mirror of https://gitee.com/openkylin/linux.git
539 lines
13 KiB
C
539 lines
13 KiB
C
/*
|
|
* Ethernet driver for the Atmel AT91RM9200 (Thunder)
|
|
*
|
|
* Copyright (C) 2003 SAN People (Pty) Ltd
|
|
*
|
|
* Based on an earlier Atmel EMAC macrocell driver by Atmel and Lineo Inc.
|
|
* Initial version by Rick Bronson 01/11/2003
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/platform_data/macb.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
|
|
#include "macb.h"
|
|
|
|
/* 1518 rounded up */
|
|
#define MAX_RBUFF_SZ 0x600
|
|
/* max number of receive buffers */
|
|
#define MAX_RX_DESCR 9
|
|
|
|
/* Initialize and start the Receiver and Transmit subsystems */
|
|
static int at91ether_start(struct net_device *dev)
|
|
{
|
|
struct macb *lp = netdev_priv(dev);
|
|
dma_addr_t addr;
|
|
u32 ctl;
|
|
int i;
|
|
|
|
lp->rx_ring = dma_alloc_coherent(&lp->pdev->dev,
|
|
MAX_RX_DESCR * sizeof(struct macb_dma_desc),
|
|
&lp->rx_ring_dma, GFP_KERNEL);
|
|
if (!lp->rx_ring) {
|
|
netdev_err(dev, "unable to alloc rx ring DMA buffer\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
lp->rx_buffers = dma_alloc_coherent(&lp->pdev->dev,
|
|
MAX_RX_DESCR * MAX_RBUFF_SZ,
|
|
&lp->rx_buffers_dma, GFP_KERNEL);
|
|
if (!lp->rx_buffers) {
|
|
netdev_err(dev, "unable to alloc rx data DMA buffer\n");
|
|
|
|
dma_free_coherent(&lp->pdev->dev,
|
|
MAX_RX_DESCR * sizeof(struct macb_dma_desc),
|
|
lp->rx_ring, lp->rx_ring_dma);
|
|
lp->rx_ring = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
addr = lp->rx_buffers_dma;
|
|
for (i = 0; i < MAX_RX_DESCR; i++) {
|
|
lp->rx_ring[i].addr = addr;
|
|
lp->rx_ring[i].ctrl = 0;
|
|
addr += MAX_RBUFF_SZ;
|
|
}
|
|
|
|
/* Set the Wrap bit on the last descriptor */
|
|
lp->rx_ring[MAX_RX_DESCR - 1].addr |= MACB_BIT(RX_WRAP);
|
|
|
|
/* Reset buffer index */
|
|
lp->rx_tail = 0;
|
|
|
|
/* Program address of descriptor list in Rx Buffer Queue register */
|
|
macb_writel(lp, RBQP, lp->rx_ring_dma);
|
|
|
|
/* Enable Receive and Transmit */
|
|
ctl = macb_readl(lp, NCR);
|
|
macb_writel(lp, NCR, ctl | MACB_BIT(RE) | MACB_BIT(TE));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Open the ethernet interface */
|
|
static int at91ether_open(struct net_device *dev)
|
|
{
|
|
struct macb *lp = netdev_priv(dev);
|
|
u32 ctl;
|
|
int ret;
|
|
|
|
/* Clear internal statistics */
|
|
ctl = macb_readl(lp, NCR);
|
|
macb_writel(lp, NCR, ctl | MACB_BIT(CLRSTAT));
|
|
|
|
macb_set_hwaddr(lp);
|
|
|
|
ret = at91ether_start(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable MAC interrupts */
|
|
macb_writel(lp, IER, MACB_BIT(RCOMP) |
|
|
MACB_BIT(RXUBR) |
|
|
MACB_BIT(ISR_TUND) |
|
|
MACB_BIT(ISR_RLE) |
|
|
MACB_BIT(TCOMP) |
|
|
MACB_BIT(ISR_ROVR) |
|
|
MACB_BIT(HRESP));
|
|
|
|
/* schedule a link state check */
|
|
phy_start(lp->phy_dev);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Close the interface */
|
|
static int at91ether_close(struct net_device *dev)
|
|
{
|
|
struct macb *lp = netdev_priv(dev);
