mirror of https://gitee.com/openkylin/linux.git
264 lines
7.5 KiB
Plaintext
264 lines
7.5 KiB
Plaintext
* Qualcomm PCI express root complex
|
|
|
|
- compatible:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: Value should contain
|
|
- "qcom,pcie-ipq8064" for ipq8064
|
|
- "qcom,pcie-apq8064" for apq8064
|
|
- "qcom,pcie-apq8084" for apq8084
|
|
- "qcom,pcie-msm8996" for msm8996 or apq8096
|
|
- "qcom,pcie-ipq4019" for ipq4019
|
|
|
|
- reg:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: Register ranges as listed in the reg-names property
|
|
|
|
- reg-names:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: Must include the following entries
|
|
- "parf" Qualcomm specific registers
|
|
- "dbi" Designware PCIe registers
|
|
- "elbi" External local bus interface registers
|
|
- "config" PCIe configuration space
|
|
|
|
- device_type:
|
|
Usage: required
|
|
Value type: <string>
|
|
Definition: Should be "pci". As specified in designware-pcie.txt
|
|
|
|
- #address-cells:
|
|
Usage: required
|
|
Value type: <u32>
|
|
Definition: Should be 3. As specified in designware-pcie.txt
|
|
|
|
- #size-cells:
|
|
Usage: required
|
|
Value type: <u32>
|
|
Definition: Should be 2. As specified in designware-pcie.txt
|
|
|
|
- ranges:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: As specified in designware-pcie.txt
|
|
|
|
- interrupts:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: MSI interrupt
|
|
|
|
- interrupt-names:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: Should contain "msi"
|
|
|
|
- #interrupt-cells:
|
|
Usage: required
|
|
Value type: <u32>
|
|
Definition: Should be 1. As specified in designware-pcie.txt
|
|
|
|
- interrupt-map-mask:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: As specified in designware-pcie.txt
|
|
|
|
- interrupt-map:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: As specified in designware-pcie.txt
|
|
|
|
- clocks:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: List of phandle and clock specifier pairs as listed
|
|
in clock-names property
|
|
|
|
- clock-names:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: Should contain the following entries
|
|
- "iface" Configuration AHB clock
|
|
|
|
- clock-names:
|
|
Usage: required for ipq/apq8064
|
|
Value type: <stringlist>
|
|
Definition: Should contain the following entries
|
|
- "core" Clocks the pcie hw block
|
|
- "phy" Clocks the pcie PHY block
|
|
- clock-names:
|
|
Usage: required for apq8084/ipq4019
|
|
Value type: <stringlist>
|
|
Definition: Should contain the following entries
|
|
- "aux" Auxiliary (AUX) clock
|
|
- "bus_master" Master AXI clock
|
|
- "bus_slave" Slave AXI clock
|
|
|
|
- clock-names:
|
|
Usage: required for msm8996/apq8096
|
|
Value type: <stringlist>
|
|
Definition: Should contain the following entries
|
|
- "pipe" Pipe Clock driving internal logic
|
|
- "aux" Auxiliary (AUX) clock
|
|
- "cfg" Configuration clock
|
|
- "bus_master" Master AXI clock
|
|
- "bus_slave" Slave AXI clock
|
|
|
|
- resets:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: List of phandle and reset specifier pairs as listed
|
|
in reset-names property
|
|
|
|
- reset-names:
|
|
Usage: required for ipq/apq8064
|
|
Value type: <stringlist>
|
|
Definition: Should contain the following entries
|
|
- "axi" AXI reset
|
|
- "ahb" AHB reset
|
|
- "por" POR reset
|
|
- "pci" PCI reset
|
|
- "phy" PHY reset
|
|
|
|
- reset-names:
|
|
Usage: required for apq8084
|
|
Value type: <stringlist>
|
|
Definition: Should contain the following entries
|
|
- "core" Core reset
|
|
|
|
- reset-names:
|
|
Usage: required for ipq/apq8064
|
|
Value type: <stringlist>
|
|
Definition: Should contain the following entries
|
|
- "axi_m" AXI master reset
|
|
- "axi_s" AXI slave reset
|
|
- "pipe" PIPE reset
