mirror of https://gitee.com/openkylin/linux.git
2070 lines
54 KiB
C
2070 lines
54 KiB
C
|
|
/* drivers/atm/firestream.c - FireStream 155 (MB86697) and
|
|
* FireStream 50 (MB86695) device driver
|
|
*/
|
|
|
|
/* Written & (C) 2000 by R.E.Wolff@BitWizard.nl
|
|
* Copied snippets from zatm.c by Werner Almesberger, EPFL LRC/ICA
|
|
* and ambassador.c Copyright (C) 1995-1999 Madge Networks Ltd
|
|
*/
|
|
|
|
/*
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian
|
|
system and in the file COPYING in the Linux kernel source.
|
|
*/
|
|
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/poison.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/atm.h>
|
|
#include <linux/atmdev.h>
|
|
#include <linux/sonet.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ioport.h> /* for request_region */
|
|
#include <linux/uio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/capability.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/string.h>
|
|
#include <asm/io.h>
|
|
#include <linux/atomic.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/wait.h>
|
|
|
|
#include "firestream.h"
|
|
|
|
static int loopback = 0;
|
|
static int num=0x5a;
|
|
|
|
/* According to measurements (but they look suspicious to me!) done in
|
|
* '97, 37% of the packets are one cell in size. So it pays to have
|
|
* buffers allocated at that size. A large jump in percentage of
|
|
* packets occurs at packets around 536 bytes in length. So it also
|
|
* pays to have those pre-allocated. Unfortunately, we can't fully
|
|
* take advantage of this as the majority of the packets is likely to
|
|
* be TCP/IP (As where obviously the measurement comes from) There the
|
|
* link would be opened with say a 1500 byte MTU, and we can't handle
|
|
* smaller buffers more efficiently than the larger ones. -- REW
|
|
*/
|
|
|
|
/* Due to the way Linux memory management works, specifying "576" as
|
|
* an allocation size here isn't going to help. They are allocated
|
|
* from 1024-byte regions anyway. With the size of the sk_buffs (quite
|
|
* large), it doesn't pay to allocate the smallest size (64) -- REW */
|
|
|
|
/* This is all guesswork. Hard numbers to back this up or disprove this,
|
|
* are appreciated. -- REW */
|
|
|
|
/* The last entry should be about 64k. However, the "buffer size" is
|
|
* passed to the chip in a 16 bit field. I don't know how "65536"
|
|
* would be interpreted. -- REW */
|
|
|
|
#define NP FS_NR_FREE_POOLS
|
|
static int rx_buf_sizes[NP] = {128, 256, 512, 1024, 2048, 4096, 16384, 65520};
|
|
/* log2: 7 8 9 10 11 12 14 16 */
|
|
|
|
#if 0
|
|
static int rx_pool_sizes[NP] = {1024, 1024, 512, 256, 128, 64, 32, 32};
|
|
#else
|
|
/* debug */
|
|
static int rx_pool_sizes[NP] = {128, 128, 128, 64, 64, 64, 32, 32};
|
|
#endif
|
|
/* log2: 10 10 9 8 7 6 5 5 */
|
|
/* sumlog2: 17 18 18 18 18 18 19 21 */
|
|
/* mem allocated: 128k 256k 256k 256k 256k 256k 512k 2M */
|
|
/* tot mem: almost 4M */
|
|
|
|
/* NP is shorter, so that it fits on a single line. */
|
|
#undef NP
|
|
|
|
|
|
/* Small hardware gotcha:
|
|
|
|
The FS50 CAM (VP/VC match registers) always take the lowest channel
|
|
number that matches. This is not a problem.
|
|
|
|
However, they also ignore whether the channel is enabled or
|
|
not. This means that if you allocate channel 0 to 1.2 and then
|
|
channel 1 to 0.0, then disabeling channel 0 and writing 0 to the
|
|
match channel for channel 0 will "steal" the traffic from channel
|
|
1, even if you correctly disable channel 0.
|
|
|
|
Workaround:
|
|
|
|
- When disabling channels, write an invalid VP/VC value to the
|
|
match register. (We use 0xffffffff, which in the worst case
|
|
matches VP/VC = <maxVP>/<maxVC>, but I expect it not to match
|
|
anything as some "when not in use, program to 0" bits are now
|
|
programmed to 1...)
|
|
|
|
- Don't initialize the match registers to 0, as 0.0 is a valid
|
|
channel.
|
|
*/
|
|
|
|
|
|
/* Optimization hints and tips.
|
|
|
|
The FireStream chips are very capable of reducing the amount of
|
|
"interrupt-traffic" for the CPU. This driver requests an interrupt on EVERY
|
|
action. You could try to minimize this a bit.
|
|
|
|
Besides that, the userspace->kernel copy and the PCI bus are the
|
|
performance limiting issues for this driver.
|
|
|
|
You could queue up a bunch of outgoing packets without telling the
|
|
FireStream. I'm not sure that's going to win you much though. The
|
|
Linux layer won't tell us in advance when it's not going to give us
|
|
any more packets in a while. So this is tricky to implement right without
|
|
introducing extra delays.
|
|
|
|
-- REW
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* The strings that define what the RX queue entry is all about. */
|
|
/* Fujitsu: Please tell me which ones can have a pointer to a
|
|
freepool descriptor! */
|
|
static char *res_strings[] = {
|
|
"RX OK: streaming not EOP",
|
|
"RX OK: streaming EOP",
|
|
"RX OK: Single buffer packet",
|
|
"RX OK: packet mode",
|
|
"RX OK: F4 OAM (end to end)",
|
|
"RX OK: F4 OAM (Segment)",
|
|
"RX OK: F5 OAM (end to end)",
|
|
"RX OK: F5 OAM (Segment)",
|
|
"RX OK: RM cell",
|
|
"RX OK: TRANSP cell",
|
|
"RX OK: TRANSPC cell",
|
|
"Unmatched cell",
|
|
"reserved 12",
|
|
"reserved 13",
|
|
"reserved 14",
|
|
"Unrecognized cell",
|
|
"reserved 16",
|
|
"reassembly abort: AAL5 abort",
|
|
"packet purged",
|
|
"packet ageing timeout",
|
|
"channel ageing timeout",
|
|
"calculated length error",
|
|
"programmed length limit error",
|
|
"aal5 crc32 error",
|
|
"oam transp or transpc crc10 error",
|
|
"reserved 25",
|
|
"reserved 26",
|
|
"reserved 27",
|
|
"reserved 28",
|
|
"reserved 29",
|
|
"reserved 30", /* FIXME: The strings between 30-40 might be wrong. */
|
|
"reassembly abort: no buffers",
|
|
"receive buffer overflow",
|
|
"change in GFC",
|
|
"receive buffer full",
|
|
"low priority discard - no receive descriptor",
|
|
"low priority discard - missing end of packet",
|
|
"reserved 37",
|
|
"reserved 38",
|
|
"reserved 39",
|
|
"reseverd 40",
|
|
"reserved 41",
|
|
"reserved 42",
|
|
"reserved 43",
|
|
"reserved 44",
|
|
"reserved 45",
|
|
"reserved 46",
|
|
"reserved 47",
|
|
"reserved 48",
|
|
"reserved 49",
|
|
"reserved 50",
|
|
"reserved 51",
|
|
"reserved 52",
|
|
"reserved 53",
|
|
"reserved 54",
|
|
"reserved 55",
|
|
"reserved 56",
|
|
"reserved 57",
|
|
"reserved 58",
|
|
"reserved 59",
|
|
"reserved 60",
|
|
"reserved 61",
|
|
"reserved 62",
|
|
"reserved 63",
|
|
};
|
|
|
|
static char *irq_bitname[] = {
|
|
"LPCO",
|
|
"DPCO",
|
|
"RBRQ0_W",
|
|
"RBRQ1_W",
|
|
"RBRQ2_W",
|
|
"RBRQ3_W",
|
|
"RBRQ0_NF",
|
|
"RBRQ1_NF",
|
|
"RBRQ2_NF",
|
|
"RBRQ3_NF",
|
|
"BFP_SC",
|
|
"INIT",
|
|
"INIT_ERR",
|
|
"USCEO",
|
|
"UPEC0",
|
|
"VPFCO",
|
|
"CRCCO",
|
|
"HECO",
|
|
"TBRQ_W",
|
|
"TBRQ_NF",
|
|
"CTPQ_E",
|
|
"GFC_C0",
|
|
"PCI_FTL",
|
|
"CSQ_W",
|
|
"CSQ_NF",
|
|
"EXT_INT",
|
|
"RXDMA_S"
|
|
};
|
|
|
|
|
|
#define PHY_EOF -1
|
|
#define PHY_CLEARALL -2
|
|
|
|
struct reginit_item {
|
|
int reg, val;
|
|
};
|
|
|
|
|
|
static struct reginit_item PHY_NTC_INIT[] = {
|
|
{ PHY_CLEARALL, 0x40 },
|
|
{ 0x12, 0x0001 },
|
|
{ 0x13, 0x7605 },
|
|
{ 0x1A, 0x0001 },
|
|
{ 0x1B, 0x0005 },
|
|
{ 0x38, 0x0003 },
|
|
{ 0x39, 0x0006 }, /* changed here to make loopback */
|
|
{ 0x01, 0x5262 },
|
|
{ 0x15, 0x0213 },
|
|
{ 0x00, 0x0003 },
|
|
{ PHY_EOF, 0}, /* -1 signals end of list */
|
|
};
|
|
|
|
|
|
/* Safetyfeature: If the card interrupts more than this number of times
|
|
in a jiffy (1/100th of a second) then we just disable the interrupt and
|
|
print a message. This prevents the system from hanging.
