openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/i2c/busses/i2c-davinci.c

992 lines
26 KiB
C
Raw Blame History

/*
* TI DAVINCI I2C adapter driver.
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
*
* Updated by Vinod & Sudhakar Feb 2005
*
* ----------------------------------------------------------------------------
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* ----------------------------------------------------------------------------
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/clk.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/cpufreq.h>
#include <linux/gpio/consumer.h>
#include <linux/of_device.h>
#include <linux/platform_data/i2c-davinci.h>
#include <linux/pm_runtime.h>
/* ----- global defines ----------------------------------------------- */
#define DAVINCI_I2C_TIMEOUT (1*HZ)
#define DAVINCI_I2C_MAX_TRIES 2
#define DAVINCI_I2C_OWN_ADDRESS 0x08
#define I2C_DAVINCI_INTR_ALL (DAVINCI_I2C_IMR_SCD | \
DAVINCI_I2C_IMR_ARDY | \
DAVINCI_I2C_IMR_NACK | \
DAVINCI_I2C_IMR_AL)
#define DAVINCI_I2C_OAR_REG 0x00
#define DAVINCI_I2C_IMR_REG 0x04
#define DAVINCI_I2C_STR_REG 0x08
#define DAVINCI_I2C_CLKL_REG 0x0c
#define DAVINCI_I2C_CLKH_REG 0x10
#define DAVINCI_I2C_CNT_REG 0x14
#define DAVINCI_I2C_DRR_REG 0x18
#define DAVINCI_I2C_SAR_REG 0x1c
#define DAVINCI_I2C_DXR_REG 0x20
#define DAVINCI_I2C_MDR_REG 0x24
#define DAVINCI_I2C_IVR_REG 0x28
#define DAVINCI_I2C_EMDR_REG 0x2c
#define DAVINCI_I2C_PSC_REG 0x30
#define DAVINCI_I2C_FUNC_REG 0x48
#define DAVINCI_I2C_DIR_REG 0x4c
#define DAVINCI_I2C_DIN_REG 0x50
#define DAVINCI_I2C_DOUT_REG 0x54
#define DAVINCI_I2C_DSET_REG 0x58
#define DAVINCI_I2C_DCLR_REG 0x5c
#define DAVINCI_I2C_IVR_AAS 0x07
#define DAVINCI_I2C_IVR_SCD 0x06
#define DAVINCI_I2C_IVR_XRDY 0x05
#define DAVINCI_I2C_IVR_RDR 0x04
#define DAVINCI_I2C_IVR_ARDY 0x03
#define DAVINCI_I2C_IVR_NACK 0x02
#define DAVINCI_I2C_IVR_AL 0x01
#define DAVINCI_I2C_STR_BB BIT(12)
#define DAVINCI_I2C_STR_RSFULL BIT(11)
#define DAVINCI_I2C_STR_SCD BIT(5)
#define DAVINCI_I2C_STR_ARDY BIT(2)
#define DAVINCI_I2C_STR_NACK BIT(1)
#define DAVINCI_I2C_STR_AL BIT(0)
#define DAVINCI_I2C_MDR_NACK BIT(15)
#define DAVINCI_I2C_MDR_STT BIT(13)
#define DAVINCI_I2C_MDR_STP BIT(11)
#define DAVINCI_I2C_MDR_MST BIT(10)
#define DAVINCI_I2C_MDR_TRX BIT(9)
#define DAVINCI_I2C_MDR_XA BIT(8)
#define DAVINCI_I2C_MDR_RM BIT(7)
#define DAVINCI_I2C_MDR_IRS BIT(5)
#define DAVINCI_I2C_IMR_AAS BIT(6)
#define DAVINCI_I2C_IMR_SCD BIT(5)
#define DAVINCI_I2C_IMR_XRDY BIT(4)
#define DAVINCI_I2C_IMR_RRDY BIT(3)
#define DAVINCI_I2C_IMR_ARDY BIT(2)
#define DAVINCI_I2C_IMR_NACK BIT(1)
#define DAVINCI_I2C_IMR_AL BIT(0)
/* set SDA and SCL as GPIO */
#define DAVINCI_I2C_FUNC_PFUNC0 BIT(0)
/* set SCL as output when used as GPIO*/
#define DAVINCI_I2C_DIR_PDIR0 BIT(0)
/* set SDA as output when used as GPIO*/
#define DAVINCI_I2C_DIR_PDIR1 BIT(1)
/* read SCL GPIO level */
#define DAVINCI_I2C_DIN_PDIN0 BIT(0)
/* read SDA GPIO level */
#define DAVINCI_I2C_DIN_PDIN1 BIT(1)
/*set the SCL GPIO high */
#define DAVINCI_I2C_DSET_PDSET0 BIT(0)
