mirror of https://gitee.com/openkylin/linux.git
372 lines
12 KiB
C
372 lines
12 KiB
C
/*
|
|
* pmbus.h - Common defines and structures for PMBus devices
|
|
*
|
|
* Copyright (c) 2010, 2011 Ericsson AB.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#ifndef PMBUS_H
|
|
#define PMBUS_H
|
|
|
|
/*
|
|
* Registers
|
|
*/
|
|
#define PMBUS_PAGE 0x00
|
|
#define PMBUS_OPERATION 0x01
|
|
#define PMBUS_ON_OFF_CONFIG 0x02
|
|
#define PMBUS_CLEAR_FAULTS 0x03
|
|
#define PMBUS_PHASE 0x04
|
|
|
|
#define PMBUS_CAPABILITY 0x19
|
|
#define PMBUS_QUERY 0x1A
|
|
|
|
#define PMBUS_VOUT_MODE 0x20
|
|
#define PMBUS_VOUT_COMMAND 0x21
|
|
#define PMBUS_VOUT_TRIM 0x22
|
|
#define PMBUS_VOUT_CAL_OFFSET 0x23
|
|
#define PMBUS_VOUT_MAX 0x24
|
|
#define PMBUS_VOUT_MARGIN_HIGH 0x25
|
|
#define PMBUS_VOUT_MARGIN_LOW 0x26
|
|
#define PMBUS_VOUT_TRANSITION_RATE 0x27
|
|
#define PMBUS_VOUT_DROOP 0x28
|
|
#define PMBUS_VOUT_SCALE_LOOP 0x29
|
|
#define PMBUS_VOUT_SCALE_MONITOR 0x2A
|
|
|
|
#define PMBUS_COEFFICIENTS 0x30
|
|
#define PMBUS_POUT_MAX 0x31
|
|
|
|
#define PMBUS_FAN_CONFIG_12 0x3A
|
|
#define PMBUS_FAN_COMMAND_1 0x3B
|
|
#define PMBUS_FAN_COMMAND_2 0x3C
|
|
#define PMBUS_FAN_CONFIG_34 0x3D
|
|
#define PMBUS_FAN_COMMAND_3 0x3E
|
|
#define PMBUS_FAN_COMMAND_4 0x3F
|
|
|
|
#define PMBUS_VOUT_OV_FAULT_LIMIT 0x40
|
|
#define PMBUS_VOUT_OV_FAULT_RESPONSE 0x41
|
|
#define PMBUS_VOUT_OV_WARN_LIMIT 0x42
|
|
#define PMBUS_VOUT_UV_WARN_LIMIT 0x43
|
|
#define PMBUS_VOUT_UV_FAULT_LIMIT 0x44
|
|
#define PMBUS_VOUT_UV_FAULT_RESPONSE 0x45
|
|
#define PMBUS_IOUT_OC_FAULT_LIMIT 0x46
|
|
#define PMBUS_IOUT_OC_FAULT_RESPONSE 0x47
|
|
#define PMBUS_IOUT_OC_LV_FAULT_LIMIT 0x48
|
|
#define PMBUS_IOUT_OC_LV_FAULT_RESPONSE 0x49
|
|
#define PMBUS_IOUT_OC_WARN_LIMIT 0x4A
|
|
#define PMBUS_IOUT_UC_FAULT_LIMIT 0x4B
|
|
#define PMBUS_IOUT_UC_FAULT_RESPONSE 0x4C
|
|
|
|
#define PMBUS_OT_FAULT_LIMIT 0x4F
|
|
#define PMBUS_OT_FAULT_RESPONSE 0x50
|
|
#define PMBUS_OT_WARN_LIMIT 0x51
|
|
#define PMBUS_UT_WARN_LIMIT 0x52
|
|
#define PMBUS_UT_FAULT_LIMIT 0x53
|
|
#define PMBUS_UT_FAULT_RESPONSE 0x54
|
|
#define PMBUS_VIN_OV_FAULT_LIMIT 0x55
|
|
#define PMBUS_VIN_OV_FAULT_RESPONSE 0x56
|
|
#define PMBUS_VIN_OV_WARN_LIMIT 0x57
|
|
#define PMBUS_VIN_UV_WARN_LIMIT 0x58
|
|
#define PMBUS_VIN_UV_FAULT_LIMIT 0x59
|
|
|
|
#define PMBUS_IIN_OC_FAULT_LIMIT 0x5B
|
|
#define PMBUS_IIN_OC_WARN_LIMIT 0x5D
|
|
|
|
#define PMBUS_POUT_OP_FAULT_LIMIT 0x68
|
