linux/drivers/tty/serial/mxs-auart.c

1794 lines
45 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Application UART driver for:
* Freescale STMP37XX/STMP378X
* Alphascale ASM9260
*
* Author: dmitry pervushin <dimka@embeddedalley.com>
*
* Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
* Provide Alphascale ASM9260 support.
* Copyright 2008-2010 Freescale Semiconductor, Inc.
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*/
#if defined(CONFIG_SERIAL_MXS_AUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of_device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <asm/cacheflush.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/err.h>
#include <linux/irq.h>
#include "serial_mctrl_gpio.h"
#define MXS_AUART_PORTS 5
#define MXS_AUART_FIFO_SIZE 16
#define SET_REG 0x4
#define CLR_REG 0x8
#define TOG_REG 0xc
#define AUART_CTRL0 0x00000000
#define AUART_CTRL1 0x00000010
#define AUART_CTRL2 0x00000020
#define AUART_LINECTRL 0x00000030
#define AUART_LINECTRL2 0x00000040
#define AUART_INTR 0x00000050
#define AUART_DATA 0x00000060
#define AUART_STAT 0x00000070
#define AUART_DEBUG 0x00000080
#define AUART_VERSION 0x00000090
#define AUART_AUTOBAUD 0x000000a0
#define AUART_CTRL0_SFTRST (1 << 31)
#define AUART_CTRL0_CLKGATE (1 << 30)
#define AUART_CTRL0_RXTO_ENABLE (1 << 27)
#define AUART_CTRL0_RXTIMEOUT(v) (((v) & 0x7ff) << 16)
#define AUART_CTRL0_XFER_COUNT(v) ((v) & 0xffff)
#define AUART_CTRL1_XFER_COUNT(v) ((v) & 0xffff)
#define AUART_CTRL2_DMAONERR (1 << 26)
#define AUART_CTRL2_TXDMAE (1 << 25)
#define AUART_CTRL2_RXDMAE (1 << 24)
#define AUART_CTRL2_CTSEN (1 << 15)
#define AUART_CTRL2_RTSEN (1 << 14)
#define AUART_CTRL2_RTS (1 << 11)
#define AUART_CTRL2_RXE (1 << 9)
#define AUART_CTRL2_TXE (1 << 8)
#define AUART_CTRL2_UARTEN (1 << 0)
#define AUART_LINECTRL_BAUD_DIV_MAX 0x003fffc0
#define AUART_LINECTRL_BAUD_DIV_MIN 0x000000ec
#define AUART_LINECTRL_BAUD_DIVINT_SHIFT 16
#define AUART_LINECTRL_BAUD_DIVINT_MASK 0xffff0000
#define AUART_LINECTRL_BAUD_DIVINT(v) (((v) & 0xffff) << 16)
#define AUART_LINECTRL_BAUD_DIVFRAC_SHIFT 8
#define AUART_LINECTRL_BAUD_DIVFRAC_MASK 0x00003f00
#define AUART_LINECTRL_BAUD_DIVFRAC(v) (((v) & 0x3f) << 8)
#define AUART_LINECTRL_WLEN_MASK 0x00000060
#define AUART_LINECTRL_WLEN(v) (((v) & 0x3) << 5)
#define AUART_LINECTRL_FEN (1 << 4)
#define AUART_LINECTRL_STP2 (1 << 3)
#define AUART_LINECTRL_EPS (1 << 2)
#define AUART_LINECTRL_PEN (1 << 1)
#define AUART_LINECTRL_BRK (1 << 0)
#define AUART_INTR_RTIEN (1 << 22)
#define AUART_INTR_TXIEN (1 << 21)
#define AUART_INTR_RXIEN (1 << 20)
#define AUART_INTR_CTSMIEN (1 << 17)
#define AUART_INTR_RTIS (1 << 6)
#define AUART_INTR_TXIS (1 << 5)
#define AUART_INTR_RXIS (1 << 4)
#define AUART_INTR_CTSMIS (1 << 1)
#define AUART_STAT_BUSY (1 << 29)
#define AUART_STAT_CTS (1 << 28)
#define AUART_STAT_TXFE (1 << 27)
#define AUART_STAT_TXFF (1 << 25)
#define AUART_STAT_RXFE (1 << 24)
#define AUART_STAT_OERR (1 << 19)
#define AUART_STAT_BERR (1 << 18)
#define AUART_STAT_PERR (1 << 17)
#define AUART_STAT_FERR (1 << 16)
#define AUART_STAT_RXCOUNT_MASK 0xffff
/*
* Start of Alphascale asm9260 defines
* This list contains only differences of existing bits
* between imx2x and asm9260
*/
#define ASM9260_HW_CTRL0 0x0000
/*
* RW. Tell the UART to execute the RX DMA Command. The
* UART will clear this bit at the end of receive execution.
*/
#define ASM9260_BM_CTRL0_RXDMA_RUN BIT(28)
/* RW. 0 use FIFO for status register; 1 use DMA */
#define ASM9260_BM_CTRL0_RXTO_SOURCE_STATUS BIT(25)
/*
* RW. RX TIMEOUT Enable. Valid for FIFO and DMA.
* Warning: If this bit is set to 0, the RX timeout will not affect receive DMA
* operation. If this bit is set to 1, a receive timeout will cause the receive
* DMA logic to terminate by filling the remaining DMA bytes with garbage data.
*/
#define ASM9260_BM_CTRL0_RXTO_ENABLE BIT(24)
/*
* RW. Receive Timeout Counter Value: number of 8-bit-time to wait before
* asserting timeout on the RX input. If the RXFIFO is not empty and the RX
* input is idle, then the watchdog counter will decrement each bit-time. Note
* 7-bit-time is added to the programmed value, so a value of zero will set
* the counter to 7-bit-time, a value of 0x1 gives 15-bit-time and so on. Also
* note that the counter is reloaded at the end of each frame, so if the frame
* is 10 bits long and the timeout counter value is zero, then timeout will
* occur (when FIFO is not empty) even if the RX input is not idle. The default
* value is 0x3 (31 bit-time).
*/
#define ASM9260_BM_CTRL0_RXTO_MASK (0xff << 16)
/* TIMEOUT = (100*7+1)*(1/BAUD) */
#define ASM9260_BM_CTRL0_DEFAULT_RXTIMEOUT (20 << 16)
/* TX ctrl register */
#define ASM9260_HW_CTRL1 0x0010
/*
* RW. Tell the UART to execute the TX DMA Command. The
* UART will clear this bit at the end of transmit execution.
*/
#define ASM9260_BM_CTRL1_TXDMA_RUN BIT(28)
#define ASM9260_HW_CTRL2 0x0020
/*
* RW. Receive Interrupt FIFO Level Select.
* The trigger points for the receive interrupt are as follows:
* ONE_EIGHTHS = 0x0 Trigger on FIFO full to at least 2 of 16 entries.
* ONE_QUARTER = 0x1 Trigger on FIFO full to at least 4 of 16 entries.
* ONE_HALF = 0x2 Trigger on FIFO full to at least 8 of 16 entries.
* THREE_QUARTERS = 0x3 Trigger on FIFO full to at least 12 of 16 entries.
* SEVEN_EIGHTHS = 0x4 Trigger on FIFO full to at least 14 of 16 entries.