|
|
|
|
150000 packets per second is close to the limit a PC is going to have
|
|
anyway. We therefore have to disable this for production. -- REW */
|
|
#undef IRQ_RATE_LIMIT // 100
|
|
|
|
/* Interrupts work now. Unlike serial cards, ATM cards don't work all
|
|
that great without interrupts. -- REW */
|
|
#undef FS_POLL_FREQ // 100
|
|
|
|
/*
|
|
This driver can spew a whole lot of debugging output at you. If you
|
|
need maximum performance, you should disable the DEBUG define. To
|
|
aid in debugging in the field, I'm leaving the compile-time debug
|
|
features enabled, and disable them "runtime". That allows me to
|
|
instruct people with problems to enable debugging without requiring
|
|
them to recompile... -- REW
|
|
*/
|
|
#define DEBUG
|
|
|
|
#ifdef DEBUG
|
|
#define fs_dprintk(f, str...) if (fs_debug & f) printk (str)
|
|
#else
|
|
#define fs_dprintk(f, str...) /* nothing */
|
|
#endif
|
|
|
|
|
|
static int fs_keystream = 0;
|
|
|
|
#ifdef DEBUG
|
|
/* I didn't forget to set this to zero before shipping. Hit me with a stick
|
|
if you get this with the debug default not set to zero again. -- REW */
|
|
static int fs_debug = 0;
|
|
#else
|
|
#define fs_debug 0
|
|
#endif
|
|
|
|
#ifdef MODULE
|
|
#ifdef DEBUG
|
|
module_param(fs_debug, int, 0644);
|
|
#endif
|
|
module_param(loopback, int, 0);
|
|
module_param(num, int, 0);
|
|
module_param(fs_keystream, int, 0);
|
|
/* XXX Add rx_buf_sizes, and rx_pool_sizes As per request Amar. -- REW */
|
|
#endif
|
|
|
|
|
|
#define FS_DEBUG_FLOW 0x00000001
|
|
#define FS_DEBUG_OPEN 0x00000002
|
|
#define FS_DEBUG_QUEUE 0x00000004
|
|
#define FS_DEBUG_IRQ 0x00000008
|
|
#define FS_DEBUG_INIT 0x00000010
|
|
#define FS_DEBUG_SEND 0x00000020
|
|
#define FS_DEBUG_PHY 0x00000040
|
|
#define FS_DEBUG_CLEANUP 0x00000080
|
|
#define FS_DEBUG_QOS 0x00000100
|
|
#define FS_DEBUG_TXQ 0x00000200
|
|
#define FS_DEBUG_ALLOC 0x00000400
|
|
#define FS_DEBUG_TXMEM 0x00000800
|
|
#define FS_DEBUG_QSIZE 0x00001000
|
|
|
|
|
|
#define func_enter() fs_dprintk(FS_DEBUG_FLOW, "fs: enter %s\n", __func__)
|
|
#define func_exit() fs_dprintk(FS_DEBUG_FLOW, "fs: exit %s\n", __func__)
|
|
|
|
|
|
static struct fs_dev *fs_boards = NULL;
|
|
|
|
#ifdef DEBUG
|
|
|
|
static void my_hd (void *addr, int len)
|
|
{
|
|
int j, ch;
|
|
unsigned char *ptr = addr;
|
|
|
|
while (len > 0) {
|
|
printk ("%p ", ptr);
|
|
for (j=0;j < ((len < 16)?len:16);j++) {
|
|
printk ("%02x %s", ptr[j], (j==7)?" ":"");
|
|
}
|
|
for ( ;j < 16;j++) {
|
|
printk (" %s", (j==7)?" ":"");
|
|
}
|
|
for (j=0;j < ((len < 16)?len:16);j++) {
|
|
ch = ptr[j];
|
|
printk ("%c", (ch < 0x20)?'.':((ch > 0x7f)?'.':ch));
|
|
}
|
|
printk ("\n");
|
|
ptr += 16;
|
|
len -= 16;
|
|
}
|
|
}
|
|
#else /* DEBUG */
|
|
static void my_hd (void *addr, int len){}
|
|
#endif /* DEBUG */
|
|
|
|
/********** free an skb (as per ATM device driver documentation) **********/
|
|
|
|
/* Hmm. If this is ATM specific, why isn't there an ATM routine for this?
|
|
* I copied it over from the ambassador driver. -- REW */
|
|
|
|
static inline void fs_kfree_skb (struct sk_buff * skb)
|
|
{
|
|
if (ATM_SKB(skb)->vcc->pop)
|
|
ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb);
|
|
else
|
|
dev_kfree_skb_any (skb);
|
|
}
|
|
|
|
|
|
|
|
|
|
/* It seems the ATM forum recommends this horribly complicated 16bit
|
|
* floating point format. Turns out the Ambassador uses the exact same
|
|
* encoding. I just copied it over. If Mitch agrees, I'll move it over
|
|
* to the atm_misc file or something like that. (and remove it from
|
|
* here and the ambassador driver) -- REW
|
|
*/
|
|
|
|
/* The good thing about this format is that it is monotonic. So,
|
|
a conversion routine need not be very complicated. To be able to
|
|
round "nearest" we need to take along a few extra bits. Lets
|
|
put these after 16 bits, so that we can just return the top 16
|
|
bits of the 32bit number as the result:
|
|
|
|
int mr (unsigned int rate, int r)
|
|
{
|
|
int e = 16+9;
|
|
static int round[4]={0, 0, 0xffff, 0x8000};
|
|
if (!rate) return 0;
|
|
while (rate & 0xfc000000) {
|
|
rate >>= 1;
|
|
e++;
|
|
}
|
|
while (! (rate & 0xfe000000)) {
|
|
rate <<= 1;
|
|
e--;
|
|
}
|
|
|
|
// Now the mantissa is in positions bit 16-25. Excepf for the "hidden 1" that's in bit 26.
|
|
rate &= ~0x02000000;
|
|
// Next add in the exponent
|
|
rate |= e << (16+9);
|
|
// And perform the rounding:
|
|
return (rate + round[r]) >> 16;
|
|
}
|
|
|
|
14 lines-of-code. Compare that with the 120 that the Ambassador
|
|
guys needed. (would be 8 lines shorter if I'd try to really reduce
|
|
the number of lines:
|
|
|
|
int mr (unsigned int rate, int r)
|
|
{
|
|
int e = 16+9;
|
|
static int round[4]={0, 0, 0xffff, 0x8000};
|
|
if (!rate) return 0;
|
|
for (; rate & 0xfc000000 ;rate >>= 1, e++);
|
|
for (;!(rate & 0xfe000000);rate <<= 1, e--);
|
|
return ((rate & ~0x02000000) | (e << (16+9)) + round[r]) >> 16;
|
|
}
|
|
|
|
Exercise for the reader: Remove one more line-of-code, without
|
|
cheating. (Just joining two lines is cheating). (I know it's
|
|
possible, don't think you've beat me if you found it... If you
|
|
manage to lose two lines or more, keep me updated! ;-)
|
|
|
|
-- REW */
|
|
|
|
|
|
#define ROUND_UP 1
|
|
#define ROUND_DOWN 2
|
|
#define ROUND_NEAREST 3
|
|
/********** make rate (not quite as much fun as Horizon) **********/
|
|
|
|
static int make_rate(unsigned int rate, int r,
|
|
u16 *bits, unsigned int *actual)
|
|
{
|
|
unsigned char exp = -1; /* hush gcc */
|
|
unsigned int man = -1; /* hush gcc */
|
|
|
|
fs_dprintk (FS_DEBUG_QOS, "make_rate %u", rate);
|
|
|
|
/* rates in cells per second, ITU format (nasty 16-bit floating-point)
|
|
given 5-bit e and 9-bit m:
|
|
rate = EITHER (1+m/2^9)*2^e OR 0
|
|
bits = EITHER 1<<14 | e<<9 | m OR 0
|
|
(bit 15 is "reserved", bit 14 "non-zero")
|
|
smallest rate is 0 (special representation)
|
|
largest rate is (1+511/512)*2^31 = 4290772992 (< 2^32-1)
|
|
smallest non-zero rate is (1+0/512)*2^0 = 1 (> 0)
|
|
simple algorithm:
|
|
find position of top bit, this gives e
|
|
remove top bit and shift (rounding if feeling clever) by 9-e
|
|
*/
|
|
/* Ambassador ucode bug: please don't set bit 14! so 0 rate not
|
|
representable. // This should move into the ambassador driver
|
|
when properly merged. -- REW */
|
|
|
|
if (rate > 0xffc00000U) {
|
|
/* larger than largest representable rate */
|
|
|
|
if (r == ROUND_UP) {
|
|
return -EINVAL;
|
|
} else {
|
|
exp = 31;
|
|
man = 511;
|
|
}
|
|
|
|
} else if (rate) {
|
|
/* representable rate */
|
|
|
|
exp = 31;
|
|
man = rate;
|
|
|
|
/* invariant: rate = man*2^(exp-31) */
|
|
while (!(man & (1<<31))) {
|
|
exp = exp - 1;
|
|
man = man<<1;
|
|
}
|
|
|
|
/* man has top bit set
|
|
rate = (2^31+(man-2^31))*2^(exp-31)
|
|
rate = (1+(man-2^31)/2^31)*2^exp
|
|
*/
|
|
man = man<<1;
|
|
man &= 0xffffffffU; /* a nop on 32-bit systems */
|
|
/* rate = (1+man/2^32)*2^exp
|
|
|
|
exp is in the range 0 to 31, man is in the range 0 to 2^32-1
|
|
time to lose significance... we want m in the range 0 to 2^9-1
|
|
rounding presents a minor problem... we first decide which way
|
|
we are rounding (based on given rounding direction and possibly
|
|
the bits of the mantissa that are to be discarded).
