linux/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c

200 lines
5.6 KiB
C

/* Copyright Altera Corporation (C) 2014. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2,
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Adopted from dwmac-sti.c
*/
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/stmmac.h>
#include "stmmac.h"
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_WIDTH 2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003
struct socfpga_dwmac {
int interface;
u32 reg_offset;
u32 reg_shift;
struct device *dev;
struct regmap *sys_mgr_base_addr;
struct reset_control *stmmac_rst;
};
static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)
{
struct device_node *np = dev->of_node;
struct regmap *sys_mgr_base_addr;
u32 reg_offset, reg_shift;
int ret;
dwmac->stmmac_rst = devm_reset_control_get(dev,
STMMAC_RESOURCE_NAME);
if (IS_ERR(dwmac->stmmac_rst)) {
dev_info(dev, "Could not get reset control!\n");
return -EINVAL;
}
dwmac->interface = of_get_phy_mode(np);
sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
if (IS_ERR(sys_mgr_base_addr)) {
dev_info(dev, "No sysmgr-syscon node found\n");
return PTR_ERR(sys_mgr_base_addr);
}
ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 1, &reg_offset);
if (ret) {
dev_info(dev, "Could not read reg_offset from sysmgr-syscon!\n");
return -EINVAL;
}
ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 2, &reg_shift);
if (ret) {
dev_info(dev, "Could not read reg_shift from sysmgr-syscon!\n");
return -EINVAL;
}
dwmac->reg_offset = reg_offset;
dwmac->reg_shift = reg_shift;
dwmac->sys_mgr_base_addr = sys_mgr_base_addr;
dwmac->dev = dev;
return 0;
}
static int socfpga_dwmac_setup(struct socfpga_dwmac *dwmac)
{
struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr;
int phymode = dwmac->interface;
u32 reg_offset = dwmac->reg_offset;
u32 reg_shift = dwmac->reg_shift;
u32 ctrl, val;
switch (phymode) {
case PHY_INTERFACE_MODE_RGMII:
val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
break;
case PHY_INTERFACE_MODE_MII:
case PHY_INTERFACE_MODE_GMII:
val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
break;
default:
dev_err(dwmac->dev, "bad phy mode %d\n", phymode);
return -EINVAL;
}
regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
ctrl |= val << reg_shift;
regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
return 0;
}
static void *socfpga_dwmac_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
int ret;
struct socfpga_dwmac *dwmac;
dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL);
if (!dwmac)
return ERR_PTR(-ENOMEM);
ret = socfpga_dwmac_parse_data(dwmac, dev);
if (ret) {
dev_err(dev, "Unable to parse OF data\n");
return ERR_PTR(ret);
}
ret = socfpga_dwmac_setup(dwmac);
if (ret) {
dev_err(dev, "couldn't setup SoC glue (%d)\n", ret);
return ERR_PTR(ret);
}
return dwmac;
}
static void socfpga_dwmac_exit(struct platform_device *pdev, void *priv)
{
struct socfpga_dwmac *dwmac = priv;
/* On socfpga platform exit, assert and hold reset to the
* enet controller - the default state after a hard reset.
*/
if (dwmac->stmmac_rst)
reset_control_assert(dwmac->stmmac_rst);
}
static int socfpga_dwmac_init(struct platform_device *pdev, void *priv)
{
struct socfpga_dwmac *dwmac = priv;
struct net_device *ndev = platform_get_drvdata(pdev);
struct stmmac_priv *stpriv = NULL;
int ret = 0;
if (ndev)
stpriv = netdev_priv(ndev);
/* Assert reset to the enet controller before changing the phy mode */
if (dwmac->stmmac_rst)
reset_control_assert(dwmac->stmmac_rst);
/* Setup the phy mode in the system manager registers according to
* devicetree configuration
*/
ret = socfpga_dwmac_setup(dwmac);
/* Deassert reset for the phy configuration to be sampled by
* the enet controller, and operation to start in requested mode
*/
if (dwmac->stmmac_rst)
reset_control_deassert(dwmac->stmmac_rst);
/* Before the enet controller is suspended, the phy is suspended.
* This causes the phy clock to be gated. The enet controller is
* resumed before the phy, so the clock is still gated "off" when
* the enet controller is resumed. This code makes sure the phy
* is "resumed" before reinitializing the enet controller since
* the enet controller depends on an active phy clock to complete
* a DMA reset. A DMA reset will "time out" if executed
* with no phy clock input on the Synopsys enet controller.
* Verified through Synopsys Case #8000711656.
*
* Note that the phy clock is also gated when the phy is isolated.
* Phy "suspend" and "isolate" controls are located in phy basic
* control register 0, and can be modified by the phy driver
* framework.
*/
if (stpriv && stpriv->phydev)
phy_resume(stpriv->phydev);
return ret;
}
const struct stmmac_of_data socfpga_gmac_data = {
.setup = socfpga_dwmac_probe,
.init = socfpga_dwmac_init,
.exit = socfpga_dwmac_exit,
};