mirror of https://gitee.com/openkylin/linux.git
618 lines
15 KiB
C
618 lines
15 KiB
C
/*----------------------------------------------------------------*/
|
|
/*
|
|
Qlogic linux driver - work in progress. No Warranty express or implied.
|
|
Use at your own risk. Support Tort Reform so you won't have to read all
|
|
these silly disclaimers.
|
|
|
|
Copyright 1994, Tom Zerucha.
|
|
tz@execpc.com
|
|
|
|
Additional Code, and much appreciated help by
|
|
Michael A. Griffith
|
|
grif@cs.ucr.edu
|
|
|
|
Thanks to Eric Youngdale and Dave Hinds for loadable module and PCMCIA
|
|
help respectively, and for suffering through my foolishness during the
|
|
debugging process.
|
|
|
|
Reference Qlogic FAS408 Technical Manual, 53408-510-00A, May 10, 1994
|
|
(you can reference it, but it is incomplete and inaccurate in places)
|
|
|
|
Version 0.46 1/30/97 - kernel 1.2.0+
|
|
|
|
Functions as standalone, loadable, and PCMCIA driver, the latter from
|
|
Dave Hinds' PCMCIA package.
|
|
|
|
Cleaned up 26/10/2002 by Alan Cox <alan@lxorguk.ukuu.org.uk> as part of the 2.5
|
|
SCSI driver cleanup and audit. This driver still needs work on the
|
|
following
|
|
- Non terminating hardware waits
|
|
- Some layering violations with its pcmcia stub
|
|
|
|
Redistributable under terms of the GNU General Public License
|
|
|
|
For the avoidance of doubt the "preferred form" of this code is one which
|
|
is in an open non patent encumbered format. Where cryptographic key signing
|
|
forms part of the process of creating an executable the information
|
|
including keys needed to generate an equivalently functional executable
|
|
are deemed to be part of the source code.
|
|
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/blkdev.h> /* to get disk capacity */
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/stat.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/dma.h>
|
|
|
|
#include "scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include "qlogicfas408.h"
|
|
|
|
/*----------------------------------------------------------------*/
|
|
static int qlcfg5 = (XTALFREQ << 5); /* 15625/512 */
|
|
static int qlcfg6 = SYNCXFRPD;
|
|
static int qlcfg7 = SYNCOFFST;
|
|
static int qlcfg8 = (SLOWCABLE << 7) | (QL_ENABLE_PARITY << 4);
|
|
static int qlcfg9 = ((XTALFREQ + 4) / 5);
|
|
static int qlcfgc = (FASTCLK << 3) | (FASTSCSI << 4);
|
|
|
|
/*----------------------------------------------------------------*/
|
|
|
|
/*----------------------------------------------------------------*/
|
|
/* local functions */
|
|
/*----------------------------------------------------------------*/
|
|
|
|
/* error recovery - reset everything */
|
|
|
|
static void ql_zap(struct qlogicfas408_priv *priv)
|
|
{
|
|
int x;
|
|
