mirror of https://gitee.com/openkylin/linux.git
659 lines
20 KiB
C
659 lines
20 KiB
C
/******************************************************************************
|
|
*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
|
|
* USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.GPL.
|
|
*
|
|
* Contact Information:
|
|
* Intel Linux Wireless <ilw@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*****************************************************************************/
|
|
#ifndef __iwl_shared_h__
|
|
#define __iwl_shared_h__
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/mm.h> /* for page_address */
|
|
#include <net/mac80211.h>
|
|
|
|
#include "iwl-commands.h"
|
|
|
|
/**
|
|
* DOC: shared area - role and goal
|
|
*
|
|
* The shared area contains all the data exported by the upper layer to the
|
|
* other layers. Since the bus and transport layer shouldn't dereference
|
|
* iwl_priv, all the data needed by the upper layer and the transport / bus
|
|
* layer must be here.
|
|
* The shared area also holds pointer to all the other layers. This allows a
|
|
* layer to call a function from another layer.
|
|
*
|
|
* NOTE: All the layers hold a pointer to the shared area which must be shrd.
|
|
* A few macros assume that (_m)->shrd points to the shared area no matter
|
|
* what _m is.
|
|
*
|
|
* gets notifications about enumeration, suspend, resume.
|
|
* For the moment, the bus layer is not a linux kernel module as itself, and
|
|
* the module_init function of the driver must call the bus specific
|
|
* registration functions. These functions are listed at the end of this file.
|
|
* For the moment, there is only one implementation of this interface: PCI-e.
|
|
* This implementation is iwl-pci.c
|
|
*/
|
|
|
|
struct iwl_bus;
|
|
struct iwl_priv;
|
|
struct iwl_trans;
|
|
struct iwl_sensitivity_ranges;
|
|
struct iwl_trans_ops;
|
|
|
|
#define DRV_NAME "iwlwifi"
|
|
#define IWLWIFI_VERSION "in-tree:"
|
|
#define DRV_COPYRIGHT "Copyright(c) 2003-2012 Intel Corporation"
|
|
#define DRV_AUTHOR "<ilw@linux.intel.com>"
|
|
|
|
extern struct iwl_mod_params iwlagn_mod_params;
|
|
|
|
#define IWL_DISABLE_HT_ALL BIT(0)
|
|
#define IWL_DISABLE_HT_TXAGG BIT(1)
|
|
#define IWL_DISABLE_HT_RXAGG BIT(2)
|
|
|
|
/**
|
|
* struct iwl_mod_params
|
|
*
|
|
* Holds the module parameters
|
|
*
|
|
* @sw_crypto: using hardware encryption, default = 0
|
|
* @num_of_queues: number of tx queue, HW dependent
|
|
* @disable_11n: disable 11n capabilities, default = 0,
|
|
* use IWL_DISABLE_HT_* constants
|
|
* @amsdu_size_8K: enable 8K amsdu size, default = 1
|
|
* @antenna: both antennas (use diversity), default = 0
|
|
* @restart_fw: restart firmware, default = 1
|
|
* @plcp_check: enable plcp health check, default = true
|
|
* @ack_check: disable ack health check, default = false
|
|
* @wd_disable: enable stuck queue check, default = 0
|
|
* @bt_coex_active: enable bt coex, default = true
|
|
* @led_mode: system default, default = 0
|
|
* @no_sleep_autoadjust: disable autoadjust, default = true
|
|
* @power_save: disable power save, default = false
|
|
* @power_level: power level, default = 1
|
|
* @debug_level: levels are IWL_DL_*
|
|
* @ant_coupling: antenna coupling in dB, default = 0
|
|
* @bt_ch_announce: BT channel inhibition, default = enable
|
|
* @wanted_ucode_alternative: ucode alternative to use, default = 1
|
|
* @auto_agg: enable agg. without check, default = true
|
|
*/
|
|
struct iwl_mod_params {
|
|
int sw_crypto;
|
|
int num_of_queues;
|
|
unsigned int disable_11n;
|
|
int amsdu_size_8K;
|
|
int antenna;
|
|
int restart_fw;
|
|
bool plcp_check;
|
|
bool ack_check;
|
|
int wd_disable;