|
|
- "axi_m_vmid" VMID reset
|
|
- "axi_s_xpu" XPU reset
|
|
- "parf" PARF reset
|
|
- "phy" PHY reset
|
|
- "axi_m_sticky" AXI sticky reset
|
|
- "pipe_sticky" PIPE sticky reset
|
|
- "pwr" PWR reset
|
|
- "ahb" AHB reset
|
|
- "phy_ahb" PHY AHB reset
|
|
|
|
- power-domains:
|
|
Usage: required for apq8084 and msm8996/apq8096
|
|
Value type: <prop-encoded-array>
|
|
Definition: A phandle and power domain specifier pair to the
|
|
power domain which is responsible for collapsing
|
|
and restoring power to the peripheral
|
|
|
|
- vdda-supply:
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: A phandle to the core analog power supply
|
|
|
|
- vdda_phy-supply:
|
|
Usage: required for ipq/apq8064
|
|
Value type: <phandle>
|
|
Definition: A phandle to the analog power supply for PHY
|
|
|
|
- vdda_refclk-supply:
|
|
Usage: required for ipq/apq8064
|
|
Value type: <phandle>
|
|
Definition: A phandle to the analog power supply for IC which generates
|
|
reference clock
|
|
|
|
- phys:
|
|
Usage: required for apq8084
|
|
Value type: <phandle>
|
|
Definition: List of phandle(s) as listed in phy-names property
|
|
|
|
- phy-names:
|
|
Usage: required for apq8084
|
|
Value type: <stringlist>
|
|
Definition: Should contain "pciephy"
|
|
|
|
- <name>-gpios:
|
|
Usage: optional
|
|
Value type: <prop-encoded-array>
|
|
Definition: List of phandle and gpio specifier pairs. Should contain
|
|
- "perst-gpios" PCIe endpoint reset signal line
|
|
- "wake-gpios" PCIe endpoint wake signal line
|
|
|
|
* Example for ipq/apq8064
|
|
pcie@1b500000 {
|
|
compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie";
|
|
reg = <0x1b500000 0x1000
|
|
0x1b502000 0x80
|
|
0x1b600000 0x100
|
|
0x0ff00000 0x100000>;
|
|
reg-names = "dbi", "elbi", "parf", "config";
|
|
device_type = "pci";
|
|
linux,pci-domain = <0>;
|
|
bus-range = <0x00 0xff>;
|
|
num-lanes = <1>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
|
|
0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
|
|
interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
|
|
interrupt-names = "msi";
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0x7>;
|
|
interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
clocks = <&gcc PCIE_A_CLK>,
|
|
<&gcc PCIE_H_CLK>,
|
|
<&gcc PCIE_PHY_CLK>;
|
|
clock-names = "core", "iface", "phy";
|
|
resets = <&gcc PCIE_ACLK_RESET>,
|
|
<&gcc PCIE_HCLK_RESET>,
|
|
<&gcc PCIE_POR_RESET>,
|
|
<&gcc PCIE_PCI_RESET>,
|
|
<&gcc PCIE_PHY_RESET>;
|
|
reset-names = "axi", "ahb", "por", "pci", "phy";
|
|
pinctrl-0 = <&pcie_pins_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
* Example for apq8084
|
|
pcie0@fc520000 {
|
|
compatible = "qcom,pcie-apq8084", "snps,dw-pcie";
|
|
reg = <0xfc520000 0x2000>,
|
|
<0xff000000 0x1000>,
|
|
<0xff001000 0x1000>,
|
|
<0xff002000 0x2000>;
|
|
reg-names = "parf", "dbi", "elbi", "config";
|
|
device_type = "pci";
|
|
linux,pci-domain = <0>;
|
|
bus-range = <0x00 0xff>;
|
|
num-lanes = <1>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */
|
|
0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
|
|
interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
|
|
interrupt-names = "msi";
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0x7>;
|
|
interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
|
|
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
|
|
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
|
|
<&gcc GCC_PCIE_0_AUX_CLK>;
|
|
clock-names = "iface", "master_bus", "slave_bus", "aux";
|
|
resets = <&gcc GCC_PCIE_0_BCR>;
|
|
reset-names = "core";
|
|
power-domains = <&gcc PCIE0_GDSC>;
|
|
vdda-supply = <&pma8084_l3>;
|
|
phys = <&pciephy0>;
|
|
phy-names = "pciephy";
|
|
perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&pcie0_pins_default>;
|
|
pinctrl-names = "default";
|
|
};
|