linux/drivers/scsi/isci/host.h

543 lines
16 KiB
C

/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _SCI_HOST_H_
#define _SCI_HOST_H_
#include "remote_device.h"
#include "phy.h"
#include "isci.h"
#include "remote_node_table.h"
#include "registers.h"
#include "unsolicited_frame_control.h"
#include "probe_roms.h"
struct isci_request;
struct scu_task_context;
/**
* struct sci_power_control -
*
* This structure defines the fields for managing power control for direct
* attached disk devices.
*/
struct sci_power_control {
/**
* This field is set when the power control timer is running and cleared when
* it is not.
*/
bool timer_started;
/**
* Timer to control when the directed attached disks can consume power.
*/
struct sci_timer timer;
/**
* This field is used to keep track of how many phys are put into the
* requesters field.
*/
u8 phys_waiting;
/**
* This field is used to keep track of how many phys have been granted to consume power
*/
u8 phys_granted_power;
/**
* This field is an array of phys that we are waiting on. The phys are direct
* mapped into requesters via struct sci_phy.phy_index
*/
struct isci_phy *requesters[SCI_MAX_PHYS];
};
struct sci_port_configuration_agent;
typedef void (*port_config_fn)(struct isci_host *,
struct sci_port_configuration_agent *,
struct isci_port *, struct isci_phy *);
struct sci_port_configuration_agent {
u16 phy_configured_mask;
u16 phy_ready_mask;
struct {
u8 min_index;
u8 max_index;
} phy_valid_port_range[SCI_MAX_PHYS];
bool timer_pending;
port_config_fn link_up_handler;
port_config_fn link_down_handler;
struct sci_timer timer;
};
/**
* isci_host - primary host/controller object
* @timer: timeout start/stop operations
* @device_table: rni (hw remote node index) to remote device lookup table
* @available_remote_nodes: rni allocator
* @power_control: manage device spin up
* @io_request_sequence: generation number for tci's (task contexts)
* @task_context_table: hw task context table
* @remote_node_context_table: hw remote node context table
* @completion_queue: hw-producer driver-consumer communication ring
* @completion_queue_get: tracks the driver 'head' of the ring to notify hw
* @logical_port_entries: min({driver|silicon}-supported-port-count)
* @remote_node_entries: min({driver|silicon}-supported-node-count)
* @task_context_entries: min({driver|silicon}-supported-task-count)
* @phy_timer: phy startup timer
* @invalid_phy_mask: if an invalid_link_up notification is reported a bit for
* the phy index is set so further notifications are not
* made. Once the phy reports link up and is made part of a
* port then this bit is cleared.
*/
struct isci_host {
struct sci_base_state_machine sm;
/* XXX can we time this externally */
struct sci_timer timer;
/* XXX drop reference module params directly */
struct sci_user_parameters user_parameters;
/* XXX no need to be a union */
struct sci_oem_params oem_parameters;
struct sci_port_configuration_agent port_agent;
struct isci_remote_device *device_table[SCI_MAX_REMOTE_DEVICES];
struct sci_remote_node_table available_remote_nodes;
struct sci_power_control power_control;
u8 io_request_sequence[SCI_MAX_IO_REQUESTS];
struct scu_task_context *task_context_table;
dma_addr_t task_context_dma;
union scu_remote_node_context *remote_node_context_table;
u32 *completion_queue;
u32 completion_queue_get;
u32 logical_port_entries;
u32 remote_node_entries;
u32 task_context_entries;
struct sci_unsolicited_frame_control uf_control;
/* phy startup */
struct sci_timer phy_timer;
/* XXX kill */
bool phy_startup_timer_pending;
u32 next_phy_to_start;
/* XXX convert to unsigned long and use bitops */
u8 invalid_phy_mask;
/* TODO attempt dynamic interrupt coalescing scheme */
u16 interrupt_coalesce_number;
u32 interrupt_coalesce_timeout;
struct smu_registers __iomem *smu_registers;
struct scu_registers __iomem *scu_registers;
u16 tci_head;
u16 tci_tail;
u16 tci_pool[SCI_MAX_IO_REQUESTS];
int id; /* unique within a given pci device */
struct isci_phy phys[SCI_MAX_PHYS];
struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */
struct sas_ha_struct sas_ha;
spinlock_t state_lock;
struct pci_dev *pdev;
enum isci_status status;
#define IHOST_START_PENDING 0
#define IHOST_STOP_PENDING 1
unsigned long flags;
wait_queue_head_t eventq;
struct Scsi_Host *shost;
struct tasklet_struct completion_tasklet;
struct list_head requests_to_complete;
struct list_head requests_to_errorback;
spinlock_t scic_lock;
struct isci_request *reqs[SCI_MAX_IO_REQUESTS];
struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES];
};
/**
* enum sci_controller_states - This enumeration depicts all the states
* for the common controller state machine.
