linux/Documentation/devicetree/bindings/media/i2c/mt9p031.txt

41 lines
938 B
Plaintext

* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with
an active array size of 2592H x 1944V. It is programmable through a simple
two-wire serial interface.
Required Properties:
- compatible: value should be either one among the following
(a) "aptina,mt9p031" for mt9p031 sensor
(b) "aptina,mt9p031m" for mt9p031m sensor
- input-clock-frequency: Input clock frequency.
- pixel-clock-frequency: Pixel clock frequency.
Optional Properties:
- reset-gpios: Chip reset GPIO
For further reading on port node refer to
Documentation/devicetree/bindings/media/video-interfaces.txt.
Example:
i2c0@1c22000 {
...
...
mt9p031@5d {
compatible = "aptina,mt9p031";
reg = <0x5d>;
reset-gpios = <&gpio3 30 0>;
port {
mt9p031_1: endpoint {
input-clock-frequency = <6000000>;
pixel-clock-frequency = <96000000>;
};
};
};
...
};