|
|
*/
|
|
|
|
switch (r) {
|
|
case ROUND_DOWN: {
|
|
/* just truncate */
|
|
man = man>>(32-9);
|
|
break;
|
|
}
|
|
case ROUND_UP: {
|
|
/* check all bits that we are discarding */
|
|
if (man & (~0U>>9)) {
|
|
man = (man>>(32-9)) + 1;
|
|
if (man == (1<<9)) {
|
|
/* no need to check for round up outside of range */
|
|
man = 0;
|
|
exp += 1;
|
|
}
|
|
} else {
|
|
man = (man>>(32-9));
|
|
}
|
|
break;
|
|
}
|
|
case ROUND_NEAREST: {
|
|
/* check msb that we are discarding */
|
|
if (man & (1<<(32-9-1))) {
|
|
man = (man>>(32-9)) + 1;
|
|
if (man == (1<<9)) {
|
|
/* no need to check for round up outside of range */
|
|
man = 0;
|
|
exp += 1;
|
|
}
|
|
} else {
|
|
man = (man>>(32-9));
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
} else {
|
|
/* zero rate - not representable */
|
|
|
|
if (r == ROUND_DOWN) {
|
|
return -EINVAL;
|
|
} else {
|
|
exp = 0;
|
|
man = 0;
|
|
}
|
|
}
|
|
|
|
fs_dprintk (FS_DEBUG_QOS, "rate: man=%u, exp=%hu", man, exp);
|
|
|
|
if (bits)
|
|
*bits = /* (1<<14) | */ (exp<<9) | man;
|
|
|
|
if (actual)
|
|
*actual = (exp >= 9)
|
|
? (1 << exp) + (man << (exp-9))
|
|
: (1 << exp) + ((man + (1<<(9-exp-1))) >> (9-exp));
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
|
|
/* FireStream access routines */
|
|
/* For DEEP-DOWN debugging these can be rigged to intercept accesses to
|
|
certain registers or to just log all accesses. */
|
|
|
|
static inline void write_fs (struct fs_dev *dev, int offset, u32 val)
|
|
{
|
|
writel (val, dev->base + offset);
|
|
}
|
|
|
|
|
|
static inline u32 read_fs (struct fs_dev *dev, int offset)
|
|
{
|
|
return readl (dev->base + offset);
|
|
}
|
|
|
|
|
|
|
|
static inline struct FS_QENTRY *get_qentry (struct fs_dev *dev, struct queue *q)
|
|
{
|
|
return bus_to_virt (read_fs (dev, Q_WP(q->offset)) & Q_ADDR_MASK);
|
|
}
|
|
|
|
|
|
static void submit_qentry (struct fs_dev *dev, struct queue *q, struct FS_QENTRY *qe)
|
|
{
|
|
u32 wp;
|
|
struct FS_QENTRY *cqe;
|
|
|
|
/* XXX Sanity check: the write pointer can be checked to be
|
|
still the same as the value passed as qe... -- REW */
|
|
/* udelay (5); */
|
|
while ((wp = read_fs (dev, Q_WP (q->offset))) & Q_FULL) {
|
|
fs_dprintk (FS_DEBUG_TXQ, "Found queue at %x full. Waiting.\n",
|
|
q->offset);
|
|
schedule ();
|
|
}
|
|
|
|
wp &= ~0xf;
|
|
cqe = bus_to_virt (wp);
|
|
if (qe != cqe) {
|
|
fs_dprintk (FS_DEBUG_TXQ, "q mismatch! %p %p\n", qe, cqe);
|
|
}
|
|
|
|
write_fs (dev, Q_WP(q->offset), Q_INCWRAP);
|
|
|
|
{
|
|
static int c;
|
|
if (!(c++ % 100))
|
|
{
|
|
int rp, wp;
|
|
rp = read_fs (dev, Q_RP(q->offset));
|
|
wp = read_fs (dev, Q_WP(q->offset));
|
|
fs_dprintk (FS_DEBUG_TXQ, "q at %d: %x-%x: %x entries.\n",
|
|
q->offset, rp, wp, wp-rp);
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef DEBUG_EXTRA
|
|
static struct FS_QENTRY pq[60];
|
|
static int qp;
|
|
|
|
static struct FS_BPENTRY dq[60];
|
|
static int qd;
|
|
static void *da[60];
|
|
#endif
|
|
|
|
static void submit_queue (struct fs_dev *dev, struct queue *q,
|
|
u32 cmd, u32 p1, u32 p2, u32 p3)
|
|
{
|
|
struct FS_QENTRY *qe;
|
|
|
|
qe = get_qentry (dev, q);
|
|
qe->cmd = cmd;
|
|
qe->p0 = p1;
|
|
qe->p1 = p2;
|
|
qe->p2 = p3;
|
|
submit_qentry (dev, q, qe);
|
|
|
|
#ifdef DEBUG_EXTRA
|
|
pq[qp].cmd = cmd;
|
|
pq[qp].p0 = p1;
|
|
pq[qp].p1 = p2;
|
|
pq[qp].p2 = p3;
|
|
qp++;
|
|
if (qp >= 60) qp = 0;
|
|
#endif
|
|
}
|
|
|
|
/* Test the "other" way one day... -- REW */
|
|
#if 1
|
|
#define submit_command submit_queue
|
|
#else
|
|
|
|
static void submit_command (struct fs_dev *dev, struct queue *q,
|
|
u32 cmd, u32 p1, u32 p2, u32 p3)
|
|
{
|
|
write_fs (dev, CMDR0, cmd);
|
|
write_fs (dev, CMDR1, p1);
|
|
write_fs (dev, CMDR2, p2);
|
|
write_fs (dev, CMDR3, p3);
|
|
}
|
|
#endif
|
|
|
|
|
|
|
|
static void process_return_queue (struct fs_dev *dev, struct queue *q)
|
|
{
|
|
long rq;
|
|
struct FS_QENTRY *qe;
|
|
void *tc;
|
|
|
|
while (!((rq = read_fs (dev, Q_RP(q->offset))) & Q_EMPTY)) {
|
|
fs_dprintk (FS_DEBUG_QUEUE, "reaping return queue entry at %lx\n", rq);
|
|
qe = bus_to_virt (rq);
|
|
|
|
fs_dprintk (FS_DEBUG_QUEUE, "queue entry: %08x %08x %08x %08x. (%d)\n",
|
|
qe->cmd, qe->p0, qe->p1, qe->p2, STATUS_CODE (qe));
|
|
|
|
switch (STATUS_CODE (qe)) {
|
|
case 5:
|
|
tc = bus_to_virt (qe->p0);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free tc: %p\n", tc);
|
|
kfree (tc);
|
|
break;
|
|
}
|
|
|
|
write_fs (dev, Q_RP(q->offset), Q_INCWRAP);
|
|
}
|
|
}
|
|
|
|
|
|
static void process_txdone_queue (struct fs_dev *dev, struct queue *q)
|
|
{
|
|
long rq;
|
|
long tmp;
|
|
struct FS_QENTRY *qe;
|
|
struct sk_buff *skb;
|
|
struct FS_BPENTRY *td;
|
|
|
|
while (!((rq = read_fs (dev, Q_RP(q->offset))) & Q_EMPTY)) {
|
|
fs_dprintk (FS_DEBUG_QUEUE, "reaping txdone entry at %lx\n", rq);
|
|
qe = bus_to_virt (rq);
|
|
|
|
fs_dprintk (FS_DEBUG_QUEUE, "queue entry: %08x %08x %08x %08x: %d\n",
|
|
qe->cmd, qe->p0, qe->p1, qe->p2, STATUS_CODE (qe));
|
|
|
|
if (STATUS_CODE (qe) != 2)
|
|
fs_dprintk (FS_DEBUG_TXMEM, "queue entry: %08x %08x %08x %08x: %d\n",
|
|
qe->cmd, qe->p0, qe->p1, qe->p2, STATUS_CODE (qe));
|
|
|
|
|
|
switch (STATUS_CODE (qe)) {
|
|
case 0x01: /* This is for AAL0 where we put the chip in streaming mode */
|
|
/* Fall through */
|
|
case 0x02:
|
|
/* Process a real txdone entry. */
|
|
tmp = qe->p0;
|
|
if (tmp & 0x0f)
|
|
printk (KERN_WARNING "td not aligned: %ld\n", tmp);
|
|
tmp &= ~0x0f;
|
|
td = bus_to_virt (tmp);
|
|
|
|
fs_dprintk (FS_DEBUG_QUEUE, "Pool entry: %08x %08x %08x %08x %p.\n",
|
|
td->flags, td->next, td->bsa, td->aal_bufsize, td->skb );
|
|
|
|
skb = td->skb;
|
|
if (skb == FS_VCC (ATM_SKB(skb)->vcc)->last_skb) {
|
|
FS_VCC (ATM_SKB(skb)->vcc)->last_skb = NULL;
|
|
wake_up_interruptible (& FS_VCC (ATM_SKB(skb)->vcc)->close_wait);
|
|
}
|
|
td->dev->ntxpckts--;
|
|
|
|
{
|
|
static int c=0;
|
|
|
|
if (!(c++ % 100)) {
|
|
fs_dprintk (FS_DEBUG_QSIZE, "[%d]", td->dev->ntxpckts);
|
|
}
|
|
}
|
|
|
|
atomic_inc(&ATM_SKB(skb)->vcc->stats->tx);
|
|
|
|
fs_dprintk (FS_DEBUG_TXMEM, "i");
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free t-skb: %p\n", skb);
|
|
fs_kfree_skb (skb);
|
|
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free trans-d: %p\n", td);
|
|
memset (td, ATM_POISON_FREE, sizeof(struct FS_BPENTRY));
|
|
kfree (td);
|
|
break;
|
|
default:
|
|
/* Here we get the tx purge inhibit command ... */
|
|
/* Action, I believe, is "don't do anything". -- REW */
|
|
;
|
|
}
|
|
|
|
write_fs (dev, Q_RP(q->offset), Q_INCWRAP);
|
|
}
|
|
}
|
|
|
|
|
|
static void process_incoming (struct fs_dev *dev, struct queue *q)
|
|
{
|
|
long rq;
|
|
struct FS_QENTRY *qe;
|
|
struct FS_BPENTRY *pe;
|
|
struct sk_buff *skb;
|
|
unsigned int channo;
|
|
struct atm_vcc *atm_vcc;
|
|
|
|
while (!((rq = read_fs (dev, Q_RP(q->offset))) & Q_EMPTY)) {
|
|
fs_dprintk (FS_DEBUG_QUEUE, "reaping incoming queue entry at %lx\n", rq);
|
|
qe = bus_to_virt (rq);
|
|
|
|
fs_dprintk (FS_DEBUG_QUEUE, "queue entry: %08x %08x %08x %08x. ",
|
|
qe->cmd, qe->p0, qe->p1, qe->p2);
|
|
|
|
fs_dprintk (FS_DEBUG_QUEUE, "-> %x: %s\n",