|
|
u32 ctl;
|
|
|
|
/* Disable Receiver and Transmitter */
|
|
ctl = macb_readl(lp, NCR);
|
|
macb_writel(lp, NCR, ctl & ~(MACB_BIT(TE) | MACB_BIT(RE)));
|
|
|
|
/* Disable MAC interrupts */
|
|
macb_writel(lp, IDR, MACB_BIT(RCOMP) |
|
|
MACB_BIT(RXUBR) |
|
|
MACB_BIT(ISR_TUND) |
|
|
MACB_BIT(ISR_RLE) |
|
|
MACB_BIT(TCOMP) |
|
|
MACB_BIT(ISR_ROVR) |
|
|
MACB_BIT(HRESP));
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
dma_free_coherent(&lp->pdev->dev,
|
|
MAX_RX_DESCR * sizeof(struct macb_dma_desc),
|
|
lp->rx_ring, lp->rx_ring_dma);
|
|
lp->rx_ring = NULL;
|
|
|
|
dma_free_coherent(&lp->pdev->dev,
|
|
MAX_RX_DESCR * MAX_RBUFF_SZ,
|
|
lp->rx_buffers, lp->rx_buffers_dma);
|
|
lp->rx_buffers = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Transmit packet */
|
|
static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct macb *lp = netdev_priv(dev);
|
|
|
|
if (macb_readl(lp, TSR) & MACB_BIT(RM9200_BNQ)) {
|
|
netif_stop_queue(dev);
|
|
|
|
/* Store packet information (to free when Tx completed) */
|
|
lp->skb = skb;
|
|
lp->skb_length = skb->len;
|
|
lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len,
|
|
DMA_TO_DEVICE);
|
|
|
|
/* Set address of the data in the Transmit Address register */
|
|
macb_writel(lp, TAR, lp->skb_physaddr);
|
|
/* Set length of the packet in the Transmit Control register */
|
|
macb_writel(lp, TCR, skb->len);
|
|
|
|
} else {
|
|
netdev_err(dev, "%s called, but device is busy!\n", __func__);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* Extract received frame from buffer descriptors and sent to upper layers.
|
|
* (Called from interrupt context)
|
|
*/
|
|
static void at91ether_rx(struct net_device *dev)
|
|
{
|
|
struct macb *lp = netdev_priv(dev);
|
|
unsigned char *p_recv;
|
|
struct sk_buff *skb;
|
|
unsigned int pktlen;
|
|
|
|
while (lp->rx_ring[lp->rx_tail].addr & MACB_BIT(RX_USED)) {
|
|
p_recv = lp->rx_buffers + lp->rx_tail * MAX_RBUFF_SZ;
|
|
pktlen = MACB_BF(RX_FRMLEN, lp->rx_ring[lp->rx_tail].ctrl);
|
|
skb = netdev_alloc_skb(dev, pktlen + 2);
|
|
if (skb) {
|
|
skb_reserve(skb, 2);
|
|
memcpy(skb_put(skb, pktlen), p_recv, pktlen);
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
lp->stats.rx_packets++;
|
|
lp->stats.rx_bytes += pktlen;
|
|
netif_rx(skb);
|
|
} else {
|
|
lp->stats.rx_dropped++;
|
|
netdev_notice(dev, "Memory squeeze, dropping packet.\n");
|
|
}
|
|
|
|
if (lp->rx_ring[lp->rx_tail].ctrl & MACB_BIT(RX_MHASH_MATCH))
|
|
lp->stats.multicast++;
|
|
|
|
/* reset ownership bit */
|
|
lp->rx_ring[lp->rx_tail].addr &= ~MACB_BIT(RX_USED);
|
|
|
|
/* wrap after last buffer */
|
|
if (lp->rx_tail == MAX_RX_DESCR - 1)
|
|
lp->rx_tail = 0;
|
|
else
|
|
lp->rx_tail++;
|
|
}
|
|
}
|
|
|
|
/* MAC interrupt handler */
|
|
static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct macb *lp = netdev_priv(dev);
|
|
u32 intstatus, ctl;
|
|
|
|
/* MAC Interrupt Status register indicates what interrupts are pending.
|
|
* It is automatically cleared once read.