|
#define PMBUS_POUT_OP_WARN_LIMIT 0x6A
|
|
#define PMBUS_PIN_OP_WARN_LIMIT 0x6B
|
|
|
|
#define PMBUS_STATUS_BYTE 0x78
|
|
#define PMBUS_STATUS_WORD 0x79
|
|
#define PMBUS_STATUS_VOUT 0x7A
|
|
#define PMBUS_STATUS_IOUT 0x7B
|
|
#define PMBUS_STATUS_INPUT 0x7C
|
|
#define PMBUS_STATUS_TEMPERATURE 0x7D
|
|
#define PMBUS_STATUS_CML 0x7E
|
|
#define PMBUS_STATUS_OTHER 0x7F
|
|
#define PMBUS_STATUS_MFR_SPECIFIC 0x80
|
|
#define PMBUS_STATUS_FAN_12 0x81
|
|
#define PMBUS_STATUS_FAN_34 0x82
|
|
|
|
#define PMBUS_READ_VIN 0x88
|
|
#define PMBUS_READ_IIN 0x89
|
|
#define PMBUS_READ_VCAP 0x8A
|
|
#define PMBUS_READ_VOUT 0x8B
|
|
#define PMBUS_READ_IOUT 0x8C
|
|
#define PMBUS_READ_TEMPERATURE_1 0x8D
|
|
#define PMBUS_READ_TEMPERATURE_2 0x8E
|
|
#define PMBUS_READ_TEMPERATURE_3 0x8F
|
|
#define PMBUS_READ_FAN_SPEED_1 0x90
|
|
#define PMBUS_READ_FAN_SPEED_2 0x91
|
|
#define PMBUS_READ_FAN_SPEED_3 0x92
|
|
#define PMBUS_READ_FAN_SPEED_4 0x93
|
|
#define PMBUS_READ_DUTY_CYCLE 0x94
|
|
#define PMBUS_READ_FREQUENCY 0x95
|
|
#define PMBUS_READ_POUT 0x96
|
|
#define PMBUS_READ_PIN 0x97
|
|
|
|
#define PMBUS_REVISION 0x98
|
|
#define PMBUS_MFR_ID 0x99
|
|
#define PMBUS_MFR_MODEL 0x9A
|
|
#define PMBUS_MFR_REVISION 0x9B
|
|
#define PMBUS_MFR_LOCATION 0x9C
|
|
#define PMBUS_MFR_DATE 0x9D
|
|
#define PMBUS_MFR_SERIAL 0x9E
|
|
|
|
/*
|
|
* Virtual registers.
|
|
* Useful to support attributes which are not supported by standard PMBus
|
|
* registers but exist as manufacturer specific registers on individual chips.
|
|
* Must be mapped to real registers in device specific code.
|
|
*
|
|
* Semantics:
|
|
* Virtual registers are all word size.
|
|
* READ registers are read-only; writes are either ignored or return an error.
|
|
* RESET registers are read/write. Reading reset registers returns zero
|
|
* (used for detection), writing any value causes the associated history to be
|
|
* reset.
|
|
* Virtual registers have to be handled in device specific driver code. Chip
|
|
* driver code returns non-negative register values if a virtual register is
|
|
* supported, or a negative error code if not. The chip driver may return
|
|
* -ENODATA or any other error code in this case, though an error code other
|
|
* than -ENODATA is handled more efficiently and thus preferred. Either case,
|
|
* the calling PMBus core code will abort if the chip driver returns an error
|
|
* code when reading or writing virtual registers.