*/
#define ASM9260_BM_CTRL2_RXIFLSEL (7 << 20)
#define ASM9260_BM_CTRL2_DEFAULT_RXIFLSEL (3 << 20)
/* RW. Same as RXIFLSEL */
#define ASM9260_BM_CTRL2_TXIFLSEL (7 << 16)
#define ASM9260_BM_CTRL2_DEFAULT_TXIFLSEL (2 << 16)
/* RW. Set DTR. When this bit is 1, the output is 0. */
#define ASM9260_BM_CTRL2_DTR BIT(10)
/* RW. Loop Back Enable */
#define ASM9260_BM_CTRL2_LBE BIT(7)
#define ASM9260_BM_CTRL2_PORT_ENABLE BIT(0)
#define ASM9260_HW_LINECTRL 0x0030
/*
* RW. Stick Parity Select. When bits 1, 2, and 7 of this register are set, the
* parity bit is transmitted and checked as a 0. When bits 1 and 7 are set,
* and bit 2 is 0, the parity bit is transmitted and checked as a 1. When this
* bit is cleared stick parity is disabled.
*/
#define ASM9260_BM_LCTRL_SPS BIT(7)
/* RW. Word length */
#define ASM9260_BM_LCTRL_WLEN (3 << 5)
#define ASM9260_BM_LCTRL_CHRL_5 (0 << 5)
#define ASM9260_BM_LCTRL_CHRL_6 (1 << 5)
#define ASM9260_BM_LCTRL_CHRL_7 (2 << 5)
#define ASM9260_BM_LCTRL_CHRL_8 (3 << 5)
/*
* Interrupt register.
* contains the interrupt enables and the interrupt status bits
*/
#define ASM9260_HW_INTR 0x0040
/* Tx FIFO EMPTY Raw Interrupt enable */
#define ASM9260_BM_INTR_TFEIEN BIT(27)
/* Overrun Error Interrupt Enable. */
#define ASM9260_BM_INTR_OEIEN BIT(26)
/* Break Error Interrupt Enable. */
#define ASM9260_BM_INTR_BEIEN BIT(25)
/* Parity Error Interrupt Enable. */
#define ASM9260_BM_INTR_PEIEN BIT(24)
/* Framing Error Interrupt Enable. */
#define ASM9260_BM_INTR_FEIEN BIT(23)
/* nUARTDSR Modem Interrupt Enable. */
#define ASM9260_BM_INTR_DSRMIEN BIT(19)
/* nUARTDCD Modem Interrupt Enable. */
#define ASM9260_BM_INTR_DCDMIEN BIT(18)
/* nUARTRI Modem Interrupt Enable. */
#define ASM9260_BM_INTR_RIMIEN BIT(16)
/* Auto-Boud Timeout */
#define ASM9260_BM_INTR_ABTO BIT(13)
#define ASM9260_BM_INTR_ABEO BIT(12)
/* Tx FIFO EMPTY Raw Interrupt state */
#define ASM9260_BM_INTR_TFEIS BIT(11)
/* Overrun Error */
#define ASM9260_BM_INTR_OEIS BIT(10)
/* Break Error */
#define ASM9260_BM_INTR_BEIS BIT(9)
/* Parity Error */
#define ASM9260_BM_INTR_PEIS BIT(8)
/* Framing Error */
#define ASM9260_BM_INTR_FEIS BIT(7)
#define ASM9260_BM_INTR_DSRMIS BIT(3)
#define ASM9260_BM_INTR_DCDMIS BIT(2)
#define ASM9260_BM_INTR_RIMIS BIT(0)
/*
* RW. In DMA mode, up to 4 Received/Transmit characters can be accessed at a
* time. In PIO mode, only one character can be accessed at a time. The status
* register contains the receive data flags and valid bits.
*/
#define ASM9260_HW_DATA 0x0050
#define ASM9260_HW_STAT 0x0060
/* RO. If 1, UARTAPP is present in this product. */
#define ASM9260_BM_STAT_PRESENT BIT(31)
/* RO. If 1, HISPEED is present in this product. */
#define ASM9260_BM_STAT_HISPEED BIT(30)
/* RO. Receive FIFO Full. */
#define ASM9260_BM_STAT_RXFULL BIT(26)
/* RO. The UART Debug Register contains the state of the DMA signals. */
#define ASM9260_HW_DEBUG 0x0070
/* DMA Command Run Status */
#define ASM9260_BM_DEBUG_TXDMARUN BIT(5)
#define ASM9260_BM_DEBUG_RXDMARUN BIT(4)
/* DMA Command End Status */
#define ASM9260_BM_DEBUG_TXCMDEND BIT(3)
#define ASM9260_BM_DEBUG_RXCMDEND BIT(2)
/* DMA Request Status */
#define ASM9260_BM_DEBUG_TXDMARQ BIT(1)
#define ASM9260_BM_DEBUG_RXDMARQ BIT(0)
#define ASM9260_HW_ILPR 0x0080
#define ASM9260_HW_RS485CTRL 0x0090
/*
* RW. This bit reverses the polarity of the direction control signal on the RTS
* (or DTR) pin.
* If 0, The direction control pin will be driven to logic 0 when the
* transmitter has data to be sent. It will be driven to logic 1 after the
* last bit of data has been transmitted.
*/
#define ASM9260_BM_RS485CTRL_ONIV BIT(5)
/* RW. Enable Auto Direction Control. */
#define ASM9260_BM_RS485CTRL_DIR_CTRL BIT(4)
/*
* RW. If 0 and DIR_CTRL = 1, pin RTS is used for direction control.
* If 1 and DIR_CTRL = 1, pin DTR is used for direction control.
*/
#define ASM9260_BM_RS485CTRL_PINSEL BIT(3)
/* RW. Enable Auto Address Detect (AAD). */
#define ASM9260_BM_RS485CTRL_AADEN BIT(2)
/* RW. Disable receiver. */
#define ASM9260_BM_RS485CTRL_RXDIS BIT(1)
/* RW. Enable RS-485/EIA-485 Normal Multidrop Mode (NMM) */
#define ASM9260_BM_RS485CTRL_RS485EN BIT(0)
#define ASM9260_HW_RS485ADRMATCH 0x00a0
/* Contains the address match value. */
#define ASM9260_BM_RS485ADRMATCH_MASK (0xff << 0)
#define ASM9260_HW_RS485DLY 0x00b0
/*
* RW. Contains the direction control (RTS or DTR) delay value. This delay time
* is in periods of the baud clock.
*/
#define ASM9260_BM_RS485DLY_MASK (0xff << 0)
#define ASM9260_HW_AUTOBAUD 0x00c0
/* WO. Auto-baud time-out interrupt clear bit. */
#define ASM9260_BM_AUTOBAUD_TO_INT_CLR BIT(9)
/* WO. End of auto-baud interrupt clear bit. */
#define ASM9260_BM_AUTOBAUD_EO_INT_CLR BIT(8)
/* Restart in case of timeout (counter restarts at next UART Rx falling edge) */
#define ASM9260_BM_AUTOBAUD_AUTORESTART BIT(2)
/* Auto-baud mode select bit. 0 - Mode 0, 1 - Mode 1. */
#define ASM9260_BM_AUTOBAUD_MODE BIT(1)
/*
* Auto-baud start (auto-baud is running). Auto-baud run bit. This bit is
* automatically cleared after auto-baud completion.
