mirror of https://gitee.com/openkylin/linux.git
45 lines
1.6 KiB
Plaintext
45 lines
1.6 KiB
Plaintext
* AMD 10GbE PHY driver (amd-xgbe-phy)
|
|
|
|
Required properties:
|
|
- compatible: Should be "amd,xgbe-phy-seattle-v1a" and
|
|
"ethernet-phy-ieee802.3-c45"
|
|
- reg: Address and length of the register sets for the device
|
|
- SerDes Rx/Tx registers
|
|
- SerDes integration registers (1/2)
|
|
- SerDes integration registers (2/2)
|
|
- interrupt-parent: Should be the phandle for the interrupt controller
|
|
that services interrupts for this device
|
|
- interrupts: Should contain the amd-xgbe-phy interrupt.
|
|
|
|
Optional properties:
|
|
- amd,speed-set: Speed capabilities of the device
|
|
0 - 1GbE and 10GbE (default)
|
|
1 - 2.5GbE and 10GbE
|
|
|
|
The following optional properties are represented by an array with each
|
|
value corresponding to a particular speed. The first array value represents
|
|
the setting for the 1GbE speed, the second value for the 2.5GbE speed and
|
|
the third value for the 10GbE speed. All three values are required if the
|
|
property is used.
|
|
- amd,serdes-blwc: Baseline wandering correction enablement
|
|
0 - Off
|
|
1 - On
|
|
- amd,serdes-cdr-rate: CDR rate speed selection
|
|
- amd,serdes-pq-skew: PQ (data sampling) skew
|
|
- amd,serdes-tx-amp: TX amplitude boost
|
|
|
|
Example:
|
|
xgbe_phy@e1240800 {
|
|
compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
|
|
reg = <0 0xe1240800 0 0x00400>,
|
|
<0 0xe1250000 0 0x00060>,
|
|
<0 0xe1250080 0 0x00004>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 323 4>;
|
|
amd,speed-set = <0>;
|
|
amd,serdes-blwc = <1>, <1>, <0>;
|
|
amd,serdes-cdr-rate = <2>, <2>, <7>;
|
|
amd,serdes-pq-skew = <10>, <10>, <30>;
|
|
amd,serdes-tx-amp = <15>, <15>, <10>;
|
|
};
|