|
|
STATUS_CODE (qe),
|
|
res_strings[STATUS_CODE(qe)]);
|
|
|
|
pe = bus_to_virt (qe->p0);
|
|
fs_dprintk (FS_DEBUG_QUEUE, "Pool entry: %08x %08x %08x %08x %p %p.\n",
|
|
pe->flags, pe->next, pe->bsa, pe->aal_bufsize,
|
|
pe->skb, pe->fp);
|
|
|
|
channo = qe->cmd & 0xffff;
|
|
|
|
if (channo < dev->nchannels)
|
|
atm_vcc = dev->atm_vccs[channo];
|
|
else
|
|
atm_vcc = NULL;
|
|
|
|
/* Single buffer packet */
|
|
switch (STATUS_CODE (qe)) {
|
|
case 0x1:
|
|
/* Fall through for streaming mode */
|
|
case 0x2:/* Packet received OK.... */
|
|
if (atm_vcc) {
|
|
skb = pe->skb;
|
|
pe->fp->n--;
|
|
#if 0
|
|
fs_dprintk (FS_DEBUG_QUEUE, "Got skb: %p\n", skb);
|
|
if (FS_DEBUG_QUEUE & fs_debug) my_hd (bus_to_virt (pe->bsa), 0x20);
|
|
#endif
|
|
skb_put (skb, qe->p1 & 0xffff);
|
|
ATM_SKB(skb)->vcc = atm_vcc;
|
|
atomic_inc(&atm_vcc->stats->rx);
|
|
__net_timestamp(skb);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p (pushed)\n", skb);
|
|
atm_vcc->push (atm_vcc, skb);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", pe);
|
|
kfree (pe);
|
|
} else {
|
|
printk (KERN_ERR "Got a receive on a non-open channel %d.\n", channo);
|
|
}
|
|
break;
|
|
case 0x17:/* AAL 5 CRC32 error. IFF the length field is nonzero, a buffer
|
|
has been consumed and needs to be processed. -- REW */
|
|
if (qe->p1 & 0xffff) {
|
|
pe = bus_to_virt (qe->p0);
|
|
pe->fp->n--;
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", pe->skb);
|
|
dev_kfree_skb_any (pe->skb);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", pe);
|
|
kfree (pe);
|
|
}
|
|
if (atm_vcc)
|
|
atomic_inc(&atm_vcc->stats->rx_drop);
|
|
break;
|
|
case 0x1f: /* Reassembly abort: no buffers. */
|
|
/* Silently increment error counter. */
|
|
if (atm_vcc)
|
|
atomic_inc(&atm_vcc->stats->rx_drop);
|
|
break;
|
|
default: /* Hmm. Haven't written the code to handle the others yet... -- REW */
|
|
printk (KERN_WARNING "Don't know what to do with RX status %x: %s.\n",
|
|
STATUS_CODE(qe), res_strings[STATUS_CODE (qe)]);
|
|
}
|
|
write_fs (dev, Q_RP(q->offset), Q_INCWRAP);
|
|
}
|
|
}
|
|
|
|
|
|
|
|
#define DO_DIRECTION(tp) ((tp)->traffic_class != ATM_NONE)
|
|
|
|
static int fs_open(struct atm_vcc *atm_vcc)
|
|
{
|
|
struct fs_dev *dev;
|
|
struct fs_vcc *vcc;
|
|
struct fs_transmit_config *tc;
|
|
struct atm_trafprm * txtp;
|
|
struct atm_trafprm * rxtp;
|
|
/* struct fs_receive_config *rc;*/
|
|
/* struct FS_QENTRY *qe; */
|
|
int error;
|
|
int bfp;
|
|
int to;
|
|
unsigned short tmc0;
|
|
short vpi = atm_vcc->vpi;
|
|
int vci = atm_vcc->vci;
|
|
|
|
func_enter ();
|
|
|
|
dev = FS_DEV(atm_vcc->dev);
|
|
fs_dprintk (FS_DEBUG_OPEN, "fs: open on dev: %p, vcc at %p\n",
|
|
dev, atm_vcc);
|
|
|
|
if (vci != ATM_VPI_UNSPEC && vpi != ATM_VCI_UNSPEC)
|
|
set_bit(ATM_VF_ADDR, &atm_vcc->flags);
|
|
|
|
if ((atm_vcc->qos.aal != ATM_AAL5) &&
|
|
(atm_vcc->qos.aal != ATM_AAL2))
|
|
return -EINVAL; /* XXX AAL0 */
|
|
|
|
fs_dprintk (FS_DEBUG_OPEN, "fs: (itf %d): open %d.%d\n",
|
|
atm_vcc->dev->number, atm_vcc->vpi, atm_vcc->vci);
|
|
|
|
/* XXX handle qos parameters (rate limiting) ? */
|
|
|
|
vcc = kmalloc(sizeof(struct fs_vcc), GFP_KERNEL);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Alloc VCC: %p(%Zd)\n", vcc, sizeof(struct fs_vcc));
|
|
if (!vcc) {
|
|
clear_bit(ATM_VF_ADDR, &atm_vcc->flags);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
atm_vcc->dev_data = vcc;
|
|
vcc->last_skb = NULL;
|
|
|
|
init_waitqueue_head (&vcc->close_wait);
|
|
|
|
txtp = &atm_vcc->qos.txtp;
|
|
rxtp = &atm_vcc->qos.rxtp;
|
|
|
|
if (!test_bit(ATM_VF_PARTIAL, &atm_vcc->flags)) {
|
|
if (IS_FS50(dev)) {
|
|
/* Increment the channel numer: take a free one next time. */
|
|
for (to=33;to;to--, dev->channo++) {
|
|
/* We only have 32 channels */
|
|
if (dev->channo >= 32)
|
|
dev->channo = 0;
|
|
/* If we need to do RX, AND the RX is inuse, try the next */
|
|
if (DO_DIRECTION(rxtp) && dev->atm_vccs[dev->channo])
|
|
continue;
|
|
/* If we need to do TX, AND the TX is inuse, try the next */
|
|
if (DO_DIRECTION(txtp) && test_bit (dev->channo, dev->tx_inuse))
|
|
continue;
|
|
/* Ok, both are free! (or not needed) */
|
|
break;
|
|
}
|
|
if (!to) {
|
|
printk ("No more free channels for FS50..\n");
|
|
return -EBUSY;
|
|
}
|
|
vcc->channo = dev->channo;
|
|
dev->channo &= dev->channel_mask;
|
|
|
|
} else {
|
|
vcc->channo = (vpi << FS155_VCI_BITS) | (vci);
|
|
if (((DO_DIRECTION(rxtp) && dev->atm_vccs[vcc->channo])) ||
|
|
( DO_DIRECTION(txtp) && test_bit (vcc->channo, dev->tx_inuse))) {
|
|
printk ("Channel is in use for FS155.\n");
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
fs_dprintk (FS_DEBUG_OPEN, "OK. Allocated channel %x(%d).\n",
|
|
vcc->channo, vcc->channo);
|
|
}
|
|
|
|
if (DO_DIRECTION (txtp)) {
|
|
tc = kmalloc (sizeof (struct fs_transmit_config), GFP_KERNEL);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Alloc tc: %p(%Zd)\n",
|
|
tc, sizeof (struct fs_transmit_config));
|
|
if (!tc) {
|
|
fs_dprintk (FS_DEBUG_OPEN, "fs: can't alloc transmit_config.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Allocate the "open" entry from the high priority txq. This makes
|
|
it most likely that the chip will notice it. It also prevents us
|
|
from having to wait for completion. On the other hand, we may
|
|
need to wait for completion anyway, to see if it completed
|
|
successfully. */
|
|
|
|
switch (atm_vcc->qos.aal) {
|
|
case ATM_AAL2:
|
|
case ATM_AAL0:
|
|
tc->flags = 0
|
|
| TC_FLAGS_TRANSPARENT_PAYLOAD
|
|
| TC_FLAGS_PACKET
|
|
| (1 << 28)
|
|
| TC_FLAGS_TYPE_UBR /* XXX Change to VBR -- PVDL */
|
|
| TC_FLAGS_CAL0;
|
|
break;
|
|
case ATM_AAL5:
|
|
tc->flags = 0
|
|
| TC_FLAGS_AAL5
|
|
| TC_FLAGS_PACKET /* ??? */
|
|
| TC_FLAGS_TYPE_CBR
|
|
| TC_FLAGS_CAL0;
|
|
break;
|
|
default:
|
|
printk ("Unknown aal: %d\n", atm_vcc->qos.aal);
|
|
tc->flags = 0;
|
|
}
|
|
/* Docs are vague about this atm_hdr field. By the way, the FS
|
|
* chip makes odd errors if lower bits are set.... -- REW */
|
|
tc->atm_hdr = (vpi << 20) | (vci << 4);
|
|
tmc0 = 0;
|
|
{
|
|
int pcr = atm_pcr_goal (txtp);
|
|
|
|
fs_dprintk (FS_DEBUG_OPEN, "pcr = %d.\n", pcr);
|
|
|
|
/* XXX Hmm. officially we're only allowed to do this if rounding
|
|
is round_down -- REW */
|
|
if (IS_FS50(dev)) {
|
|
if (pcr > 51840000/53/8) pcr = 51840000/53/8;
|
|
} else {
|
|
if (pcr > 155520000/53/8) pcr = 155520000/53/8;
|
|
}
|
|
if (!pcr) {
|
|
/* no rate cap */
|
|
tmc0 = IS_FS50(dev)?0x61BE:0x64c9; /* Just copied over the bits from Fujitsu -- REW */
|
|
} else {
|
|
int r;
|
|
if (pcr < 0) {
|
|
r = ROUND_DOWN;
|
|
pcr = -pcr;
|
|
} else {
|
|
r = ROUND_UP;
|
|
}
|
|
error = make_rate (pcr, r, &tmc0, NULL);
|
|
if (error) {
|
|
kfree(tc);
|
|
return error;
|
|
}
|
|
}
|
|
fs_dprintk (FS_DEBUG_OPEN, "pcr = %d.\n", pcr);
|
|
}
|
|
|
|
tc->TMC[0] = tmc0 | 0x4000;
|
|
tc->TMC[1] = 0; /* Unused */
|
|
tc->TMC[2] = 0; /* Unused */
|
|
tc->TMC[3] = 0; /* Unused */
|
|
|
|
tc->spec = 0; /* UTOPIA address, UDF, HEC: Unused -> 0 */
|
|
tc->rtag[0] = 0; /* What should I do with routing tags???
