mirror of https://gitee.com/openkylin/linux.git
536 lines
14 KiB
C
536 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* dwmac-stm32.c - DWMAC Specific Glue layer for STM32 MCU
|
|
*
|
|
* Copyright (C) STMicroelectronics SA 2017
|
|
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_wakeirq.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/stmmac.h>
|
|
|
|
#include "stmmac_platform.h"
|
|
|
|
#define SYSCFG_MCU_ETH_MASK BIT(23)
|
|
#define SYSCFG_MP1_ETH_MASK GENMASK(23, 16)
|
|
#define SYSCFG_PMCCLRR_OFFSET 0x40
|
|
|
|
#define SYSCFG_PMCR_ETH_CLK_SEL BIT(16)
|
|
#define SYSCFG_PMCR_ETH_REF_CLK_SEL BIT(17)
|
|
|
|
/* Ethernet PHY interface selection in register SYSCFG Configuration
|
|
*------------------------------------------
|
|
* src |BIT(23)| BIT(22)| BIT(21)|BIT(20)|
|
|
*------------------------------------------
|
|
* MII | 0 | 0 | 0 | 1 |
|
|
*------------------------------------------
|
|
* GMII | 0 | 0 | 0 | 0 |
|
|
*------------------------------------------
|
|
* RGMII | 0 | 0 | 1 | n/a |
|
|
*------------------------------------------
|
|
* RMII | 1 | 0 | 0 | n/a |
|
|
*------------------------------------------
|
|
*/
|
|
#define SYSCFG_PMCR_ETH_SEL_MII BIT(20)
|
|
#define SYSCFG_PMCR_ETH_SEL_RGMII BIT(21)
|
|
#define SYSCFG_PMCR_ETH_SEL_RMII BIT(23)
|
|
#define SYSCFG_PMCR_ETH_SEL_GMII 0
|
|
#define SYSCFG_MCU_ETH_SEL_MII 0
|
|
#define SYSCFG_MCU_ETH_SEL_RMII 1
|
|
|
|
/* STM32MP1 register definitions
|
|
*
|
|
* Below table summarizes the clock requirement and clock sources for
|
|
* supported phy interface modes.
|
|
* __________________________________________________________________________
|
|
*|PHY_MODE | Normal | PHY wo crystal| PHY wo crystal |No 125Mhz from PHY|
|
|
*| | | 25MHz | 50MHz | |
|
|
* ---------------------------------------------------------------------------
|
|
*| MII | - | eth-ck | n/a | n/a |
|
|
*| | | | | |
|
|
* ---------------------------------------------------------------------------
|
|
*| GMII | - | eth-ck | n/a | n/a |
|
|
*| | | | | |
|
|
* ---------------------------------------------------------------------------
|
|
*| RGMII | - | eth-ck | n/a | eth-ck (no pin) |
|
|
*| | | | | st,eth-clk-sel |
|
|
* ---------------------------------------------------------------------------
|
|
*| RMII | - | eth-ck | eth-ck | n/a |
|
|
*| | | | st,eth-ref-clk-sel | |
|
|
* ---------------------------------------------------------------------------
|
|
*
|
|
* BIT(17) : set this bit in RMII mode when you have PHY without crystal 50MHz
|
|
* BIT(16) : set this bit in GMII/RGMII PHY when you do not want use 125Mhz
|
|
* from PHY
|
|
*-----------------------------------------------------
|
|
* src | BIT(17) | BIT(16) |
|
|
*-----------------------------------------------------
|
|
* MII | n/a | n/a |
|
|
*-----------------------------------------------------
|
|
* GMII | n/a | st,eth-clk-sel |
|
|
*-----------------------------------------------------
|
|
* RGMII | n/a | st,eth-clk-sel |
|
|
*-----------------------------------------------------
|
|
* RMII | st,eth-ref-clk-sel | n/a |
|
|
*-----------------------------------------------------
|
|
*
|
|
*/
|
|
|
|
struct stm32_dwmac {
|
|
struct clk *clk_tx;
|
|
struct clk *clk_rx;
|
|
struct clk *clk_eth_ck;
|
|
struct clk *clk_ethstp;
|
|
struct clk *syscfg_clk;