|
|
*/
|
|
intstatus = macb_readl(lp, ISR);
|
|
|
|
/* Receive complete */
|
|
if (intstatus & MACB_BIT(RCOMP))
|
|
at91ether_rx(dev);
|
|
|
|
/* Transmit complete */
|
|
if (intstatus & MACB_BIT(TCOMP)) {
|
|
/* The TCOM bit is set even if the transmission failed */
|
|
if (intstatus & (MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE)))
|
|
lp->stats.tx_errors++;
|
|
|
|
if (lp->skb) {
|
|
dev_kfree_skb_irq(lp->skb);
|
|
lp->skb = NULL;
|
|
dma_unmap_single(NULL, lp->skb_physaddr, lp->skb_length, DMA_TO_DEVICE);
|
|
lp->stats.tx_packets++;
|
|
lp->stats.tx_bytes += lp->skb_length;
|
|
}
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
/* Work-around for EMAC Errata section 41.3.1 */
|
|
if (intstatus & MACB_BIT(RXUBR)) {
|
|
ctl = macb_readl(lp, NCR);
|
|
macb_writel(lp, NCR, ctl & ~MACB_BIT(RE));
|
|
macb_writel(lp, NCR, ctl | MACB_BIT(RE));
|
|
}
|
|
|
|
if (intstatus & MACB_BIT(ISR_ROVR))
|
|
netdev_err(dev, "ROVR error\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void at91ether_poll_controller(struct net_device *dev)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
at91ether_interrupt(dev->irq, dev);
|
|
local_irq_restore(flags);
|
|
}
|
|
#endif
|
|
|
|
static const struct net_device_ops at91ether_netdev_ops = {
|
|
.ndo_open = at91ether_open,
|
|
.ndo_stop = at91ether_close,
|
|
.ndo_start_xmit = at91ether_start_xmit,
|
|
.ndo_get_stats = macb_get_stats,
|
|
.ndo_set_rx_mode = macb_set_rx_mode,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_do_ioctl = macb_ioctl,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = at91ether_poll_controller,
|
|
#endif
|
|
};
|
|
|
|
#if defined(CONFIG_OF)
|
|
static const struct of_device_id at91ether_dt_ids[] = {
|
|
{ .compatible = "cdns,at91rm9200-emac" },
|
|
{ .compatible = "cdns,emac" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, at91ether_dt_ids);
|
|
|
|
static int at91ether_get_phy_mode_dt(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
|
|
if (np)
|
|
return of_get_phy_mode(np);
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int at91ether_get_hwaddr_dt(struct macb *bp)
|
|
{
|
|
struct device_node *np = bp->pdev->dev.of_node;
|
|
|
|
if (np) {
|
|
const char *mac = of_get_mac_address(np);
|
|
if (mac) {
|
|
memcpy(bp->dev->dev_addr, mac, ETH_ALEN);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
#else
|
|
static int at91ether_get_phy_mode_dt(struct platform_device *pdev)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
static int at91ether_get_hwaddr_dt(struct macb *bp)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
/* Detect MAC & PHY and perform ethernet interface initialization */
|
|
static int __init at91ether_probe(struct platform_device *pdev)
|
|
{
|
|
struct macb_platform_data *board_data = pdev->dev.platform_data;
|
|
struct resource *regs;
|
|
struct net_device *dev;
|
|
struct phy_device *phydev;
|
|
struct pinctrl *pinctrl;
|
|
struct macb *lp;
|
|
int res;
|
|
u32 reg;
|
|
|
|
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!regs)
|
|
return -ENOENT;
|
|
|
|
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
|
|
if (IS_ERR(pinctrl)) {
|
|
res = PTR_ERR(pinctrl);
|
|
if (res == -EPROBE_DEFER)
|
|
return res;
|
|
|
|
dev_warn(&pdev->dev, "No pinctrl provided\n");
|
|
}
|
|
|
|
dev = alloc_etherdev(sizeof(struct macb));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
lp = netdev_priv(dev);
|
|
lp->pdev = pdev;
|
|
lp->dev = dev;
|
|
spin_lock_init(&lp->lock);
|
|
|
|
/* physical base address */
|
|
dev->base_addr = regs->start;
|
|
lp->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
|
|
if (!lp->regs) {
|
|
res = -ENOMEM;
|
|
goto err_free_dev;
|
|
}
|
|
|
|
/* Clock */
|
|