int qbase = priv->qbase;
|
|
int int_type = priv->int_type;
|
|
|
|
x = inb(qbase + 0xd);
|
|
REG0;
|
|
outb(3, qbase + 3); /* reset SCSI */
|
|
outb(2, qbase + 3); /* reset chip */
|
|
if (x & 0x80)
|
|
REG1;
|
|
}
|
|
|
|
/*
|
|
* Do a pseudo-dma tranfer
|
|
*/
|
|
|
|
static int ql_pdma(struct qlogicfas408_priv *priv, int phase, char *request, int reqlen)
|
|
{
|
|
int j;
|
|
int qbase = priv->qbase;
|
|
j = 0;
|
|
if (phase & 1) { /* in */
|
|
#if QL_TURBO_PDMA
|
|
rtrc(4)
|
|
/* empty fifo in large chunks */
|
|
if (reqlen >= 128 && (inb(qbase + 8) & 2)) { /* full */
|
|
insl(qbase + 4, request, 32);
|
|
reqlen -= 128;
|
|
request += 128;
|
|
}
|
|
while (reqlen >= 84 && !(j & 0xc0)) /* 2/3 */
|
|
if ((j = inb(qbase + 8)) & 4)
|
|
{
|
|
insl(qbase + 4, request, 21);
|
|
reqlen -= 84;
|
|
request += 84;
|
|
}
|
|
if (reqlen >= 44 && (inb(qbase + 8) & 8)) { /* 1/3 */
|
|
insl(qbase + 4, request, 11);
|
|
reqlen -= 44;
|
|
request += 44;
|
|
}
|
|
#endif
|
|
/* until both empty and int (or until reclen is 0) */
|
|
rtrc(7)
|
|
j = 0;
|
|
while (reqlen && !((j & 0x10) && (j & 0xc0)))
|
|
{
|
|
/* while bytes to receive and not empty */
|
|
j &= 0xc0;
|
|
while (reqlen && !((j = inb(qbase + 8)) & 0x10))
|
|
{
|
|
*request++ = inb(qbase + 4);
|
|
reqlen--;
|
|
}
|
|
if (j & 0x10)
|
|
j = inb(qbase + 8);
|
|
|
|
}
|
|
} else { /* out */
|
|
#if QL_TURBO_PDMA
|
|
rtrc(4)
|
|
if (reqlen >= 128 && inb(qbase + 8) & 0x10) { /* empty */
|
|
outsl(qbase + 4, request, 32);
|
|
reqlen -= 128;
|
|
request += 128;
|
|
}
|
|
while (reqlen >= 84 && !(j & 0xc0)) /* 1/3 */
|
|
if (!((j = inb(qbase + 8)) & 8)) {
|
|
outsl(qbase + 4, request, 21);
|
|
reqlen -= 84;
|
|
request += 84;
|
|
}
|
|
if (reqlen >= 40 && !(inb(qbase + 8) & 4)) { /* 2/3 */
|
|
outsl(qbase + 4, request, 10);
|
|
reqlen -= 40;
|
|
request += 40;
|
|
}
|
|
#endif
|
|
/* until full and int (or until reclen is 0) */
|
|
rtrc(7)
|
|
j = 0;
|
|
while (reqlen && !((j & 2) && (j & 0xc0))) {
|
|
/* while bytes to send and not full */
|
|
while (reqlen && !((j = inb(qbase + 8)) & 2))
|
|
{
|
|
outb(*request++, qbase + 4);
|
|
reqlen--;
|
|
}
|
|
if (j & 2)
|
|
j = inb(qbase + 8);
|
|
}
|
|
}
|
|
/* maybe return reqlen */
|
|
return inb(qbase + 8) & 0xc0;
|
|
}
|
|
|
|
/*
|
|
* Wait for interrupt flag (polled - not real hardware interrupt)
|
|
*/
|
|
|
|
static int ql_wai(struct qlogicfas408_priv *priv)
|
|
{
|
|
int k;
|
|
int qbase = priv->qbase;
|
|
unsigned long i;
|
|
|
|
k = 0;
|
|
i = jiffies + WATCHDOG;
|
|
while (time_before(jiffies, i) && !priv->qabort &&
|
|
!((k = inb(qbase + 4)) & 0xe0)) {
|
|
barrier();
|
|
cpu_relax();
|
|
}
|
|
if (time_after_eq(jiffies, i))
|
|
return (DID_TIME_OUT);
|
|
if (priv->qabort)
|
|
return (priv->qabort == 1 ? DID_ABORT : DID_RESET);
