mirror of https://gitee.com/openkylin/linux.git
612 lines
16 KiB
C
612 lines
16 KiB
C
/* SPDX-License-Identifier: MIT
|
|
* Copyright (C) 2018 Intel Corp.
|
|
*
|
|
* Authors:
|
|
* Manasi Navare <manasi.d.navare@intel.com>
|
|
*/
|
|
|
|
#ifndef DRM_DSC_H_
|
|
#define DRM_DSC_H_
|
|
|
|
#include <drm/drm_dp_helper.h>
|
|
|
|
/* VESA Display Stream Compression DSC 1.2 constants */
|
|
#define DSC_NUM_BUF_RANGES 15
|
|
#define DSC_MUX_WORD_SIZE_8_10_BPC 48
|
|
#define DSC_MUX_WORD_SIZE_12_BPC 64
|
|
#define DSC_RC_PIXELS_PER_GROUP 3
|
|
#define DSC_SCALE_DECREMENT_INTERVAL_MAX 4095
|
|
#define DSC_RANGE_BPG_OFFSET_MASK 0x3f
|
|
|
|
/* DSC Rate Control Constants */
|
|
#define DSC_RC_MODEL_SIZE_CONST 8192
|
|
#define DSC_RC_EDGE_FACTOR_CONST 6
|
|
#define DSC_RC_TGT_OFFSET_HI_CONST 3
|
|
#define DSC_RC_TGT_OFFSET_LO_CONST 3
|
|
|
|
/* DSC PPS constants and macros */
|
|
#define DSC_PPS_VERSION_MAJOR_SHIFT 4
|
|
#define DSC_PPS_BPC_SHIFT 4
|
|
#define DSC_PPS_MSB_SHIFT 8
|
|
#define DSC_PPS_LSB_MASK (0xFF << 0)
|
|
#define DSC_PPS_BPP_HIGH_MASK (0x3 << 8)
|
|
#define DSC_PPS_VBR_EN_SHIFT 2
|
|
#define DSC_PPS_SIMPLE422_SHIFT 3
|
|
#define DSC_PPS_CONVERT_RGB_SHIFT 4
|
|
#define DSC_PPS_BLOCK_PRED_EN_SHIFT 5
|
|
#define DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK (0x3 << 8)
|
|
#define DSC_PPS_SCALE_DEC_INT_HIGH_MASK (0xF << 8)
|
|
#define DSC_PPS_RC_TGT_OFFSET_HI_SHIFT 4
|
|
#define DSC_PPS_RC_RANGE_MINQP_SHIFT 11
|
|
#define DSC_PPS_RC_RANGE_MAXQP_SHIFT 6
|
|
#define DSC_PPS_NATIVE_420_SHIFT 1
|
|
#define DSC_1_2_MAX_LINEBUF_DEPTH_BITS 16
|
|
#define DSC_1_2_MAX_LINEBUF_DEPTH_VAL 0
|
|
#define DSC_1_1_MAX_LINEBUF_DEPTH_BITS 13
|
|
|
|
/**
|
|
* struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters
|
|
*
|
|
* This defines different rate control parameters used by the DSC engine
|
|
* to compress the frame.
|
|
*/
|
|
struct drm_dsc_rc_range_parameters {
|
|
/**
|
|
* @range_min_qp: Min Quantization Parameters allowed for this range
|
|
*/
|
|
u8 range_min_qp;
|
|
/**
|
|
* @range_max_qp: Max Quantization Parameters allowed for this range
|
|
*/
|
|
u8 range_max_qp;
|
|
/**
|
|
* @range_bpg_offset:
|
|
* Bits/group offset to apply to target for this group
|
|
*/
|
|
u8 range_bpg_offset;
|
|
};
|
|
|
|
/**
|
|
* struct drm_dsc_config - Parameters required to configure DSC
|
|
*
|
|
* Driver populates this structure with all the parameters required
|
|
* to configure the display stream compression on the source.