lp->pclk = devm_clk_get(&pdev->dev, "ether_clk");
|
|
if (IS_ERR(lp->pclk)) {
|
|
res = PTR_ERR(lp->pclk);
|
|
goto err_free_dev;
|
|
}
|
|
clk_enable(lp->pclk);
|
|
|
|
/* Install the interrupt handler */
|
|
dev->irq = platform_get_irq(pdev, 0);
|
|
res = devm_request_irq(&pdev->dev, dev->irq, at91ether_interrupt, 0, dev->name, dev);
|
|
if (res)
|
|
goto err_disable_clock;
|
|
|
|
ether_setup(dev);
|
|
dev->netdev_ops = &at91ether_netdev_ops;
|
|
dev->ethtool_ops = &macb_ethtool_ops;
|
|
platform_set_drvdata(pdev, dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
res = at91ether_get_hwaddr_dt(lp);
|
|
if (res < 0)
|
|
macb_get_hwaddr(lp);
|
|
|
|
res = at91ether_get_phy_mode_dt(pdev);
|
|
if (res < 0) {
|
|
if (board_data && board_data->is_rmii)
|
|
lp->phy_interface = PHY_INTERFACE_MODE_RMII;
|
|
else
|
|
lp->phy_interface = PHY_INTERFACE_MODE_MII;
|
|
} else {
|
|
lp->phy_interface = res;
|
|
}
|
|
|
|
macb_writel(lp, NCR, 0);
|
|
|
|
reg = MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG);
|
|
if (lp->phy_interface == PHY_INTERFACE_MODE_RMII)
|
|
reg |= MACB_BIT(RM9200_RMII);
|
|
|
|
macb_writel(lp, NCFGR, reg);
|
|
|
|
/* Register the network interface */
|
|
res = register_netdev(dev);
|
|
if (res)
|
|
goto err_disable_clock;
|
|
|
|
if (macb_mii_init(lp) != 0)
|
|
goto err_out_unregister_netdev;
|
|
|
|
/* will be enabled in open() */
|
|
netif_carrier_off(dev);
|
|
|
|
phydev = lp->phy_dev;
|
|
netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
|
|
phydev->drv->name, dev_name(&phydev->dev),
|
|
phydev->irq);
|
|
|
|
/* Display ethernet banner */
|
|
netdev_info(dev, "AT91 ethernet at 0x%08lx int=%d (%pM)\n",
|
|
dev->base_addr, dev->irq, dev->dev_addr);
|
|
|
|
return 0;
|
|
|
|
err_out_unregister_netdev:
|
|
unregister_netdev(dev);
|
|
err_disable_clock:
|
|
clk_disable(lp->pclk);
|
|
err_free_dev:
|
|
free_netdev(dev);
|
|
return res;
|
|
}
|
|
|
|
static int at91ether_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct macb *lp = netdev_priv(dev);
|
|
|
|
if (lp->phy_dev)
|
|
phy_disconnect(lp->phy_dev);
|
|
|
|
mdiobus_unregister(lp->mii_bus);
|
|
kfree(lp->mii_bus->irq);
|
|
mdiobus_free(lp->mii_bus);
|
|
unregister_netdev(dev);
|
|
clk_disable(lp->pclk);
|
|
free_netdev(dev);
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
|
|
{
|
|
struct net_device *net_dev = platform_get_drvdata(pdev);
|
|
struct macb *lp = netdev_priv(net_dev);
|
|
|
|
if (netif_running(net_dev)) {
|
|
netif_stop_queue(net_dev);
|
|
netif_device_detach(net_dev);
|
|
|
|
clk_disable(lp->pclk);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int at91ether_resume(struct platform_device *pdev)
|
|
{
|
|
struct net_device *net_dev = platform_get_drvdata(pdev);
|
|
struct macb *lp = netdev_priv(net_dev);
|
|
|
|
if (netif_running(net_dev)) {
|
|
clk_enable(lp->pclk);
|
|
|
|
netif_device_attach(net_dev);
|
|
netif_start_queue(net_dev);
|
|
}
|
|
return 0;
|
|
}
|
|
#else
|
|
#define at91ether_suspend NULL
|
|
#define at91ether_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver at91ether_driver = {
|
|
.remove = at91ether_remove,
|
|
.suspend = at91ether_suspend,
|
|
.resume = at91ether_resume,
|
|
.driver = {
|
|
.name = "at91_ether",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(at91ether_dt_ids),
|
|
},
|
|
};
|
|
|
|
static int __init at91ether_init(void)
|
|
{
|
|
return platform_driver_probe(&at91ether_driver, at91ether_probe);
|
|
}
|
|
|
|
static void __exit at91ether_exit(void)
|
|
{
|
|
platform_driver_unregister(&at91ether_driver);
|
|
}
|
|
|
|
module_init(at91ether_init)
|
|
module_exit(at91ether_exit)
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
|
|
MODULE_AUTHOR("Andrew Victor");
|
|
MODULE_ALIAS("platform:at91_ether");
|