|
|
*/
|
|
#define PMBUS_VIRT_BASE 0x100
|
|
#define PMBUS_VIRT_READ_TEMP_MIN (PMBUS_VIRT_BASE + 0)
|
|
#define PMBUS_VIRT_READ_TEMP_MAX (PMBUS_VIRT_BASE + 1)
|
|
#define PMBUS_VIRT_RESET_TEMP_HISTORY (PMBUS_VIRT_BASE + 2)
|
|
#define PMBUS_VIRT_READ_VIN_AVG (PMBUS_VIRT_BASE + 3)
|
|
#define PMBUS_VIRT_READ_VIN_MIN (PMBUS_VIRT_BASE + 4)
|
|
#define PMBUS_VIRT_READ_VIN_MAX (PMBUS_VIRT_BASE + 5)
|
|
#define PMBUS_VIRT_RESET_VIN_HISTORY (PMBUS_VIRT_BASE + 6)
|
|
#define PMBUS_VIRT_READ_IIN_AVG (PMBUS_VIRT_BASE + 7)
|
|
#define PMBUS_VIRT_READ_IIN_MIN (PMBUS_VIRT_BASE + 8)
|
|
#define PMBUS_VIRT_READ_IIN_MAX (PMBUS_VIRT_BASE + 9)
|
|
#define PMBUS_VIRT_RESET_IIN_HISTORY (PMBUS_VIRT_BASE + 10)
|
|
#define PMBUS_VIRT_READ_PIN_AVG (PMBUS_VIRT_BASE + 11)
|
|
#define PMBUS_VIRT_READ_PIN_MAX (PMBUS_VIRT_BASE + 12)
|
|
#define PMBUS_VIRT_RESET_PIN_HISTORY (PMBUS_VIRT_BASE + 13)
|
|
#define PMBUS_VIRT_READ_VOUT_AVG (PMBUS_VIRT_BASE + 14)
|
|
#define PMBUS_VIRT_READ_VOUT_MIN (PMBUS_VIRT_BASE + 15)
|
|
#define PMBUS_VIRT_READ_VOUT_MAX (PMBUS_VIRT_BASE + 16)
|
|
#define PMBUS_VIRT_RESET_VOUT_HISTORY (PMBUS_VIRT_BASE + 17)
|
|
#define PMBUS_VIRT_READ_IOUT_AVG (PMBUS_VIRT_BASE + 18)
|
|
#define PMBUS_VIRT_READ_IOUT_MIN (PMBUS_VIRT_BASE + 19)
|
|
#define PMBUS_VIRT_READ_IOUT_MAX (PMBUS_VIRT_BASE + 20)
|
|
#define PMBUS_VIRT_RESET_IOUT_HISTORY (PMBUS_VIRT_BASE + 21)
|
|
#define PMBUS_VIRT_READ_TEMP2_MIN (PMBUS_VIRT_BASE + 22)
|
|
#define PMBUS_VIRT_READ_TEMP2_MAX (PMBUS_VIRT_BASE + 23)
|
|
#define PMBUS_VIRT_RESET_TEMP2_HISTORY (PMBUS_VIRT_BASE + 24)
|
|
|
|
/*
|
|
* CAPABILITY
|
|
*/
|
|
#define PB_CAPABILITY_SMBALERT (1<<4)
|
|
#define PB_CAPABILITY_ERROR_CHECK (1<<7)
|
|
|
|
/*
|
|
* VOUT_MODE
|
|
*/
|
|
#define PB_VOUT_MODE_MODE_MASK 0xe0
|
|
#define PB_VOUT_MODE_PARAM_MASK 0x1f
|
|
|
|
#define PB_VOUT_MODE_LINEAR 0x00
|
|
#define PB_VOUT_MODE_VID 0x20
|
|
#define PB_VOUT_MODE_DIRECT 0x40
|
|
|
|
/*
|
|
* Fan configuration
|
|
*/
|
|
#define PB_FAN_2_PULSE_MASK ((1 << 0) | (1 << 1))
|
|
#define PB_FAN_2_RPM (1 << 2)
|
|
#define PB_FAN_2_INSTALLED (1 << 3)
|
|
#define PB_FAN_1_PULSE_MASK ((1 << 4) | (1 << 5))
|
|
#define PB_FAN_1_RPM (1 << 6)
|
|
#define PB_FAN_1_INSTALLED (1 << 7)
|
|
|
|
/*
|
|
* STATUS_BYTE, STATUS_WORD (lower)
|
|
*/
|
|
#define PB_STATUS_NONE_ABOVE (1<<0)
|
|
#define PB_STATUS_CML (1<<1)
|
|
#define PB_STATUS_TEMPERATURE (1<<2)
|
|
#define PB_STATUS_VIN_UV (1<<3)
|
|
#define PB_STATUS_IOUT_OC (1<<4)
|
|
#define PB_STATUS_VOUT_OV (1<<5)
|
|
#define PB_STATUS_OFF (1<<6)
|
|
#define PB_STATUS_BUSY (1<<7)
|
|
|
|
/*
|
|
* STATUS_WORD (upper)
|
|
*/
|
|
#define PB_STATUS_UNKNOWN (1<<8)
|
|
#define PB_STATUS_OTHER (1<<9)
|
|