*/
#define ASM9260_BM_AUTOBAUD_START BIT(0)
#define ASM9260_HW_CTRL3 0x00d0
#define ASM9260_BM_CTRL3_OUTCLK_DIV_MASK (0xffff << 16)
/*
* RW. Provide clk over OUTCLK pin. In case of asm9260 it can be configured on
* pins 137 and 144.
*/
#define ASM9260_BM_CTRL3_MASTERMODE BIT(6)
/* RW. Baud Rate Mode: 1 - Enable sync mode. 0 - async mode. */
#define ASM9260_BM_CTRL3_SYNCMODE BIT(4)
/* RW. 1 - MSB bit send frist; 0 - LSB bit frist. */
#define ASM9260_BM_CTRL3_MSBF BIT(2)
/* RW. 1 - sample rate = 8 x Baudrate; 0 - sample rate = 16 x Baudrate. */
#define ASM9260_BM_CTRL3_BAUD8 BIT(1)
/* RW. 1 - Set word length to 9bit. 0 - use ASM9260_BM_LCTRL_WLEN */
#define ASM9260_BM_CTRL3_9BIT BIT(0)
#define ASM9260_HW_ISO7816_CTRL 0x00e0
/* RW. Enable High Speed mode. */
#define ASM9260_BM_ISO7816CTRL_HS BIT(12)
/* Disable Successive Receive NACK */
#define ASM9260_BM_ISO7816CTRL_DS_NACK BIT(8)
#define ASM9260_BM_ISO7816CTRL_MAX_ITER_MASK (0xff << 4)
/* Receive NACK Inhibit */
#define ASM9260_BM_ISO7816CTRL_INACK BIT(3)
#define ASM9260_BM_ISO7816CTRL_NEG_DATA BIT(2)
/* RW. 1 - ISO7816 mode; 0 - USART mode */
#define ASM9260_BM_ISO7816CTRL_ENABLE BIT(0)
#define ASM9260_HW_ISO7816_ERRCNT 0x00f0
/* Parity error counter. Will be cleared after reading */
#define ASM9260_BM_ISO7816_NB_ERRORS_MASK (0xff << 0)
#define ASM9260_HW_ISO7816_STATUS 0x0100
/* Max number of Repetitions Reached */
#define ASM9260_BM_ISO7816_STAT_ITERATION BIT(0)
/* End of Alphascale asm9260 defines */
static struct uart_driver auart_driver;
enum mxs_auart_type {
IMX23_AUART,
IMX28_AUART,
ASM9260_AUART,
};
struct vendor_data {
const u16 *reg_offset;
};
enum {
REG_CTRL0,
REG_CTRL1,
REG_CTRL2,
REG_LINECTRL,
REG_LINECTRL2,
REG_INTR,
REG_DATA,
REG_STAT,
REG_DEBUG,
REG_VERSION,
REG_AUTOBAUD,
/* The size of the array - must be last */
REG_ARRAY_SIZE,
};
static const u16 mxs_asm9260_offsets[REG_ARRAY_SIZE] = {
[REG_CTRL0] = ASM9260_HW_CTRL0,
[REG_CTRL1] = ASM9260_HW_CTRL1,
[REG_CTRL2] = ASM9260_HW_CTRL2,
[REG_LINECTRL] = ASM9260_HW_LINECTRL,
[REG_INTR] = ASM9260_HW_INTR,
[REG_DATA] = ASM9260_HW_DATA,
[REG_STAT] = ASM9260_HW_STAT,
[REG_DEBUG] = ASM9260_HW_DEBUG,
[REG_AUTOBAUD] = ASM9260_HW_AUTOBAUD,
};
static const u16 mxs_stmp37xx_offsets[REG_ARRAY_SIZE] = {
[REG_CTRL0] = AUART_CTRL0,
[REG_CTRL1] = AUART_CTRL1,
[REG_CTRL2] = AUART_CTRL2,
[REG_LINECTRL] = AUART_LINECTRL,
[REG_LINECTRL2] = AUART_LINECTRL2,
[REG_INTR] = AUART_INTR,
[REG_DATA] = AUART_DATA,
[REG_STAT] = AUART_STAT,
[REG_DEBUG] = AUART_DEBUG,
[REG_VERSION] = AUART_VERSION,
[REG_AUTOBAUD] = AUART_AUTOBAUD,
};
static const struct vendor_data vendor_alphascale_asm9260 = {
.reg_offset = mxs_asm9260_offsets,
};
static const struct vendor_data vendor_freescale_stmp37xx = {
.reg_offset = mxs_stmp37xx_offsets,
};
struct mxs_auart_port {
struct uart_port port;
#define MXS_AUART_DMA_ENABLED 0x2
#define MXS_AUART_DMA_TX_SYNC 2 /* bit 2 */
#define MXS_AUART_DMA_RX_READY 3 /* bit 3 */
#define MXS_AUART_RTSCTS 4 /* bit 4 */
unsigned long flags;
unsigned int mctrl_prev;
enum mxs_auart_type devtype;
const struct vendor_data *vendor;
struct clk *clk;
struct clk *clk_ahb;
struct device *dev;
/* for DMA */
struct scatterlist tx_sgl;
struct dma_chan *tx_dma_chan;
void *tx_dma_buf;
struct scatterlist rx_sgl;
struct dma_chan *rx_dma_chan;
void *rx_dma_buf;
struct mctrl_gpios *gpios;
int gpio_irq[UART_GPIO_MAX];
bool ms_irq_enabled;
};
static const struct platform_device_id mxs_auart_devtype[] = {
{ .name = "mxs-auart-imx23", .driver_data = IMX23_AUART },
{ .name = "mxs-auart-imx28", .driver_data = IMX28_AUART },
{ .name = "as-auart-asm9260", .driver_data = ASM9260_AUART },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, mxs_auart_devtype);
static const struct of_device_id mxs_auart_dt_ids[] = {
{
.compatible = "fsl,imx28-auart",
.data = &mxs_auart_devtype[IMX28_AUART]
}, {
.compatible = "fsl,imx23-auart",
.data = &mxs_auart_devtype[IMX23_AUART]
}, {
.compatible = "alphascale,asm9260-auart",
.data = &mxs_auart_devtype[ASM9260_AUART]
}, { /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
static inline int is_imx28_auart(struct mxs_auart_port *s)
{
return s->devtype == IMX28_AUART;
}
static inline int is_asm9260_auart(struct mxs_auart_port *s)
{
return s->devtype == ASM9260_AUART;
}
static inline bool auart_dma_enabled(struct mxs_auart_port *s)
{
return s->flags & MXS_AUART_DMA_ENABLED;
}
static unsigned int mxs_reg_to_offset(const struct mxs_auart_port *uap,
unsigned int reg)
{
return uap->vendor->reg_offset[reg];
}
static unsigned int mxs_read(const struct mxs_auart_port *uap,
unsigned int reg)
{
void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg);
return readl_relaxed(addr);
}
static void mxs_write(unsigned int val, struct mxs_auart_port *uap,
unsigned int reg)
{
void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg);
writel_relaxed(val, addr);
}
static void mxs_set(unsigned int val, struct mxs_auart_port *uap,
unsigned int reg)
{
void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg);
writel_relaxed(val, addr + SET_REG);
}
static void mxs_clr(unsigned int val, struct mxs_auart_port *uap,
unsigned int reg)
{
void __iomem *addr = uap->port.membase + mxs_reg_to_offset(uap, reg);
writel_relaxed(val, addr + CLR_REG);
}
static void mxs_auart_stop_tx(struct uart_port *u);
#define to_auart_port(u) container_of(u, struct mxs_auart_port, port)
static void mxs_auart_tx_chars(struct mxs_auart_port *s);
static void dma_tx_callback(void *param)