|
|
-- Not used -- AS -- Thanks -- REW*/
|
|
tc->rtag[1] = 0;
|
|
tc->rtag[2] = 0;
|
|
|
|
if (fs_debug & FS_DEBUG_OPEN) {
|
|
fs_dprintk (FS_DEBUG_OPEN, "TX config record:\n");
|
|
my_hd (tc, sizeof (*tc));
|
|
}
|
|
|
|
/* We now use the "submit_command" function to submit commands to
|
|
the firestream. There is a define up near the definition of
|
|
that routine that switches this routine between immediate write
|
|
to the immediate command registers and queuing the commands in
|
|
the HPTXQ for execution. This last technique might be more
|
|
efficient if we know we're going to submit a whole lot of
|
|
commands in one go, but this driver is not setup to be able to
|
|
use such a construct. So it probably doen't matter much right
|
|
now. -- REW */
|
|
|
|
/* The command is IMMediate and INQueue. The parameters are out-of-line.. */
|
|
submit_command (dev, &dev->hp_txq,
|
|
QE_CMD_CONFIG_TX | QE_CMD_IMM_INQ | vcc->channo,
|
|
virt_to_bus (tc), 0, 0);
|
|
|
|
submit_command (dev, &dev->hp_txq,
|
|
QE_CMD_TX_EN | QE_CMD_IMM_INQ | vcc->channo,
|
|
0, 0, 0);
|
|
set_bit (vcc->channo, dev->tx_inuse);
|
|
}
|
|
|
|
if (DO_DIRECTION (rxtp)) {
|
|
dev->atm_vccs[vcc->channo] = atm_vcc;
|
|
|
|
for (bfp = 0;bfp < FS_NR_FREE_POOLS; bfp++)
|
|
if (atm_vcc->qos.rxtp.max_sdu <= dev->rx_fp[bfp].bufsize) break;
|
|
if (bfp >= FS_NR_FREE_POOLS) {
|
|
fs_dprintk (FS_DEBUG_OPEN, "No free pool fits sdu: %d.\n",
|
|
atm_vcc->qos.rxtp.max_sdu);
|
|
/* XXX Cleanup? -- Would just calling fs_close work??? -- REW */
|
|
|
|
/* XXX clear tx inuse. Close TX part? */
|
|
dev->atm_vccs[vcc->channo] = NULL;
|
|
kfree (vcc);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (atm_vcc->qos.aal) {
|
|
case ATM_AAL0:
|
|
case ATM_AAL2:
|
|
submit_command (dev, &dev->hp_txq,
|
|
QE_CMD_CONFIG_RX | QE_CMD_IMM_INQ | vcc->channo,
|
|
RC_FLAGS_TRANSP |
|
|
RC_FLAGS_BFPS_BFP * bfp |
|
|
RC_FLAGS_RXBM_PSB, 0, 0);
|
|
break;
|
|
case ATM_AAL5:
|
|
submit_command (dev, &dev->hp_txq,
|
|
QE_CMD_CONFIG_RX | QE_CMD_IMM_INQ | vcc->channo,
|
|
RC_FLAGS_AAL5 |
|
|
RC_FLAGS_BFPS_BFP * bfp |
|
|
RC_FLAGS_RXBM_PSB, 0, 0);
|
|
break;
|
|
};
|
|
if (IS_FS50 (dev)) {
|
|
submit_command (dev, &dev->hp_txq,
|
|
QE_CMD_REG_WR | QE_CMD_IMM_INQ,
|
|
0x80 + vcc->channo,
|
|
(vpi << 16) | vci, 0 ); /* XXX -- Use defines. */
|
|
}
|
|
submit_command (dev, &dev->hp_txq,
|
|
QE_CMD_RX_EN | QE_CMD_IMM_INQ | vcc->channo,
|
|
0, 0, 0);
|
|
}
|
|
|
|
/* Indicate we're done! */
|
|
set_bit(ATM_VF_READY, &atm_vcc->flags);
|
|
|
|
func_exit ();
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void fs_close(struct atm_vcc *atm_vcc)
|
|
{
|
|
struct fs_dev *dev = FS_DEV (atm_vcc->dev);
|
|
struct fs_vcc *vcc = FS_VCC (atm_vcc);
|
|
struct atm_trafprm * txtp;
|
|
struct atm_trafprm * rxtp;
|
|
|
|
func_enter ();
|
|
|
|
clear_bit(ATM_VF_READY, &atm_vcc->flags);
|
|
|
|
fs_dprintk (FS_DEBUG_QSIZE, "--==**[%d]**==--", dev->ntxpckts);
|
|
if (vcc->last_skb) {
|
|
fs_dprintk (FS_DEBUG_QUEUE, "Waiting for skb %p to be sent.\n",
|
|
vcc->last_skb);
|
|
/* We're going to wait for the last packet to get sent on this VC. It would
|
|
be impolite not to send them don't you think?
|
|
XXX
|
|
We don't know which packets didn't get sent. So if we get interrupted in
|
|
this sleep_on, we'll lose any reference to these packets. Memory leak!
|
|
On the other hand, it's awfully convenient that we can abort a "close" that
|
|
is taking too long. Maybe just use non-interruptible sleep on? -- REW */
|
|
wait_event_interruptible(vcc->close_wait, !vcc->last_skb);
|
|
}
|
|
|
|
txtp = &atm_vcc->qos.txtp;
|
|
rxtp = &atm_vcc->qos.rxtp;
|
|
|
|
|
|
/* See App note XXX (Unpublished as of now) for the reason for the
|
|
removal of the "CMD_IMM_INQ" part of the TX_PURGE_INH... -- REW */
|
|
|
|
if (DO_DIRECTION (txtp)) {
|
|
submit_command (dev, &dev->hp_txq,
|
|
QE_CMD_TX_PURGE_INH | /*QE_CMD_IMM_INQ|*/ vcc->channo, 0,0,0);
|
|
clear_bit (vcc->channo, dev->tx_inuse);
|
|
}
|
|
|
|
if (DO_DIRECTION (rxtp)) {
|
|
submit_command (dev, &dev->hp_txq,
|
|
QE_CMD_RX_PURGE_INH | QE_CMD_IMM_INQ | vcc->channo, 0,0,0);
|
|
dev->atm_vccs [vcc->channo] = NULL;
|
|
|
|
/* This means that this is configured as a receive channel */
|
|
if (IS_FS50 (dev)) {
|
|
/* Disable the receive filter. Is 0/0 indeed an invalid receive
|
|
channel? -- REW. Yes it is. -- Hang. Ok. I'll use -1
|
|
(0xfff...) -- REW */
|
|
submit_command (dev, &dev->hp_txq,
|
|
QE_CMD_REG_WR | QE_CMD_IMM_INQ,
|
|
0x80 + vcc->channo, -1, 0 );
|
|
}
|
|
}
|
|
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free vcc: %p\n", vcc);
|
|
kfree (vcc);
|
|
|
|
func_exit ();
|
|
}
|
|
|
|
|
|
static int fs_send (struct atm_vcc *atm_vcc, struct sk_buff *skb)
|
|
{
|
|
struct fs_dev *dev = FS_DEV (atm_vcc->dev);
|
|
struct fs_vcc *vcc = FS_VCC (atm_vcc);
|
|
struct FS_BPENTRY *td;
|
|
|
|
func_enter ();
|
|
|
|
fs_dprintk (FS_DEBUG_TXMEM, "I");
|
|
fs_dprintk (FS_DEBUG_SEND, "Send: atm_vcc %p skb %p vcc %p dev %p\n",
|
|
atm_vcc, skb, vcc, dev);
|
|
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Alloc t-skb: %p (atm_send)\n", skb);
|
|
|
|
ATM_SKB(skb)->vcc = atm_vcc;
|
|
|
|
vcc->last_skb = skb;
|
|
|
|
td = kmalloc (sizeof (struct FS_BPENTRY), GFP_ATOMIC);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Alloc transd: %p(%Zd)\n", td, sizeof (struct FS_BPENTRY));
|
|
if (!td) {
|
|
/* Oops out of mem */
|
|
return -ENOMEM;
|
|
}
|
|
|
|
fs_dprintk (FS_DEBUG_SEND, "first word in buffer: %x\n",
|
|
*(int *) skb->data);
|
|
|
|
td->flags = TD_EPI | TD_DATA | skb->len;
|
|
td->next = 0;
|
|
td->bsa = virt_to_bus (skb->data);
|
|
td->skb = skb;
|
|
td->dev = dev;
|
|
dev->ntxpckts++;
|
|
|
|
#ifdef DEBUG_EXTRA
|
|
da[qd] = td;
|
|
dq[qd].flags = td->flags;
|
|
dq[qd].next = td->next;
|
|
dq[qd].bsa = td->bsa;
|
|
dq[qd].skb = td->skb;
|
|
dq[qd].dev = td->dev;
|
|
qd++;
|
|
if (qd >= 60) qd = 0;
|
|
#endif
|
|
|
|
submit_queue (dev, &dev->hp_txq,
|
|
QE_TRANSMIT_DE | vcc->channo,
|
|
virt_to_bus (td), 0,
|
|
virt_to_bus (td));
|
|
|
|
fs_dprintk (FS_DEBUG_QUEUE, "in send: txq %d txrq %d\n",
|
|
read_fs (dev, Q_EA (dev->hp_txq.offset)) -
|
|
read_fs (dev, Q_SA (dev->hp_txq.offset)),
|
|
read_fs (dev, Q_EA (dev->tx_relq.offset)) -
|
|
read_fs (dev, Q_SA (dev->tx_relq.offset)));
|
|
|
|
func_exit ();
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Some function placeholders for functions we don't yet support. */
|
|
|
|
#if 0
|
|
static int fs_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg)
|
|
{
|
|
func_enter ();
|
|
func_exit ();
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
|
|
|
|
static int fs_getsockopt(struct atm_vcc *vcc,int level,int optname,
|
|
void __user *optval,int optlen)
|
|
{
|
|
func_enter ();
|
|
func_exit ();
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int fs_setsockopt(struct atm_vcc *vcc,int level,int optname,
|
|
void __user *optval,unsigned int optlen)
|
|
{
|
|
func_enter ();
|
|
func_exit ();
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void fs_phy_put(struct atm_dev *dev,unsigned char value,
|
|
unsigned long addr)
|
|
{
|
|
func_enter ();
|
|
func_exit ();
|
|
