openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/net/wireless/wl12xx
History
Grazvydas Ignotas a02a295680 wl1251: add support for dedicated IRQ line 
wl1251 has WLAN_IRQ pin for generating interrupts to host processor,
which is mandatory in SPI mode and optional in SDIO mode (which can
use SDIO interrupts instead). However TI recommends using deditated
IRQ line for SDIO too.

Add support for using dedicated interrupt line with SDIO, but also leave
ability to switch to SDIO interrupts in case it's needed.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
 		2010-04-16 15:47:14 -04:00
..
Kconfig wl1271: Changed wl1271_sdio to be selectable only on ARM 2010-03-10 17:44:43 -05:00
Makefile wl1271: Initial SDIO implementation 2010-03-09 15:02:59 -05:00
wl12xx_80211.h wl1271: fix endianess issues 2009-10-27 16:48:19 -04:00
wl1251.h wl1251: fix ELP_CTRL register accesses when using SDIO 2010-03-15 15:32:03 -04:00
wl1251_acx.c wl1251: implement wl1251_acx_tid_cfg() 2009-12-21 18:55:57 -05:00
wl1251_acx.h wl1251: implement wl1251_acx_tid_cfg() 2009-12-21 18:55:57 -05:00
wl1251_boot.c wl1251: reduce eeprom read wait time 2010-03-15 15:32:04 -04:00
wl1251_boot.h wl1251: remove wl1251_ops 2009-08-14 09:13:38 -04:00
wl1251_cmd.c wl1251: use mac80211 provided channel parameters in scanning 2010-01-12 13:51:26 -05:00
wl1251_cmd.h wl1251: use mac80211 provided channel parameters in scanning 2010-01-12 13:51:26 -05:00
wl1251_debugfs.c wl1251: fix potential crash 2010-03-16 15:20:25 -04:00
wl1251_debugfs.h
…
wl1251_event.c wl1251: Increase the beacon loss timeout value and handle regain event 2009-11-18 17:09:22 -05:00
wl1251_event.h
…
wl1251_init.c wl1251: implement acx_ac_cfg to configure hardware queues 2009-12-21 18:55:55 -05:00
wl1251_init.h wl1251: implement acx_ac_cfg to configure hardware queues 2009-12-21 18:55:55 -05:00
wl1251_io.c wl1251: rename reg.h to wl1251_reg.h 2009-08-14 09:13:41 -04:00
wl1251_io.h wl1251: fix ELP_CTRL register accesses when using SDIO 2010-03-15 15:32:03 -04:00
wl1251_main.c wl1251: read default MAC address from EEPROM when available 2010-04-16 15:32:00 -04:00
wl1251_ps.c wl1251: fix ELP_CTRL register accesses when using SDIO 2010-03-15 15:32:03 -04:00
wl1251_ps.h wl1251: Implement delayed entry into ELP mode 2009-11-18 17:09:20 -05:00
wl1251_reg.h wl1251: read default MAC address from EEPROM when available 2010-04-16 15:32:00 -04:00
wl1251_rx.c wl1251: use __dev_alloc_skb() on RX 2009-12-21 18:55:54 -05:00
wl1251_rx.h wl12xx: fix spelling 2009-07-24 15:05:26 -04:00
wl1251_sdio.c wl1251: add support for dedicated IRQ line 2010-04-16 15:47:14 -04:00
wl1251_spi.c wl1251: use DRIVER_NAME macro in wl1251_spi_driver 2010-04-07 14:37:54 -04:00
wl1251_spi.h wl1251: rename reg.h to wl1251_reg.h 2009-08-14 09:13:41 -04:00
wl1251_tx.c wl1251: update tx_hdr when aliging skb in tx 2009-12-21 18:56:00 -05:00
wl1251_tx.h wl1251: enable WMM 2009-12-21 18:56:02 -05:00
wl1271.h wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_acx.c wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_acx.h wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_boot.c wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_boot.h wl1271: Configure clock-request drive mode to open-drain 2010-03-31 14:39:12 -04:00
wl1271_cmd.c wl1271: Configure rates for templates 2010-04-06 16:55:13 -04:00
wl1271_cmd.h wl1271: Configure rates for templates 2010-04-06 16:55:13 -04:00
wl1271_conf.h wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_debugfs.c wl1271: Cleaned up wlan power on/off functions 2010-03-23 16:50:18 -04:00
wl1271_debugfs.h wl1271: add wl1271 driver files 2009-08-14 09:12:46 -04:00
wl1271_event.c wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_event.h wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_init.c wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_init.h wl1271: add most of the normal initialization commands to PLT mode 2010-02-19 15:52:44 -05:00
wl1271_io.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_io.h wl1271: Changed platform_device to be dynamically allocated 2010-03-23 16:50:25 -04:00
wl1271_main.c wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_ps.c wl1271: Go to ELP in idle 2010-04-09 13:43:10 -04:00
wl1271_ps.h wl1271: Fix PSM entry 2010-02-19 15:52:42 -05:00
wl1271_reg.h wl1271: remove unused flags 2010-01-14 18:16:54 -05:00
wl1271_rx.c wl1271: remove deprecated usage of RX status noise 2010-03-31 14:39:14 -04:00
wl1271_rx.h wl1271: Clean up RX rate reporting 2010-03-31 14:39:11 -04:00
wl1271_sdio.c wl1271: fix sdio driver name in wl1271_sdio_driver 2010-04-06 16:55:11 -04:00
wl1271_spi.c wl1271: Update busyword checking mechanism 2010-03-31 14:39:13 -04:00
wl1271_testmode.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_testmode.h wl1271: add testmode support 2010-02-19 15:52:47 -05:00
wl1271_tx.c wl1271: Fix tx queue flushing 2010-04-06 16:55:14 -04:00
wl1271_tx.h wl1271: Use minimum rate for each band for control messages 2010-04-06 16:55:12 -04:00