{
struct mxs_auart_port *s = param;
struct circ_buf *xmit = &s->port.state->xmit;
dma_unmap_sg(s->dev, &s->tx_sgl, 1, DMA_TO_DEVICE);
/* clear the bit used to serialize the DMA tx. */
clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags);
smp_mb__after_atomic();
/* wake up the possible processes. */
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&s->port);
mxs_auart_tx_chars(s);
}
static int mxs_auart_dma_tx(struct mxs_auart_port *s, int size)
{
struct dma_async_tx_descriptor *desc;
struct scatterlist *sgl = &s->tx_sgl;
struct dma_chan *channel = s->tx_dma_chan;
u32 pio;
/* [1] : send PIO. Note, the first pio word is CTRL1. */
pio = AUART_CTRL1_XFER_COUNT(size);
desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)&pio,
1, DMA_TRANS_NONE, 0);
if (!desc) {
dev_err(s->dev, "step 1 error\n");
return -EINVAL;
}
/* [2] : set DMA buffer. */
sg_init_one(sgl, s->tx_dma_buf, size);
dma_map_sg(s->dev, sgl, 1, DMA_TO_DEVICE);
desc = dmaengine_prep_slave_sg(channel, sgl,
1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
dev_err(s->dev, "step 2 error\n");
return -EINVAL;
}
/* [3] : submit the DMA */
desc->callback = dma_tx_callback;
desc->callback_param = s;
dmaengine_submit(desc);
dma_async_issue_pending(channel);
return 0;
}
static void mxs_auart_tx_chars(struct mxs_auart_port *s)
{
struct circ_buf *xmit = &s->port.state->xmit;
if (auart_dma_enabled(s)) {
u32 i = 0;
int size;
void *buffer = s->tx_dma_buf;
if (test_and_set_bit(MXS_AUART_DMA_TX_SYNC, &s->flags))
return;
while (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) {
size = min_t(u32, UART_XMIT_SIZE - i,
CIRC_CNT_TO_END(xmit->head,
xmit->tail,
UART_XMIT_SIZE));
memcpy(buffer + i, xmit->buf + xmit->tail, size);
xmit->tail = (xmit->tail + size) & (UART_XMIT_SIZE - 1);
i += size;
if (i >= UART_XMIT_SIZE)
break;
}
if (uart_tx_stopped(&s->port))
mxs_auart_stop_tx(&s->port);
if (i) {
mxs_auart_dma_tx(s, i);
} else {
clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags);
smp_mb__after_atomic();
}
return;
}
while (!(mxs_read(s, REG_STAT) & AUART_STAT_TXFF)) {
if (s->port.x_char) {
s->port.icount.tx++;
mxs_write(s->port.x_char, s, REG_DATA);
s->port.x_char = 0;
continue;
}
if (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) {
s->port.icount.tx++;
mxs_write(xmit->buf[xmit->tail], s, REG_DATA);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
} else
break;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&s->port);
if (uart_circ_empty(&(s->port.state->xmit)))
mxs_clr(AUART_INTR_TXIEN, s, REG_INTR);
else
mxs_set(AUART_INTR_TXIEN, s, REG_INTR);
if (uart_tx_stopped(&s->port))
mxs_auart_stop_tx(&s->port);
}
static void mxs_auart_rx_char(struct mxs_auart_port *s)
{
int flag;
u32 stat;
u8 c;
c = mxs_read(s, REG_DATA);
stat = mxs_read(s, REG_STAT);
flag = TTY_NORMAL;
s->port.icount.rx++;
if (stat & AUART_STAT_BERR) {
s->port.icount.brk++;
if (uart_handle_break(&s->port))
goto out;
} else if (stat & AUART_STAT_PERR) {
s->port.icount.parity++;
} else if (stat & AUART_STAT_FERR) {
s->port.icount.frame++;
}
/*
* Mask off conditions which should be ingored.
*/
stat &= s->port.read_status_mask;
if (stat & AUART_STAT_BERR) {
flag = TTY_BREAK;
} else if (stat & AUART_STAT_PERR)
flag = TTY_PARITY;
else if (stat & AUART_STAT_FERR)
flag = TTY_FRAME;
if (stat & AUART_STAT_OERR)
s->port.icount.overrun++;
if (uart_handle_sysrq_char(&s->port, c))
goto out;
uart_insert_char(&s->port, stat, AUART_STAT_OERR, c, flag);
out:
mxs_write(stat, s, REG_STAT);
}
static void mxs_auart_rx_chars(struct mxs_auart_port *s)
{
u32 stat = 0;
for (;;) {
stat = mxs_read(s, REG_STAT);
if (stat & AUART_STAT_RXFE)
break;
mxs_auart_rx_char(s);
}
mxs_write(stat, s, REG_STAT);
tty_flip_buffer_push(&s->port.state->port);
}
static int mxs_auart_request_port(struct uart_port *u)
{
return 0;
}
static int mxs_auart_verify_port(struct uart_port *u,
struct serial_struct *ser)
{
if (u->type != PORT_UNKNOWN && u->type != PORT_IMX)
return -EINVAL;
return 0;
}
static void mxs_auart_config_port(struct uart_port *u, int flags)
{
}
static const char *mxs_auart_type(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
return dev_name(s->dev);
}
static void mxs_auart_release_port(struct uart_port *u)
{
}
static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
{
struct mxs_auart_port *s = to_auart_port(u);
u32 ctrl = mxs_read(s, REG_CTRL2);
ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS);
if (mctrl & TIOCM_RTS) {
if (uart_cts_enabled(u))
ctrl |= AUART_CTRL2_RTSEN;
else
ctrl |= AUART_CTRL2_RTS;
}
mxs_write(ctrl, s, REG_CTRL2);
mctrl_gpio_set(s->gpios, mctrl);
}
#define MCTRL_ANY_DELTA (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS)
static u32 mxs_auart_modem_status(struct mxs_auart_port *s, u32 mctrl)
{
u32 mctrl_diff;
mctrl_diff = mctrl ^ s->mctrl_prev;
s->mctrl_prev = mctrl;
if (mctrl_diff & MCTRL_ANY_DELTA && s->ms_irq_enabled &&
s->port.state != NULL) {
if (mctrl_diff & TIOCM_RI)
s->port.icount.rng++;
if (mctrl_diff & TIOCM_DSR)
s->port.icount.dsr++;
if (mctrl_diff & TIOCM_CD)
uart_handle_dcd_change(&s->port, mctrl & TIOCM_CD);
if (mctrl_diff & TIOCM_CTS)
uart_handle_cts_change(&s->port, mctrl & TIOCM_CTS);
wake_up_interruptible(&s->port.state->port.delta_msr_wait);
}
return mctrl;
}
static u32 mxs_auart_get_mctrl(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
u32 stat = mxs_read(s, REG_STAT);
u32 mctrl = 0;
if (stat & AUART_STAT_CTS)
mctrl |= TIOCM_CTS;
return mctrl_gpio_get(s->gpios, &mctrl);