/*set the SDA GPIO high */
#define DAVINCI_I2C_DSET_PDSET1 BIT(1)
/* set the SCL GPIO low */
#define DAVINCI_I2C_DCLR_PDCLR0 BIT(0)
/* set the SDA GPIO low */
#define DAVINCI_I2C_DCLR_PDCLR1 BIT(1)
/* timeout for pm runtime autosuspend */
#define DAVINCI_I2C_PM_TIMEOUT 1000 /* ms */
struct davinci_i2c_dev {
struct device *dev;
void __iomem *base;
struct completion cmd_complete;
struct clk *clk;
int cmd_err;
u8 *buf;
size_t buf_len;
int irq;
int stop;
u8 terminate;
struct i2c_adapter adapter;
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
#endif
struct davinci_i2c_platform_data *pdata;
};
/* default platform data to use if not supplied in the platform_device */
static struct davinci_i2c_platform_data davinci_i2c_platform_data_default = {
.bus_freq = 100,
.bus_delay = 0,
};
static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev,
int reg, u16 val)
{
writew_relaxed(val, i2c_dev->base + reg);
}
static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
{
return readw_relaxed(i2c_dev->base + reg);
}
static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev,
int val)
{
u16 w;
w = davinci_i2c_read_reg(i2c_dev, DAVINCI_I2C_MDR_REG);
if (!val) /* put I2C into reset */
w &= ~DAVINCI_I2C_MDR_IRS;
else /* take I2C out of reset */
w |= DAVINCI_I2C_MDR_IRS;
davinci_i2c_write_reg(i2c_dev, DAVINCI_I2C_MDR_REG, w);
}
static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
{
struct davinci_i2c_platform_data *pdata = dev->pdata;
u16 psc;
u32 clk;
u32 d;
u32 clkh;
u32 clkl;
u32 input_clock = clk_get_rate(dev->clk);
struct device_node *of_node = dev->dev->of_node;
/* NOTE: I2C Clock divider programming info
* As per I2C specs the following formulas provide prescaler
* and low/high divider values
* input clk --> PSC Div -----------> ICCL/H Div --> output clock
* module clk
*
* output clk = module clk / (PSC + 1) [ (ICCL + d) + (ICCH + d) ]
*
* Thus,
* (ICCL + ICCH) = clk = (input clk / ((psc +1) * output clk)) - 2d;
*
* where if PSC == 0, d = 7,
* if PSC == 1, d = 6
* if PSC > 1 , d = 5
*
* Note:
* d is always 6 on Keystone I2C controller
*/
/*
* Both Davinci and current Keystone User Guides recommend a value
* between 7MHz and 12MHz. In reality 7MHz module clock doesn't
* always produce enough margin between SDA and SCL transitions.
* Measurements show that the higher the module clock is, the
* bigger is the margin, providing more reliable communication.
* So we better target for 12MHz.
*/
psc = (input_clock / 12000000) - 1;
if ((input_clock / (psc + 1)) > 12000000)
psc++; /* better to run under spec than over */
d = (psc >= 2) ? 5 : 7 - psc;
if (of_node && of_device_is_compatible(of_node, "ti,keystone-i2c"))
d = 6;
clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000));
/* Avoid driving the bus too fast because of rounding errors above */
if (input_clock / (psc + 1) / clk > pdata->bus_freq * 1000)
clk++;
/*
* According to I2C-BUS Spec 2.1, in FAST-MODE LOW period should be at
* least 1.3uS, which is not the case with 50% duty cycle. Driving HIGH
* to LOW ratio as 1 to 2 is more safe.