|
|
*/
|
|
struct drm_dsc_config {
|
|
/**
|
|
* @line_buf_depth:
|
|
* Bits per component for previous reconstructed line buffer
|
|
*/
|
|
u8 line_buf_depth;
|
|
/**
|
|
* @bits_per_component: Bits per component to code (8/10/12)
|
|
*/
|
|
u8 bits_per_component;
|
|
/**
|
|
* @convert_rgb:
|
|
* Flag to indicate if RGB - YCoCg conversion is needed
|
|
* True if RGB input, False if YCoCg input
|
|
*/
|
|
bool convert_rgb;
|
|
/**
|
|
* @slice_count: Number fo slices per line used by the DSC encoder
|
|
*/
|
|
u8 slice_count;
|
|
/**
|
|
* @slice_width: Width of each slice in pixels
|
|
*/
|
|
u16 slice_width;
|
|
/**
|
|
* @slice_height: Slice height in pixels
|
|
*/
|
|
u16 slice_height;
|
|
/**
|
|
* @simple_422: True if simple 4_2_2 mode is enabled else False
|
|
*/
|
|
bool simple_422;
|
|
/**
|
|
* @pic_width: Width of the input display frame in pixels
|
|
*/
|
|
u16 pic_width;
|
|
/**
|
|
* @pic_height: Vertical height of the input display frame
|
|
*/
|
|
u16 pic_height;
|
|
/**
|
|
* @rc_tgt_offset_high:
|
|
* Offset to bits/group used by RC to determine QP adjustment
|
|
*/
|
|
u8 rc_tgt_offset_high;
|
|
/**
|
|
* @rc_tgt_offset_low:
|
|
* Offset to bits/group used by RC to determine QP adjustment
|
|
*/
|
|
u8 rc_tgt_offset_low;
|
|
/**
|
|
* @bits_per_pixel:
|
|
* Target bits per pixel with 4 fractional bits, bits_per_pixel << 4
|
|
*/
|
|
u16 bits_per_pixel;
|
|
/**
|
|
* @rc_edge_factor:
|
|
* Factor to determine if an edge is present based on the bits produced
|
|
*/
|
|
u8 rc_edge_factor;
|
|
/**
|
|
* @rc_quant_incr_limit1:
|
|
* Slow down incrementing once the range reaches this value
|
|
*/
|
|
u8 rc_quant_incr_limit1;
|
|
/**
|
|
* @rc_quant_incr_limit0:
|
|
* Slow down incrementing once the range reaches this value
|
|
*/
|
|
u8 rc_quant_incr_limit0;
|
|
/**
|
|
* @initial_xmit_delay:
|
|
* Number of pixels to delay the initial transmission
|
|
*/
|
|
u16 initial_xmit_delay;
|
|
/**
|
|
* @initial_dec_delay:
|
|
* Initial decoder delay, number of pixel times that the decoder
|
|
* accumulates data in its rate buffer before starting to decode
|
|
* and output pixels.
|
|
*/
|
|
u16 initial_dec_delay;
|
|
/**
|
|
* @block_pred_enable:
|
|
* True if block prediction is used to code any groups within the
|
|
* picture. False if BP not used
|
|
*/
|
|
bool block_pred_enable;
|
|
/**
|
|
* @first_line_bpg_offset:
|
|
* Number of additional bits allocated for each group on the first
|
|
* line of slice.
|
|
*/
|
|
u8 first_line_bpg_offset;
|
|
/**
|
|
* @initial_offset: Value to use for RC model offset at slice start
|
|
*/
|
|
u16 initial_offset;
|
|
/**
|
|
* @rc_buf_thresh: Thresholds defining each of the buffer ranges
|
|
*/
|
|
u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
|
|
/**
|
|
* @rc_range_params:
|
|
* Parameters for each of the RC ranges defined in
|
|
* &struct drm_dsc_rc_range_parameters
|
|
*/
|
|
struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES];
|
|
/**
|
|
* @rc_model_size: Total size of RC model
|
|
*/
|
|
u16 rc_model_size;
|
|
/**
|
|
* @flatness_min_qp: Minimum QP where flatness information is sent
|
|
*/
|
|
u8 flatness_min_qp;
|
|
/**
|
|
* @flatness_max_qp: Maximum QP where flatness information is sent
|
|
*/
|
|
u8 flatness_max_qp;
|
|
/**
|
|
* @initial_scale_value: Initial value for the scale factor
|
|
*/
|
|
u8 initial_scale_value;
|
|
/**
|
|
* @scale_decrement_interval:
|
|
* Specifies number of group times between decrementing the scale factor
|
|
* at beginning of a slice.
|
|
*/
|
|
u16 scale_decrement_interval;
|
|
/**
|
|
* @scale_increment_interval:
|
|
* Number of group times between incrementing the scale factor value
|
|
* used at the beginning of a slice.