}
|
|
|
|
|
|
static unsigned char fs_phy_get(struct atm_dev *dev,unsigned long addr)
|
|
{
|
|
func_enter ();
|
|
func_exit ();
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int fs_change_qos(struct atm_vcc *vcc,struct atm_qos *qos,int flags)
|
|
{
|
|
func_enter ();
|
|
func_exit ();
|
|
return 0;
|
|
};
|
|
|
|
#endif
|
|
|
|
|
|
static const struct atmdev_ops ops = {
|
|
.open = fs_open,
|
|
.close = fs_close,
|
|
.send = fs_send,
|
|
.owner = THIS_MODULE,
|
|
/* ioctl: fs_ioctl, */
|
|
/* getsockopt: fs_getsockopt, */
|
|
/* setsockopt: fs_setsockopt, */
|
|
/* change_qos: fs_change_qos, */
|
|
|
|
/* For now implement these internally here... */
|
|
/* phy_put: fs_phy_put, */
|
|
/* phy_get: fs_phy_get, */
|
|
};
|
|
|
|
|
|
static void undocumented_pci_fix(struct pci_dev *pdev)
|
|
{
|
|
u32 tint;
|
|
|
|
/* The Windows driver says: */
|
|
/* Switch off FireStream Retry Limit Threshold
|
|
*/
|
|
|
|
/* The register at 0x28 is documented as "reserved", no further
|
|
comments. */
|
|
|
|
pci_read_config_dword (pdev, 0x28, &tint);
|
|
if (tint != 0x80) {
|
|
tint = 0x80;
|
|
pci_write_config_dword (pdev, 0x28, tint);
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/**************************************************************************
|
|
* PHY routines *
|
|
**************************************************************************/
|
|
|
|
static void write_phy(struct fs_dev *dev, int regnum, int val)
|
|
{
|
|
submit_command (dev, &dev->hp_txq, QE_CMD_PRP_WR | QE_CMD_IMM_INQ,
|
|
regnum, val, 0);
|
|
}
|
|
|
|
static int init_phy(struct fs_dev *dev, struct reginit_item *reginit)
|
|
{
|
|
int i;
|
|
|
|
func_enter ();
|
|
while (reginit->reg != PHY_EOF) {
|
|
if (reginit->reg == PHY_CLEARALL) {
|
|
/* "PHY_CLEARALL means clear all registers. Numregisters is in "val". */
|
|
for (i=0;i<reginit->val;i++) {
|
|
write_phy (dev, i, 0);
|
|
}
|
|
} else {
|
|
write_phy (dev, reginit->reg, reginit->val);
|
|
}
|
|
reginit++;
|
|
}
|
|
func_exit ();
|
|
return 0;
|
|
}
|
|
|
|
static void reset_chip (struct fs_dev *dev)
|
|
{
|
|
int i;
|
|
|
|
write_fs (dev, SARMODE0, SARMODE0_SRTS0);
|
|
|
|
/* Undocumented delay */
|
|
udelay (128);
|
|
|
|
/* The "internal registers are documented to all reset to zero, but
|
|
comments & code in the Windows driver indicates that the pools are
|
|
NOT reset. */
|
|
for (i=0;i < FS_NR_FREE_POOLS;i++) {
|
|
write_fs (dev, FP_CNF (RXB_FP(i)), 0);
|
|
write_fs (dev, FP_SA (RXB_FP(i)), 0);
|
|
write_fs (dev, FP_EA (RXB_FP(i)), 0);
|
|
write_fs (dev, FP_CNT (RXB_FP(i)), 0);
|
|
write_fs (dev, FP_CTU (RXB_FP(i)), 0);
|
|
}
|
|
|
|
/* The same goes for the match channel registers, although those are
|
|
NOT documented that way in the Windows driver. -- REW */
|
|
/* The Windows driver DOES write 0 to these registers somewhere in
|
|
the init sequence. However, a small hardware-feature, will
|
|
prevent reception of data on VPI/VCI = 0/0 (Unless the channel
|
|
allocated happens to have no disabled channels that have a lower
|
|
number. -- REW */
|
|
|
|
/* Clear the match channel registers. */
|
|
if (IS_FS50 (dev)) {
|
|
for (i=0;i<FS50_NR_CHANNELS;i++) {
|
|
write_fs (dev, 0x200 + i * 4, -1);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void *aligned_kmalloc(int size, gfp_t flags, int alignment)
|
|
{
|
|
void *t;
|
|
|
|
if (alignment <= 0x10) {
|
|
t = kmalloc (size, flags);
|
|
if ((unsigned long)t & (alignment-1)) {
|
|
printk ("Kmalloc doesn't align things correctly! %p\n", t);
|
|
kfree (t);
|
|
return aligned_kmalloc (size, flags, alignment * 4);
|
|
}
|
|
return t;
|
|
}
|
|
printk (KERN_ERR "Request for > 0x10 alignment not yet implemented (hard!)\n");
|
|
return NULL;
|
|
}
|
|
|
|
static int init_q(struct fs_dev *dev, struct queue *txq, int queue,
|
|
int nentries, int is_rq)
|
|
{
|
|
int sz = nentries * sizeof (struct FS_QENTRY);
|
|
struct FS_QENTRY *p;
|
|
|
|
func_enter ();
|
|
|
|
fs_dprintk (FS_DEBUG_INIT, "Inititing queue at %x: %d entries:\n",
|
|
queue, nentries);
|
|
|
|
p = aligned_kmalloc (sz, GFP_KERNEL, 0x10);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Alloc queue: %p(%d)\n", p, sz);
|
|
|
|
if (!p) return 0;
|
|
|
|
write_fs (dev, Q_SA(queue), virt_to_bus(p));
|
|
write_fs (dev, Q_EA(queue), virt_to_bus(p+nentries-1));
|
|
write_fs (dev, Q_WP(queue), virt_to_bus(p));
|
|
write_fs (dev, Q_RP(queue), virt_to_bus(p));
|
|
if (is_rq) {
|
|
/* Configuration for the receive queue: 0: interrupt immediately,
|
|
no pre-warning to empty queues: We do our best to keep the
|
|
queue filled anyway. */
|
|
write_fs (dev, Q_CNF(queue), 0 );
|
|
}
|
|
|
|
txq->sa = p;
|
|
txq->ea = p;
|
|
txq->offset = queue;
|
|
|
|
func_exit ();
|
|
return 1;
|
|
}
|
|
|
|
|
|
static int init_fp(struct fs_dev *dev, struct freepool *fp, int queue,
|
|
int bufsize, int nr_buffers)
|
|
{
|
|
func_enter ();
|
|
|
|
fs_dprintk (FS_DEBUG_INIT, "Inititing free pool at %x:\n", queue);
|
|
|
|
write_fs (dev, FP_CNF(queue), (bufsize * RBFP_RBS) | RBFP_RBSVAL | RBFP_CME);
|
|
write_fs (dev, FP_SA(queue), 0);
|
|
write_fs (dev, FP_EA(queue), 0);
|
|
write_fs (dev, FP_CTU(queue), 0);
|
|
write_fs (dev, FP_CNT(queue), 0);
|
|
|
|
fp->offset = queue;
|
|
fp->bufsize = bufsize;
|
|
fp->nr_buffers = nr_buffers;
|
|
|
|
func_exit ();
|
|
return 1;
|
|
}
|
|
|
|
|
|
static inline int nr_buffers_in_freepool (struct fs_dev *dev, struct freepool *fp)
|
|
{
|
|
#if 0
|
|
/* This seems to be unreliable.... */
|
|
return read_fs (dev, FP_CNT (fp->offset));
|
|
#else
|
|
return fp->n;
|
|
#endif
|
|
}
|
|
|
|
|
|
/* Check if this gets going again if a pool ever runs out. -- Yes, it
|
|
does. I've seen "receive abort: no buffers" and things started
|
|
working again after that... -- REW */
|
|
|
|
static void top_off_fp (struct fs_dev *dev, struct freepool *fp,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct FS_BPENTRY *qe, *ne;
|
|
struct sk_buff *skb;
|
|
int n = 0;
|
|
u32 qe_tmp;
|
|
|
|
fs_dprintk (FS_DEBUG_QUEUE, "Topping off queue at %x (%d-%d/%d)\n",
|
|
fp->offset, read_fs (dev, FP_CNT (fp->offset)), fp->n,
|
|
fp->nr_buffers);
|
|
while (nr_buffers_in_freepool(dev, fp) < fp->nr_buffers) {
|
|
|
|
skb = alloc_skb (fp->bufsize, gfp_flags);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Alloc rec-skb: %p(%d)\n", skb, fp->bufsize);
|
|
if (!skb) break;
|
|
ne = kmalloc (sizeof (struct FS_BPENTRY), gfp_flags);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Alloc rec-d: %p(%Zd)\n", ne, sizeof (struct FS_BPENTRY));
|
|
if (!ne) {
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", skb);
|
|
dev_kfree_skb_any (skb);
|
|
break;
|
|
}
|
|
|
|
fs_dprintk (FS_DEBUG_QUEUE, "Adding skb %p desc %p -> %p(%p) ",
|
|
skb, ne, skb->data, skb->head);
|
|
n++;
|
|
ne->flags = FP_FLAGS_EPI | fp->bufsize;
|
|
ne->next = virt_to_bus (NULL);
|
|
ne->bsa = virt_to_bus (skb->data);
|
|
ne->aal_bufsize = fp->bufsize;
|
|
ne->skb = skb;
|
|
ne->fp = fp;
|
|
|
|
/*
|
|
* FIXME: following code encodes and decodes
|
|
* machine pointers (could be 64-bit) into a
|
|
* 32-bit register.
|
|
*/
|
|
|
|
qe_tmp = read_fs (dev, FP_EA(fp->offset));
|
|
