linux/arch/powerpc/kernel/idle_book3s.S

656 lines
15 KiB
ArmAsm

/*
* This file contains idle entry/exit functions for POWER7,
* POWER8 and POWER9 CPUs.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/threads.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/ppc-opcode.h>
#include <asm/hw_irq.h>
#include <asm/kvm_book3s_asm.h>
#include <asm/opal.h>
#include <asm/cpuidle.h>
#include <asm/book3s/64/mmu-hash.h>
#include <asm/mmu.h>
#undef DEBUG
/*
* Use unused space in the interrupt stack to save and restore
* registers for winkle support.
*/
#define _SDR1 GPR3
#define _RPR GPR4
#define _SPURR GPR5
#define _PURR GPR6
#define _TSCR GPR7
#define _DSCR GPR8
#define _AMOR GPR9
#define _WORT GPR10
#define _WORC GPR11
#define _PTCR GPR12
#define PSSCR_HV_TEMPLATE PSSCR_ESL | PSSCR_EC | \
PSSCR_PSLL_MASK | PSSCR_TR_MASK | \
PSSCR_MTL_MASK
.text
/*
* Used by threads before entering deep idle states. Saves SPRs
* in interrupt stack frame
*/
save_sprs_to_stack:
/*
* Note all register i.e per-core, per-subcore or per-thread is saved
* here since any thread in the core might wake up first
*/
BEGIN_FTR_SECTION
mfspr r3,SPRN_PTCR
std r3,_PTCR(r1)
/*
* Note - SDR1 is dropped in Power ISA v3. Hence not restoring
* SDR1 here
*/
FTR_SECTION_ELSE
mfspr r3,SPRN_SDR1
std r3,_SDR1(r1)
ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300)
mfspr r3,SPRN_RPR
std r3,_RPR(r1)
mfspr r3,SPRN_SPURR
std r3,_SPURR(r1)
mfspr r3,SPRN_PURR
std r3,_PURR(r1)
mfspr r3,SPRN_TSCR
std r3,_TSCR(r1)
mfspr r3,SPRN_DSCR
std r3,_DSCR(r1)
mfspr r3,SPRN_AMOR
std r3,_AMOR(r1)
mfspr r3,SPRN_WORT
std r3,_WORT(r1)
mfspr r3,SPRN_WORC
std r3,_WORC(r1)
blr
/*
* Used by threads when the lock bit of core_idle_state is set.
* Threads will spin in HMT_LOW until the lock bit is cleared.
* r14 - pointer to core_idle_state
* r15 - used to load contents of core_idle_state
*/
core_idle_lock_held:
HMT_LOW
3: lwz r15,0(r14)
andi. r15,r15,PNV_CORE_IDLE_LOCK_BIT
bne 3b
HMT_MEDIUM
lwarx r15,0,r14
blr
/*
* Pass requested state in r3:
* r3 - PNV_THREAD_NAP/SLEEP/WINKLE in POWER8
* - Requested STOP state in POWER9
*
* To check IRQ_HAPPENED in r4
* 0 - don't check
* 1 - check
*
* Address to 'rfid' to in r5
*/
_GLOBAL(pnv_powersave_common)
/* Use r3 to pass state nap/sleep/winkle */
/* NAP is a state loss, we create a regs frame on the
* stack, fill it up with the state we care about and
* stick a pointer to it in PACAR1. We really only
* need to save PC, some CR bits and the NV GPRs,
* but for now an interrupt frame will do.
*/
mflr r0
std r0,16(r1)
stdu r1,-INT_FRAME_SIZE(r1)
std r0,_LINK(r1)
std r0,_NIP(r1)
/* Hard disable interrupts */
mfmsr r9
rldicl r9,r9,48,1
rotldi r9,r9,16
mtmsrd r9,1 /* hard-disable interrupts */
/* Check if something happened while soft-disabled */
lbz r0,PACAIRQHAPPENED(r13)
andi. r0,r0,~PACA_IRQ_HARD_DIS@l
beq 1f
cmpwi cr0,r4,0
beq 1f
addi r1,r1,INT_FRAME_SIZE
ld r0,16(r1)
li r3,0 /* Return 0 (no nap) */
mtlr r0
blr
1: /* We mark irqs hard disabled as this is the state we'll
* be in when returning and we need to tell arch_local_irq_restore()
* about it
*/
li r0,PACA_IRQ_HARD_DIS
stb r0,PACAIRQHAPPENED(r13)
/* We haven't lost state ... yet */
li r0,0
stb r0,PACA_NAPSTATELOST(r13)
/* Continue saving state */
SAVE_GPR(2, r1)
SAVE_NVGPRS(r1)
mfcr r4
std r4,_CCR(r1)
std r9,_MSR(r1)
std r1,PACAR1(r13)
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
/* Tell KVM we're entering idle */
li r4,KVM_HWTHREAD_IN_IDLE
stb r4,HSTATE_HWTHREAD_STATE(r13)
#endif
/*
* Go to real mode to do the nap, as required by the architecture.
* Also, we need to be in real mode before setting hwthread_state,
* because as soon as we do that, another thread can switch
* the MMU context to the guest.
*/
LOAD_REG_IMMEDIATE(r7, MSR_IDLE)
li r6, MSR_RI
andc r6, r9, r6
mtmsrd r6, 1 /* clear RI before setting SRR0/1 */
mtspr SPRN_SRR0, r5
mtspr SPRN_SRR1, r7
rfid
.globl pnv_enter_arch207_idle_mode
pnv_enter_arch207_idle_mode:
stb r3,PACA_THREAD_IDLE_STATE(r13)
cmpwi cr3,r3,PNV_THREAD_SLEEP
bge cr3,2f
IDLE_STATE_ENTER_SEQ(PPC_NAP)
/* No return */
2:
/* Sleep or winkle */
lbz r7,PACA_THREAD_MASK(r13)
ld r14,PACA_CORE_IDLE_STATE_PTR(r13)
lwarx_loop1:
lwarx r15,0,r14
andi. r9,r15,PNV_CORE_IDLE_LOCK_BIT
bnel core_idle_lock_held
andc r15,r15,r7 /* Clear thread bit */
andi. r15,r15,PNV_CORE_IDLE_THREAD_BITS
/*
* If cr0 = 0, then current thread is the last thread of the core entering
* sleep. Last thread needs to execute the hardware bug workaround code if
* required by the platform.
* Make the workaround call unconditionally here. The below branch call is
* patched out when the idle states are discovered if the platform does not
* require it.
*/
.global pnv_fastsleep_workaround_at_entry
pnv_fastsleep_workaround_at_entry:
beq fastsleep_workaround_at_entry
stwcx. r15,0,r14
bne- lwarx_loop1
isync
common_enter: /* common code for all the threads entering sleep or winkle */
bgt cr3,enter_winkle
IDLE_STATE_ENTER_SEQ(PPC_SLEEP)
fastsleep_workaround_at_entry:
ori r15,r15,PNV_CORE_IDLE_LOCK_BIT
stwcx. r15,0,r14
bne- lwarx_loop1
isync
/* Fast sleep workaround */
li r3,1
li r4,1
bl opal_rm_config_cpu_idle_state
/* Clear Lock bit */
li r0,0
lwsync
stw r0,0(r14)
b common_enter
enter_winkle:
bl save_sprs_to_stack
IDLE_STATE_ENTER_SEQ(PPC_WINKLE)
/*
* r3 - requested stop state
*/
power_enter_stop:
/*
* Check if the requested state is a deep idle state.
*/
LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state)
ld r4,ADDROFF(pnv_first_deep_stop_state)(r5)
cmpd r3,r4
bge 2f
IDLE_STATE_ENTER_SEQ(PPC_STOP)
2:
/*
* Entering deep idle state.
* Clear thread bit in PACA_CORE_IDLE_STATE, save SPRs to
* stack and enter stop
*/
lbz r7,PACA_THREAD_MASK(r13)
ld r14,PACA_CORE_IDLE_STATE_PTR(r13)
lwarx_loop_stop:
lwarx r15,0,r14
andi. r9,r15,PNV_CORE_IDLE_LOCK_BIT
bnel core_idle_lock_held
andc r15,r15,r7 /* Clear thread bit */
stwcx. r15,0,r14
bne- lwarx_loop_stop
isync
bl save_sprs_to_stack
IDLE_STATE_ENTER_SEQ(PPC_STOP)
_GLOBAL(power7_idle)
/* Now check if user or arch enabled NAP mode */
LOAD_REG_ADDRBASE(r3,powersave_nap)
lwz r4,ADDROFF(powersave_nap)(r3)
cmpwi 0,r4,0
beqlr
li r3, 1
/* fall through */
_GLOBAL(power7_nap)
mr r4,r3
li r3,PNV_THREAD_NAP
LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode)
b pnv_powersave_common
/* No return */
_GLOBAL(power7_sleep)
li r3,PNV_THREAD_SLEEP
li r4,1
LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode)
b pnv_powersave_common
/* No return */
_GLOBAL(power7_winkle)
li r3,PNV_THREAD_WINKLE
li r4,1
LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode)
b pnv_powersave_common
/* No return */
#define CHECK_HMI_INTERRUPT \
mfspr r0,SPRN_SRR1; \
BEGIN_FTR_SECTION_NESTED(66); \
rlwinm r0,r0,45-31,0xf; /* extract wake reason field (P8) */ \
FTR_SECTION_ELSE_NESTED(66); \
rlwinm r0,r0,45-31,0xe; /* P7 wake reason field is 3 bits */ \
ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \
cmpwi r0,0xa; /* Hypervisor maintenance ? */ \
bne 20f; \
/* Invoke opal call to handle hmi */ \
ld r2,PACATOC(r13); \
ld r1,PACAR1(r13); \
std r3,ORIG_GPR3(r1); /* Save original r3 */ \
li r3,0; /* NULL argument */ \
bl hmi_exception_realmode; \
nop; \
ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \
20: nop;
/*
* r3 - requested stop state
*/
_GLOBAL(power9_idle_stop)
LOAD_REG_IMMEDIATE(r4, PSSCR_HV_TEMPLATE)
or r4,r4,r3
mtspr SPRN_PSSCR, r4
li r4, 1
LOAD_REG_ADDR(r5,power_enter_stop)
b pnv_powersave_common
/* No return */
/*
* Called from reset vector. Check whether we have woken up with
* hypervisor state loss. If yes, restore hypervisor state and return
* back to reset vector.
*
* r13 - Contents of HSPRG0
* cr3 - set to gt if waking up with partial/complete hypervisor state loss
*/
_GLOBAL(pnv_restore_hyp_resource)
BEGIN_FTR_SECTION
ld r2,PACATOC(r13);
/*
* POWER ISA 3. Use PSSCR to determine if we
* are waking up from deep idle state
*/
LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state)
ld r4,ADDROFF(pnv_first_deep_stop_state)(r5)
mfspr r5,SPRN_PSSCR
/*
* 0-3 bits correspond to Power-Saving Level Status
* which indicates the idle state we are waking up from
*/
rldicl r5,r5,4,60
cmpd cr4,r5,r4
bge cr4,pnv_wakeup_tb_loss
/*
* Waking up without hypervisor state loss. Return to
* reset vector
*/
blr
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
/*
* POWER ISA 2.07 or less.
* Check if last bit of HSPGR0 is set. This indicates whether we are
* waking up from winkle.
*/
clrldi r5,r13,63
clrrdi r13,r13,1
/* Now that we are sure r13 is corrected, load TOC */
ld r2,PACATOC(r13);
cmpwi cr4,r5,1
mtspr SPRN_HSPRG0,r13
lbz r0,PACA_THREAD_IDLE_STATE(r13)
cmpwi cr2,r0,PNV_THREAD_NAP
bgt cr2,pnv_wakeup_tb_loss /* Either sleep or Winkle */
/*
* We fall through here if PACA_THREAD_IDLE_STATE shows we are waking
* up from nap. At this stage CR3 shouldn't contains 'gt' since that
* indicates we are waking with hypervisor state loss from nap.
*/
bgt cr3,.
blr /* Return back to System Reset vector from where
pnv_restore_hyp_resource was invoked */
/*
* Called if waking up from idle state which can cause either partial or
* complete hyp state loss.
* In POWER8, called if waking up from fastsleep or winkle
* In POWER9, called if waking up from stop state >= pnv_first_deep_stop_state
*
* r13 - PACA
* cr3 - gt if waking up with partial/complete hypervisor state loss
* cr4 - eq if waking up from complete hypervisor state loss.
*/
_GLOBAL(pnv_wakeup_tb_loss)
ld r1,PACAR1(r13)
/*
* Before entering any idle state, the NVGPRs are saved in the stack
* and they are restored before switching to the process context. Hence
* until they are restored, they are free to be used.
*
* Save SRR1 and LR in NVGPRs as they might be clobbered in
* opal_call() (called in CHECK_HMI_INTERRUPT). SRR1 is required
* to determine the wakeup reason if we branch to kvm_start_guest. LR
* is required to return back to reset vector after hypervisor state
* restore is complete.
*/
mflr r17
mfspr r16,SPRN_SRR1
BEGIN_FTR_SECTION
CHECK_HMI_INTERRUPT
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
lbz r7,PACA_THREAD_MASK(r13)
ld r14,PACA_CORE_IDLE_STATE_PTR(r13)
lwarx_loop2:
lwarx r15,0,r14
andi. r9,r15,PNV_CORE_IDLE_LOCK_BIT
/*
* Lock bit is set in one of the 2 cases-
* a. In the sleep/winkle enter path, the last thread is executing
* fastsleep workaround code.
* b. In the wake up path, another thread is executing fastsleep
* workaround undo code or resyncing timebase or restoring context
* In either case loop until the lock bit is cleared.
*/
bnel core_idle_lock_held
cmpwi cr2,r15,0
/*
* At this stage
* cr2 - eq if first thread to wakeup in core
* cr3- gt if waking up with partial/complete hypervisor state loss
* cr4 - eq if waking up from complete hypervisor state loss.
*/
ori r15,r15,PNV_CORE_IDLE_LOCK_BIT
stwcx. r15,0,r14
bne- lwarx_loop2
isync
BEGIN_FTR_SECTION
lbz r4,PACA_SUBCORE_SIBLING_MASK(r13)
and r4,r4,r15
cmpwi r4,0 /* Check if first in subcore */
or r15,r15,r7 /* Set thread bit */
beq first_thread_in_subcore
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
or r15,r15,r7 /* Set thread bit */
beq cr2,first_thread_in_core
/* Not first thread in core or subcore to wake up */
b clear_lock
first_thread_in_subcore:
/*
* If waking up from sleep, subcore state is not lost. Hence
* skip subcore state restore
*/
bne cr4,subcore_state_restored
/* Restore per-subcore state */
ld r4,_SDR1(r1)
mtspr SPRN_SDR1,r4
ld r4,_RPR(r1)
mtspr SPRN_RPR,r4
ld r4,_AMOR(r1)
mtspr SPRN_AMOR,r4
subcore_state_restored:
/*
* Check if the thread is also the first thread in the core. If not,
* skip to clear_lock.
*/
bne cr2,clear_lock
first_thread_in_core:
/*
* First thread in the core waking up from any state which can cause
* partial or complete hypervisor state loss. It needs to
* call the fastsleep workaround code if the platform requires it.
* Call it unconditionally here. The below branch instruction will
* be patched out if the platform does not have fastsleep or does not
* require the workaround. Patching will be performed during the
* discovery of idle-states.
*/
.global pnv_fastsleep_workaround_at_exit
pnv_fastsleep_workaround_at_exit:
b fastsleep_workaround_at_exit
timebase_resync:
/*
* Use cr3 which indicates that we are waking up with atleast partial
* hypervisor state loss to determine if TIMEBASE RESYNC is needed.
*/
ble cr3,clear_lock
/* Time base re-sync */
bl opal_rm_resync_timebase;
/*
* If waking up from sleep, per core state is not lost, skip to
* clear_lock.
*/
bne cr4,clear_lock
/*
* First thread in the core to wake up and its waking up with
* complete hypervisor state loss. Restore per core hypervisor
* state.
*/
BEGIN_FTR_SECTION
ld r4,_PTCR(r1)
mtspr SPRN_PTCR,r4
ld r4,_RPR(r1)
mtspr SPRN_RPR,r4
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
ld r4,_TSCR(r1)
mtspr SPRN_TSCR,r4
ld r4,_WORC(r1)
mtspr SPRN_WORC,r4
clear_lock:
andi. r15,r15,PNV_CORE_IDLE_THREAD_BITS
lwsync
stw r15,0(r14)
common_exit:
/*
* Common to all threads.
*
* If waking up from sleep, hypervisor state is not lost. Hence
* skip hypervisor state restore.
*/
bne cr4,hypervisor_state_restored
/* Waking up from winkle */
BEGIN_MMU_FTR_SECTION
b no_segments
END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
/* Restore SLB from PACA */
ld r8,PACA_SLBSHADOWPTR(r13)
.rept SLB_NUM_BOLTED
li r3, SLBSHADOW_SAVEAREA
LDX_BE r5, r8, r3
addi r3, r3, 8
LDX_BE r6, r8, r3
andis. r7,r5,SLB_ESID_V@h
beq 1f
slbmte r6,r5
1: addi r8,r8,16
.endr
no_segments:
/* Restore per thread state */
ld r4,_SPURR(r1)
mtspr SPRN_SPURR,r4
ld r4,_PURR(r1)
mtspr SPRN_PURR,r4
ld r4,_DSCR(r1)
mtspr SPRN_DSCR,r4
ld r4,_WORT(r1)
mtspr SPRN_WORT,r4
/* Call cur_cpu_spec->cpu_restore() */
LOAD_REG_ADDR(r4, cur_cpu_spec)
ld r4,0(r4)
ld r12,CPU_SPEC_RESTORE(r4)
#ifdef PPC64_ELF_ABI_v1
ld r12,0(r12)
#endif
mtctr r12
bctrl
hypervisor_state_restored:
mtspr SPRN_SRR1,r16
mtlr r17
blr /* Return back to System Reset vector from where
pnv_restore_hyp_resource was invoked */
fastsleep_workaround_at_exit:
li r3,1
li r4,0
bl opal_rm_config_cpu_idle_state
b timebase_resync
/*
* R3 here contains the value that will be returned to the caller
* of power7_nap.
*/
_GLOBAL(pnv_wakeup_loss)
ld r1,PACAR1(r13)
BEGIN_FTR_SECTION
CHECK_HMI_INTERRUPT
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
REST_NVGPRS(r1)
REST_GPR(2, r1)
ld r6,_CCR(r1)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
addi r1,r1,INT_FRAME_SIZE
mtcr r6
mtspr SPRN_SRR1,r4
mtspr SPRN_SRR0,r5
rfid
/*
* R3 here contains the value that will be returned to the caller
* of power7_nap.
*/
_GLOBAL(pnv_wakeup_noloss)
lbz r0,PACA_NAPSTATELOST(r13)
cmpwi r0,0
bne pnv_wakeup_loss
BEGIN_FTR_SECTION
CHECK_HMI_INTERRUPT
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
ld r1,PACAR1(r13)
ld r6,_CCR(r1)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
addi r1,r1,INT_FRAME_SIZE
mtcr r6
mtspr SPRN_SRR1,r4
mtspr SPRN_SRR0,r5
rfid