|
|
*/
|
|
u16 scale_increment_interval;
|
|
/**
|
|
* @nfl_bpg_offset: Non first line BPG offset to be used
|
|
*/
|
|
u16 nfl_bpg_offset;
|
|
/**
|
|
* @slice_bpg_offset: BPG offset used to enforce slice bit
|
|
*/
|
|
u16 slice_bpg_offset;
|
|
/**
|
|
* @final_offset: Final RC linear transformation offset value
|
|
*/
|
|
u16 final_offset;
|
|
/**
|
|
* @vbr_enable: True if VBR mode is enabled, false if disabled
|
|
*/
|
|
bool vbr_enable;
|
|
/**
|
|
* @mux_word_size: Mux word size (in bits) for SSM mode
|
|
*/
|
|
u8 mux_word_size;
|
|
/**
|
|
* @slice_chunk_size:
|
|
* The (max) size in bytes of the "chunks" that are used in slice
|
|
* multiplexing.
|
|
*/
|
|
u16 slice_chunk_size;
|
|
/**
|
|
* @rc_bits: Rate control buffer size in bits
|
|
*/
|
|
u16 rc_bits;
|
|
/**
|
|
* @dsc_version_minor: DSC minor version
|
|
*/
|
|
u8 dsc_version_minor;
|
|
/**
|
|
* @dsc_version_major: DSC major version
|
|
*/
|
|
u8 dsc_version_major;
|
|
/**
|
|
* @native_422: True if Native 4:2:2 supported, else false
|
|
*/
|
|
bool native_422;
|
|
/**
|
|
* @native_420: True if Native 4:2:0 supported else false.
|
|
*/
|
|
bool native_420;
|
|
/**
|
|
* @second_line_bpg_offset:
|
|
* Additional bits/grp for seconnd line of slice for native 4:2:0
|
|
*/
|
|
u8 second_line_bpg_offset;
|
|
/**
|
|
* @nsl_bpg_offset:
|
|
* Num of bits deallocated for each grp that is not in second line of
|
|
* slice
|
|
*/
|
|
u16 nsl_bpg_offset;
|
|
/**
|
|
* @second_line_offset_adj:
|
|
* Offset adjustment for second line in Native 4:2:0 mode
|
|
*/
|
|
u16 second_line_offset_adj;
|
|
};
|
|
|
|
/**
|
|
* struct drm_dsc_picture_parameter_set - Represents 128 bytes of
|
|
* Picture Parameter Set
|
|
*
|
|
* The VESA DSC standard defines picture parameter set (PPS) which display
|
|
* stream compression encoders must communicate to decoders.
|
|
* The PPS is encapsulated in 128 bytes (PPS 0 through PPS 127). The fields in
|
|
* this structure are as per Table 4.1 in Vesa DSC specification v1.1/v1.2.
|
|
* The PPS fields that span over more than a byte should be stored in Big Endian
|
|
* format.
|
|
*/
|
|
struct drm_dsc_picture_parameter_set {
|
|
/**
|
|
* @dsc_version:
|
|
* PPS0[3:0] - dsc_version_minor: Contains Minor version of DSC
|
|
* PPS0[7:4] - dsc_version_major: Contains major version of DSC
|
|
*/
|
|
u8 dsc_version;
|
|
/**
|
|
* @pps_identifier:
|
|
* PPS1[7:0] - Application specific identifier that can be
|
|
* used to differentiate between different PPS tables.
|
|
*/
|
|
u8 pps_identifier;
|
|
/**
|
|
* @pps_reserved:
|
|
* PPS2[7:0]- RESERVED Byte
|
|
*/
|
|
u8 pps_reserved;
|
|
/**
|
|
* @pps_3:
|
|
* PPS3[3:0] - linebuf_depth: Contains linebuffer bit depth used to
|
|
* generate the bitstream. (0x0 - 16 bits for DSC 1.2, 0x8 - 8 bits,
|
|
* 0xA - 10 bits, 0xB - 11 bits, 0xC - 12 bits, 0xD - 13 bits,
|
|
* 0xE - 14 bits for DSC1.2, 0xF - 14 bits for DSC 1.2.
|
|
* PPS3[7:4] - bits_per_component: Bits per component for the original
|
|
* pixels of the encoded picture.