|
|
if (k & 0x60)
|
|
ql_zap(priv);
|
|
if (k & 0x20)
|
|
return (DID_PARITY);
|
|
if (k & 0x40)
|
|
return (DID_ERROR);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initiate scsi command - queueing handler
|
|
* caller must hold host lock
|
|
*/
|
|
|
|
static void ql_icmd(struct scsi_cmnd *cmd)
|
|
{
|
|
struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
|
|
int qbase = priv->qbase;
|
|
int int_type = priv->int_type;
|
|
unsigned int i;
|
|
|
|
priv->qabort = 0;
|
|
|
|
REG0;
|
|
/* clearing of interrupts and the fifo is needed */
|
|
|
|
inb(qbase + 5); /* clear interrupts */
|
|
if (inb(qbase + 5)) /* if still interrupting */
|
|
outb(2, qbase + 3); /* reset chip */
|
|
else if (inb(qbase + 7) & 0x1f)
|
|
outb(1, qbase + 3); /* clear fifo */
|
|
while (inb(qbase + 5)); /* clear ints */
|
|
REG1;
|
|
outb(1, qbase + 8); /* set for PIO pseudo DMA */
|
|
outb(0, qbase + 0xb); /* disable ints */
|
|
inb(qbase + 8); /* clear int bits */
|
|
REG0;
|
|
outb(0x40, qbase + 0xb); /* enable features */
|
|
|
|
/* configurables */
|
|
outb(qlcfgc, qbase + 0xc);
|
|
/* config: no reset interrupt, (initiator) bus id */
|
|
outb(0x40 | qlcfg8 | priv->qinitid, qbase + 8);
|
|
outb(qlcfg7, qbase + 7);
|
|
outb(qlcfg6, qbase + 6);
|
|
/**/ outb(qlcfg5, qbase + 5); /* select timer */
|
|
outb(qlcfg9 & 7, qbase + 9); /* prescaler */
|
|
/* outb(0x99, qbase + 5); */
|
|
outb(scmd_id(cmd), qbase + 4);
|
|
|
|
for (i = 0; i < cmd->cmd_len; i++)
|
|
outb(cmd->cmnd[i], qbase + 2);
|
|
|
|
priv->qlcmd = cmd;
|
|
outb(0x41, qbase + 3); /* select and send command */
|
|
}
|
|
|
|
/*
|
|
* Process scsi command - usually after interrupt
|
|
*/
|
|
|
|
static unsigned int ql_pcmd(struct scsi_cmnd *cmd)
|
|
{
|
|
unsigned int i, j;
|
|
unsigned long k;
|
|
unsigned int result; /* ultimate return result */
|
|
unsigned int status; /* scsi returned status */
|
|
unsigned int message; /* scsi returned message */
|
|
unsigned int phase; /* recorded scsi phase */
|
|
unsigned int reqlen; /* total length of transfer */
|
|
char *buf;
|
|
struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
|
|
int qbase = priv->qbase;
|
|
int int_type = priv->int_type;
|
|
|
|
rtrc(1)
|
|
j = inb(qbase + 6);
|
|
i = inb(qbase + 5);
|
|
if (i == 0x20) {
|
|
return (DID_NO_CONNECT << 16);
|
|
}
|
|
i |= inb(qbase + 5); /* the 0x10 bit can be set after the 0x08 */
|
|
if (i != 0x18) {
|
|
printk(KERN_ERR "Ql:Bad Interrupt status:%02x\n", i);
|
|
ql_zap(priv);
|
|
return (DID_BAD_INTR << 16);
|
|
}
|
|
j &= 7; /* j = inb( qbase + 7 ) >> 5; */
|
|
|
|
/* correct status is supposed to be step 4 */
|
|
/* it sometimes returns step 3 but with 0 bytes left to send */
|
|
/* We can try stuffing the FIFO with the max each time, but we will get a
