for (line = 0; (line < nrlines); line++)
|
|
m528x_uart_init_line(line, m528x_uart_platform[line].irq);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m528x_fec_init(void)
|
|
{
|
|
u16 v16;
|
|
|
|
/* Set multi-function pins to ethernet mode for fec0 */
|
|
v16 = readw(MCF_IPSBAR + 0x100056);
|
|
writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
|
|
writeb(0xc0, MCF_IPSBAR + 0x100058);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void m528x_cpu_reset(void)
|
|
{
|
|
local_irq_disable();
|
|
__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
#ifdef CONFIG_WILDFIRE
|
|
void wildfire_halt(void)
|
|
{
|
|
writeb(0, 0x30000007);
|
|
writeb(0x2, 0x30000007);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_WILDFIREMOD
|
|
void wildfiremod_halt(void)
|
|
{
|
|
printk(KERN_INFO "WildFireMod hibernating...\n");
|
|
|
|
/* Set portE.5 to Digital IO */
|
|
MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
|
|
|
|
/* Make portE.5 an output */
|
|
MCF5282_GPIO_DDRE |= (1 << 5);
|
|
|
|
/* Now toggle portE.5 from low to high */
|
|
MCF5282_GPIO_PORTE &= ~(1 << 5);
|
|
MCF5282_GPIO_PORTE |= (1 << 5);
|
|
|
|
printk(KERN_EMERG "Failed to hibernate. Halting!\n");
|
|
}
|
|
#endif
|
|
|
|
void __init config_BSP(char *commandp, int size)
|
|
{
|
|
#ifdef CONFIG_WILDFIRE
|
|
mach_halt = wildfire_halt;
|
|
#endif
|
|
#ifdef CONFIG_WILDFIREMOD
|
|
mach_halt = wildfiremod_halt;
|
|
#endif
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static int __init init_BSP(void)
|
|
{
|
|
mach_reset = m528x_cpu_reset;
|
|
m528x_uarts_init();
|
|
m528x_fec_init();
|
|
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
|
|
m528x_qspi_init();
|
|
#endif
|
|
platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(init_BSP);
|
|
|
|
/***************************************************************************/
|