mirror of https://gitee.com/openkylin/linux.git
396 lines
8.9 KiB
C
396 lines
8.9 KiB
C
/***************************************************************************/
|
|
|
|
/*
|
|
* linux/arch/m68knommu/platform/528x/config.c
|
|
*
|
|
* Sub-architcture dependant initialization code for the Motorola
|
|
* 5280 and 5282 CPUs.
|
|
*
|
|
* Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
|
|
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
|
|
*/
|
|
|
|
/***************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/flash.h>
|
|
#include <linux/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfuart.h>
|
|
#include <asm/mcfqspi.h>
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
#include <linux/mtd/partitions.h>
|
|
#endif
|
|
|
|
/***************************************************************************/
|
|
|
|
void coldfire_reset(void);
|
|
static void coldfire_qspi_cs_control(u8 cs, u8 command);
|
|
|
|
/***************************************************************************/
|
|
|
|
#if defined(CONFIG_SPI)
|
|
|
|
#if defined(CONFIG_WILDFIRE)
|
|
#define SPI_NUM_CHIPSELECTS 0x02
|
|
#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */
|
|
#define SPI_CS_MASK 0x18
|
|
|
|
#define FLASH_BLOCKSIZE (1024*64)
|
|
#define FLASH_NUMBLOCKS 16
|
|
#define FLASH_TYPE "m25p80"
|
|
|
|
#define M25P80_CS 0
|
|
#define MMC_CS 1
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
static struct mtd_partition stm25p_partitions[] = {
|
|
/* sflash */
|
|
[0] = {
|
|
.name = "stm25p80",
|
|
.offset = 0x00000000,
|
|
.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
|
|
.mask_flags = 0
|
|
}
|
|
};
|
|
|
|
#endif
|
|
|
|
#elif defined(CONFIG_WILDFIREMOD)
|
|
|
|
#define SPI_NUM_CHIPSELECTS 0x08
|
|
#define SPI_PAR_VAL 0x07 /* Enable DIN, DOUT, CLK */
|
|
#define SPI_CS_MASK 0x78
|
|
|
|
#define FLASH_BLOCKSIZE (1024*64)
|
|
#define FLASH_NUMBLOCKS 64
|
|
#define FLASH_TYPE "m25p32"
|
|
/* Reserve 1M for the kernel parition */
|
|
#define FLASH_KERNEL_SIZE (1024 * 1024)
|
|
|
|
#define M25P80_CS 5
|
|
#define MMC_CS 6
|
|
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
static struct mtd_partition stm25p_partitions[] = {
|
|
/* sflash */
|
|
[0] = {
|
|
.name = "kernel",
|
|
.offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
|
|
.size = FLASH_KERNEL_SIZE,
|
|
.mask_flags = 0
|
|
},
|
|
[1] = {
|
|
.name = "image",
|
|
.offset = 0x00000000,
|
|
.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
|
|
.mask_flags = 0
|
|
},
|
|
[2] = {
|
|
.name = "all",
|
|
.offset = 0x00000000,
|
|
.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
|
|
.mask_flags = 0
|
|
}
|
|
};
|
|
#endif
|
|
|
|
#else
|
|
#define SPI_NUM_CHIPSELECTS 0x04
|
|
#define SPI_PAR_VAL 0x7F /* Enable DIN, DOUT, CLK, CS0 - CS4 */
|
|
#endif
|
|
|
|
#ifdef MMC_CS
|
|
static struct coldfire_spi_chip flash_chip_info = {
|
|
.mode = SPI_MODE_0,
|
|