|
|
bool bt_coex_active;
|
|
int led_mode;
|
|
bool no_sleep_autoadjust;
|
|
bool power_save;
|
|
int power_level;
|
|
u32 debug_level;
|
|
int ant_coupling;
|
|
bool bt_ch_announce;
|
|
int wanted_ucode_alternative;
|
|
bool auto_agg;
|
|
};
|
|
|
|
/**
|
|
* struct iwl_hw_params
|
|
*
|
|
* Holds the module parameters
|
|
*
|
|
* @max_txq_num: Max # Tx queues supported
|
|
* @num_ampdu_queues: num of ampdu queues
|
|
* @tx_chains_num: Number of TX chains
|
|
* @rx_chains_num: Number of RX chains
|
|
* @valid_tx_ant: usable antennas for TX
|
|
* @valid_rx_ant: usable antennas for RX
|
|
* @ht40_channel: is 40MHz width possible: BIT(IEEE80211_BAND_XXX)
|
|
* @sku: sku read from EEPROM
|
|
* @rx_page_order: Rx buffer page order
|
|
* @ct_kill_threshold: temperature threshold - in hw dependent unit
|
|
* @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit
|
|
* relevant for 1000, 6000 and up
|
|
* @wd_timeout: TX queues watchdog timeout
|
|
* @struct iwl_sensitivity_ranges: range of sensitivity values
|
|
*/
|
|
struct iwl_hw_params {
|
|
u8 max_txq_num;
|
|
u8 num_ampdu_queues;
|
|
u8 tx_chains_num;
|
|
u8 rx_chains_num;
|
|
u8 valid_tx_ant;
|
|
u8 valid_rx_ant;
|
|
u8 ht40_channel;
|
|
bool shadow_reg_enable;
|
|
u16 sku;
|
|
u32 rx_page_order;
|
|
u32 ct_kill_threshold;
|
|
u32 ct_kill_exit_threshold;
|
|
unsigned int wd_timeout;
|
|
|
|
const struct iwl_sensitivity_ranges *sens;
|
|
};
|
|
|
|
/**
|
|
* enum iwl_ucode_type
|
|
*
|
|
* The type of ucode currently loaded on the hardware.
|
|
*
|
|
* @IWL_UCODE_NONE: No ucode loaded
|
|
* @IWL_UCODE_REGULAR: Normal runtime ucode
|
|
* @IWL_UCODE_INIT: Initial ucode
|
|
* @IWL_UCODE_WOWLAN: Wake on Wireless enabled ucode
|
|
*/
|
|
enum iwl_ucode_type {
|
|
IWL_UCODE_NONE,
|
|
IWL_UCODE_REGULAR,
|
|
IWL_UCODE_INIT,
|
|
IWL_UCODE_WOWLAN,
|
|
};
|
|
|
|
/**
|
|
* struct iwl_notification_wait - notification wait entry
|
|
* @list: list head for global list
|
|
* @fn: function called with the notification
|
|
* @cmd: command ID
|
|
*
|
|
* This structure is not used directly, to wait for a
|
|
* notification declare it on the stack, and call
|
|
* iwlagn_init_notification_wait() with appropriate
|
|
* parameters. Then do whatever will cause the ucode
|
|
* to notify the driver, and to wait for that then
|
|
* call iwlagn_wait_notification().
|
|
*
|
|
* Each notification is one-shot. If at some point we
|
|
* need to support multi-shot notifications (which
|
|
* can't be allocated on the stack) we need to modify
|
|
* the code for them.
|
|
*/
|
|
struct iwl_notification_wait {
|
|
struct list_head list;
|
|
|
|
void (*fn)(struct iwl_trans *trans, struct iwl_rx_packet *pkt,
|
|
void *data);
|
|
void *fn_data;
|
|
|
|
u8 cmd;
|
|
bool triggered, aborted;
|
|
};
|
|
|
|
/**
|
|
* enum iwl_pa_type - Power Amplifier type
|
|
* @IWL_PA_SYSTEM: based on uCode configuration
|
|
* @IWL_PA_INTERNAL: use Internal only
|
|
*/
|
|
enum iwl_pa_type {
|
|
IWL_PA_SYSTEM = 0,
|
|
IWL_PA_INTERNAL = 1,
|
|
};
|
|
|
|
/*
|
|
* LED mode
|
|
* IWL_LED_DEFAULT: use device default
|
|
* IWL_LED_RF_STATE: turn LED on/off based on RF state
|
|
* LED ON = RF ON
|
|
* LED OFF = RF OFF
|
|
* IWL_LED_BLINK: adjust led blink rate based on blink table
|
|
* IWL_LED_DISABLE: led disabled
|
|
*/
|
|
enum iwl_led_mode {
|
|
IWL_LED_DEFAULT,
|
|
IWL_LED_RF_STATE,
|
|
IWL_LED_BLINK,
|
|
IWL_LED_DISABLE,
|
|
};
|
|
|
|
/**
|
|
* struct iwl_cfg
|
|
* @name: Offical name of the device
|
|
* @fw_name_pre: Firmware filename prefix. The api version and extension
|
|
* (.ucode) will be added to filename before loading from disk. The
|
|
* filename is constructed as fw_name_pre<api>.ucode.
|
|
* @ucode_api_max: Highest version of uCode API supported by driver.
|
|
* @ucode_api_ok: oldest version of the uCode API that is OK to load
|
|
* without a warning, for use in transitions
|
|
* @ucode_api_min: Lowest version of uCode API supported by driver.
|
|
* @max_inst_size: The maximal length of the fw inst section
|
|
* @max_data_size: The maximal length of the fw data section
|
|
* @valid_tx_ant: valid transmit antenna
|
|
* @valid_rx_ant: valid receive antenna
|
|
* @sku: sku information from EEPROM
|
|
* @eeprom_ver: EEPROM version
|
|
* @eeprom_calib_ver: EEPROM calibration version
|
|
* @lib: pointer to the lib ops
|
|
* @additional_nic_config: additional nic configuration
|
|
* @base_params: pointer to basic parameters
|
|
* @ht_params: point to ht patameters
|
|
* @bt_params: pointer to bt parameters
|
|
* @pa_type: used by 6000 series only to identify the type of Power Amplifier
|
|
* @need_temp_offset_calib: need to perform temperature offset calibration
|
|
* @no_xtal_calib: some devices do not need crystal calibration data,
|
|
* don't send it to those
|
|
* @scan_rx_antennas: available antenna for scan operation
|
|
* @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
|
|
* @adv_pm: advance power management
|
|
* @rx_with_siso_diversity: 1x1 device with rx antenna diversity
|
|
* @internal_wimax_coex: internal wifi/wimax combo device
|
|
* @iq_invert: I/Q inversion
|
|
* @temp_offset_v2: support v2 of temperature offset calibration
|
|
*
|
|
* We enable the driver to be backward compatible wrt API version. The
|
|
* driver specifies which APIs it supports (with @ucode_api_max being the
|
|
* highest and @ucode_api_min the lowest). Firmware will only be loaded if
|
|
* it has a supported API version.
|
|
*
|
|
* The ideal usage of this infrastructure is to treat a new ucode API
|
|
* release as a new hardware revision.
|
|
*/
|
|
struct iwl_cfg {
|
|
/* params specific to an individual device within a device family */
|
|
const char *name;
|
|
const char *fw_name_pre;
|
|
const unsigned int ucode_api_max;
|
|
const unsigned int ucode_api_ok;
|
|
const unsigned int ucode_api_min;
|
|
const u32 max_data_size;
|
|
const u32 max_inst_size;
|
|
u8 valid_tx_ant;
|
|
u8 valid_rx_ant;
|
|
u16 sku;
|
|
u16 eeprom_ver;
|
|
u16 eeprom_calib_ver;
|
|
const struct iwl_lib_ops *lib;
|
|
void (*additional_nic_config)(struct iwl_priv *priv);
|
|
/* params not likely to change within a device family */
|
|
struct iwl_base_params *base_params;
|
|
/* params likely to change within a device family */
|
|
struct iwl_ht_params *ht_params;
|
|
struct iwl_bt_params *bt_params;
|
|
enum iwl_pa_type pa_type; /* if used set to IWL_PA_SYSTEM */
|
|
const bool need_temp_offset_calib; /* if used set to true */
|
|
const bool no_xtal_calib;
|
|
u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
|
|
enum iwl_led_mode led_mode;
|
|
const bool adv_pm;
|
|
const bool rx_with_siso_diversity;
|
|
const bool internal_wimax_coex;
|
|
const bool iq_invert;
|
|
const bool temp_offset_v2;
|
|
};
|
|
|
|
/**
|
|
* struct iwl_shared - shared fields for all the layers of the driver
|
|
*
|
|
* @dbg_level_dev: dbg level set per device. Prevails on
|
|
* iwlagn_mod_params.debug_level if set (!= 0)
|
|
* @ucode_owner: IWL_OWNERSHIP_*
|
|
* @cmd_queue: command queue number
|
|
* @status: STATUS_*
|
|
* @wowlan: are we running wowlan uCode
|
|
* @valid_contexts: microcode/device supports multiple contexts
|
|
* @bus: pointer to the bus layer data
|
|
* @cfg: see struct iwl_cfg
|
|
* @priv: pointer to the upper layer data
|
|
* @trans: pointer to the transport layer data
|
|
* @nic: pointer to the nic data
|
|
* @hw_params: see struct iwl_hw_params
|
|
* @lock: protect general shared data
|
|
* @sta_lock: protects the station table.
|
|
* If lock and sta_lock are needed, lock must be acquired first.
|
|
* @mutex:
|
|
* @wait_command_queue: the wait_queue for SYNC host command nad uCode load
|
|
* @eeprom: pointer to the eeprom/OTP image
|
|
* @ucode_type: indicator of loaded ucode image
|
|
* @notif_waits: things waiting for notification
|
|
* @notif_wait_lock: lock protecting notification
|
|
* @notif_waitq: head of notification wait queue
|
|
* @device_pointers: pointers to ucode event tables
|
|
*/
|
|
struct iwl_shared {
|
|
#ifdef CONFIG_IWLWIFI_DEBUG
|
|
u32 dbg_level_dev;
|
|
#endif /* CONFIG_IWLWIFI_DEBUG */
|
|
|
|
#define IWL_OWNERSHIP_DRIVER 0
|
|
#define IWL_OWNERSHIP_TM 1
|
|
u8 ucode_owner;
|
|
u8 cmd_queue;
|
|
unsigned long status;
|
|
bool wowlan;
|
|
u8 valid_contexts;
|
|
|
|
struct iwl_bus *bus;
|
|
struct iwl_cfg *cfg;
|
|
struct iwl_priv *priv;
|
|
struct iwl_trans *trans;
|
|
struct iwl_nic *nic;
|
|
struct iwl_hw_params hw_params;
|
|
|
|
spinlock_t lock;
|
|
spinlock_t sta_lock;
|
|
struct mutex mutex;
|
|
|
|
wait_queue_head_t wait_command_queue;
|
|
|
|
/* eeprom -- this is in the card's little endian byte order */
|
|
u8 *eeprom;
|
|
|
|
/* ucode related variables */
|
|
enum iwl_ucode_type ucode_type;
|
|
|
|
/* notification wait support */
|
|
struct list_head notif_waits;
|
|
spinlock_t notif_wait_lock;
|
|
wait_queue_head_t notif_waitq;
|
|
|
|
struct {
|
|
u32 error_event_table;
|
|
u32 log_event_table;
|
|
} device_pointers;
|
|
|
|
};
|
|
|
|
/*Whatever _m is (iwl_trans, iwl_priv, iwl_bus, these macros will work */
|
|
#define priv(_m) ((_m)->shrd->priv)
|
|
#define cfg(_m) ((_m)->shrd->cfg)
|
|
#define bus(_m) ((_m)->shrd->bus)
|
|
#define nic(_m) ((_m)->shrd->nic)
|
|
#define trans(_m) ((_m)->shrd->trans)
|
|
#define hw_params(_m) ((_m)->shrd->hw_params)
|
|
|
|
#ifdef CONFIG_IWLWIFI_DEBUG
|
|
/*
|
|
* iwl_get_debug_level: Return active debug level for device
|
|
*
|
|
* Using sysfs it is possible to set per device debug level. This debug
|
|
* level will be used if set, otherwise the global debug level which can be
|
|
* set via module parameter is used.
|
|
*/
|
|
static inline u32 iwl_get_debug_level(struct iwl_shared *shrd)
|
|
{
|
|
if (shrd->dbg_level_dev)
|
|
return shrd->dbg_level_dev;
|
|
else
|
|
return iwlagn_mod_params.debug_level;
|
|
}
|
|
#else
|
|
static inline u32 iwl_get_debug_level(struct iwl_shared *shrd)
|
|
{
|
|
return iwlagn_mod_params.debug_level;
|
|
}
|
|
#endif
|
|
|
|
static inline void iwl_free_pages(struct iwl_shared *shrd, unsigned long page)
|
|
{
|
|
free_pages(page, shrd->hw_params.rx_page_order);
|
|
}
|
|
|
|
/**
|
|
* iwl_queue_inc_wrap - increment queue index, wrap back to beginning
|
|
* @index -- current index
|
|
* @n_bd -- total number of entries in queue (must be power of 2)
|
|
*/
|
|
static inline int iwl_queue_inc_wrap(int index, int n_bd)
|
|
{
|
|
return ++index & (n_bd - 1);
|
|
}
|
|
|
|
/**
|
|
* iwl_queue_dec_wrap - decrement queue index, wrap back to end
|
|
* @index -- current index
|
|
* @n_bd -- total number of entries in queue (must be power of 2)
|
|
*/
|
|
static inline int iwl_queue_dec_wrap(int index, int n_bd)
|
|
{
|
|
return --index & (n_bd - 1);
|
|
}
|
|
|
|
struct iwl_rx_mem_buffer {
|
|
dma_addr_t page_dma;
|
|
struct page *page;
|
|
struct list_head list;
|
|
};
|
|
|
|
#define rxb_addr(r) page_address(r->page)
|
|
|
|
/*
|
|
* mac80211 queues, ACs, hardware queues, FIFOs.
|
|
*
|
|
* Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues
|
|
*
|
|
* Mac80211 uses the following numbers, which we get as from it
|
|
* by way of skb_get_queue_mapping(skb):
|
|
*
|
|
* VO 0
|
|
* VI 1
|
|
* BE 2
|
|
* BK 3
|
|
*
|
|
*
|
|
* Regular (not A-MPDU) frames are put into hardware queues corresponding
|
|
* to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their
|
|
* own queue per aggregation session (RA/TID combination), such queues are
|
|
* set up to map into FIFOs too, for which we need an AC->FIFO mapping. In
|
|
* order to map frames to the right queue, we also need an AC->hw queue
|
|
* mapping. This is implemented here.
|
|
*
|
|
* Due to the way hw queues are set up (by the hw specific modules like
|
|
* iwl-4965.c, iwl-5000.c etc.), the AC->hw queue mapping is the identity
|
|
* mapping.
|
|
*/
|
|
|
|
static const u8 tid_to_ac[] = {
|
|
IEEE80211_AC_BE,
|
|
IEEE80211_AC_BK,
|
|
IEEE80211_AC_BK,
|
|
IEEE80211_AC_BE,
|
|
IEEE80211_AC_VI,
|
|
IEEE80211_AC_VI,
|
|
IEEE80211_AC_VO,
|
|
IEEE80211_AC_VO
|
|
};
|
|
|
|
static inline int get_ac_from_tid(u16 tid)
|
|
{
|
|
if (likely(tid < ARRAY_SIZE(tid_to_ac)))
|
|
return tid_to_ac[tid];
|
|
|
|
/* no support for TIDs 8-15 yet */
|
|
return -EINVAL;
|
|
}
|
|
|
|
enum iwl_rxon_context_id {
|
|
IWL_RXON_CTX_BSS,
|
|
IWL_RXON_CTX_PAN,
|
|
|
|
NUM_IWL_RXON_CTX
|
|
};
|
|
|
|
int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
|
|
struct iwl_cfg *cfg);
|
|
void __devexit iwl_remove(struct iwl_priv * priv);
|
|
struct iwl_device_cmd;
|
|
int __must_check iwl_rx_dispatch(struct iwl_priv *priv,
|
|
struct iwl_rx_mem_buffer *rxb,
|
|
struct iwl_device_cmd *cmd);
|
|
|
|
int iwlagn_hw_valid_rtc_data_addr(u32 addr);
|
|
void iwl_set_hw_rfkill_state(struct iwl_priv *priv, bool state);
|
|
void iwl_nic_config(struct iwl_priv *priv);
|
|
void iwl_free_skb(struct iwl_priv *priv, struct sk_buff *skb);
|
|
void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand);
|
|
const char *get_cmd_string(u8 cmd);
|
|
bool iwl_check_for_ct_kill(struct iwl_priv *priv);
|
|
|
|