|
|
sequence of 3 if any bytes are left (but we do flush the FIFO anyway */
|
|
|
|
if (j != 3 && j != 4) {
|
|
printk(KERN_ERR "Ql:Bad sequence for command %d, int %02X, cmdleft = %d\n",
|
|
j, i, inb(qbase + 7) & 0x1f);
|
|
ql_zap(priv);
|
|
return (DID_ERROR << 16);
|
|
}
|
|
result = DID_OK;
|
|
if (inb(qbase + 7) & 0x1f) /* if some bytes in fifo */
|
|
outb(1, qbase + 3); /* clear fifo */
|
|
/* note that request_bufflen is the total xfer size when sg is used */
|
|
reqlen = scsi_bufflen(cmd);
|
|
/* note that it won't work if transfers > 16M are requested */
|
|
if (reqlen && !((phase = inb(qbase + 4)) & 6)) { /* data phase */
|
|
struct scatterlist *sg;
|
|
rtrc(2)
|
|
outb(reqlen, qbase); /* low-mid xfer cnt */
|
|
outb(reqlen >> 8, qbase + 1); /* low-mid xfer cnt */
|
|
outb(reqlen >> 16, qbase + 0xe); /* high xfer cnt */
|
|
outb(0x90, qbase + 3); /* command do xfer */
|
|
/* PIO pseudo DMA to buffer or sglist */
|
|
REG1;
|
|
|
|
scsi_for_each_sg(cmd, sg, scsi_sg_count(cmd), i) {
|
|
if (priv->qabort) {
|
|
REG0;
|
|
return ((priv->qabort == 1 ?
|
|
DID_ABORT : DID_RESET) << 16);
|
|
}
|
|
buf = sg_virt(sg);
|
|
if (ql_pdma(priv, phase, buf, sg->length))
|
|
break;
|
|
}
|
|
REG0;
|
|
rtrc(2)
|
|
/*
|
|
* Wait for irq (split into second state of irq handler
|
|
* if this can take time)
|
|
*/
|
|
if ((k = ql_wai(priv)))
|
|
return (k << 16);
|
|
k = inb(qbase + 5); /* should be 0x10, bus service */
|
|
}
|
|
|
|
/*
|
|
* Enter Status (and Message In) Phase
|
|
*/
|
|
|
|
k = jiffies + WATCHDOG;
|
|
|
|
while (time_before(jiffies, k) && !priv->qabort &&
|
|
!(inb(qbase + 4) & 6))
|
|
cpu_relax(); /* wait for status phase */
|
|
|
|
if (time_after_eq(jiffies, k)) {
|
|
ql_zap(priv);
|
|
return (DID_TIME_OUT << 16);
|
|
}
|
|
|
|
/* FIXME: timeout ?? */
|
|
while (inb(qbase + 5))
|
|
cpu_relax(); /* clear pending ints */
|
|
|
|
if (priv->qabort)
|
|
return ((priv->qabort == 1 ? DID_ABORT : DID_RESET) << 16);
|
|
|
|
outb(0x11, qbase + 3); /* get status and message */
|
|
if ((k = ql_wai(priv)))
|
|
return (k << 16);
|
|
i = inb(qbase + 5); /* get chip irq stat */
|
|
j = inb(qbase + 7) & 0x1f; /* and bytes rec'd */
|
|
status = inb(qbase + 2);
|
|
message = inb(qbase + 2);
|
|
|
|
/*
|
|
* Should get function complete int if Status and message, else
|
|
* bus serv if only status
|
|
*/
|
|
if (!((i == 8 && j == 2) || (i == 0x10 && j == 1))) {
|
|
printk(KERN_ERR "Ql:Error during status phase, int=%02X, %d bytes recd\n", i, j);
|
|
result = DID_ERROR;
|
|
}
|
|
outb(0x12, qbase + 3); /* done, disconnect */
|
|
rtrc(1)
|
|
if ((k = ql_wai(priv)))
|
|
return (k << 16);
|
|
|
|
/*
|
|
* Should get bus service interrupt and disconnect interrupt
|
|
*/
|
|
|
|