*/
enum sci_controller_states {
/**
* Simply the initial state for the base controller state machine.
*/
SCIC_INITIAL = 0,
/**
* This state indicates that the controller is reset. The memory for
* the controller is in it's initial state, but the controller requires
* initialization.
* This state is entered from the INITIAL state.
* This state is entered from the RESETTING state.
*/
SCIC_RESET,
/**
* This state is typically an action state that indicates the controller
* is in the process of initialization. In this state no new IO operations
* are permitted.
* This state is entered from the RESET state.
*/
SCIC_INITIALIZING,
/**
* This state indicates that the controller has been successfully
* initialized. In this state no new IO operations are permitted.
* This state is entered from the INITIALIZING state.
*/
SCIC_INITIALIZED,
/**
* This state indicates the the controller is in the process of becoming
* ready (i.e. starting). In this state no new IO operations are permitted.
* This state is entered from the INITIALIZED state.
*/
SCIC_STARTING,
/**
* This state indicates the controller is now ready. Thus, the user
* is able to perform IO operations on the controller.
* This state is entered from the STARTING state.
*/
SCIC_READY,
/**
* This state is typically an action state that indicates the controller
* is in the process of resetting. Thus, the user is unable to perform
* IO operations on the controller. A reset is considered destructive in
* most cases.
* This state is entered from the READY state.
* This state is entered from the FAILED state.
* This state is entered from the STOPPED state.
*/
SCIC_RESETTING,
/**
* This state indicates that the controller is in the process of stopping.
* In this state no new IO operations are permitted, but existing IO
* operations are allowed to complete.
* This state is entered from the READY state.
*/
SCIC_STOPPING,
/**
* This state indicates that the controller has successfully been stopped.
* In this state no new IO operations are permitted.
* This state is entered from the STOPPING state.
*/
SCIC_STOPPED,
/**
* This state indicates that the controller could not successfully be
* initialized. In this state no new IO operations are permitted.
* This state is entered from the INITIALIZING state.
* This state is entered from the STARTING state.
* This state is entered from the STOPPING state.
* This state is entered from the RESETTING state.
*/
SCIC_FAILED,
};
/**
* struct isci_pci_info - This class represents the pci function containing the
* controllers. Depending on PCI SKU, there could be up to 2 controllers in
* the PCI function.
*/
#define SCI_MAX_MSIX_INT (SCI_NUM_MSI_X_INT*SCI_MAX_CONTROLLERS)
struct isci_pci_info {
struct msix_entry msix_entries[SCI_MAX_MSIX_INT];
struct isci_host *hosts[SCI_MAX_CONTROLLERS];
struct isci_orom *orom;
};
static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev)
{
return pci_get_drvdata(pdev);
}
#define for_each_isci_host(id, ihost, pdev) \
for (id = 0, ihost = to_pci_info(pdev)->hosts[id]; \
id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \
ihost = to_pci_info(pdev)->hosts[++id])
static inline enum isci_status isci_host_get_state(struct isci_host *isci_host)
{
return isci_host->status;
}
static inline void isci_host_change_state(struct isci_host *isci_host,
enum isci_status status)
{
unsigned long flags;
dev_dbg(&isci_host->pdev->dev,
"%s: isci_host = %p, state = 0x%x",
__func__,
isci_host,
status);
spin_lock_irqsave(&isci_host->state_lock, flags);
isci_host->status = status;
spin_unlock_irqrestore(&isci_host->state_lock, flags);
}
static inline void wait_for_start(struct isci_host *ihost)
{
wait_event(ihost->eventq, !test_bit(IHOST_START_PENDING, &ihost->flags));
}
static inline void wait_for_stop(struct isci_host *ihost)
{
wait_event(ihost->eventq, !test_bit(IHOST_STOP_PENDING, &ihost->flags));
}
static inline void wait_for_device_start(struct isci_host *ihost, struct isci_remote_device *idev)
{
wait_event(ihost->eventq, !test_bit(IDEV_START_PENDING, &idev->flags));
}
static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_remote_device *idev)
{
wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags));
}
static inline struct isci_host *dev_to_ihost(struct domain_device *dev)
{
return dev->port->ha->lldd_ha;
}
/* we always use protocol engine group zero */
#define ISCI_PEG 0
/* see sci_controller_io_tag_allocate|free for how seq and tci are built */
#define ISCI_TAG(seq, tci) (((u16) (seq)) << 12 | tci)
/* these are returned by the hardware, so sanitize them */
#define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1))
#define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1))
/* expander attached sata devices require 3 rnc slots */
static inline int sci_remote_device_node_count(struct isci_remote_device *idev)
{
struct domain_device *dev = idev->domain_dev;
if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) &&
!idev->is_direct_attached)
return SCU_STP_REMOTE_NODE_COUNT;
return SCU_SSP_REMOTE_NODE_COUNT;
}
/**
* sci_controller_clear_invalid_phy() -
*
* This macro will clear the bit in the invalid phy mask for this controller
* object. This is used to control messages reported for invalid link up
* notifications.
*/
#define sci_controller_clear_invalid_phy(controller, phy) \
((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index))
static inline struct device *sciphy_to_dev(struct isci_phy *iphy)
{
if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host)
return NULL;
return &iphy->isci_port->isci_host->pdev->dev;
}
static inline struct device *sciport_to_dev(struct isci_port *iport)
{
if (!iport || !iport->isci_host)
return NULL;
return &iport->isci_host->pdev->dev;
}
static inline struct device *scirdev_to_dev(struct isci_remote_device *idev)
{
if (!idev || !idev->isci_port || !idev->isci_port->isci_host)
return NULL;
return &idev->isci_port->isci_host->pdev->dev;
}
static inline bool is_a2(struct pci_dev *pdev)
{
if (pdev->revision < 4)
return true;
return false;
}
static inline bool is_b0(struct pci_dev *pdev)
{
if (pdev->revision == 4)
return true;
return false;
}
static inline bool is_c0(struct pci_dev *pdev)
{
if (pdev->revision >= 5)
return true;
return false;
}
void sci_controller_post_request(struct isci_host *ihost,
u32 request);
void sci_controller_release_frame(struct isci_host *ihost,
u32 frame_index);
void sci_controller_copy_sata_response(void *response_buffer,
void *frame_header,
void *frame_buffer);
enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost,
struct isci_remote_device *idev,
u16 *node_id);
void sci_controller_free_remote_node_context(
struct isci_host *ihost,
struct isci_remote_device *idev,
u16 node_id);
struct isci_request *sci_request_by_tag(struct isci_host *ihost,
u16 io_tag);
void sci_controller_power_control_queue_insert(
struct isci_host *ihost,
struct isci_phy *iphy);
void sci_controller_power_control_queue_remove(
struct isci_host *ihost,
struct isci_phy *iphy);
void sci_controller_link_up(
struct isci_host *ihost,
struct isci_port *iport,
struct isci_phy *iphy);
void sci_controller_link_down(
struct isci_host *ihost,
struct isci_port *iport,
struct isci_phy *iphy);
void sci_controller_remote_device_stopped(
struct isci_host *ihost,
struct isci_remote_device *idev);
void sci_controller_copy_task_context(
struct isci_host *ihost,
struct isci_request *ireq);
void sci_controller_register_setup(struct isci_host *ihost);
enum sci_status sci_controller_continue_io(struct isci_request *ireq);
int isci_host_scan_finished(struct Scsi_Host *, unsigned long);
void isci_host_scan_start(struct Scsi_Host *);
u16 isci_alloc_tag(struct isci_host *ihost);
enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag);
void isci_tci_free(struct isci_host *ihost, u16 tci);
int isci_host_init(struct isci_host *);
void isci_host_init_controller_names(
struct isci_host *isci_host,
unsigned int controller_idx);
void isci_host_deinit(
struct isci_host *);
void isci_host_port_link_up(
struct isci_host *,
struct isci_port *,
struct isci_phy *);
int isci_host_dev_found(struct domain_device *);
void isci_host_remote_device_start_complete(
struct isci_host *,
struct isci_remote_device *,
enum sci_status);
void sci_controller_disable_interrupts(
struct isci_host *ihost);
enum sci_status sci_controller_start_io(
struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_request *ireq);
enum sci_task_status sci_controller_start_task(
struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_request *ireq);
enum sci_status sci_controller_terminate_request(
struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_request *ireq);
enum sci_status sci_controller_complete_io(
struct isci_host *ihost,
struct isci_remote_device *idev,
struct isci_request *ireq);
void sci_port_configuration_agent_construct(
struct sci_port_configuration_agent *port_agent);
enum sci_status sci_port_configuration_agent_initialize(
struct isci_host *ihost,
struct sci_port_configuration_agent *port_agent);
#endif