void iwl_stop_sw_queue(struct iwl_priv *priv, u8 ac);
|
|
void iwl_wake_sw_queue(struct iwl_priv *priv, u8 ac);
|
|
|
|
/* notification wait support */
|
|
void iwl_abort_notification_waits(struct iwl_shared *shrd);
|
|
void __acquires(wait_entry)
|
|
iwl_init_notification_wait(struct iwl_shared *shrd,
|
|
struct iwl_notification_wait *wait_entry,
|
|
u8 cmd,
|
|
void (*fn)(struct iwl_trans *trans,
|
|
struct iwl_rx_packet *pkt,
|
|
void *data),
|
|
void *fn_data);
|
|
int __must_check __releases(wait_entry)
|
|
iwl_wait_notification(struct iwl_shared *shrd,
|
|
struct iwl_notification_wait *wait_entry,
|
|
unsigned long timeout);
|
|
void __releases(wait_entry)
|
|
iwl_remove_notification(struct iwl_shared *shrd,
|
|
struct iwl_notification_wait *wait_entry);
|
|
|
|
#ifdef CONFIG_IWLWIFI_DEBUGFS
|
|
void iwl_reset_traffic_log(struct iwl_priv *priv);
|
|
#endif /* CONFIG_IWLWIFI_DEBUGFS */
|
|
|
|
#ifdef CONFIG_IWLWIFI_DEBUG
|
|
void iwl_print_rx_config_cmd(struct iwl_priv *priv,
|
|
enum iwl_rxon_context_id ctxid);
|
|
#else
|
|
static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv,
|
|
enum iwl_rxon_context_id ctxid)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
#define IWL_CMD(x) case x: return #x
|
|
#define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
|
|
|
|
#define IWL_TRAFFIC_ENTRIES (256)
|
|
#define IWL_TRAFFIC_ENTRY_SIZE (64)
|
|
|
|
/*****************************************************
|
|
* DRIVER STATUS FUNCTIONS
|
|
******************************************************/
|
|
#define STATUS_HCMD_ACTIVE 0 /* host command in progress */
|
|
/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
|
|
#define STATUS_INT_ENABLED 2
|
|
#define STATUS_RF_KILL_HW 3
|
|
#define STATUS_CT_KILL 4
|
|
#define STATUS_INIT 5
|
|
#define STATUS_ALIVE 6
|
|
#define STATUS_READY 7
|
|
#define STATUS_TEMPERATURE 8
|
|
#define STATUS_GEO_CONFIGURED 9
|
|
#define STATUS_EXIT_PENDING 10
|
|
#define STATUS_STATISTICS 12
|
|
#define STATUS_SCANNING 13
|
|
#define STATUS_SCAN_ABORTING 14
|
|
#define STATUS_SCAN_HW 15
|
|
#define STATUS_POWER_PMI 16
|
|
#define STATUS_FW_ERROR 17
|
|
#define STATUS_DEVICE_ENABLED 18
|
|
#define STATUS_CHANNEL_SWITCH_PENDING 19
|
|
#define STATUS_SCAN_COMPLETE 20
|
|
|
|
static inline int iwl_is_ready(struct iwl_shared *shrd)
|
|
{
|
|
/* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
|
|
* set but EXIT_PENDING is not */
|
|
return test_bit(STATUS_READY, &shrd->status) &&
|
|
test_bit(STATUS_GEO_CONFIGURED, &shrd->status) &&
|
|
!test_bit(STATUS_EXIT_PENDING, &shrd->status);
|
|
}
|
|
|
|
static inline int iwl_is_alive(struct iwl_shared *shrd)
|
|
{
|
|
return test_bit(STATUS_ALIVE, &shrd->status);
|
|
}
|
|
|
|
static inline int iwl_is_init(struct iwl_shared *shrd)
|
|
{
|
|
return test_bit(STATUS_INIT, &shrd->status);
|
|
}
|
|
|
|
static inline int iwl_is_rfkill_hw(struct iwl_shared *shrd)
|
|
{
|
|
return test_bit(STATUS_RF_KILL_HW, &shrd->status);
|
|
}
|
|
|
|
static inline int iwl_is_rfkill(struct iwl_shared *shrd)
|
|
{
|
|
return iwl_is_rfkill_hw(shrd);
|
|
}
|
|
|
|
static inline int iwl_is_ctkill(struct iwl_shared *shrd)
|
|
{
|
|
return test_bit(STATUS_CT_KILL, &shrd->status);
|
|
}
|
|
|
|
static inline int iwl_is_ready_rf(struct iwl_shared *shrd)
|
|
{
|
|
if (iwl_is_rfkill(shrd))
|
|
return 0;
|
|
|
|
return iwl_is_ready(shrd);
|
|
}
|
|
|
|
#endif /* #__iwl_shared_h__ */
|