linux/drivers/acpi/processor_core.c

311 lines
7.7 KiB
C

/*
* Copyright (C) 2005 Intel Corporation
* Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
*
* Alex Chiang <achiang@hp.com>
* - Unified x86/ia64 implementations
*
* I/O APIC hotplug support
* Yinghai Lu <yinghai@kernel.org>
* Jiang Liu <jiang.liu@intel.com>
*/
#include <linux/export.h>
#include <linux/acpi.h>
#include <acpi/processor.h>
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_core");
static struct acpi_table_madt *get_madt_table(void)
{
static struct acpi_table_madt *madt;
static int read_madt;
if (!read_madt) {
if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
(struct acpi_table_header **)&madt)))
madt = NULL;
read_madt++;
}
return madt;
}
static int map_lapic_id(struct acpi_subtable_header *entry,
u32 acpi_id, int *apic_id)
{
struct acpi_madt_local_apic *lapic =
container_of(entry, struct acpi_madt_local_apic, header);
if (!(lapic->lapic_flags & ACPI_MADT_ENABLED))
return -ENODEV;
if (lapic->processor_id != acpi_id)
return -EINVAL;
*apic_id = lapic->id;
return 0;
}
static int map_x2apic_id(struct acpi_subtable_header *entry,
int device_declaration, u32 acpi_id, int *apic_id)
{
struct acpi_madt_local_x2apic *apic =
container_of(entry, struct acpi_madt_local_x2apic, header);
if (!(apic->lapic_flags & ACPI_MADT_ENABLED))
return -ENODEV;
if (device_declaration && (apic->uid == acpi_id)) {
*apic_id = apic->local_apic_id;
return 0;
}
return -EINVAL;
}
static int map_lsapic_id(struct acpi_subtable_header *entry,
int device_declaration, u32 acpi_id, int *apic_id)
{
struct acpi_madt_local_sapic *lsapic =
container_of(entry, struct acpi_madt_local_sapic, header);
if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))
return -ENODEV;
if (device_declaration) {
if ((entry->length < 16) || (lsapic->uid != acpi_id))
return -EINVAL;
} else if (lsapic->processor_id != acpi_id)
return -EINVAL;
*apic_id = (lsapic->id << 8) | lsapic->eid;
return 0;
}
static int map_madt_entry(int type, u32 acpi_id)
{
unsigned long madt_end, entry;
int phys_id = -1; /* CPU hardware ID */
struct acpi_table_madt *madt;
madt = get_madt_table();
if (!madt)
return phys_id;
entry = (unsigned long)madt;
madt_end = entry + madt->header.length;
/* Parse all entries looking for a match. */
entry += sizeof(struct acpi_table_madt);
while (entry + sizeof(struct acpi_subtable_header) < madt_end) {
struct acpi_subtable_header *header =
(struct acpi_subtable_header *)entry;
if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) {
if (!map_lapic_id(header, acpi_id, &phys_id))
break;
} else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) {
if (!map_x2apic_id(header, type, acpi_id, &phys_id))
break;
} else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
if (!map_lsapic_id(header, type, acpi_id, &phys_id))
break;
}
entry += header->length;
}
return phys_id;
}
static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
struct acpi_subtable_header *header;
int phys_id = -1;
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
goto exit;
if (!buffer.length || !buffer.pointer)
goto exit;
obj = buffer.pointer;
if (obj->type != ACPI_TYPE_BUFFER ||
obj->buffer.length < sizeof(struct acpi_subtable_header)) {
goto exit;
}
header = (struct acpi_subtable_header *)obj->buffer.pointer;
if (header->type == ACPI_MADT_TYPE_LOCAL_APIC)
map_lapic_id(header, acpi_id, &phys_id);
else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC)
map_lsapic_id(header, type, acpi_id, &phys_id);
else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC)
map_x2apic_id(header, type, acpi_id, &phys_id);
exit:
kfree(buffer.pointer);
return phys_id;
}
int acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id)
{
int phys_id;
phys_id = map_mat_entry(handle, type, acpi_id);
if (phys_id == -1)
phys_id = map_madt_entry(type, acpi_id);
return phys_id;
}
int acpi_map_cpuid(int phys_id, u32 acpi_id)
{
#ifdef CONFIG_SMP
int i;
#endif
if (phys_id == -1) {
/*
* On UP processor, there is no _MAT or MADT table.
* So above phys_id is always set to -1.
*
* BIOS may define multiple CPU handles even for UP processor.
* For example,
*
* Scope (_PR)
* {
* Processor (CPU0, 0x00, 0x00000410, 0x06) {}
* Processor (CPU1, 0x01, 0x00000410, 0x06) {}
* Processor (CPU2, 0x02, 0x00000410, 0x06) {}
* Processor (CPU3, 0x03, 0x00000410, 0x06) {}
* }
*
* Ignores phys_id and always returns 0 for the processor
* handle with acpi id 0 if nr_cpu_ids is 1.
* This should be the case if SMP tables are not found.
* Return -1 for other CPU's handle.
*/
if (nr_cpu_ids <= 1 && acpi_id == 0)
return acpi_id;
else
return phys_id;
}
#ifdef CONFIG_SMP
for_each_possible_cpu(i) {
if (cpu_physical_id(i) == phys_id)
return i;
}
#else
/* In UP kernel, only processor 0 is valid */
if (phys_id == 0)
return phys_id;
#endif
return -1;
}
int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id)
{
int phys_id;
phys_id = acpi_get_phys_id(handle, type, acpi_id);
return acpi_map_cpuid(phys_id, acpi_id);
}
EXPORT_SYMBOL_GPL(acpi_get_cpuid);
#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
static int get_ioapic_id(struct acpi_subtable_header *entry, u32 gsi_base,
u64 *phys_addr, int *ioapic_id)
{
struct acpi_madt_io_apic *ioapic = (struct acpi_madt_io_apic *)entry;
if (ioapic->global_irq_base != gsi_base)
return 0;
*phys_addr = ioapic->address;
*ioapic_id = ioapic->id;
return 1;
}
static int parse_madt_ioapic_entry(u32 gsi_base, u64 *phys_addr)
{
struct acpi_subtable_header *hdr;
unsigned long madt_end, entry;
struct acpi_table_madt *madt;
int apic_id = -1;
madt = get_madt_table();
if (!madt)
return apic_id;
entry = (unsigned long)madt;
madt_end = entry + madt->header.length;
/* Parse all entries looking for a match. */
entry += sizeof(struct acpi_table_madt);
while (entry + sizeof(struct acpi_subtable_header) < madt_end) {
hdr = (struct acpi_subtable_header *)entry;
if (hdr->type == ACPI_MADT_TYPE_IO_APIC &&
get_ioapic_id(hdr, gsi_base, phys_addr, &apic_id))
break;
else
entry += hdr->length;
}
return apic_id;
}
static int parse_mat_ioapic_entry(acpi_handle handle, u32 gsi_base,
u64 *phys_addr)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_subtable_header *header;
union acpi_object *obj;
int apic_id = -1;
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
goto exit;
if (!buffer.length || !buffer.pointer)
goto exit;
obj = buffer.pointer;
if (obj->type != ACPI_TYPE_BUFFER ||
obj->buffer.length < sizeof(struct acpi_subtable_header))
goto exit;
header = (struct acpi_subtable_header *)obj->buffer.pointer;
if (header->type == ACPI_MADT_TYPE_IO_APIC)
get_ioapic_id(header, gsi_base, phys_addr, &apic_id);
exit:
kfree(buffer.pointer);
return apic_id;
}
/**
* acpi_get_ioapic_id - Get IOAPIC ID and physical address matching @gsi_base
* @handle: ACPI object for IOAPIC device
* @gsi_base: GSI base to match with
* @phys_addr: Pointer to store physical address of matching IOAPIC record
*
* Walk resources returned by ACPI_MAT method, then ACPI MADT table, to search
* for an ACPI IOAPIC record matching @gsi_base.
* Return IOAPIC id and store physical address in @phys_addr if found a match,
* otherwise return <0.
*/
int acpi_get_ioapic_id(acpi_handle handle, u32 gsi_base, u64 *phys_addr)
{
int apic_id;
apic_id = parse_mat_ioapic_entry(handle, gsi_base, phys_addr);
if (apic_id == -1)
apic_id = parse_madt_ioapic_entry(gsi_base, phys_addr);
return apic_id;
}
#endif /* CONFIG_ACPI_HOTPLUG_IOAPIC */