|
|
int eth_clk_sel_reg;
|
|
int eth_ref_clk_sel_reg;
|
|
int irq_pwr_wakeup;
|
|
u32 mode_reg; /* MAC glue-logic mode register */
|
|
struct regmap *regmap;
|
|
u32 speed;
|
|
const struct stm32_ops *ops;
|
|
struct device *dev;
|
|
};
|
|
|
|
struct stm32_ops {
|
|
int (*set_mode)(struct plat_stmmacenet_data *plat_dat);
|
|
int (*clk_prepare)(struct stm32_dwmac *dwmac, bool prepare);
|
|
int (*suspend)(struct stm32_dwmac *dwmac);
|
|
void (*resume)(struct stm32_dwmac *dwmac);
|
|
int (*parse_data)(struct stm32_dwmac *dwmac,
|
|
struct device *dev);
|
|
u32 syscfg_eth_mask;
|
|
};
|
|
|
|
static int stm32_dwmac_init(struct plat_stmmacenet_data *plat_dat)
|
|
{
|
|
struct stm32_dwmac *dwmac = plat_dat->bsp_priv;
|
|
int ret;
|
|
|
|
if (dwmac->ops->set_mode) {
|
|
ret = dwmac->ops->set_mode(plat_dat);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(dwmac->clk_tx);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!dwmac->dev->power.is_suspended) {
|
|
ret = clk_prepare_enable(dwmac->clk_rx);
|
|
if (ret) {
|
|
clk_disable_unprepare(dwmac->clk_tx);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (dwmac->ops->clk_prepare) {
|
|
ret = dwmac->ops->clk_prepare(dwmac, true);
|
|
if (ret) {
|
|
clk_disable_unprepare(dwmac->clk_rx);
|
|
clk_disable_unprepare(dwmac->clk_tx);
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stm32mp1_clk_prepare(struct stm32_dwmac *dwmac, bool prepare)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (prepare) {
|
|
ret = clk_prepare_enable(dwmac->syscfg_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (dwmac->clk_eth_ck) {
|
|
ret = clk_prepare_enable(dwmac->clk_eth_ck);
|
|
if (ret) {
|
|
clk_disable_unprepare(dwmac->syscfg_clk);
|
|
return ret;
|
|
}
|
|
}
|
|
} else {
|
|
clk_disable_unprepare(dwmac->syscfg_clk);
|
|
if (dwmac->clk_eth_ck)
|
|
clk_disable_unprepare(dwmac->clk_eth_ck);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
|
|
{
|
|
struct stm32_dwmac *dwmac = plat_dat->bsp_priv;
|
|
u32 reg = dwmac->mode_reg;
|
|
int val, ret;
|
|
|
|
switch (plat_dat->interface) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
val = SYSCFG_PMCR_ETH_SEL_MII;
|
|
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
|
|
break;
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
val = SYSCFG_PMCR_ETH_SEL_GMII;
|
|
if (dwmac->eth_clk_sel_reg)
|
|
val |= SYSCFG_PMCR_ETH_CLK_SEL;
|
|
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_GMII\n");
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
val = SYSCFG_PMCR_ETH_SEL_RMII;
|
|
if (dwmac->eth_ref_clk_sel_reg)
|
|
val |= SYSCFG_PMCR_ETH_REF_CLK_SEL;
|
|
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RMII\n");
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
val = SYSCFG_PMCR_ETH_SEL_RGMII;
|
|
if (dwmac->eth_clk_sel_reg)
|
|
val |= SYSCFG_PMCR_ETH_CLK_SEL;
|
|
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RGMII\n");
|
|
break;
|
|
default:
|
|
pr_debug("SYSCFG init : Do not manage %d interface\n",
|
|
plat_dat->interface);
|
|
/* Do not manage others interfaces */
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Need to update PMCCLRR (clear register) */
|
|
ret = regmap_write(dwmac->regmap, reg + SYSCFG_PMCCLRR_OFFSET,
|
|
dwmac->ops->syscfg_eth_mask);
|
|
|
|
/* Update PMCSETR (set register) */
|
|