i = inb(qbase + 5); /* should be bus service */
|
|
while (!priv->qabort && ((i & 0x20) != 0x20)) {
|
|
barrier();
|
|
cpu_relax();
|
|
i |= inb(qbase + 5);
|
|
}
|
|
rtrc(0)
|
|
|
|
if (priv->qabort)
|
|
return ((priv->qabort == 1 ? DID_ABORT : DID_RESET) << 16);
|
|
|
|
return (result << 16) | (message << 8) | (status & STATUS_MASK);
|
|
}
|
|
|
|
/*
|
|
* Interrupt handler
|
|
*/
|
|
|
|
static void ql_ihandl(void *dev_id)
|
|
{
|
|
struct scsi_cmnd *icmd;
|
|
struct Scsi_Host *host = dev_id;
|
|
struct qlogicfas408_priv *priv = get_priv_by_host(host);
|
|
int qbase = priv->qbase;
|
|
REG0;
|
|
|
|
if (!(inb(qbase + 4) & 0x80)) /* false alarm? */
|
|
return;
|
|
|
|
if (priv->qlcmd == NULL) { /* no command to process? */
|
|
int i;
|
|
i = 16;
|
|
while (i-- && inb(qbase + 5)); /* maybe also ql_zap() */
|
|
return;
|
|
}
|
|
icmd = priv->qlcmd;
|
|
icmd->result = ql_pcmd(icmd);
|
|
priv->qlcmd = NULL;
|
|
/*
|
|
* If result is CHECK CONDITION done calls qcommand to request
|
|
* sense
|
|
*/
|
|
(icmd->scsi_done) (icmd);
|
|
}
|
|
|
|
irqreturn_t qlogicfas408_ihandl(int irq, void *dev_id)
|
|
{
|
|
unsigned long flags;
|
|
struct Scsi_Host *host = dev_id;
|
|
|
|
spin_lock_irqsave(host->host_lock, flags);
|
|
ql_ihandl(dev_id);
|
|
spin_unlock_irqrestore(host->host_lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Queued command
|
|
*/
|
|
|
|
static int qlogicfas408_queuecommand_lck(struct scsi_cmnd *cmd,
|
|
void (*done) (struct scsi_cmnd *))
|
|
{
|
|
struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
|
|
if (scmd_id(cmd) == priv->qinitid) {
|
|
cmd->result = DID_BAD_TARGET << 16;
|
|
done(cmd);
|
|
return 0;
|
|
}
|
|
|
|
cmd->scsi_done = done;
|
|
/* wait for the last command's interrupt to finish */
|
|
while (priv->qlcmd != NULL) {
|
|
barrier();
|
|
cpu_relax();
|
|
}
|
|
ql_icmd(cmd);
|
|
return 0;
|
|
}
|
|
|
|
DEF_SCSI_QCMD(qlogicfas408_queuecommand)
|
|
|
|
/*
|
|
* Return bios parameters
|
|
*/
|
|
|
|
int qlogicfas408_biosparam(struct scsi_device *disk, struct block_device *dev,
|
|
sector_t capacity, int ip[])
|
|
{
|
|
/* This should mimic the DOS Qlogic driver's behavior exactly */
|
|
ip[0] = 0x40;
|
|
ip[1] = 0x20;
|
|
ip[2] = (unsigned long) capacity / (ip[0] * ip[1]);
|
|
if (ip[2] > 1024) {
|
|
ip[0] = 0xff;
|
|
ip[1] = 0x3f;
|
|
ip[2] = (unsigned long) capacity / (ip[0] * ip[1]);
|
|
#if 0
|
|
if (ip[2] > 1023)
|
|
ip[2] = 1023;
|
|
#endif
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Abort a command in progress
|
|
*/
|
|
|
|
int qlogicfas408_abort(struct scsi_cmnd *cmd)
|
|
{
|
|
struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
|
|
priv->qabort = 1;
|
|
ql_zap(priv);
|
|
return SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* Reset SCSI bus
|
|
