mirror of https://gitee.com/openkylin/linux.git
124 lines
4.2 KiB
C
124 lines
4.2 KiB
C
/* Driver for SCM Microsystems USB-ATAPI cable
|
|
* Header File
|
|
*
|
|
* $Id: shuttle_usbat.h,v 1.5 2000/09/17 14:44:52 groovyjava Exp $
|
|
*
|
|
* Current development and maintenance by:
|
|
* (c) 2000 Robert Baruch (autophile@dol.net)
|
|
* (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
|
|
*
|
|
* See shuttle_usbat.c for more explanation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2, or (at your option) any
|
|
* later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#ifndef _USB_SHUTTLE_USBAT_H
|
|
#define _USB_SHUTTLE_USBAT_H
|
|
|
|
/* Supported device types */
|
|
#define USBAT_DEV_HP8200 0x01
|
|
#define USBAT_DEV_FLASH 0x02
|
|
|
|
#define USBAT_EPP_PORT 0x10
|
|
#define USBAT_EPP_REGISTER 0x30
|
|
#define USBAT_ATA 0x40
|
|
#define USBAT_ISA 0x50
|
|
|
|
/* Commands (need to be logically OR'd with an access type */
|
|
#define USBAT_CMD_READ_REG 0x00
|
|
#define USBAT_CMD_WRITE_REG 0x01
|
|
#define USBAT_CMD_READ_BLOCK 0x02
|
|
#define USBAT_CMD_WRITE_BLOCK 0x03
|
|
#define USBAT_CMD_COND_READ_BLOCK 0x04
|
|
#define USBAT_CMD_COND_WRITE_BLOCK 0x05
|
|
#define USBAT_CMD_WRITE_REGS 0x07
|
|
|
|
/* Commands (these don't need an access type) */
|
|
#define USBAT_CMD_EXEC_CMD 0x80
|
|
#define USBAT_CMD_SET_FEAT 0x81
|
|
#define USBAT_CMD_UIO 0x82
|
|
|
|
/* Methods of accessing UIO register */
|
|
#define USBAT_UIO_READ 1
|
|
#define USBAT_UIO_WRITE 0
|
|
|
|
/* Qualifier bits */
|
|
#define USBAT_QUAL_FCQ 0x20 /* full compare */
|
|
#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */
|
|
|
|
/* USBAT Flash Media status types */
|
|
#define USBAT_FLASH_MEDIA_NONE 0
|
|
#define USBAT_FLASH_MEDIA_CF 1
|
|
|
|
/* USBAT Flash Media change types */
|
|
#define USBAT_FLASH_MEDIA_SAME 0
|
|
#define USBAT_FLASH_MEDIA_CHANGED 1
|
|
|
|
/* USBAT ATA registers */
|
|
#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */
|
|
#define USBAT_ATA_FEATURES 0x11 /* set features (W) */
|
|
#define USBAT_ATA_ERROR 0x11 /* error (R) */
|
|
#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */
|
|
#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */
|
|
#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */
|
|
#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */
|
|
#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */
|
|
#define USBAT_ATA_STATUS 0x17 /* device status (R) */
|
|
#define USBAT_ATA_CMD 0x17 /* device command (W) */
|
|
#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */
|
|
|
|
/* USBAT User I/O Data registers */
|
|
#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */
|
|
#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */
|
|
/* CDT = ACKD & !UI1 & !UI0 */
|
|
#define USBAT_UIO_1 0x20 /* I/O 1 */
|
|
#define USBAT_UIO_0 0x10 /* I/O 0 */
|
|
#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */
|
|
#define USBAT_UIO_UI1 0x04 /* Input 1 */
|
|
#define USBAT_UIO_UI0 0x02 /* Input 0 */
|
|
#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
|
|
|
|
/* USBAT User I/O Enable registers */
|
|
#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */
|
|
#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */
|
|
#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */
|
|
/* If ACKD=1, set OE1 to 1 also. */
|
|
#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */
|
|
#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */
|
|
|
|
/* USBAT Features */
|
|
#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */
|
|
#define USBAT_FEAT_U1 0x08
|
|
#define USBAT_FEAT_U0 0x04
|
|
#define USBAT_FEAT_ET1 0x02
|
|
#define USBAT_FEAT_ET2 0x01
|
|
|
|
extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
|
|
extern int init_usbat(struct us_data *us);
|
|
|
|
struct usbat_info {
|
|
int devicetype;
|
|
|
|
/* Used for Flash readers only */
|
|
unsigned long sectors; /* total sector count */
|
|
unsigned long ssize; /* sector size in bytes */
|
|
|
|
unsigned char sense_key;
|
|
unsigned long sense_asc; /* additional sense code */
|
|
unsigned long sense_ascq; /* additional sense code qualifier */
|
|
};
|
|
|
|
#endif
|