linux/arch/arm/boot/dts/at91sam9g25ek.dts

70 lines
1.4 KiB
Plaintext

/*
* at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
*
* Copyright (C) 2012 Atmel,
* 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
#include "at91sam9g25.dtsi"
#include "at91sam9x5ek.dtsi"
/ {
model = "Atmel AT91SAM9G25-EK";
compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
ahb {
apb {
spi0: spi@f0000000 {
status = "disabled";
};
mmc1: mmc@f000c000 {
status = "disabled";
};
i2c0: i2c@f8010000 {
ov2640: camera@30 {
compatible = "ovti,ov2640";
reg = <0x30>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
clocks = <&pmc PMC_TYPE_SYSTEM 8>;
clock-names = "xvclk";
assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
assigned-clock-rates = <25000000>;
status = "okay";
port {
ov2640_0: endpoint {
remote-endpoint = <&isi_0>;
bus-width = <8>;
};
};
};
};
macb0: ethernet@f802c000 {
phy-mode = "rmii";
status = "okay";
};
isi: isi@f8048000 {
status = "okay";
port {
isi_0: endpoint@0 {
reg = <0>;
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
vsync-active = <1>;
hsync-active = <1>;
};
};
};
};
};
};