mirror of https://gitee.com/openkylin/linux.git
303 lines
7.5 KiB
Plaintext
303 lines
7.5 KiB
Plaintext
/*
|
|
* MPC8548CDS Device Tree Source stub (no addresses or top-level ranges)
|
|
*
|
|
* Copyright 2012 Freescale Semiconductor Inc.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* * Neither the name of Freescale Semiconductor nor the
|
|
* names of its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
*
|
|
* ALTERNATIVELY, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") as published by the Free Software
|
|
* Foundation, either version 2 of that License or (at your option) any
|
|
* later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
&board_lbc {
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x01000000>;
|
|
bank-width = <2>;
|
|
device-width = <2>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x0b00000>;
|
|
label = "ramdisk-nor";
|
|
};
|
|
|
|
partition@300000 {
|
|
reg = <0x0b00000 0x0400000>;
|
|
label = "kernel-nor";
|
|
};
|
|
|
|
partition@700000 {
|
|
reg = <0x0f00000 0x060000>;
|
|
label = "dtb-nor";
|
|
};
|
|
|
|
partition@760000 {
|
|
reg = <0x0f60000 0x020000>;
|
|
label = "env-nor";
|
|
read-only;
|
|
};
|
|
|
|
partition@780000 {
|
|
reg = <0x0f80000 0x080000>;
|
|
label = "u-boot-nor";
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
board-control@1,0 {
|
|
compatible = "fsl,mpc8548cds-fpga";
|
|
reg = <0x1 0x0 0x1000>;
|
|
};
|
|
};
|
|
|
|
&board_soc {
|
|
i2c@3000 {
|
|
eeprom@50 {
|
|
compatible = "atmel,24c64";
|
|
reg = <0x50>;
|
|
};
|
|
|
|
eeprom@56 {
|
|
compatible = "atmel,24c64";
|
|
reg = <0x56>;
|
|
};
|
|
|
|
eeprom@57 {
|
|
compatible = "atmel,24c64";
|
|
reg = <0x57>;
|
|
};
|
|
};
|
|
|
|
i2c@3100 {
|
|
eeprom@50 {
|
|
compatible = "atmel,24c64";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
enet0: ethernet@24000 {
|
|
tbi-handle = <&tbi0>;
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
mdio@24520 {
|
|
phy0: ethernet-phy@0 {
|
|
interrupts = <5 1 0 0>;
|
|
reg = <0x0>;
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
interrupts = <5 1 0 0>;
|
|
reg = <0x1>;
|
|
};
|
|
phy2: ethernet-phy@2 {
|
|
interrupts = <5 1 0 0>;
|
|
reg = <0x2>;
|
|
};
|
|
phy3: ethernet-phy@3 {
|
|
interrupts = <5 1 0 0>;
|
|
reg = <0x3>;
|
|
};
|
|
tbi0: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet1: ethernet@25000 {
|
|
tbi-handle = <&tbi1>;
|
|
phy-handle = <&phy1>;
|
|
};
|
|
|
|
mdio@25520 {
|
|
tbi1: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet2: ethernet@26000 {
|
|
tbi-handle = <&tbi2>;
|
|
phy-handle = <&phy2>;
|
|
};
|
|
|
|
mdio@26520 {
|
|
tbi2: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet3: ethernet@27000 {
|
|
tbi-handle = <&tbi3>;
|
|
phy-handle = <&phy3>;
|
|
};
|
|
|
|
mdio@27520 {
|
|
tbi3: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
};
|
|
|
|
&board_pci0 {
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x4 (PCIX Slot 2) */
|
|
0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
|
|
0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
|
|
0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
|
|
0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
|
|
|
|
/* IDSEL 0x5 (PCIX Slot 3) */
|
|
0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
|
|
0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
|
|
0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
|
|
0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
|
|
|
|
/* IDSEL 0x6 (PCIX Slot 4) */
|
|
0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
|
|
0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
|
|
0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
|
|
0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
|
|
|
|
/* IDSEL 0x8 (PCIX Slot 5) */
|
|
0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
|
|
0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
|
|
0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
|
|
0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
|
|
|
|
/* IDSEL 0xC (Tsi310 bridge) */
|
|
0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
|
|
0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
|
|
0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
|
|
0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
|
|
|
|
/* IDSEL 0x14 (Slot 2) */
|
|
0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
|
|
0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
|
|
0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
|
|
0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
|
|
|
|
/* IDSEL 0x15 (Slot 3) */
|
|
0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
|
|
0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
|
|
0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
|
|
0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
|
|
|
|
/* IDSEL 0x16 (Slot 4) */
|
|
0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
|
|
0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
|
|
0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
|
|
0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
|
|
|
|
/* IDSEL 0x18 (Slot 5) */
|
|
0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
|
|
0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
|
|
0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
|
|
0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
|
|
|
|
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
|
|
0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
|
|
0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
|
|
0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
|
|
0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
|
|
|
|
pci_bridge@1c {
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
|
|
/* IDSEL 0x00 (PrPMC Site) */
|
|
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
|
|
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
|
|
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
|
|
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
|
|
|
|
/* IDSEL 0x04 (VIA chip) */
|
|
0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
|
|
0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
|
|
0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
|
|
0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
|
|
|
|
/* IDSEL 0x05 (8139) */
|
|
0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
|
|
|
|
/* IDSEL 0x06 (Slot 6) */
|
|
0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
|
|
0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
|
|
0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
|
|
0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
|
|
|
|
/* IDESL 0x07 (Slot 7) */
|
|
0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
|
|
0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
|
|
0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
|
|
0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
|
|
|
|
reg = <0xe000 0x0 0x0 0x0 0x0>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
ranges = <0x2000000 0x0 0x80000000
|
|
0x2000000 0x0 0x80000000
|
|
0x0 0x20000000
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x80000>;
|
|
clock-frequency = <33333333>;
|
|
|
|
isa@4 {
|
|
device_type = "isa";
|
|
#interrupt-cells = <2>;
|
|
#size-cells = <1>;
|
|
#address-cells = <2>;
|
|
reg = <0x2000 0x0 0x0 0x0 0x0>;
|
|
ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
|
|
interrupt-parent = <&i8259>;
|
|
|
|
i8259: interrupt-controller@20 {
|
|
interrupt-controller;
|
|
device_type = "interrupt-controller";
|
|
reg = <0x1 0x20 0x2
|
|
0x1 0xa0 0x2
|
|
0x1 0x4d0 0x2>;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "chrp,iic";
|
|
interrupts = <0 1 0 0>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
rtc@70 {
|
|
compatible = "pnpPNP,b00";
|
|
reg = <0x1 0x70 0x2>;
|
|
};
|
|
};
|
|
};
|
|
};
|