|
|
* 0x0 = 16bpc (allowed only when dsc_version_minor = 0x2)
|
|
* 0x8 = 8bpc, 0xA = 10bpc, 0xC = 12bpc, 0xE = 14bpc (also
|
|
* allowed only when dsc_minor_version = 0x2)
|
|
*/
|
|
u8 pps_3;
|
|
/**
|
|
* @pps_4:
|
|
* PPS4[1:0] -These are the most significant 2 bits of
|
|
* compressed BPP bits_per_pixel[9:0] syntax element.
|
|
* PPS4[2] - vbr_enable: 0 = VBR disabled, 1 = VBR enabled
|
|
* PPS4[3] - simple_422: Indicates if decoder drops samples to
|
|
* reconstruct the 4:2:2 picture.
|
|
* PPS4[4] - Convert_rgb: Indicates if DSC color space conversion is
|
|
* active.
|
|
* PPS4[5] - blobk_pred_enable: Indicates if BP is used to code any
|
|
* groups in picture
|
|
* PPS4[7:6] - Reseved bits
|
|
*/
|
|
u8 pps_4;
|
|
/**
|
|
* @bits_per_pixel_low:
|
|
* PPS5[7:0] - This indicates the lower significant 8 bits of
|
|
* the compressed BPP bits_per_pixel[9:0] element.
|
|
*/
|
|
u8 bits_per_pixel_low;
|
|
/**
|
|
* @pic_height:
|
|
* PPS6[7:0], PPS7[7:0] -pic_height: Specifies the number of pixel rows
|
|
* within the raster.
|
|
*/
|
|
__be16 pic_height;
|
|
/**
|
|
* @pic_width:
|
|
* PPS8[7:0], PPS9[7:0] - pic_width: Number of pixel columns within
|
|
* the raster.
|
|
*/
|
|
__be16 pic_width;
|
|
/**
|
|
* @slice_height:
|
|
* PPS10[7:0], PPS11[7:0] - Slice height in units of pixels.
|
|
*/
|
|
__be16 slice_height;
|
|
/**
|
|
* @slice_width:
|
|
* PPS12[7:0], PPS13[7:0] - Slice width in terms of pixels.
|
|
*/
|
|
__be16 slice_width;
|
|
/**
|
|
* @chunk_size:
|
|
* PPS14[7:0], PPS15[7:0] - Size in units of bytes of the chunks
|
|
* that are used for slice multiplexing.
|
|
*/
|
|
__be16 chunk_size;
|
|
/**
|
|
* @initial_xmit_delay_high:
|
|
* PPS16[1:0] - Most Significant two bits of initial transmission delay.
|
|
* It specifies the number of pixel times that the encoder waits before
|
|
* transmitting data from its rate buffer.
|
|
* PPS16[7:2] - Reserved
|
|
*/
|
|
u8 initial_xmit_delay_high;
|
|
/**
|
|
* @initial_xmit_delay_low:
|
|
* PPS17[7:0] - Least significant 8 bits of initial transmission delay.
|
|
*/
|
|
u8 initial_xmit_delay_low;
|
|
/**
|
|
* @initial_dec_delay:
|
|
*
|
|
* PPS18[7:0], PPS19[7:0] - Initial decoding delay which is the number
|
|
* of pixel times that the decoder accumulates data in its rate buffer
|
|
* before starting to decode and output pixels.
|
|
*/
|
|
__be16 initial_dec_delay;
|
|
/**
|
|
* @pps20_reserved:
|
|
*
|
|
* PPS20[7:0] - Reserved
|
|
*/
|
|
u8 pps20_reserved;
|
|
/**
|
|
* @initial_scale_value:
|
|
* PPS21[5:0] - Initial rcXformScale factor used at beginning
|
|
* of a slice.
|
|
* PPS21[7:6] - Reserved
|
|
*/
|
|
u8 initial_scale_value;
|
|
/**
|
|
* @scale_increment_interval:
|
|
* PPS22[7:0], PPS23[7:0] - Number of group times between incrementing
|
|
* the rcXformScale factor at end of a slice.
|
|
*/
|
|
__be16 scale_increment_interval;
|
|
/**
|
|
* @scale_decrement_interval_high:
|
|
* PPS24[3:0] - Higher 4 bits indicating number of group times between
|
|
* decrementing the rcXformScale factor at beginning of a slice.