}
/*
* Enable modem status interrupts
*/
static void mxs_auart_enable_ms(struct uart_port *port)
{
struct mxs_auart_port *s = to_auart_port(port);
/*
* Interrupt should not be enabled twice
*/
if (s->ms_irq_enabled)
return;
s->ms_irq_enabled = true;
if (s->gpio_irq[UART_GPIO_CTS] >= 0)
enable_irq(s->gpio_irq[UART_GPIO_CTS]);
/* TODO: enable AUART_INTR_CTSMIEN otherwise */
if (s->gpio_irq[UART_GPIO_DSR] >= 0)
enable_irq(s->gpio_irq[UART_GPIO_DSR]);
if (s->gpio_irq[UART_GPIO_RI] >= 0)
enable_irq(s->gpio_irq[UART_GPIO_RI]);
if (s->gpio_irq[UART_GPIO_DCD] >= 0)
enable_irq(s->gpio_irq[UART_GPIO_DCD]);
}
/*
* Disable modem status interrupts
*/
static void mxs_auart_disable_ms(struct uart_port *port)
{
struct mxs_auart_port *s = to_auart_port(port);
/*
* Interrupt should not be disabled twice
*/
if (!s->ms_irq_enabled)
return;
s->ms_irq_enabled = false;
if (s->gpio_irq[UART_GPIO_CTS] >= 0)
disable_irq(s->gpio_irq[UART_GPIO_CTS]);
/* TODO: disable AUART_INTR_CTSMIEN otherwise */
if (s->gpio_irq[UART_GPIO_DSR] >= 0)
disable_irq(s->gpio_irq[UART_GPIO_DSR]);
if (s->gpio_irq[UART_GPIO_RI] >= 0)
disable_irq(s->gpio_irq[UART_GPIO_RI]);
if (s->gpio_irq[UART_GPIO_DCD] >= 0)
disable_irq(s->gpio_irq[UART_GPIO_DCD]);
}
static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s);
static void dma_rx_callback(void *arg)
{
struct mxs_auart_port *s = (struct mxs_auart_port *) arg;
struct tty_port *port = &s->port.state->port;
int count;
u32 stat;
dma_unmap_sg(s->dev, &s->rx_sgl, 1, DMA_FROM_DEVICE);
stat = mxs_read(s, REG_STAT);
stat &= ~(AUART_STAT_OERR | AUART_STAT_BERR |
AUART_STAT_PERR | AUART_STAT_FERR);
count = stat & AUART_STAT_RXCOUNT_MASK;
tty_insert_flip_string(port, s->rx_dma_buf, count);
mxs_write(stat, s, REG_STAT);
tty_flip_buffer_push(port);
/* start the next DMA for RX. */
mxs_auart_dma_prep_rx(s);
}
static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s)
{
struct dma_async_tx_descriptor *desc;
struct scatterlist *sgl = &s->rx_sgl;
struct dma_chan *channel = s->rx_dma_chan;
u32 pio[1];
/* [1] : send PIO */
pio[0] = AUART_CTRL0_RXTO_ENABLE
| AUART_CTRL0_RXTIMEOUT(0x80)
| AUART_CTRL0_XFER_COUNT(UART_XMIT_SIZE);
desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
1, DMA_TRANS_NONE, 0);
if (!desc) {
dev_err(s->dev, "step 1 error\n");
return -EINVAL;
}
/* [2] : send DMA request */
sg_init_one(sgl, s->rx_dma_buf, UART_XMIT_SIZE);
dma_map_sg(s->dev, sgl, 1, DMA_FROM_DEVICE);
desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
dev_err(s->dev, "step 2 error\n");
return -1;
}
/* [3] : submit the DMA, but do not issue it. */
desc->callback = dma_rx_callback;
desc->callback_param = s;
dmaengine_submit(desc);
dma_async_issue_pending(channel);
return 0;
}
static void mxs_auart_dma_exit_channel(struct mxs_auart_port *s)
{
if (s->tx_dma_chan) {
dma_release_channel(s->tx_dma_chan);
s->tx_dma_chan = NULL;
}
if (s->rx_dma_chan) {
dma_release_channel(s->rx_dma_chan);
s->rx_dma_chan = NULL;
}
kfree(s->tx_dma_buf);
kfree(s->rx_dma_buf);
s->tx_dma_buf = NULL;
s->rx_dma_buf = NULL;
}
static void mxs_auart_dma_exit(struct mxs_auart_port *s)
{
mxs_clr(AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE | AUART_CTRL2_DMAONERR,
s, REG_CTRL2);
mxs_auart_dma_exit_channel(s);
s->flags &= ~MXS_AUART_DMA_ENABLED;
clear_bit(MXS_AUART_DMA_TX_SYNC, &s->flags);
clear_bit(MXS_AUART_DMA_RX_READY, &s->flags);
}
static int mxs_auart_dma_init(struct mxs_auart_port *s)
{
if (auart_dma_enabled(s))
return 0;
/* init for RX */
s->rx_dma_chan = dma_request_slave_channel(s->dev, "rx");
if (!s->rx_dma_chan)
goto err_out;
s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
if (!s->rx_dma_buf)
goto err_out;
/* init for TX */
s->tx_dma_chan = dma_request_slave_channel(s->dev, "tx");
if (!s->tx_dma_chan)
goto err_out;
s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
if (!s->tx_dma_buf)
goto err_out;
/* set the flags */
s->flags |= MXS_AUART_DMA_ENABLED;
dev_dbg(s->dev, "enabled the DMA support.");
/* The DMA buffer is now the FIFO the TTY subsystem can use */
s->port.fifosize = UART_XMIT_SIZE;
return 0;
err_out:
mxs_auart_dma_exit_channel(s);
return -EINVAL;
}
#define RTS_AT_AUART() IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(s->gpios, \
UART_GPIO_RTS))
#define CTS_AT_AUART() IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(s->gpios, \
UART_GPIO_CTS))
static void mxs_auart_settermios(struct uart_port *u,
struct ktermios *termios,
struct ktermios *old)
{
struct mxs_auart_port *s = to_auart_port(u);
u32 bm, ctrl, ctrl2, div;
unsigned int cflag, baud, baud_min, baud_max;
cflag = termios->c_cflag;
ctrl = AUART_LINECTRL_FEN;
ctrl2 = mxs_read(s, REG_CTRL2);
/* byte size */
switch (cflag & CSIZE) {
case CS5:
bm = 0;
break;
case CS6:
bm = 1;
break;
case CS7:
bm = 2;
break;
case CS8:
bm = 3;
break;
default:
return;
}
ctrl |= AUART_LINECTRL_WLEN(bm);
/* parity */
if (cflag & PARENB) {
ctrl |= AUART_LINECTRL_PEN;
if ((cflag & PARODD) == 0)
ctrl |= AUART_LINECTRL_EPS;
}
u->read_status_mask = 0;
if (termios->c_iflag & INPCK)
u->read_status_mask |= AUART_STAT_PERR;
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
u->read_status_mask |= AUART_STAT_BERR;
/*
* Characters to ignore
*/
u->ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
u->ignore_status_mask |= AUART_STAT_PERR;
if (termios->c_iflag & IGNBRK) {
u->ignore_status_mask |= AUART_STAT_BERR;
/*
* If we're ignoring parity and break indicators,
* ignore overruns too (for real raw support).
*/
if (termios->c_iflag & IGNPAR)
u->ignore_status_mask |= AUART_STAT_OERR;
}
/*
* ignore all characters if CREAD is not set
*/
if (cflag & CREAD)
ctrl2 |= AUART_CTRL2_RXE;
else
ctrl2 &= ~AUART_CTRL2_RXE;
/* figure out the stop bits requested */
if (cflag & CSTOPB)
ctrl |= AUART_LINECTRL_STP2;
/* figure out the hardware flow control settings */
ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN);
if (cflag & CRTSCTS) {
/*
* The DMA has a bug(see errata:2836) in mx23.
* So we can not implement the DMA for auart in mx23,
* we can only implement the DMA support for auart
* in mx28.
*/
if (is_imx28_auart(s)
&& test_bit(MXS_AUART_RTSCTS, &s->flags)) {
if (!mxs_auart_dma_init(s))
/* enable DMA tranfer */
ctrl2 |= AUART_CTRL2_TXDMAE | AUART_CTRL2_RXDMAE
| AUART_CTRL2_DMAONERR;
}
/* Even if RTS is GPIO line RTSEN can be enabled because
* the pinctrl configuration decides about RTS pin function */
ctrl2 |= AUART_CTRL2_RTSEN;
if (CTS_AT_AUART())
ctrl2 |= AUART_CTRL2_CTSEN;
}
/* set baud rate */
if (is_asm9260_auart(s)) {
baud = uart_get_baud_rate(u, termios, old,
u->uartclk * 4 / 0x3FFFFF,
u->uartclk / 16);
div = u->uartclk * 4 / baud;
} else {
baud_min = DIV_ROUND_UP(u->uartclk * 32,
AUART_LINECTRL_BAUD_DIV_MAX);
baud_max = u->uartclk * 32 / AUART_LINECTRL_BAUD_DIV_MIN;
baud = uart_get_baud_rate(u, termios, old, baud_min, baud_max);
div = u->uartclk * 32 / baud;
}
ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F);
ctrl |= AUART_LINECTRL_BAUD_DIVINT(div >> 6);
mxs_write(ctrl, s, REG_LINECTRL);
mxs_write(ctrl2, s, REG_CTRL2);
uart_update_timeout(u, termios->c_cflag, baud);
/* prepare for the DMA RX. */
if (auart_dma_enabled(s) &&
!test_and_set_bit(MXS_AUART_DMA_RX_READY, &s->flags)) {
if (!mxs_auart_dma_prep_rx(s)) {
/* Disable the normal RX interrupt. */
mxs_clr(AUART_INTR_RXIEN | AUART_INTR_RTIEN,
s, REG_INTR);
} else {
mxs_auart_dma_exit(s);
dev_err(s->dev, "We can not start up the DMA.\n");
}
}
/* CTS flow-control and modem-status interrupts */
if (UART_ENABLE_MS(u, termios->c_cflag))
mxs_auart_enable_ms(u);
else
mxs_auart_disable_ms(u);
}
static void mxs_auart_set_ldisc(struct uart_port *port,
struct ktermios *termios)
{
if (termios->c_line == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
mxs_auart_enable_ms(port);
} else {
port->flags &= ~UPF_HARDPPS_CD;
}
}
static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
{
u32 istat;
struct mxs_auart_port *s = context;
u32 mctrl_temp = s->mctrl_prev;
u32 stat = mxs_read(s, REG_STAT);
istat = mxs_read(s, REG_INTR);
/* ack irq */
mxs_clr(istat & (AUART_INTR_RTIS | AUART_INTR_TXIS | AUART_INTR_RXIS
| AUART_INTR_CTSMIS), s, REG_INTR);
/*
* Dealing with GPIO interrupt
*/
if (irq == s->gpio_irq[UART_GPIO_CTS] ||
irq == s->gpio_irq[UART_GPIO_DCD] ||
irq == s->gpio_irq[UART_GPIO_DSR] ||
irq == s->gpio_irq[UART_GPIO_RI])
mxs_auart_modem_status(s,
mctrl_gpio_get(s->gpios, &mctrl_temp));
if (istat & AUART_INTR_CTSMIS) {
if (CTS_AT_AUART() && s->ms_irq_enabled)
uart_handle_cts_change(&s->port,
stat & AUART_STAT_CTS);
mxs_clr(AUART_INTR_CTSMIS, s, REG_INTR);
istat &= ~AUART_INTR_CTSMIS;
}
if (istat & (AUART_INTR_RTIS | AUART_INTR_RXIS)) {
if (!auart_dma_enabled(s))
mxs_auart_rx_chars(s);
istat &= ~(AUART_INTR_RTIS | AUART_INTR_RXIS);
}
if (istat & AUART_INTR_TXIS) {
mxs_auart_tx_chars(s);
istat &= ~AUART_INTR_TXIS;
}
return IRQ_HANDLED;
}
static void mxs_auart_reset_deassert(struct mxs_auart_port *s)
{
int i;
unsigned int reg;
mxs_clr(AUART_CTRL0_SFTRST, s, REG_CTRL0);
for (i = 0; i < 10000; i++) {
reg = mxs_read(s, REG_CTRL0);
if (!(reg & AUART_CTRL0_SFTRST))
break;
udelay(3);
}
mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0);
}
static void mxs_auart_reset_assert(struct mxs_auart_port *s)
{
int i;
u32 reg;
reg = mxs_read(s, REG_CTRL0);
/* if already in reset state, keep it untouched */
if (reg & AUART_CTRL0_SFTRST)
return;
mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0);
mxs_set(AUART_CTRL0_SFTRST, s, REG_CTRL0);
for (i = 0; i < 1000; i++) {
reg = mxs_read(s, REG_CTRL0);
/* reset is finished when the clock is gated */
if (reg & AUART_CTRL0_CLKGATE)
return;
udelay(10);
}
dev_err(s->dev, "Failed to reset the unit.");
}
static int mxs_auart_startup(struct uart_port *u)
{
int ret;
struct mxs_auart_port *s = to_auart_port(u);
ret = clk_prepare_enable(s->clk);
if (ret)
return ret;
if (uart_console(u)) {
mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0);
} else {
/* reset the unit to a well known state */
mxs_auart_reset_assert(s);
mxs_auart_reset_deassert(s);
}
mxs_set(AUART_CTRL2_UARTEN, s, REG_CTRL2);
mxs_write(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
s, REG_INTR);
/* Reset FIFO size (it could have changed if DMA was enabled) */
u->fifosize = MXS_AUART_FIFO_SIZE;
/*
* Enable fifo so all four bytes of a DMA word are written to
* output (otherwise, only the LSB is written, ie. 1 in 4 bytes)
*/
mxs_set(AUART_LINECTRL_FEN, s, REG_LINECTRL);
/* get initial status of modem lines */
mctrl_gpio_get(s->gpios, &s->mctrl_prev);
s->ms_irq_enabled = false;
return 0;
}
static void mxs_auart_shutdown(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
mxs_auart_disable_ms(u);
if (auart_dma_enabled(s))
mxs_auart_dma_exit(s);
if (uart_console(u)) {
mxs_clr(AUART_CTRL2_UARTEN, s, REG_CTRL2);
mxs_clr(AUART_INTR_RXIEN | AUART_INTR_RTIEN |
AUART_INTR_CTSMIEN, s, REG_INTR);
mxs_set(AUART_CTRL0_CLKGATE, s, REG_CTRL0);
} else {
mxs_auart_reset_assert(s);
}
clk_disable_unprepare(s->clk);
}
static unsigned int mxs_auart_tx_empty(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
if ((mxs_read(s, REG_STAT) &
(AUART_STAT_TXFE | AUART_STAT_BUSY)) == AUART_STAT_TXFE)
return TIOCSER_TEMT;
return 0;
}
static void mxs_auart_start_tx(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
/* enable transmitter */
mxs_set(AUART_CTRL2_TXE, s, REG_CTRL2);
mxs_auart_tx_chars(s);
}
static void mxs_auart_stop_tx(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
mxs_clr(AUART_CTRL2_TXE, s, REG_CTRL2);
}
static void mxs_auart_stop_rx(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
mxs_clr(AUART_CTRL2_RXE, s, REG_CTRL2);
}
static void mxs_auart_break_ctl(struct uart_port *u, int ctl)
{
struct mxs_auart_port *s = to_auart_port(u);
if (ctl)
mxs_set(AUART_LINECTRL_BRK, s, REG_LINECTRL);
else
mxs_clr(AUART_LINECTRL_BRK, s, REG_LINECTRL);
}
static const struct uart_ops mxs_auart_ops = {
.tx_empty = mxs_auart_tx_empty,
.start_tx = mxs_auart_start_tx,
.stop_tx = mxs_auart_stop_tx,
.stop_rx = mxs_auart_stop_rx,
.enable_ms = mxs_auart_enable_ms,
.break_ctl = mxs_auart_break_ctl,
.set_mctrl = mxs_auart_set_mctrl,
.get_mctrl = mxs_auart_get_mctrl,
.startup = mxs_auart_startup,
.shutdown = mxs_auart_shutdown,
.set_termios = mxs_auart_settermios,
.set_ldisc = mxs_auart_set_ldisc,
.type = mxs_auart_type,
.release_port = mxs_auart_release_port,
.request_port = mxs_auart_request_port,
.config_port = mxs_auart_config_port,
.verify_port = mxs_auart_verify_port,
};
static struct mxs_auart_port *auart_port[MXS_AUART_PORTS];
#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
static void mxs_auart_console_putchar(struct uart_port *port, int ch)
{
struct mxs_auart_port *s = to_auart_port(port);
unsigned int to = 1000;
while (mxs_read(s, REG_STAT) & AUART_STAT_TXFF) {
if (!to--)
break;
udelay(1);
}
mxs_write(ch, s, REG_DATA);
}
static void
auart_console_write(struct console *co, const char *str, unsigned int count)
{
struct mxs_auart_port *s;
struct uart_port *port;
unsigned int old_ctrl0, old_ctrl2;
unsigned int to = 20000;
if (co->index >= MXS_AUART_PORTS || co->index < 0)
return;
s = auart_port[co->index];
port = &s->port;
clk_enable(s->clk);
/* First save the CR then disable the interrupts */
old_ctrl2 = mxs_read(s, REG_CTRL2);
old_ctrl0 = mxs_read(s, REG_CTRL0);
mxs_clr(AUART_CTRL0_CLKGATE, s, REG_CTRL0);
mxs_set(AUART_CTRL2_UARTEN | AUART_CTRL2_TXE, s, REG_CTRL2);
uart_console_write(port, str, count, mxs_auart_console_putchar);
/* Finally, wait for transmitter to become empty ... */
while (mxs_read(s, REG_STAT) & AUART_STAT_BUSY) {
udelay(1);
if (!to--)
break;
}
/*
* ... and restore the TCR if we waited long enough for the transmitter
* to be idle. This might keep the transmitter enabled although it is
* unused, but that is better than to disable it while it is still
* transmitting.
*/
if (!(mxs_read(s, REG_STAT) & AUART_STAT_BUSY)) {
mxs_write(old_ctrl0, s, REG_CTRL0);
mxs_write(old_ctrl2, s, REG_CTRL2);
}
clk_disable(s->clk);
}
static void __init
auart_console_get_options(struct mxs_auart_port *s, int *baud,
int *parity, int *bits)
{
struct uart_port *port = &s->port;
unsigned int lcr_h, quot;
if (!(mxs_read(s, REG_CTRL2) & AUART_CTRL2_UARTEN))
return;
lcr_h = mxs_read(s, REG_LINECTRL);
*parity = 'n';
if (lcr_h & AUART_LINECTRL_PEN) {
if (lcr_h & AUART_LINECTRL_EPS)
*parity = 'e';
else
*parity = 'o';
}
if ((lcr_h & AUART_LINECTRL_WLEN_MASK) == AUART_LINECTRL_WLEN(2))
*bits = 7;
else
*bits = 8;
quot = ((mxs_read(s, REG_LINECTRL) & AUART_LINECTRL_BAUD_DIVINT_MASK))
>> (AUART_LINECTRL_BAUD_DIVINT_SHIFT - 6);
quot |= ((mxs_read(s, REG_LINECTRL) & AUART_LINECTRL_BAUD_DIVFRAC_MASK))
>> AUART_LINECTRL_BAUD_DIVFRAC_SHIFT;
if (quot == 0)
quot = 1;
*baud = (port->uartclk << 2) / quot;
}
static int __init
auart_console_setup(struct console *co, char *options)
{
struct mxs_auart_port *s;
int baud = 9600;
int bits = 8;
int parity = 'n';
int flow = 'n';
int ret;
/*
* Check whether an invalid uart number has been specified, and
* if so, search for the first available port that does have
* console support.
