mirror of https://gitee.com/openkylin/linux.git
978ccaa8ea
We can get the following oops from gpio_get_value_cansleep() when a GPIO controller doesn't provide a get() callback: Unable to handle kernel paging request for instruction fetch Faulting instruction address: 0x00000000 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [00000000] 0x0 LR [c0182fb0] gpio_get_value_cansleep+0x40/0x50 Call Trace: [c7b79e80] [c0183f28] gpio_value_show+0x5c/0x94 [c7b79ea0] [c01a584c] dev_attr_show+0x30/0x7c [c7b79eb0] [c00d6b48] fill_read_buffer+0x68/0xe0 [c7b79ed0] [c00d6c54] sysfs_read_file+0x94/0xbc [c7b79ef0] [c008f24c] vfs_read+0xb4/0x16c [c7b79f10] [c008f580] sys_read+0x4c/0x90 [c7b79f40] [c0013a14] ret_from_syscall+0x0/0x38 It's OK to request the value of *any* GPIO; most GPIOs are bidirectional, so configuring them as outputs just enables an output driver and doesn't disable the input logic. So the problem is that gpio_get_value_cansleep() isn't making the same sanity check that gpio_get_value() does: making sure this GPIO isn't one of the atypical "no input logic" cases. Reported-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: <stable@kernel.org> [2.6.27.x, 2.6.26.x, 2.6.25.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| Makefile | ||
| bt8xxgpio.c | ||
| gpiolib.c | ||
| max732x.c | ||
| max7301.c | ||
| mcp23s08.c | ||
| pca953x.c | ||
| pcf857x.c | ||