.bits_per_word = 16,
|
|
.del_cs_to_clk = 17,
|
|
.del_after_trans = 1,
|
|
.void_write_data = 0
|
|
};
|
|
|
|
static struct coldfire_spi_chip mmc_chip_info = {
|
|
.mode = SPI_MODE_0,
|
|
.bits_per_word = 16,
|
|
.del_cs_to_clk = 17,
|
|
.del_after_trans = 1,
|
|
.void_write_data = 0xFFFF
|
|
};
|
|
#endif
|
|
|
|
#ifdef M25P80_CS
|
|
static struct flash_platform_data stm25p80_platform_data = {
|
|
.name = "ST M25P80 SPI Flash chip",
|
|
#ifdef CONFIG_MTD_PARTITIONS
|
|
.parts = stm25p_partitions,
|
|
.nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
|
|
#endif
|
|
.type = FLASH_TYPE
|
|
};
|
|
#endif
|
|
|
|
static struct spi_board_info spi_board_info[] __initdata = {
|
|
#ifdef M25P80_CS
|
|
{
|
|
.modalias = "m25p80",
|
|
.max_speed_hz = 16000000,
|
|
.bus_num = 1,
|
|
.chip_select = M25P80_CS,
|
|
.platform_data = &stm25p80_platform_data,
|
|
.controller_data = &flash_chip_info
|
|
},
|
|
#endif
|
|
#ifdef MMC_CS
|
|
{
|
|
.modalias = "mmc_spi",
|
|
.max_speed_hz = 16000000,
|
|
.bus_num = 1,
|
|
.chip_select = MMC_CS,
|
|
.controller_data = &mmc_chip_info
|
|
}
|
|
#endif
|
|
};
|
|
|
|
static struct coldfire_spi_master coldfire_master_info = {
|
|
.bus_num = 1,
|
|
.num_chipselect = SPI_NUM_CHIPSELECTS,
|
|
.irq_source = MCF5282_QSPI_IRQ_SOURCE,
|
|
.irq_vector = MCF5282_QSPI_IRQ_VECTOR,
|
|
.irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
|
|
.irq_lp = 0x2B, /* Level 5 and Priority 3 */
|
|
.par_val = SPI_PAR_VAL,
|
|
.cs_control = coldfire_qspi_cs_control,
|
|
};
|
|
|
|
static struct resource coldfire_spi_resources[] = {
|
|
[0] = {
|
|
.name = "qspi-par",
|
|
.start = MCF5282_QSPI_PAR,
|
|
.end = MCF5282_QSPI_PAR,
|
|
.flags = IORESOURCE_MEM
|
|
},
|
|
|
|
[1] = {
|
|
.name = "qspi-module",
|
|
.start = MCF5282_QSPI_QMR,
|
|
.end = MCF5282_QSPI_QMR + 0x18,
|
|
.flags = IORESOURCE_MEM
|
|
},
|
|
|
|
[2] = {
|
|
.name = "qspi-int-level",
|
|
.start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
|
|
.end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
|
|
.flags = IORESOURCE_MEM
|
|
},
|
|
|
|
[3] = {
|
|
.name = "qspi-int-mask",
|
|
.start = MCF5282_INTC0 + MCFINTC_IMRL,
|
|
.end = MCF5282_INTC0 + MCFINTC_IMRL,
|
|
.flags = IORESOURCE_MEM
|
|
}
|
|
};
|
|
|
|
static struct platform_device coldfire_spi = {
|
|
.name = "spi_coldfire",
|
|
.id = -1,
|
|
.resource = coldfire_spi_resources,
|
|
.num_resources = ARRAY_SIZE(coldfire_spi_resources),
|
|
.dev = {
|
|
.platform_data = &coldfire_master_info,
|
|
}
|
|
};
|
|
|
|
static void coldfire_qspi_cs_control(u8 cs, u8 command)
|
|
{
|
|
u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
|
|
|
|
#if defined(CONFIG_WILDFIRE)
|
|
u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
|
|
#endif
|
|
#if defined(CONFIG_WILDFIREMOD)
|
|
u8 cs_mask = (cs << 3) & SPI_CS_MASK;
|
|
#endif
|
|
|
|
/*
|
|
* Don't do anything if the chip select is not
|
|
* one of the port qs pins.