#define PB_STATUS_FANS (1<<10)
|
|
#define PB_STATUS_POWER_GOOD_N (1<<11)
|
|
#define PB_STATUS_WORD_MFR (1<<12)
|
|
#define PB_STATUS_INPUT (1<<13)
|
|
#define PB_STATUS_IOUT_POUT (1<<14)
|
|
#define PB_STATUS_VOUT (1<<15)
|
|
|
|
/*
|
|
* STATUS_IOUT
|
|
*/
|
|
#define PB_POUT_OP_WARNING (1<<0)
|
|
#define PB_POUT_OP_FAULT (1<<1)
|
|
#define PB_POWER_LIMITING (1<<2)
|
|
#define PB_CURRENT_SHARE_FAULT (1<<3)
|
|
#define PB_IOUT_UC_FAULT (1<<4)
|
|
#define PB_IOUT_OC_WARNING (1<<5)
|
|
#define PB_IOUT_OC_LV_FAULT (1<<6)
|
|
#define PB_IOUT_OC_FAULT (1<<7)
|
|
|
|
/*
|
|
* STATUS_VOUT, STATUS_INPUT
|
|
*/
|
|
#define PB_VOLTAGE_UV_FAULT (1<<4)
|
|
#define PB_VOLTAGE_UV_WARNING (1<<5)
|
|
#define PB_VOLTAGE_OV_WARNING (1<<6)
|
|
#define PB_VOLTAGE_OV_FAULT (1<<7)
|
|
|
|
/*
|
|
* STATUS_INPUT
|
|
*/
|
|
#define PB_PIN_OP_WARNING (1<<0)
|
|
#define PB_IIN_OC_WARNING (1<<1)
|
|
#define PB_IIN_OC_FAULT (1<<2)
|
|
|
|
/*
|
|
* STATUS_TEMPERATURE
|
|
*/
|
|
#define PB_TEMP_UT_FAULT (1<<4)
|
|
#define PB_TEMP_UT_WARNING (1<<5)
|
|
#define PB_TEMP_OT_WARNING (1<<6)
|
|
#define PB_TEMP_OT_FAULT (1<<7)
|
|
|
|
/*
|
|
* STATUS_FAN
|
|
*/
|
|
#define PB_FAN_AIRFLOW_WARNING (1<<0)
|
|
#define PB_FAN_AIRFLOW_FAULT (1<<1)
|
|
#define PB_FAN_FAN2_SPEED_OVERRIDE (1<<2)
|
|
#define PB_FAN_FAN1_SPEED_OVERRIDE (1<<3)
|
|
#define PB_FAN_FAN2_WARNING (1<<4)
|
|
#define PB_FAN_FAN1_WARNING (1<<5)
|
|
#define PB_FAN_FAN2_FAULT (1<<6)
|
|
#define PB_FAN_FAN1_FAULT (1<<7)
|
|
|
|
/*
|
|
* CML_FAULT_STATUS
|
|
*/
|
|
#define PB_CML_FAULT_OTHER_MEM_LOGIC (1<<0)
|
|
#define PB_CML_FAULT_OTHER_COMM (1<<1)
|
|
#define PB_CML_FAULT_PROCESSOR (1<<3)
|
|
#define PB_CML_FAULT_MEMORY (1<<4)
|
|
#define PB_CML_FAULT_PACKET_ERROR (1<<5)
|
|
#define PB_CML_FAULT_INVALID_DATA (1<<6)
|
|
#define PB_CML_FAULT_INVALID_COMMAND (1<<7)
|
|
|
|
enum pmbus_sensor_classes {
|
|
PSC_VOLTAGE_IN = 0,
|
|
PSC_VOLTAGE_OUT,
|
|
PSC_CURRENT_IN,
|
|
PSC_CURRENT_OUT,
|
|
PSC_POWER,
|
|
PSC_TEMPERATURE,
|
|
PSC_FAN,
|
|
PSC_NUM_CLASSES /* Number of power sensor classes */
|
|
};
|
|
|
|
#define PMBUS_PAGES 32 /* Per PMBus specification */
|
|
|
|
/* Functionality bit mask */
|
|
#define PMBUS_HAVE_VIN (1 << 0)
|
|
#define PMBUS_HAVE_VCAP (1 << 1)
|
|
#define PMBUS_HAVE_VOUT (1 << 2)
|
|
#define PMBUS_HAVE_IIN (1 << 3)
|
|
#define PMBUS_HAVE_IOUT (1 << 4)
|
|
#define PMBUS_HAVE_PIN (1 << 5)
|
|
#define PMBUS_HAVE_POUT (1 << 6)
|
|
#define PMBUS_HAVE_FAN12 (1 << 7)
|
|
#define PMBUS_HAVE_FAN34 (1 << 8)
|
|
#define PMBUS_HAVE_TEMP (1 << 9)
|
|
#define PMBUS_HAVE_TEMP2 (1 << 10)
|
|
#define PMBUS_HAVE_TEMP3 (1 << 11)
|
|
#define PMBUS_HAVE_STATUS_VOUT (1 << 12)
|
|
#define PMBUS_HAVE_STATUS_IOUT (1 << 13)