return regmap_update_bits(dwmac->regmap, reg,
|
|
dwmac->ops->syscfg_eth_mask, val);
|
|
}
|
|
|
|
static int stm32mcu_set_mode(struct plat_stmmacenet_data *plat_dat)
|
|
{
|
|
struct stm32_dwmac *dwmac = plat_dat->bsp_priv;
|
|
u32 reg = dwmac->mode_reg;
|
|
int val;
|
|
|
|
switch (plat_dat->interface) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
val = SYSCFG_MCU_ETH_SEL_MII;
|
|
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
val = SYSCFG_MCU_ETH_SEL_RMII;
|
|
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RMII\n");
|
|
break;
|
|
default:
|
|
pr_debug("SYSCFG init : Do not manage %d interface\n",
|
|
plat_dat->interface);
|
|
/* Do not manage others interfaces */
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(dwmac->regmap, reg,
|
|
dwmac->ops->syscfg_eth_mask, val << 23);
|
|
}
|
|
|
|
static void stm32_dwmac_clk_disable(struct stm32_dwmac *dwmac)
|
|
{
|
|
clk_disable_unprepare(dwmac->clk_tx);
|
|
clk_disable_unprepare(dwmac->clk_rx);
|
|
|
|
if (dwmac->ops->clk_prepare)
|
|
dwmac->ops->clk_prepare(dwmac, false);
|
|
}
|
|
|
|
static int stm32_dwmac_parse_data(struct stm32_dwmac *dwmac,
|
|
struct device *dev)
|
|
{
|
|
struct device_node *np = dev->of_node;
|
|
int err;
|
|
|
|
/* Get TX/RX clocks */
|
|
dwmac->clk_tx = devm_clk_get(dev, "mac-clk-tx");
|
|
if (IS_ERR(dwmac->clk_tx)) {
|
|
dev_err(dev, "No ETH Tx clock provided...\n");
|
|
return PTR_ERR(dwmac->clk_tx);
|
|
}
|
|
|
|
dwmac->clk_rx = devm_clk_get(dev, "mac-clk-rx");
|
|
if (IS_ERR(dwmac->clk_rx)) {
|
|
dev_err(dev, "No ETH Rx clock provided...\n");
|
|
return PTR_ERR(dwmac->clk_rx);
|
|
}
|
|
|
|
if (dwmac->ops->parse_data) {
|
|
err = dwmac->ops->parse_data(dwmac, dev);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
/* Get mode register */
|
|
dwmac->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscon");
|
|
if (IS_ERR(dwmac->regmap))
|
|
return PTR_ERR(dwmac->regmap);
|
|
|
|
err = of_property_read_u32_index(np, "st,syscon", 1, &dwmac->mode_reg);
|
|
if (err)
|
|
dev_err(dev, "Can't get sysconfig mode offset (%d)\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
|
|
struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct device_node *np = dev->of_node;
|
|
int err = 0;
|
|
|
|
/* Gigabit Ethernet 125MHz clock selection. */
|
|
dwmac->eth_clk_sel_reg = of_property_read_bool(np, "st,eth-clk-sel");
|
|
|
|
/* Ethernet 50Mhz RMII clock selection */
|
|
dwmac->eth_ref_clk_sel_reg =
|
|
of_property_read_bool(np, "st,eth-ref-clk-sel");
|
|
|
|
/* Get ETH_CLK clocks */
|
|
dwmac->clk_eth_ck = devm_clk_get(dev, "eth-ck");
|
|
if (IS_ERR(dwmac->clk_eth_ck)) {
|
|
dev_warn(dev, "No phy clock provided...\n");
|
|
dwmac->clk_eth_ck = NULL;
|
|
}
|
|
|
|
/* Clock used for low power mode */
|
|
dwmac->clk_ethstp = devm_clk_get(dev, "ethstp");
|
|
if (IS_ERR(dwmac->clk_ethstp)) {
|
|
dev_err(dev,
|
|
"No ETH peripheral clock provided for CStop mode ...\n");
|
|
return PTR_ERR(dwmac->clk_ethstp);
|
|
}
|
|
|
|
/* Clock for sysconfig */
|
|
dwmac->syscfg_clk = devm_clk_get(dev, "syscfg-clk");
|
|
if (IS_ERR(dwmac->syscfg_clk)) {
|
|
dev_err(dev, "No syscfg clock provided...\n");
|
|
return PTR_ERR(dwmac->syscfg_clk);
|
|
}
|
|
|
|
/* Get IRQ information early to have an ability to ask for deferred
|
|
* probe if needed before we went too far with resource allocation.
|
|
*/
|
|
dwmac->irq_pwr_wakeup = platform_get_irq_byname(pdev,
|
|
"stm32_pwr_wakeup");
|
|
if (dwmac->irq_pwr_wakeup == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
if (!dwmac->clk_eth_ck && dwmac->irq_pwr_wakeup >= 0) {
|
|
err = device_init_wakeup(&pdev->dev, true);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to init wake up irq\n");
|
|
return err;
|
|
}
|
|
err = dev_pm_set_dedicated_wake_irq(&pdev->dev,
|
|
dwmac->irq_pwr_wakeup);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to set wake up irq\n");
|
|
device_init_wakeup(&pdev->dev, false);
|
|
}
|
|
device_set_wakeup_enable(&pdev->dev, false);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int stm32_dwmac_probe(struct platform_device *pdev)
|
|
{
|
|
struct plat_stmmacenet_data *plat_dat;
|
|
struct stmmac_resources stmmac_res;
|
|
struct stm32_dwmac *dwmac;
|
|
const struct stm32_ops *data;
|
|
int ret;
|
|
|
|
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
|
|
if (ret)
|
|
return ret;
|
|
|
|
plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
|
|
if (IS_ERR(plat_dat))
|
|
return PTR_ERR(plat_dat);
|
|
|
|
dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
|
|
if (!dwmac) {
|
|
ret = -ENOMEM;
|
|
goto err_remove_config_dt;
|
|
}
|
|
|
|
data = of_device_get_match_data(&pdev->dev);
|
|
if (!data) {
|
|
dev_err(&pdev->dev, "no of match data provided\n");
|
|
ret = -EINVAL;
|
|
goto err_remove_config_dt;
|
|
}
|
|
|
|
dwmac->ops = data;
|
|
dwmac->dev = &pdev->dev;
|
|
|
|
ret = stm32_dwmac_parse_data(dwmac, &pdev->dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to parse OF data\n");
|
|
goto err_remove_config_dt;
|
|
}
|
|
|
|
plat_dat->bsp_priv = dwmac;
|
|
|
|
ret = stm32_dwmac_init(plat_dat);
|
|
if (ret)
|
|
goto err_remove_config_dt;
|
|
|
|
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
|
|
if (ret)
|
|
goto err_clk_disable;
|
|
|
|
return 0;
|
|
|
|
err_clk_disable:
|
|
stm32_dwmac_clk_disable(dwmac);
|
|
err_remove_config_dt:
|
|
stmmac_remove_config_dt(pdev, plat_dat);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stm32_dwmac_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
int ret = stmmac_dvr_remove(&pdev->dev);
|
|
struct stm32_dwmac *dwmac = priv->plat->bsp_priv;
|
|
|
|
stm32_dwmac_clk_disable(priv->plat->bsp_priv);
|
|
|
|
if (dwmac->irq_pwr_wakeup >= 0) {
|
|
dev_pm_clear_wake_irq(&pdev->dev);
|
|
device_init_wakeup(&pdev->dev, false);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = clk_prepare_enable(dwmac->clk_ethstp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
clk_disable_unprepare(dwmac->clk_tx);
|
|
clk_disable_unprepare(dwmac->syscfg_clk);