*/
if (pdata->bus_freq > 100)
clkl = (clk << 1) / 3;
else
clkl = (clk >> 1);
/*
* It's not always possible to have 1 to 2 ratio when d=7, so fall back
* to minimal possible clkh in this case.
*
* Note:
* CLKH is not allowed to be 0, in this case I2C clock is not generated
* at all
*/
if (clk > clkl + d) {
clkh = clk - clkl - d;
clkl -= d;
} else {
clkh = 1;
clkl = clk - (d << 1);
}
davinci_i2c_write_reg(dev, DAVINCI_I2C_PSC_REG, psc);
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
}
/*
* This function configures I2C and brings I2C out of reset.
* This function is called during I2C init function. This function
* also gets called if I2C encounters any errors.
*/
static int i2c_davinci_init(struct davinci_i2c_dev *dev)
{
struct davinci_i2c_platform_data *pdata = dev->pdata;
/* put I2C into reset */
davinci_i2c_reset_ctrl(dev, 0);
/* compute clock dividers */
i2c_davinci_calc_clk_dividers(dev);
/* Respond at reserved "SMBus Host" slave address" (and zero);
* we seem to have no option to not respond...
*/
davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, DAVINCI_I2C_OWN_ADDRESS);
dev_dbg(dev->dev, "PSC = %d\n",
davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
dev_dbg(dev->dev, "CLKL = %d\n",
davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG));
dev_dbg(dev->dev, "CLKH = %d\n",
davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG));
dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n",
pdata->bus_freq, pdata->bus_delay);
/* Take the I2C module out of reset: */
davinci_i2c_reset_ctrl(dev, 1);
/* Enable interrupts */
davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, I2C_DAVINCI_INTR_ALL);
return 0;
}
/*
* This routine does i2c bus recovery by using i2c_generic_scl_recovery
* which is provided by I2C Bus recovery infrastructure.
*/
static void davinci_i2c_prepare_recovery(struct i2c_adapter *adap)
{
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
/* Disable interrupts */
davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, 0);
/* put I2C into reset */
davinci_i2c_reset_ctrl(dev, 0);
}
static void davinci_i2c_unprepare_recovery(struct i2c_adapter *adap)
{
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
i2c_davinci_init(dev);
}
static struct i2c_bus_recovery_info davinci_i2c_gpio_recovery_info = {
.recover_bus = i2c_generic_scl_recovery,
.prepare_recovery = davinci_i2c_prepare_recovery,
.unprepare_recovery = davinci_i2c_unprepare_recovery,
};
static void davinci_i2c_set_scl(struct i2c_adapter *adap, int val)
{
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
if (val)
davinci_i2c_write_reg(dev, DAVINCI_I2C_DSET_REG,
DAVINCI_I2C_DSET_PDSET0);
else
davinci_i2c_write_reg(dev, DAVINCI_I2C_DCLR_REG,
DAVINCI_I2C_DCLR_PDCLR0);
}
static int davinci_i2c_get_scl(struct i2c_adapter *adap)
{
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
int val;
/* read the state of SCL */
val = davinci_i2c_read_reg(dev, DAVINCI_I2C_DIN_REG);
return val & DAVINCI_I2C_DIN_PDIN0;
}
static int davinci_i2c_get_sda(struct i2c_adapter *adap)
{
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
int val;
/* read the state of SDA */
val = davinci_i2c_read_reg(dev, DAVINCI_I2C_DIN_REG);
return val & DAVINCI_I2C_DIN_PDIN1;
}
static void davinci_i2c_scl_prepare_recovery(struct i2c_adapter *adap)
{
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
davinci_i2c_prepare_recovery(adap);
/* SCL output, SDA input */
davinci_i2c_write_reg(dev, DAVINCI_I2C_DIR_REG, DAVINCI_I2C_DIR_PDIR0);
/* change to GPIO mode */
davinci_i2c_write_reg(dev, DAVINCI_I2C_FUNC_REG,
DAVINCI_I2C_FUNC_PFUNC0);
}
static void davinci_i2c_scl_unprepare_recovery(struct i2c_adapter *adap)
{