*/
if (co->index == -1 || co->index >= ARRAY_SIZE(auart_port))
co->index = 0;
s = auart_port[co->index];
if (!s)
return -ENODEV;
ret = clk_prepare_enable(s->clk);
if (ret)
return ret;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
auart_console_get_options(s, &baud, &parity, &bits);
ret = uart_set_options(&s->port, co, baud, parity, bits, flow);
clk_disable_unprepare(s->clk);
return ret;
}
static struct console auart_console = {
.name = "ttyAPP",
.write = auart_console_write,
.device = uart_console_device,
.setup = auart_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &auart_driver,
};
#endif
static struct uart_driver auart_driver = {
.owner = THIS_MODULE,
.driver_name = "ttyAPP",
.dev_name = "ttyAPP",
.major = 0,
.minor = 0,
.nr = MXS_AUART_PORTS,
#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
.cons = &auart_console,
#endif
};
static void mxs_init_regs(struct mxs_auart_port *s)
{
if (is_asm9260_auart(s))
s->vendor = &vendor_alphascale_asm9260;
else
s->vendor = &vendor_freescale_stmp37xx;
}
static int mxs_get_clks(struct mxs_auart_port *s,
struct platform_device *pdev)
{
int err;
if (!is_asm9260_auart(s)) {
s->clk = devm_clk_get(&pdev->dev, NULL);
return PTR_ERR_OR_ZERO(s->clk);
}
s->clk = devm_clk_get(s->dev, "mod");
if (IS_ERR(s->clk)) {
dev_err(s->dev, "Failed to get \"mod\" clk\n");
return PTR_ERR(s->clk);
}
s->clk_ahb = devm_clk_get(s->dev, "ahb");
if (IS_ERR(s->clk_ahb)) {
dev_err(s->dev, "Failed to get \"ahb\" clk\n");
return PTR_ERR(s->clk_ahb);
}
err = clk_prepare_enable(s->clk_ahb);
if (err) {
dev_err(s->dev, "Failed to enable ahb_clk!\n");
return err;
}
err = clk_set_rate(s->clk, clk_get_rate(s->clk_ahb));
if (err) {
dev_err(s->dev, "Failed to set rate!\n");
goto disable_clk_ahb;
}
err = clk_prepare_enable(s->clk);
if (err) {
dev_err(s->dev, "Failed to enable clk!\n");
goto disable_clk_ahb;
}
return 0;
disable_clk_ahb:
clk_disable_unprepare(s->clk_ahb);
return err;
}
/*
* This function returns 1 if pdev isn't a device instatiated by dt, 0 if it
* could successfully get all information from dt or a negative errno.
*/
static int serial_mxs_probe_dt(struct mxs_auart_port *s,
struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
int ret;
if (!np)
/* no device tree device */
return 1;
ret = of_alias_get_id(np, "serial");
if (ret < 0) {
dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
return ret;
}
s->port.line = ret;
if (of_get_property(np, "uart-has-rtscts", NULL) ||
of_get_property(np, "fsl,uart-has-rtscts", NULL) /* deprecated */)
set_bit(MXS_AUART_RTSCTS, &s->flags);
return 0;
}
static int mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev)
{
enum mctrl_gpio_idx i;
struct gpio_desc *gpiod;
s->gpios = mctrl_gpio_init_noauto(dev, 0);
if (IS_ERR(s->gpios))
return PTR_ERR(s->gpios);
/* Block (enabled before) DMA option if RTS or CTS is GPIO line */
if (!RTS_AT_AUART() || !CTS_AT_AUART()) {
if (test_bit(MXS_AUART_RTSCTS, &s->flags))
dev_warn(dev,
"DMA and flow control via gpio may cause some problems. DMA disabled!\n");
clear_bit(MXS_AUART_RTSCTS, &s->flags);
}
for (i = 0; i < UART_GPIO_MAX; i++) {
gpiod = mctrl_gpio_to_gpiod(s->gpios, i);
if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN))
s->gpio_irq[i] = gpiod_to_irq(gpiod);
else
s->gpio_irq[i] = -EINVAL;
}
return 0;
}
static void mxs_auart_free_gpio_irq(struct mxs_auart_port *s)
{
enum mctrl_gpio_idx i;
for (i = 0; i < UART_GPIO_MAX; i++)
if (s->gpio_irq[i] >= 0)
free_irq(s->gpio_irq[i], s);
}
static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s)
{
int *irq = s->gpio_irq;
enum mctrl_gpio_idx i;
int err = 0;
for (i = 0; (i < UART_GPIO_MAX) && !err; i++) {
if (irq[i] < 0)
continue;
irq_set_status_flags(irq[i], IRQ_NOAUTOEN);
err = request_irq(irq[i], mxs_auart_irq_handle,
IRQ_TYPE_EDGE_BOTH, dev_name(s->dev), s);
if (err)
dev_err(s->dev, "%s - Can't get %d irq\n",
__func__, irq[i]);
}
/*
* If something went wrong, rollback.
*/
while (err && (--i >= 0))
if (irq[i] >= 0)
free_irq(irq[i], s);
return err;
}
static int mxs_auart_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(mxs_auart_dt_ids, &pdev->dev);
struct mxs_auart_port *s;
u32 version;
int ret, irq;
struct resource *r;
s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
s->port.dev = &pdev->dev;
s->dev = &pdev->dev;
ret = serial_mxs_probe_dt(s, pdev);
if (ret > 0)
s->port.line = pdev->id < 0 ? 0 : pdev->id;
else if (ret < 0)
return ret;
if (of_id) {
pdev->id_entry = of_id->data;
s->devtype = pdev->id_entry->driver_data;
}
ret = mxs_get_clks(s, pdev);
if (ret)
return ret;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r)
return -ENXIO;
s->port.mapbase = r->start;
s->port.membase = ioremap(r->start, resource_size(r));
s->port.ops = &mxs_auart_ops;
s->port.iotype = UPIO_MEM;
s->port.fifosize = MXS_AUART_FIFO_SIZE;
s->port.uartclk = clk_get_rate(s->clk);
s->port.type = PORT_IMX;
mxs_init_regs(s);
s->mctrl_prev = 0;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
s->port.irq = irq;
ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0,
dev_name(&pdev->dev), s);
if (ret)
return ret;
platform_set_drvdata(pdev, s);
ret = mxs_auart_init_gpios(s, &pdev->dev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize GPIOs.\n");
return ret;
}
/*
* Get the GPIO lines IRQ
*/
ret = mxs_auart_request_gpio_irq(s);
if (ret)
return ret;
auart_port[s->port.line] = s;
mxs_auart_reset_deassert(s);
ret = uart_add_one_port(&auart_driver, &s->port);
if (ret)
goto out_free_gpio_irq;
/* ASM9260 don't have version reg */
if (is_asm9260_auart(s)) {
dev_info(&pdev->dev, "Found APPUART ASM9260\n");
} else {
version = mxs_read(s, REG_VERSION);
dev_info(&pdev->dev, "Found APPUART %d.%d.%d\n",
(version >> 24) & 0xff,
(version >> 16) & 0xff, version & 0xffff);
}
return 0;
out_free_gpio_irq:
mxs_auart_free_gpio_irq(s);
auart_port[pdev->id] = NULL;
return ret;
}
static int mxs_auart_remove(struct platform_device *pdev)
{
struct mxs_auart_port *s = platform_get_drvdata(pdev);
uart_remove_one_port(&auart_driver, &s->port);
auart_port[pdev->id] = NULL;
mxs_auart_free_gpio_irq(s);
return 0;
}
static struct platform_driver mxs_auart_driver = {
.probe = mxs_auart_probe,
.remove = mxs_auart_remove,
.driver = {
.name = "mxs-auart",
.of_match_table = mxs_auart_dt_ids,
},
};
static int __init mxs_auart_init(void)
{
int r;
r = uart_register_driver(&auart_driver);
if (r)
goto out;
r = platform_driver_register(&mxs_auart_driver);
if (r)
goto out_err;
return 0;
out_err:
uart_unregister_driver(&auart_driver);
out:
return r;
}
static void __exit mxs_auart_exit(void)
{
platform_driver_unregister(&mxs_auart_driver);
uart_unregister_driver(&auart_driver);
}
module_init(mxs_auart_init);
module_exit(mxs_auart_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Freescale MXS application uart driver");
MODULE_ALIAS("platform:mxs-auart");