* FIXME: This function is invoked with cmd = NULL directly by
|
|
* the PCMCIA qlogic_stub code. This wants fixing
|
|
*/
|
|
|
|
int qlogicfas408_bus_reset(struct scsi_cmnd *cmd)
|
|
{
|
|
struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
|
|
unsigned long flags;
|
|
|
|
priv->qabort = 2;
|
|
|
|
spin_lock_irqsave(cmd->device->host->host_lock, flags);
|
|
ql_zap(priv);
|
|
spin_unlock_irqrestore(cmd->device->host->host_lock, flags);
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* Return info string
|
|
*/
|
|
|
|
const char *qlogicfas408_info(struct Scsi_Host *host)
|
|
{
|
|
struct qlogicfas408_priv *priv = get_priv_by_host(host);
|
|
return priv->qinfo;
|
|
}
|
|
|
|
/*
|
|
* Get type of chip
|
|
*/
|
|
|
|
int qlogicfas408_get_chip_type(int qbase, int int_type)
|
|
{
|
|
REG1;
|
|
return inb(qbase + 0xe) & 0xf8;
|
|
}
|
|
|
|
/*
|
|
* Perform initialization tasks
|
|
*/
|
|
|
|
void qlogicfas408_setup(int qbase, int id, int int_type)
|
|
{
|
|
outb(1, qbase + 8); /* set for PIO pseudo DMA */
|
|
REG0;
|
|
outb(0x40 | qlcfg8 | id, qbase + 8); /* (ini) bus id, disable scsi rst */
|
|
outb(qlcfg5, qbase + 5); /* select timer */
|
|
outb(qlcfg9, qbase + 9); /* prescaler */
|
|
|
|
#if QL_RESET_AT_START
|
|
outb(3, qbase + 3);
|
|
|
|
REG1;
|
|
/* FIXME: timeout */
|
|
while (inb(qbase + 0xf) & 4)
|
|
cpu_relax();
|
|
|
|
REG0;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Checks if this is a QLogic FAS 408
|
|
*/
|
|
|
|
int qlogicfas408_detect(int qbase, int int_type)
|
|
{
|
|
REG1;
|
|
return (((inb(qbase + 0xe) ^ inb(qbase + 0xe)) == 7) &&
|
|
((inb(qbase + 0xe) ^ inb(qbase + 0xe)) == 7));
|
|
}
|
|
|
|
/*
|
|
* Disable interrupts
|
|
*/
|
|
|
|
void qlogicfas408_disable_ints(struct qlogicfas408_priv *priv)
|
|
{
|
|
int qbase = priv->qbase;
|
|
int int_type = priv->int_type;
|
|
|
|
REG1;
|
|
outb(0, qbase + 0xb); /* disable ints */
|
|
}
|
|
|
|
/*
|
|
* Init and exit functions
|
|
*/
|
|
|
|
static int __init qlogicfas408_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void __exit qlogicfas408_exit(void)
|
|
{
|
|
|
|
}
|
|
|
|
MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
|
|
MODULE_DESCRIPTION("Driver for the Qlogic FAS SCSI controllers");
|
|
MODULE_LICENSE("GPL");
|
|
module_init(qlogicfas408_init);
|
|
module_exit(qlogicfas408_exit);
|
|
|
|
EXPORT_SYMBOL(qlogicfas408_info);
|
|
EXPORT_SYMBOL(qlogicfas408_queuecommand);
|
|
EXPORT_SYMBOL(qlogicfas408_abort);
|
|
EXPORT_SYMBOL(qlogicfas408_bus_reset);
|
|
EXPORT_SYMBOL(qlogicfas408_biosparam);
|
|
EXPORT_SYMBOL(qlogicfas408_ihandl);
|
|
EXPORT_SYMBOL(qlogicfas408_get_chip_type);
|
|
EXPORT_SYMBOL(qlogicfas408_setup);
|
|
EXPORT_SYMBOL(qlogicfas408_detect);
|
|
EXPORT_SYMBOL(qlogicfas408_disable_ints);
|
|
|