|
|
* PPS24[7:4] - Reserved
|
|
*/
|
|
u8 scale_decrement_interval_high;
|
|
/**
|
|
* @scale_decrement_interval_low:
|
|
* PPS25[7:0] - Lower 8 bits of scale decrement interval
|
|
*/
|
|
u8 scale_decrement_interval_low;
|
|
/**
|
|
* @pps26_reserved:
|
|
* PPS26[7:0]
|
|
*/
|
|
u8 pps26_reserved;
|
|
/**
|
|
* @first_line_bpg_offset:
|
|
* PPS27[4:0] - Number of additional bits that are allocated
|
|
* for each group on first line of a slice.
|
|
* PPS27[7:5] - Reserved
|
|
*/
|
|
u8 first_line_bpg_offset;
|
|
/**
|
|
* @nfl_bpg_offset:
|
|
* PPS28[7:0], PPS29[7:0] - Number of bits including frac bits
|
|
* deallocated for each group for groups after the first line of slice.
|
|
*/
|
|
__be16 nfl_bpg_offset;
|
|
/**
|
|
* @slice_bpg_offset:
|
|
* PPS30, PPS31[7:0] - Number of bits that are deallocated for each
|
|
* group to enforce the slice constraint.
|
|
*/
|
|
__be16 slice_bpg_offset;
|
|
/**
|
|
* @initial_offset:
|
|
* PPS32,33[7:0] - Initial value for rcXformOffset
|
|
*/
|
|
__be16 initial_offset;
|
|
/**
|
|
* @final_offset:
|
|
* PPS34,35[7:0] - Maximum end-of-slice value for rcXformOffset
|
|
*/
|
|
__be16 final_offset;
|
|
/**
|
|
* @flatness_min_qp:
|
|
* PPS36[4:0] - Minimum QP at which flatness is signaled and
|
|
* flatness QP adjustment is made.
|
|
* PPS36[7:5] - Reserved
|
|
*/
|
|
u8 flatness_min_qp;
|
|
/**
|
|
* @flatness_max_qp:
|
|
* PPS37[4:0] - Max QP at which flatness is signalled and
|
|
* the flatness adjustment is made.
|
|
* PPS37[7:5] - Reserved
|
|
*/
|
|
u8 flatness_max_qp;
|
|
/**
|
|
* @rc_model_size:
|
|
* PPS38,39[7:0] - Number of bits within RC Model.
|
|
*/
|
|
__be16 rc_model_size;
|
|
/**
|
|
* @rc_edge_factor:
|
|
* PPS40[3:0] - Ratio of current activity vs, previous
|
|
* activity to determine presence of edge.
|
|
* PPS40[7:4] - Reserved
|
|
*/
|
|
u8 rc_edge_factor;
|
|
/**
|
|
* @rc_quant_incr_limit0:
|
|
* PPS41[4:0] - QP threshold used in short term RC
|
|
* PPS41[7:5] - Reserved
|
|
*/
|
|
u8 rc_quant_incr_limit0;
|
|
/**
|
|
* @rc_quant_incr_limit1:
|
|
* PPS42[4:0] - QP threshold used in short term RC
|
|
* PPS42[7:5] - Reserved
|
|
*/
|
|
u8 rc_quant_incr_limit1;
|
|
/**
|
|
* @rc_tgt_offset:
|
|
* PPS43[3:0] - Lower end of the variability range around the target
|
|
* bits per group that is allowed by short term RC.
|
|
* PPS43[7:4]- Upper end of the variability range around the target
|
|
* bits per group that i allowed by short term rc.
|
|
*/
|
|
u8 rc_tgt_offset;
|
|
/**
|
|
* @rc_buf_thresh:
|
|
* PPS44[7:0] - PPS57[7:0] - Specifies the thresholds in RC model for
|
|
* the 15 ranges defined by 14 thresholds.
|
|
*/
|
|
u8 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
|
|
/**
|
|
* @rc_range_parameters:
|
|
* PPS58[7:0] - PPS87[7:0]
|
|
* Parameters that correspond to each of the 15 ranges.
|
|
*/
|
|
__be16 rc_range_parameters[DSC_NUM_BUF_RANGES];
|
|
/**
|
|
* @native_422_420:
|
|
* PPS88[0] - 0 = Native 4:2:2 not used
|
|
* 1 = Native 4:2:2 used
|
|
* PPS88[1] - 0 = Native 4:2:0 not use
|
|
* 1 = Native 4:2:0 used
|
|
* PPS88[7:2] - Reserved 6 bits
|
|
*/
|
|
u8 native_422_420;
|
|
/**
|
|
* @second_line_bpg_offset:
|
|
* PPS89[4:0] - Additional bits/group budget for the
|
|
* second line of a slice in Native 4:2:0 mode.