|
|
*/
|
|
if (command & QSPI_CS_INIT) {
|
|
#if defined(CONFIG_WILDFIRE)
|
|
MCF5282_GPIO_DDRQS |= cs_bit;
|
|
MCF5282_GPIO_PQSPAR &= ~cs_bit;
|
|
#endif
|
|
|
|
#if defined(CONFIG_WILDFIREMOD)
|
|
MCF5282_GPIO_DDRQS |= SPI_CS_MASK;
|
|
MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
|
|
#endif
|
|
}
|
|
|
|
if (command & QSPI_CS_ASSERT) {
|
|
MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
|
|
MCF5282_GPIO_PORTQS |= cs_mask;
|
|
} else if (command & QSPI_CS_DROP) {
|
|
MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
|
|
}
|
|
}
|
|
|
|
static int __init spi_dev_init(void)
|
|
{
|
|
int retval;
|
|
|
|
retval = platform_device_register(&coldfire_spi);
|
|
if (retval < 0)
|
|
return retval;
|
|
|
|
if (ARRAY_SIZE(spi_board_info))
|
|
retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
|
|
|
|
return retval;
|
|
}
|
|
|
|
#endif /* CONFIG_SPI */
|
|
|
|
/***************************************************************************/
|
|
|
|
static struct mcf_platform_uart m528x_uart_platform[] = {
|
|
{
|
|
.mapbase = MCF_MBAR + MCFUART_BASE1,
|
|
.irq = MCFINT_VECBASE + MCFINT_UART0,
|
|
},
|
|
{
|
|
.mapbase = MCF_MBAR + MCFUART_BASE2,
|
|
.irq = MCFINT_VECBASE + MCFINT_UART0 + 1,
|
|
},
|
|
{
|
|
.mapbase = MCF_MBAR + MCFUART_BASE3,
|
|
.irq = MCFINT_VECBASE + MCFINT_UART0 + 2,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct platform_device m528x_uart = {
|
|
.name = "mcfuart",
|
|
.id = 0,
|
|
.dev.platform_data = m528x_uart_platform,
|
|
};
|
|
|
|
static struct platform_device *m528x_devices[] __initdata = {
|
|
&m528x_uart,
|
|
};
|
|
|
|
/***************************************************************************/
|
|
|
|
#define INTC0 (MCF_MBAR + MCFICM_INTC0)
|
|
|
|
static void __init m528x_uart_init_line(int line, int irq)
|
|
{
|
|
u8 port;
|
|
u32 imr;
|
|
|
|
if ((line < 0) || (line > 2))
|
|
return;
|
|
|
|
/* level 6, line based priority */
|
|
writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
|
|
|
|
imr = readl(INTC0 + MCFINTC_IMRL);
|
|
imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
|
|
writel(imr, INTC0 + MCFINTC_IMRL);
|
|
|
|
/* make sure PUAPAR is set for UART0 and UART1 */
|
|
if (line < 2) {
|
|
port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR);
|
|
port |= (0x03 << (line * 2));
|
|
writeb(port, MCF_MBAR + MCF5282_GPIO_PUAPAR);
|
|
}
|
|
}
|
|
|
|
static void __init m528x_uarts_init(void)
|
|
{
|
|
const int nrlines = ARRAY_SIZE(m528x_uart_platform);
|
|
int line;
|
|
|
|
for (line = 0; (line < nrlines); line++)
|
|
m528x_uart_init_line(line, m528x_uart_platform[line].irq);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
void mcf_disableall(void)
|
|
{
|
|
*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
|
|
*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
void mcf_autovector(unsigned int vec)
|
|
{
|
|
/* Everything is auto-vectored on the 5272 */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
#ifdef CONFIG_WILDFIRE
|
|
void wildfire_halt(void)
|
|
{
|
|
writeb(0, 0x30000007);
|
|
writeb(0x2, 0x30000007);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_WILDFIREMOD
|
|
void wildfiremod_halt(void)
|
|
{
|
|
printk(KERN_INFO "WildFireMod hibernating...\n");
|
|
|
|
/* Set portE.5 to Digital IO */
|
|
MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
|
|
|
|
/* Make portE.5 an output */
|
|
MCF5282_GPIO_DDRE |= (1 << 5);
|
|
|
|
/* Now toggle portE.5 from low to high */
|
|
MCF5282_GPIO_PORTE &= ~(1 << 5);
|
|
MCF5282_GPIO_PORTE |= (1 << 5);
|
|
|
|
printk(KERN_EMERG "Failed to hibernate. Halting!\n");
|
|
}
|
|
#endif
|
|
|
|
void __init config_BSP(char *commandp, int size)
|
|
{
|
|
mcf_disableall();
|
|
|
|
#ifdef CONFIG_WILDFIRE
|
|
mach_halt = wildfire_halt;
|
|
#endif
|
|
#ifdef CONFIG_WILDFIREMOD
|
|
mach_halt = wildfiremod_halt;
|
|
#endif
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static int __init init_BSP(void)
|
|
{
|
|
m528x_uarts_init();
|
|
platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(init_BSP);
|
|
|
|
/***************************************************************************/
|