|
|
if (dwmac->clk_eth_ck)
|
|
clk_disable_unprepare(dwmac->clk_eth_ck);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void stm32mp1_resume(struct stm32_dwmac *dwmac)
|
|
{
|
|
clk_disable_unprepare(dwmac->clk_ethstp);
|
|
}
|
|
|
|
static int stm32mcu_suspend(struct stm32_dwmac *dwmac)
|
|
{
|
|
clk_disable_unprepare(dwmac->clk_tx);
|
|
clk_disable_unprepare(dwmac->clk_rx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int stm32_dwmac_suspend(struct device *dev)
|
|
{
|
|
struct net_device *ndev = dev_get_drvdata(dev);
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
struct stm32_dwmac *dwmac = priv->plat->bsp_priv;
|
|
|
|
int ret;
|
|
|
|
ret = stmmac_suspend(dev);
|
|
|
|
if (dwmac->ops->suspend)
|
|
ret = dwmac->ops->suspend(dwmac);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stm32_dwmac_resume(struct device *dev)
|
|
{
|
|
struct net_device *ndev = dev_get_drvdata(dev);
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
struct stm32_dwmac *dwmac = priv->plat->bsp_priv;
|
|
int ret;
|
|
|
|
if (dwmac->ops->resume)
|
|
dwmac->ops->resume(dwmac);
|
|
|
|
ret = stm32_dwmac_init(priv->plat);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = stmmac_resume(dev);
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(stm32_dwmac_pm_ops,
|
|
stm32_dwmac_suspend, stm32_dwmac_resume);
|
|
|
|
static struct stm32_ops stm32mcu_dwmac_data = {
|
|
.set_mode = stm32mcu_set_mode,
|
|
.suspend = stm32mcu_suspend,
|
|
.syscfg_eth_mask = SYSCFG_MCU_ETH_MASK
|
|
};
|
|
|
|
static struct stm32_ops stm32mp1_dwmac_data = {
|
|
.set_mode = stm32mp1_set_mode,
|
|
.clk_prepare = stm32mp1_clk_prepare,
|
|
.suspend = stm32mp1_suspend,
|
|
.resume = stm32mp1_resume,
|
|
.parse_data = stm32mp1_parse_data,
|
|
.syscfg_eth_mask = SYSCFG_MP1_ETH_MASK
|
|
};
|
|
|
|
static const struct of_device_id stm32_dwmac_match[] = {
|
|
{ .compatible = "st,stm32-dwmac", .data = &stm32mcu_dwmac_data},
|
|
{ .compatible = "st,stm32mp1-dwmac", .data = &stm32mp1_dwmac_data},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, stm32_dwmac_match);
|
|
|
|
static struct platform_driver stm32_dwmac_driver = {
|
|
.probe = stm32_dwmac_probe,
|
|
.remove = stm32_dwmac_remove,
|
|
.driver = {
|
|
.name = "stm32-dwmac",
|
|
.pm = &stm32_dwmac_pm_ops,
|
|
.of_match_table = stm32_dwmac_match,
|
|
},
|
|
};
|
|
module_platform_driver(stm32_dwmac_driver);
|
|
|
|
MODULE_AUTHOR("Alexandre Torgue <alexandre.torgue@gmail.com>");
|
|
MODULE_AUTHOR("Christophe Roullier <christophe.roullier@st.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics STM32 DWMAC Specific Glue layer");
|
|
MODULE_LICENSE("GPL v2");
|