|
|
* Set to 0 if DSC minor version is 1 or native420 is 0.
|
|
* PPS89[7:5] - Reserved
|
|
*/
|
|
u8 second_line_bpg_offset;
|
|
/**
|
|
* @nsl_bpg_offset:
|
|
* PPS90[7:0], PPS91[7:0] - Number of bits that are deallocated
|
|
* for each group that is not in the second line of a slice.
|
|
*/
|
|
__be16 nsl_bpg_offset;
|
|
/**
|
|
* @second_line_offset_adj:
|
|
* PPS92[7:0], PPS93[7:0] - Used as offset adjustment for the second
|
|
* line in Native 4:2:0 mode.
|
|
*/
|
|
__be16 second_line_offset_adj;
|
|
/**
|
|
* @pps_long_94_reserved:
|
|
* PPS 94, 95, 96, 97 - Reserved
|
|
*/
|
|
u32 pps_long_94_reserved;
|
|
/**
|
|
* @pps_long_98_reserved:
|
|
* PPS 98, 99, 100, 101 - Reserved
|
|
*/
|
|
u32 pps_long_98_reserved;
|
|
/**
|
|
* @pps_long_102_reserved:
|
|
* PPS 102, 103, 104, 105 - Reserved
|
|
*/
|
|
u32 pps_long_102_reserved;
|
|
/**
|
|
* @pps_long_106_reserved:
|
|
* PPS 106, 107, 108, 109 - reserved
|
|
*/
|
|
u32 pps_long_106_reserved;
|
|
/**
|
|
* @pps_long_110_reserved:
|
|
* PPS 110, 111, 112, 113 - reserved
|
|
*/
|
|
u32 pps_long_110_reserved;
|
|
/**
|
|
* @pps_long_114_reserved:
|
|
* PPS 114 - 117 - reserved
|
|
*/
|
|
u32 pps_long_114_reserved;
|
|
/**
|
|
* @pps_long_118_reserved:
|
|
* PPS 118 - 121 - reserved
|
|
*/
|
|
u32 pps_long_118_reserved;
|
|
/**
|
|
* @pps_long_122_reserved:
|
|
* PPS 122- 125 - reserved
|
|
*/
|
|
u32 pps_long_122_reserved;
|
|
/**
|
|
* @pps_short_126_reserved:
|
|
* PPS 126, 127 - reserved
|
|
*/
|
|
__be16 pps_short_126_reserved;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct drm_dsc_pps_infoframe - DSC infoframe carrying the Picture Parameter
|
|
* Set Metadata
|
|
*
|
|
* This structure represents the DSC PPS infoframe required to send the Picture
|
|
* Parameter Set metadata required before enabling VESA Display Stream
|
|
* Compression. This is based on the DP Secondary Data Packet structure and
|
|
* comprises of SDP Header as defined &struct dp_sdp_header in drm_dp_helper.h
|
|
* and PPS payload defined in &struct drm_dsc_picture_parameter_set.
|
|
*
|
|
* @pps_header: Header for PPS as per DP SDP header format of type
|
|
* &struct dp_sdp_header
|
|
* @pps_payload: PPS payload fields as per DSC specification Table 4-1
|
|
* as represented in &struct drm_dsc_picture_parameter_set
|
|
*/
|
|
struct drm_dsc_pps_infoframe {
|
|
struct dp_sdp_header pps_header;
|
|
struct drm_dsc_picture_parameter_set pps_payload;
|
|
} __packed;
|
|
|
|
void drm_dsc_dp_pps_header_init(struct dp_sdp_header *pps_header);
|
|
int drm_dsc_dp_rc_buffer_size(u8 rc_buffer_block_size, u8 rc_buffer_size);
|
|
void drm_dsc_pps_payload_pack(struct drm_dsc_picture_parameter_set *pps_sdp,
|
|
const struct drm_dsc_config *dsc_cfg);
|
|
int drm_dsc_compute_rc_parameters(struct drm_dsc_config *vdsc_cfg);
|
|
|
|
#endif /* _DRM_DSC_H_ */
|