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
/* change back to I2C mode */
davinci_i2c_write_reg(dev, DAVINCI_I2C_FUNC_REG, 0);
davinci_i2c_unprepare_recovery(adap);
}
static struct i2c_bus_recovery_info davinci_i2c_scl_recovery_info = {
.recover_bus = i2c_generic_scl_recovery,
.set_scl = davinci_i2c_set_scl,
.get_scl = davinci_i2c_get_scl,
.get_sda = davinci_i2c_get_sda,
.prepare_recovery = davinci_i2c_scl_prepare_recovery,
.unprepare_recovery = davinci_i2c_scl_unprepare_recovery,
};
/*
* Waiting for bus not busy
*/
static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev)
{
unsigned long timeout = jiffies + dev->adapter.timeout;
do {
if (!(davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG) & DAVINCI_I2C_STR_BB))
return 0;
schedule_timeout_uninterruptible(1);
} while (time_before_eq(jiffies, timeout));
dev_warn(dev->dev, "timeout waiting for bus ready\n");
i2c_recover_bus(&dev->adapter);
/*
* if bus is still "busy" here, it's most probably a HW problem like
* short-circuit
*/
if (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG) & DAVINCI_I2C_STR_BB)
return -EIO;
return 0;
}
/*
* Low level master read/write transaction. This function is called
* from i2c_davinci_xfer.
*/
static int
i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
{
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
struct davinci_i2c_platform_data *pdata = dev->pdata;
u32 flag;
u16 w;
unsigned long time_left;
if (msg->addr == DAVINCI_I2C_OWN_ADDRESS) {
dev_warn(dev->dev, "transfer to own address aborted\n");
return -EADDRNOTAVAIL;
}
/* Introduce a delay, required for some boards (e.g Davinci EVM) */
if (pdata->bus_delay)
udelay(pdata->bus_delay);
/* set the slave address */
davinci_i2c_write_reg(dev, DAVINCI_I2C_SAR_REG, msg->addr);
dev->buf = msg->buf;
dev->buf_len = msg->len;
dev->stop = stop;
davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len);
reinit_completion(&dev->cmd_complete);
dev->cmd_err = 0;
/* Take I2C out of reset and configure it as master */
flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST;
/* if the slave address is ten bit address, enable XA bit */
if (msg->flags & I2C_M_TEN)
flag |= DAVINCI_I2C_MDR_XA;
if (!(msg->flags & I2C_M_RD))
flag |= DAVINCI_I2C_MDR_TRX;
if (msg->len == 0)
flag |= DAVINCI_I2C_MDR_RM;
/* Enable receive or transmit interrupts */
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
if (msg->flags & I2C_M_RD)
w |= DAVINCI_I2C_IMR_RRDY;
else
w |= DAVINCI_I2C_IMR_XRDY;
davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w);
dev->terminate = 0;
/*
* Write mode register first as needed for correct behaviour
* on OMAP-L138, but don't set STT yet to avoid a race with XRDY
* occurring before we have loaded DXR
*/
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
/*
* First byte should be set here, not after interrupt,
* because transmit-data-ready interrupt can come before
* NACK-interrupt during sending of previous message and
* ICDXR may have wrong data
* It also saves us one interrupt, slightly faster
*/
if ((!(msg->flags & I2C_M_RD)) && dev->buf_len) {
davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, *dev->buf++);
dev->buf_len--;
}
/* Set STT to begin transmit now DXR is loaded */
flag |= DAVINCI_I2C_MDR_STT;
if (stop && msg->len != 0)
flag |= DAVINCI_I2C_MDR_STP;
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
time_left = wait_for_completion_timeout(&dev->cmd_complete,
dev->adapter.timeout);
if (!time_left) {
dev_err(dev->dev, "controller timed out\n");
i2c_recover_bus(adap);
dev->buf_len = 0;
return -ETIMEDOUT;
}
if (dev->buf_len) {
/* This should be 0 if all bytes were transferred
* or dev->cmd_err denotes an error.