fs_dprintk (FS_DEBUG_QUEUE, "link at %x\n", qe_tmp);
|
|
if (qe_tmp) {
|
|
qe = bus_to_virt ((long) qe_tmp);
|
|
qe->next = virt_to_bus(ne);
|
|
qe->flags &= ~FP_FLAGS_EPI;
|
|
} else
|
|
write_fs (dev, FP_SA(fp->offset), virt_to_bus(ne));
|
|
|
|
write_fs (dev, FP_EA(fp->offset), virt_to_bus (ne));
|
|
fp->n++; /* XXX Atomic_inc? */
|
|
write_fs (dev, FP_CTU(fp->offset), 1);
|
|
}
|
|
|
|
fs_dprintk (FS_DEBUG_QUEUE, "Added %d entries. \n", n);
|
|
}
|
|
|
|
static void free_queue(struct fs_dev *dev, struct queue *txq)
|
|
{
|
|
func_enter ();
|
|
|
|
write_fs (dev, Q_SA(txq->offset), 0);
|
|
write_fs (dev, Q_EA(txq->offset), 0);
|
|
write_fs (dev, Q_RP(txq->offset), 0);
|
|
write_fs (dev, Q_WP(txq->offset), 0);
|
|
/* Configuration ? */
|
|
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free queue: %p\n", txq->sa);
|
|
kfree (txq->sa);
|
|
|
|
func_exit ();
|
|
}
|
|
|
|
static void free_freepool(struct fs_dev *dev, struct freepool *fp)
|
|
{
|
|
func_enter ();
|
|
|
|
write_fs (dev, FP_CNF(fp->offset), 0);
|
|
write_fs (dev, FP_SA (fp->offset), 0);
|
|
write_fs (dev, FP_EA (fp->offset), 0);
|
|
write_fs (dev, FP_CNT(fp->offset), 0);
|
|
write_fs (dev, FP_CTU(fp->offset), 0);
|
|
|
|
func_exit ();
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t fs_irq (int irq, void *dev_id)
|
|
{
|
|
int i;
|
|
u32 status;
|
|
struct fs_dev *dev = dev_id;
|
|
|
|
status = read_fs (dev, ISR);
|
|
if (!status)
|
|
return IRQ_NONE;
|
|
|
|
func_enter ();
|
|
|
|
#ifdef IRQ_RATE_LIMIT
|
|
/* Aaargh! I'm ashamed. This costs more lines-of-code than the actual
|
|
interrupt routine!. (Well, used to when I wrote that comment) -- REW */
|
|
{
|
|
static int lastjif;
|
|
static int nintr=0;
|
|
|
|
if (lastjif == jiffies) {
|
|
if (++nintr > IRQ_RATE_LIMIT) {
|
|
free_irq (dev->irq, dev_id);
|
|
printk (KERN_ERR "fs: Too many interrupts. Turning off interrupt %d.\n",
|
|
dev->irq);
|
|
}
|
|
} else {
|
|
lastjif = jiffies;
|
|
nintr = 0;
|
|
}
|
|
}
|
|
#endif
|
|
fs_dprintk (FS_DEBUG_QUEUE, "in intr: txq %d txrq %d\n",
|
|
read_fs (dev, Q_EA (dev->hp_txq.offset)) -
|
|
read_fs (dev, Q_SA (dev->hp_txq.offset)),
|
|
read_fs (dev, Q_EA (dev->tx_relq.offset)) -
|
|
read_fs (dev, Q_SA (dev->tx_relq.offset)));
|
|
|
|
/* print the bits in the ISR register. */
|
|
if (fs_debug & FS_DEBUG_IRQ) {
|
|
/* The FS_DEBUG things are unnecessary here. But this way it is
|
|
clear for grep that these are debug prints. */
|
|
fs_dprintk (FS_DEBUG_IRQ, "IRQ status:");
|
|
for (i=0;i<27;i++)
|
|
if (status & (1 << i))
|
|
fs_dprintk (FS_DEBUG_IRQ, " %s", irq_bitname[i]);
|
|
fs_dprintk (FS_DEBUG_IRQ, "\n");
|
|
}
|
|
|
|
if (status & ISR_RBRQ0_W) {
|
|
fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (0)!!!!\n");
|
|
process_incoming (dev, &dev->rx_rq[0]);
|
|
/* items mentioned on RBRQ0 are from FP 0 or 1. */
|
|
top_off_fp (dev, &dev->rx_fp[0], GFP_ATOMIC);
|
|
top_off_fp (dev, &dev->rx_fp[1], GFP_ATOMIC);
|
|
}
|
|
|
|
if (status & ISR_RBRQ1_W) {
|
|
fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (1)!!!!\n");
|
|
process_incoming (dev, &dev->rx_rq[1]);
|
|
top_off_fp (dev, &dev->rx_fp[2], GFP_ATOMIC);
|
|
top_off_fp (dev, &dev->rx_fp[3], GFP_ATOMIC);
|
|
}
|
|
|
|
if (status & ISR_RBRQ2_W) {
|
|
fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (2)!!!!\n");
|
|
process_incoming (dev, &dev->rx_rq[2]);
|
|
top_off_fp (dev, &dev->rx_fp[4], GFP_ATOMIC);
|
|
top_off_fp (dev, &dev->rx_fp[5], GFP_ATOMIC);
|
|
}
|
|
|
|
if (status & ISR_RBRQ3_W) {
|
|
fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (3)!!!!\n");
|
|
process_incoming (dev, &dev->rx_rq[3]);
|
|
top_off_fp (dev, &dev->rx_fp[6], GFP_ATOMIC);
|
|
top_off_fp (dev, &dev->rx_fp[7], GFP_ATOMIC);
|
|
}
|
|
|
|
if (status & ISR_CSQ_W) {
|
|
fs_dprintk (FS_DEBUG_IRQ, "Command executed ok!\n");
|
|
process_return_queue (dev, &dev->st_q);
|
|
}
|
|
|
|
if (status & ISR_TBRQ_W) {
|
|
fs_dprintk (FS_DEBUG_IRQ, "Data tramsitted!\n");
|
|
process_txdone_queue (dev, &dev->tx_relq);
|
|
}
|
|
|
|
func_exit ();
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
#ifdef FS_POLL_FREQ
|
|
static void fs_poll (unsigned long data)
|
|
{
|
|
struct fs_dev *dev = (struct fs_dev *) data;
|
|
|
|
fs_irq (0, dev);
|
|
dev->timer.expires = jiffies + FS_POLL_FREQ;
|
|
add_timer (&dev->timer);
|
|
}
|
|
#endif
|
|
|
|
static int fs_init(struct fs_dev *dev)
|
|
{
|
|
struct pci_dev *pci_dev;
|
|
int isr, to;
|
|
int i;
|
|
|
|
func_enter ();
|
|
pci_dev = dev->pci_dev;
|
|
|
|
printk (KERN_INFO "found a FireStream %d card, base %16llx, irq%d.\n",
|
|
IS_FS50(dev)?50:155,
|
|
(unsigned long long)pci_resource_start(pci_dev, 0),
|
|
dev->pci_dev->irq);
|
|
|
|
if (fs_debug & FS_DEBUG_INIT)
|
|
my_hd ((unsigned char *) dev, sizeof (*dev));
|
|
|
|
undocumented_pci_fix (pci_dev);
|
|
|
|
dev->hw_base = pci_resource_start(pci_dev, 0);
|
|
|
|
dev->base = ioremap(dev->hw_base, 0x1000);
|
|
|
|
reset_chip (dev);
|
|
|
|
write_fs (dev, SARMODE0, 0
|
|
| (0 * SARMODE0_SHADEN) /* We don't use shadow registers. */
|
|
| (1 * SARMODE0_INTMODE_READCLEAR)
|
|
| (1 * SARMODE0_CWRE)
|
|
| (IS_FS50(dev) ? SARMODE0_PRPWT_FS50_5:
|
|
SARMODE0_PRPWT_FS155_3)
|
|
| (1 * SARMODE0_CALSUP_1)
|
|
| (IS_FS50(dev) ? (0
|
|
| SARMODE0_RXVCS_32
|
|
| SARMODE0_ABRVCS_32
|
|
| SARMODE0_TXVCS_32):
|
|
(0
|
|
| SARMODE0_RXVCS_1k
|
|
| SARMODE0_ABRVCS_1k
|
|
| SARMODE0_TXVCS_1k)));
|
|
|
|
/* 10ms * 100 is 1 second. That should be enough, as AN3:9 says it takes
|
|
1ms. */
|
|
to = 100;
|
|
while (--to) {
|
|
isr = read_fs (dev, ISR);
|
|
|
|
/* This bit is documented as "RESERVED" */
|
|
if (isr & ISR_INIT_ERR) {
|
|
printk (KERN_ERR "Error initializing the FS... \n");
|
|
goto unmap;
|
|
}
|
|
if (isr & ISR_INIT) {
|
|
fs_dprintk (FS_DEBUG_INIT, "Ha! Initialized OK!\n");
|
|
break;
|
|
}
|
|
|
|
/* Try again after 10ms. */
|
|
msleep(10);
|
|
}
|
|
|
|
if (!to) {
|
|
printk (KERN_ERR "timeout initializing the FS... \n");
|
|
goto unmap;
|
|
}
|
|
|
|
/* XXX fix for fs155 */
|
|
dev->channel_mask = 0x1f;
|
|
dev->channo = 0;
|
|
|
|
/* AN3: 10 */
|
|
write_fs (dev, SARMODE1, 0
|
|
| (fs_keystream * SARMODE1_DEFHEC) /* XXX PHY */
|
|
| ((loopback == 1) * SARMODE1_TSTLP) /* XXX Loopback mode enable... */
|
|
| (1 * SARMODE1_DCRM)
|
|
| (1 * SARMODE1_DCOAM)
|
|
| (0 * SARMODE1_OAMCRC)
|
|
| (0 * SARMODE1_DUMPE)
|
|
| (0 * SARMODE1_GPLEN)
|
|
| (0 * SARMODE1_GNAM)
|
|
| (0 * SARMODE1_GVAS)
|
|
| (0 * SARMODE1_GPAS)
|
|
| (1 * SARMODE1_GPRI)
|
|
| (0 * SARMODE1_PMS)
|
|
| (0 * SARMODE1_GFCR)
|
|
| (1 * SARMODE1_HECM2)
|
|
| (1 * SARMODE1_HECM1)
|
|
| (1 * SARMODE1_HECM0)
|
|
| (1 << 12) /* That's what hang's driver does. Program to 0 */
|
|
| (0 * 0xff) /* XXX FS155 */);
|
|
|
|
|
|
/* Cal prescale etc */
|
|
|
|
/* AN3: 11 */
|
|
write_fs (dev, TMCONF, 0x0000000f);
|
|
write_fs (dev, CALPRESCALE, 0x01010101 * num);
|
|
write_fs (dev, 0x80, 0x000F00E4);
|
|
|
|
/* AN3: 12 */
|
|
write_fs (dev, CELLOSCONF, 0
|
|
| ( 0 * CELLOSCONF_CEN)
|
|
| ( CELLOSCONF_SC1)
|
|
| (0x80 * CELLOSCONF_COBS)
|
|
| (num * CELLOSCONF_COPK) /* Changed from 0xff to 0x5a */
|
|
| (num * CELLOSCONF_COST));/* after a hint from Hang.
|
|
* performance jumped 50->70... */
|
|
|
|
/* Magic value by Hang */
|
|
write_fs (dev, CELLOSCONF_COST, 0x0B809191);
|
|
|
|
if (IS_FS50 (dev)) {
|
|
write_fs (dev, RAS0, RAS0_DCD_XHLT);
|
|
dev->atm_dev->ci_range.vpi_bits = 12;
|
|
dev->atm_dev->ci_range.vci_bits = 16;
|
|
dev->nchannels = FS50_NR_CHANNELS;
|
|
} else {
|
|
write_fs (dev, RAS0, RAS0_DCD_XHLT
|
|
| (((1 << FS155_VPI_BITS) - 1) * RAS0_VPSEL)
|
|
| (((1 << FS155_VCI_BITS) - 1) * RAS0_VCSEL));
|
|
/* We can chose the split arbitrarily. We might be able to
|
|
support more. Whatever. This should do for now. */
|
|
dev->atm_dev->ci_range.vpi_bits = FS155_VPI_BITS;
|
|
dev->atm_dev->ci_range.vci_bits = FS155_VCI_BITS;
|
|
|
|
/* Address bits we can't use should be compared to 0. */
|
|
write_fs (dev, RAC, 0);
|
|
|
|
/* Manual (AN9, page 6) says ASF1=0 means compare Utopia address
|
|
* too. I can't find ASF1 anywhere. Anyway, we AND with just the
|
|
* other bits, then compare with 0, which is exactly what we
|
|
* want. */
|
|
write_fs (dev, RAM, (1 << (28 - FS155_VPI_BITS - FS155_VCI_BITS)) - 1);
|
|
dev->nchannels = FS155_NR_CHANNELS;
|
|
}
|
|
dev->atm_vccs = kcalloc (dev->nchannels, sizeof (struct atm_vcc *),
|
|
GFP_KERNEL);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Alloc atmvccs: %p(%Zd)\n",
|
|
dev->atm_vccs, dev->nchannels * sizeof (struct atm_vcc *));
|
|
|
|
if (!dev->atm_vccs) {
|
|
printk (KERN_WARNING "Couldn't allocate memory for VCC buffers. Woops!\n");
|
|
/* XXX Clean up..... */
|
|
goto unmap;
|
|
}
|
|
|
|
dev->tx_inuse = kzalloc (dev->nchannels / 8 /* bits/byte */ , GFP_KERNEL);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Alloc tx_inuse: %p(%d)\n",
|
|
dev->atm_vccs, dev->nchannels / 8);
|
|
|
|
if (!dev->tx_inuse) {
|
|
printk (KERN_WARNING "Couldn't allocate memory for tx_inuse bits!\n");
|
|
/* XXX Clean up..... */
|
|
goto unmap;
|
|
}
|
|
/* -- RAS1 : FS155 and 50 differ. Default (0) should be OK for both */
|
|
/* -- RAS2 : FS50 only: Default is OK. */
|
|
|
|
/* DMAMODE, default should be OK. -- REW */
|
|
write_fs (dev, DMAMR, DMAMR_TX_MODE_FULL);
|
|
|
|
init_q (dev, &dev->hp_txq, TX_PQ(TXQ_HP), TXQ_NENTRIES, 0);
|
|
init_q (dev, &dev->lp_txq, TX_PQ(TXQ_LP), TXQ_NENTRIES, 0);
|
|
init_q (dev, &dev->tx_relq, TXB_RQ, TXQ_NENTRIES, 1);
|
|
init_q (dev, &dev->st_q, ST_Q, TXQ_NENTRIES, 1);
|
|
|
|
for (i=0;i < FS_NR_FREE_POOLS;i++) {
|
|
init_fp (dev, &dev->rx_fp[i], RXB_FP(i),
|
|
rx_buf_sizes[i], rx_pool_sizes[i]);
|
|
top_off_fp (dev, &dev->rx_fp[i], GFP_KERNEL);
|
|
}
|
|
|
|
|
|
for (i=0;i < FS_NR_RX_QUEUES;i++)
|
|
init_q (dev, &dev->rx_rq[i], RXB_RQ(i), RXRQ_NENTRIES, 1);
|
|
|
|
dev->irq = pci_dev->irq;
|
|
if (request_irq (dev->irq, fs_irq, IRQF_SHARED, "firestream", dev)) {
|
|
printk (KERN_WARNING "couldn't get irq %d for firestream.\n", pci_dev->irq);
|
|
/* XXX undo all previous stuff... */
|
|
goto unmap;
|
|
}
|
|
fs_dprintk (FS_DEBUG_INIT, "Grabbed irq %d for dev at %p.\n", dev->irq, dev);
|
|
|
|
/* We want to be notified of most things. Just the statistics count
|
|
overflows are not interesting */
|
|
write_fs (dev, IMR, 0
|
|
| ISR_RBRQ0_W
|
|
| ISR_RBRQ1_W
|
|
| ISR_RBRQ2_W
|
|
| ISR_RBRQ3_W
|
|
| ISR_TBRQ_W
|
|
| ISR_CSQ_W);
|
|
|
|
write_fs (dev, SARMODE0, 0
|
|
| (0 * SARMODE0_SHADEN) /* We don't use shadow registers. */
|
|
| (1 * SARMODE0_GINT)
|
|
| (1 * SARMODE0_INTMODE_READCLEAR)
|
|
| (0 * SARMODE0_CWRE)
|
|
| (IS_FS50(dev)?SARMODE0_PRPWT_FS50_5:
|
|
SARMODE0_PRPWT_FS155_3)
|
|
| (1 * SARMODE0_CALSUP_1)
|
|
| (IS_FS50 (dev)?(0
|
|
| SARMODE0_RXVCS_32
|
|
| SARMODE0_ABRVCS_32
|
|
| SARMODE0_TXVCS_32):
|
|
(0
|
|
| SARMODE0_RXVCS_1k
|
|
| SARMODE0_ABRVCS_1k
|
|
| SARMODE0_TXVCS_1k))
|
|
| (1 * SARMODE0_RUN));
|
|
|
|
init_phy (dev, PHY_NTC_INIT);
|
|
|
|
if (loopback == 2) {
|
|
write_phy (dev, 0x39, 0x000e);
|
|
}
|
|
|
|
#ifdef FS_POLL_FREQ
|
|
init_timer (&dev->timer);
|
|
dev->timer.data = (unsigned long) dev;
|
|
dev->timer.function = fs_poll;
|
|
dev->timer.expires = jiffies + FS_POLL_FREQ;
|
|
add_timer (&dev->timer);
|
|
#endif
|
|
|
|
dev->atm_dev->dev_data = dev;
|
|
|
|
func_exit ();
|
|
return 0;
|
|
unmap:
|
|
iounmap(dev->base);
|
|
return 1;
|
|
}
|
|
|
|
static int firestream_init_one(struct pci_dev *pci_dev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct atm_dev *atm_dev;
|
|
struct fs_dev *fs_dev;
|
|
|
|
if (pci_enable_device(pci_dev))
|
|
goto err_out;
|
|
|
|
fs_dev = kzalloc (sizeof (struct fs_dev), GFP_KERNEL);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Alloc fs-dev: %p(%Zd)\n",
|
|
fs_dev, sizeof (struct fs_dev));
|
|
if (!fs_dev)
|
|
goto err_out;
|
|
atm_dev = atm_dev_register("fs", &pci_dev->dev, &ops, -1, NULL);
|
|
if (!atm_dev)
|
|
goto err_out_free_fs_dev;
|
|
|
|
fs_dev->pci_dev = pci_dev;
|
|
fs_dev->atm_dev = atm_dev;
|
|
fs_dev->flags = ent->driver_data;
|
|
|
|
if (fs_init(fs_dev))
|
|
goto err_out_free_atm_dev;
|
|
|
|
fs_dev->next = fs_boards;
|
|
fs_boards = fs_dev;
|
|
return 0;
|
|
|
|
err_out_free_atm_dev:
|
|
atm_dev_deregister(atm_dev);
|
|
err_out_free_fs_dev:
|
|
kfree(fs_dev);
|
|
err_out:
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void firestream_remove_one(struct pci_dev *pdev)
|
|
{
|
|
int i;
|
|
struct fs_dev *dev, *nxtdev;
|
|
struct fs_vcc *vcc;
|
|
struct FS_BPENTRY *fp, *nxt;
|
|
|
|
func_enter ();
|
|
|
|
#if 0
|
|
printk ("hptxq:\n");
|
|
for (i=0;i<60;i++) {
|
|
printk ("%d: %08x %08x %08x %08x \n",
|
|
i, pq[qp].cmd, pq[qp].p0, pq[qp].p1, pq[qp].p2);
|
|
qp++;
|
|
if (qp >= 60) qp = 0;
|
|
}
|
|
|
|
printk ("descriptors:\n");
|
|
for (i=0;i<60;i++) {
|
|
printk ("%d: %p: %08x %08x %p %p\n",
|
|
i, da[qd], dq[qd].flags, dq[qd].bsa, dq[qd].skb, dq[qd].dev);
|
|
qd++;
|
|
if (qd >= 60) qd = 0;
|
|
}
|
|
#endif
|
|
|
|
for (dev = fs_boards;dev != NULL;dev=nxtdev) {
|
|
fs_dprintk (FS_DEBUG_CLEANUP, "Releasing resources for dev at %p.\n", dev);
|
|
|
|
/* XXX Hit all the tx channels too! */
|
|
|
|
for (i=0;i < dev->nchannels;i++) {
|
|
if (dev->atm_vccs[i]) {
|
|
vcc = FS_VCC (dev->atm_vccs[i]);
|
|
submit_command (dev, &dev->hp_txq,
|
|
QE_CMD_TX_PURGE_INH | QE_CMD_IMM_INQ | vcc->channo, 0,0,0);
|
|
submit_command (dev, &dev->hp_txq,
|
|
QE_CMD_RX_PURGE_INH | QE_CMD_IMM_INQ | vcc->channo, 0,0,0);
|
|
|
|
}
|
|
}
|
|
|
|
/* XXX Wait a while for the chip to release all buffers. */
|
|
|
|
for (i=0;i < FS_NR_FREE_POOLS;i++) {
|
|
for (fp=bus_to_virt (read_fs (dev, FP_SA(dev->rx_fp[i].offset)));
|
|
!(fp->flags & FP_FLAGS_EPI);fp = nxt) {
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", fp->skb);
|
|
dev_kfree_skb_any (fp->skb);
|
|
nxt = bus_to_virt (fp->next);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", fp);
|
|
kfree (fp);
|
|
}
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", fp->skb);
|
|
dev_kfree_skb_any (fp->skb);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", fp);
|
|
kfree (fp);
|
|
}
|
|
|
|
/* Hang the chip in "reset", prevent it clobbering memory that is
|
|
no longer ours. */
|
|
reset_chip (dev);
|
|
|
|
fs_dprintk (FS_DEBUG_CLEANUP, "Freeing irq%d.\n", dev->irq);
|
|
free_irq (dev->irq, dev);
|
|
del_timer_sync (&dev->timer);
|
|
|
|
atm_dev_deregister(dev->atm_dev);
|
|
free_queue (dev, &dev->hp_txq);
|
|
free_queue (dev, &dev->lp_txq);
|
|
free_queue (dev, &dev->tx_relq);
|
|
free_queue (dev, &dev->st_q);
|
|
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free atmvccs: %p\n", dev->atm_vccs);
|
|
kfree (dev->atm_vccs);
|
|
|
|
for (i=0;i< FS_NR_FREE_POOLS;i++)
|
|
free_freepool (dev, &dev->rx_fp[i]);
|
|
|
|
for (i=0;i < FS_NR_RX_QUEUES;i++)
|
|
free_queue (dev, &dev->rx_rq[i]);
|
|
|
|
iounmap(dev->base);
|
|
fs_dprintk (FS_DEBUG_ALLOC, "Free fs-dev: %p\n", dev);
|
|
nxtdev = dev->next;
|
|
kfree (dev);
|
|
}
|
|
|
|
func_exit ();
|
|
}
|
|
|
|
static struct pci_device_id firestream_pci_tbl[] = {
|
|
{ PCI_VDEVICE(FUJITSU_ME, PCI_DEVICE_ID_FUJITSU_FS50), FS_IS50},
|
|
{ PCI_VDEVICE(FUJITSU_ME, PCI_DEVICE_ID_FUJITSU_FS155), FS_IS155},
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, firestream_pci_tbl);
|
|
|
|
static struct pci_driver firestream_driver = {
|
|
.name = "firestream",
|
|
.id_table = firestream_pci_tbl,
|
|
.probe = firestream_init_one,
|
|
.remove = firestream_remove_one,
|
|
};
|
|
|
|
static int __init firestream_init_module (void)
|
|
{
|
|
int error;
|
|
|
|
func_enter ();
|
|
error = pci_register_driver(&firestream_driver);
|
|
func_exit ();
|
|
return error;
|
|
}
|
|
|
|
static void __exit firestream_cleanup_module(void)
|
|
{
|
|
pci_unregister_driver(&firestream_driver);
|
|
}
|
|
|
|
module_init(firestream_init_module);
|
|
module_exit(firestream_cleanup_module);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|