mirror of https://gitee.com/openkylin/linux.git
137 lines
3.4 KiB
C
137 lines
3.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (c) 2009,2018 Daniel Mack <daniel@zonque.org>
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
|
|
#define LED_LT3593_NAME "lt3593"
|
|
|
|
struct lt3593_led_data {
|
|
struct led_classdev cdev;
|
|
struct gpio_desc *gpiod;
|
|
};
|
|
|
|
static int lt3593_led_set(struct led_classdev *led_cdev,
|
|
enum led_brightness value)
|
|
{
|
|
struct lt3593_led_data *led_dat =
|
|
container_of(led_cdev, struct lt3593_led_data, cdev);
|
|
int pulses;
|
|
|
|
/*
|
|
* The LT3593 resets its internal current level register to the maximum
|
|
* level on the first falling edge on the control pin. Each following
|
|
* falling edge decreases the current level by 625uA. Up to 32 pulses
|
|
* can be sent, so the maximum power reduction is 20mA.
|
|
* After a timeout of 128us, the value is taken from the register and
|
|
* applied is to the output driver.
|
|
*/
|
|
|
|
if (value == 0) {
|
|
gpiod_set_value_cansleep(led_dat->gpiod, 0);
|
|
return 0;
|
|
}
|
|
|
|
pulses = 32 - (value * 32) / 255;
|
|
|
|
if (pulses == 0) {
|
|
gpiod_set_value_cansleep(led_dat->gpiod, 0);
|
|
mdelay(1);
|
|
gpiod_set_value_cansleep(led_dat->gpiod, 1);
|
|
return 0;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(led_dat->gpiod, 1);
|
|
|
|
while (pulses--) {
|
|
gpiod_set_value_cansleep(led_dat->gpiod, 0);
|
|
udelay(1);
|
|
gpiod_set_value_cansleep(led_dat->gpiod, 1);
|
|
udelay(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt3593_led_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct lt3593_led_data *led_data;
|
|
struct fwnode_handle *child;
|
|
int ret, state = LEDS_GPIO_DEFSTATE_OFF;
|
|
struct led_init_data init_data = {};
|
|
const char *tmp;
|
|
|
|
if (!dev->of_node)
|
|
return -ENODEV;
|
|
|
|
led_data = devm_kzalloc(dev, sizeof(*led_data), GFP_KERNEL);
|
|
if (!led_data)
|
|
return -ENOMEM;
|
|
|
|
if (device_get_child_node_count(dev) != 1) {
|
|
dev_err(dev, "Device must have exactly one LED sub-node.");
|
|
return -EINVAL;
|
|
}
|
|
|
|
led_data->gpiod = devm_gpiod_get(dev, "lltc,ctrl", 0);
|
|
if (IS_ERR(led_data->gpiod))
|
|
return PTR_ERR(led_data->gpiod);
|
|
|
|
child = device_get_next_child_node(dev, NULL);
|
|
|
|
fwnode_property_read_string(child, "linux,default-trigger",
|
|
&led_data->cdev.default_trigger);
|
|
|
|
if (!fwnode_property_read_string(child, "default-state", &tmp)) {
|
|
if (!strcmp(tmp, "on"))
|
|
state = LEDS_GPIO_DEFSTATE_ON;
|
|
}
|
|
|
|
led_data->cdev.brightness_set_blocking = lt3593_led_set;
|
|
led_data->cdev.brightness = state ? LED_FULL : LED_OFF;
|
|
|
|
init_data.fwnode = child;
|
|
init_data.devicename = LED_LT3593_NAME;
|
|
init_data.default_label = ":";
|
|
|
|
ret = devm_led_classdev_register_ext(dev, &led_data->cdev, &init_data);
|
|
if (ret < 0) {
|
|
fwnode_handle_put(child);
|
|
return ret;
|
|
}
|
|
|
|
led_data->cdev.dev->of_node = dev->of_node;
|
|
platform_set_drvdata(pdev, led_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id of_lt3593_leds_match[] = {
|
|
{ .compatible = "lltc,lt3593", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_lt3593_leds_match);
|
|
|
|
static struct platform_driver lt3593_led_driver = {
|
|
.probe = lt3593_led_probe,
|
|
.driver = {
|
|
.name = "leds-lt3593",
|
|
.of_match_table = of_match_ptr(of_lt3593_leds_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(lt3593_led_driver);
|
|
|
|
MODULE_AUTHOR("Daniel Mack <daniel@zonque.org>");
|
|
MODULE_DESCRIPTION("LED driver for LT3593 controllers");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:leds-lt3593");
|