*/
dev_err(dev->dev, "abnormal termination buf_len=%zu\n",
dev->buf_len);
dev->terminate = 1;
wmb();
dev->buf_len = 0;
return -EREMOTEIO;
}
/* no error */
if (likely(!dev->cmd_err))
return msg->len;
/* We have an error */
if (dev->cmd_err & DAVINCI_I2C_STR_AL) {
i2c_davinci_init(dev);
return -EIO;
}
if (dev->cmd_err & DAVINCI_I2C_STR_NACK) {
if (msg->flags & I2C_M_IGNORE_NAK)
return msg->len;
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
w |= DAVINCI_I2C_MDR_STP;
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
return -EREMOTEIO;
}
return -EIO;
}
/*
* Prepare controller for a transaction and call i2c_davinci_xfer_msg
*/
static int
i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
struct davinci_i2c_dev *dev = i2c_get_adapdata(adap);
int i;
int ret;
dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
ret = pm_runtime_get_sync(dev->dev);
if (ret < 0) {
dev_err(dev->dev, "Failed to runtime_get device: %d\n", ret);
pm_runtime_put_noidle(dev->dev);
return ret;
}
ret = i2c_davinci_wait_bus_not_busy(dev);
if (ret < 0) {
dev_warn(dev->dev, "timeout waiting for bus ready\n");
goto out;
}
for (i = 0; i < num; i++) {
ret = i2c_davinci_xfer_msg(adap, &msgs[i], (i == (num - 1)));
dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num,
ret);
if (ret < 0)
goto out;
}
ret = num;
out:
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
return ret;
}
static u32 i2c_davinci_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
static void terminate_read(struct davinci_i2c_dev *dev)
{
u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
w |= DAVINCI_I2C_MDR_NACK;
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
/* Throw away data */
davinci_i2c_read_reg(dev, DAVINCI_I2C_DRR_REG);
if (!dev->terminate)
dev_err(dev->dev, "RDR IRQ while no data requested\n");
}
static void terminate_write(struct davinci_i2c_dev *dev)
{
u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
w |= DAVINCI_I2C_MDR_RM | DAVINCI_I2C_MDR_STP;
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
if (!dev->terminate)
dev_dbg(dev->dev, "TDR IRQ while no data to send\n");
}
/*
* Interrupt service routine. This gets called whenever an I2C interrupt
* occurs.
*/
static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
{
struct davinci_i2c_dev *dev = dev_id;
u32 stat;
int count = 0;
u16 w;
if (pm_runtime_suspended(dev->dev))
return IRQ_NONE;
while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) {
dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
if (count++ == 100) {
dev_warn(dev->dev, "Too much work in one IRQ\n");
break;
}
switch (stat) {
case DAVINCI_I2C_IVR_AL:
/* Arbitration lost, must retry */
dev->cmd_err |= DAVINCI_I2C_STR_AL;
dev->buf_len = 0;
complete(&dev->cmd_complete);
break;
case DAVINCI_I2C_IVR_NACK:
dev->cmd_err |= DAVINCI_I2C_STR_NACK;
dev->buf_len = 0;
complete(&dev->cmd_complete);
break;
case DAVINCI_I2C_IVR_ARDY:
davinci_i2c_write_reg(dev,
DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY);
if (((dev->buf_len == 0) && (dev->stop != 0)) ||
(dev->cmd_err & DAVINCI_I2C_STR_NACK)) {
w = davinci_i2c_read_reg(dev,
DAVINCI_I2C_MDR_REG);
w |= DAVINCI_I2C_MDR_STP;
davinci_i2c_write_reg(dev,
DAVINCI_I2C_MDR_REG, w);
}
complete(&dev->cmd_complete);
break;
case DAVINCI_I2C_IVR_RDR:
if (dev->buf_len) {
*dev->buf++ =
davinci_i2c_read_reg(dev,
DAVINCI_I2C_DRR_REG);
dev->buf_len--;
if (dev->buf_len)
continue;
davinci_i2c_write_reg(dev,
DAVINCI_I2C_STR_REG,
DAVINCI_I2C_IMR_RRDY);
} else {
/* signal can terminate transfer */
terminate_read(dev);
}
break;
case DAVINCI_I2C_IVR_XRDY:
if (dev->buf_len) {
davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG,
*dev->buf++);
dev->buf_len--;
if (dev->buf_len)
continue;
w = davinci_i2c_read_reg(dev,
DAVINCI_I2C_IMR_REG);
w &= ~DAVINCI_I2C_IMR_XRDY;
davinci_i2c_write_reg(dev,
DAVINCI_I2C_IMR_REG,
w);
} else {
/* signal can terminate transfer */
terminate_write(dev);
}
break;
case DAVINCI_I2C_IVR_SCD:
davinci_i2c_write_reg(dev,
DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_SCD);
complete(&dev->cmd_complete);
break;
case DAVINCI_I2C_IVR_AAS:
dev_dbg(dev->dev, "Address as slave interrupt\n");
break;
default:
dev_warn(dev->dev, "Unrecognized irq stat %d\n", stat);
break;
}
}
return count ? IRQ_HANDLED : IRQ_NONE;
}
#ifdef CONFIG_CPU_FREQ
static int i2c_davinci_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
{
struct davinci_i2c_dev *dev;
dev = container_of(nb, struct davinci_i2c_dev, freq_transition);
i2c_lock_bus(&dev->adapter, I2C_LOCK_ROOT_ADAPTER);
if (val == CPUFREQ_PRECHANGE) {
davinci_i2c_reset_ctrl(dev, 0);
} else if (val == CPUFREQ_POSTCHANGE) {
i2c_davinci_calc_clk_dividers(dev);
davinci_i2c_reset_ctrl(dev, 1);
}
i2c_unlock_bus(&dev->adapter, I2C_LOCK_ROOT_ADAPTER);
return 0;
}
static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev)
{
dev->freq_transition.notifier_call = i2c_davinci_cpufreq_transition;
return cpufreq_register_notifier(&dev->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
}
static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
{
cpufreq_unregister_notifier(&dev->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
}
#else
static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev)
{
return 0;
}
static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev)
{
}
#endif
static const struct i2c_algorithm i2c_davinci_algo = {
.master_xfer = i2c_davinci_xfer,
.functionality = i2c_davinci_func,
};
static const struct of_device_id davinci_i2c_of_match[] = {
{.compatible = "ti,davinci-i2c", },
{.compatible = "ti,keystone-i2c", },
{},
};
MODULE_DEVICE_TABLE(of, davinci_i2c_of_match);
static int davinci_i2c_probe(struct platform_device *pdev)
{
struct davinci_i2c_dev *dev;
struct i2c_adapter *adap;
struct resource *mem;
struct i2c_bus_recovery_info *rinfo;
int r, irq;
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
if (!irq)
irq = -ENXIO;
if (irq != -EPROBE_DEFER)
dev_err(&pdev->dev,
"can't get irq resource ret=%d\n", irq);
return irq;
}
dev = devm_kzalloc(&pdev->dev, sizeof(struct davinci_i2c_dev),
GFP_KERNEL);
if (!dev) {
dev_err(&pdev->dev, "Memory allocation failed\n");
return -ENOMEM;
}
init_completion(&dev->cmd_complete);
dev->dev = &pdev->dev;
dev->irq = irq;
dev->pdata = dev_get_platdata(&pdev->dev);
platform_set_drvdata(pdev, dev);
if (!dev->pdata && pdev->dev.of_node) {
u32 prop;
dev->pdata = devm_kzalloc(&pdev->dev,
sizeof(struct davinci_i2c_platform_data), GFP_KERNEL);
if (!dev->pdata)
return -ENOMEM;
memcpy(dev->pdata, &davinci_i2c_platform_data_default,
sizeof(struct davinci_i2c_platform_data));
if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&prop))
dev->pdata->bus_freq = prop / 1000;
dev->pdata->has_pfunc =
of_property_read_bool(pdev->dev.of_node,
"ti,has-pfunc");
} else if (!dev->pdata) {
dev->pdata = &davinci_i2c_platform_data_default;
}
dev->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk))
return PTR_ERR(dev->clk);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev->base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(dev->base)) {
return PTR_ERR(dev->base);
}
pm_runtime_set_autosuspend_delay(dev->dev,