|
|
#define PMBUS_HAVE_STATUS_INPUT (1 << 14)
|
|
#define PMBUS_HAVE_STATUS_TEMP (1 << 15)
|
|
#define PMBUS_HAVE_STATUS_FAN12 (1 << 16)
|
|
#define PMBUS_HAVE_STATUS_FAN34 (1 << 17)
|
|
|
|
enum pmbus_data_format { linear = 0, direct, vid };
|
|
|
|
struct pmbus_driver_info {
|
|
int pages; /* Total number of pages */
|
|
enum pmbus_data_format format[PSC_NUM_CLASSES];
|
|
/*
|
|
* Support one set of coefficients for each sensor type
|
|
* Used for chips providing data in direct mode.
|
|
*/
|
|
int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */
|
|
int b[PSC_NUM_CLASSES]; /* offset */
|
|
int R[PSC_NUM_CLASSES]; /* exponent */
|
|
|
|
u32 func[PMBUS_PAGES]; /* Functionality, per page */
|
|
/*
|
|
* The following functions map manufacturing specific register values
|
|
* to PMBus standard register values. Specify only if mapping is
|
|
* necessary.
|
|
* Functions return the register value (read) or zero (write) if
|
|
* successful. A return value of -ENODATA indicates that there is no
|
|
* manufacturer specific register, but that a standard PMBus register
|
|
* may exist. Any other negative return value indicates that the
|
|
* register does not exist, and that no attempt should be made to read
|
|
* the standard register.
|
|
*/
|
|
int (*read_byte_data)(struct i2c_client *client, int page, int reg);
|
|
int (*read_word_data)(struct i2c_client *client, int page, int reg);
|
|
int (*write_word_data)(struct i2c_client *client, int page, int reg,
|
|
u16 word);
|
|
int (*write_byte)(struct i2c_client *client, int page, u8 value);
|
|
/*
|
|
* The identify function determines supported PMBus functionality.
|
|
* This function is only necessary if a chip driver supports multiple
|
|
* chips, and the chip functionality is not pre-determined.
|
|
*/
|
|
int (*identify)(struct i2c_client *client,
|
|
struct pmbus_driver_info *info);
|
|
};
|
|
|
|
/* Function declarations */
|
|
|
|
int pmbus_set_page(struct i2c_client *client, u8 page);
|
|
int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg);
|
|
int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word);
|
|
int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
|
|
int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
|
|
void pmbus_clear_faults(struct i2c_client *client);
|
|
bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
|
|
bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
|
|
int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
|
|
struct pmbus_driver_info *info);
|
|
void pmbus_do_remove(struct i2c_client *client);
|
|
const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client
|
|
*client);
|
|
|
|
#endif /* PMBUS_H */
|