DAVINCI_I2C_PM_TIMEOUT);
pm_runtime_use_autosuspend(dev->dev);
pm_runtime_enable(dev->dev);
r = pm_runtime_get_sync(dev->dev);
if (r < 0) {
dev_err(dev->dev, "failed to runtime_get device: %d\n", r);
pm_runtime_put_noidle(dev->dev);
return r;
}
i2c_davinci_init(dev);
r = devm_request_irq(&pdev->dev, dev->irq, i2c_davinci_isr, 0,
pdev->name, dev);
if (r) {
dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
goto err_unuse_clocks;
}
r = i2c_davinci_cpufreq_register(dev);
if (r) {
dev_err(&pdev->dev, "failed to register cpufreq\n");
goto err_unuse_clocks;
}
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_DEPRECATED;
strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name));
adap->algo = &i2c_davinci_algo;
adap->dev.parent = &pdev->dev;
adap->timeout = DAVINCI_I2C_TIMEOUT;
adap->dev.of_node = pdev->dev.of_node;
if (dev->pdata->has_pfunc)
adap->bus_recovery_info = &davinci_i2c_scl_recovery_info;
else if (dev->pdata->gpio_recovery) {
rinfo = &davinci_i2c_gpio_recovery_info;
adap->bus_recovery_info = rinfo;
rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
GPIOD_OUT_HIGH_OPEN_DRAIN);
if (IS_ERR(rinfo->scl_gpiod)) {
r = PTR_ERR(rinfo->scl_gpiod);
goto err_unuse_clocks;
}
rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
if (IS_ERR(rinfo->sda_gpiod)) {
r = PTR_ERR(rinfo->sda_gpiod);
goto err_unuse_clocks;
}
}
adap->nr = pdev->id;
r = i2c_add_numbered_adapter(adap);
if (r)
goto err_unuse_clocks;
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
return 0;
err_unuse_clocks:
pm_runtime_dont_use_autosuspend(dev->dev);
pm_runtime_put_sync(dev->dev);
pm_runtime_disable(dev->dev);
return r;
}
static int davinci_i2c_remove(struct platform_device *pdev)
{
struct davinci_i2c_dev *dev = platform_get_drvdata(pdev);
int ret;
i2c_davinci_cpufreq_deregister(dev);
i2c_del_adapter(&dev->adapter);
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0) {
pm_runtime_put_noidle(&pdev->dev);
return ret;
}
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0);
pm_runtime_dont_use_autosuspend(dev->dev);
pm_runtime_put_sync(dev->dev);
pm_runtime_disable(dev->dev);
return 0;
}
#ifdef CONFIG_PM
static int davinci_i2c_suspend(struct device *dev)
{
struct davinci_i2c_dev *i2c_dev = dev_get_drvdata(dev);
/* put I2C into reset */
davinci_i2c_reset_ctrl(i2c_dev, 0);
return 0;
}
static int davinci_i2c_resume(struct device *dev)
{
struct davinci_i2c_dev *i2c_dev = dev_get_drvdata(dev);
/* take I2C out of reset */
davinci_i2c_reset_ctrl(i2c_dev, 1);
return 0;
}
static const struct dev_pm_ops davinci_i2c_pm = {
.suspend = davinci_i2c_suspend,
.resume = davinci_i2c_resume,
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume)
};
#define davinci_i2c_pm_ops (&davinci_i2c_pm)
#else
#define davinci_i2c_pm_ops NULL
#endif
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:i2c_davinci");
static struct platform_driver davinci_i2c_driver = {
.probe = davinci_i2c_probe,
.remove = davinci_i2c_remove,
.driver = {
.name = "i2c_davinci",
.pm = davinci_i2c_pm_ops,
.of_match_table = davinci_i2c_of_match,
},
};
/* I2C may be needed to bring up other drivers */
static int __init davinci_i2c_init_driver(void)
{
return platform_driver_register(&davinci_i2c_driver);
}
subsys_initcall(davinci_i2c_init_driver);
static void __exit davinci_i2c_exit_driver(void)
{
platform_driver_unregister(&davinci_i2c_driver);
}
module_exit(davinci_i2c_exit_driver);
MODULE_AUTHOR("Texas Instruments India");
MODULE_DESCRIPTION("TI DaVinci I2C bus adapter");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink