mirror of https://gitee.com/openkylin/linux.git
343 lines
13 KiB
Plaintext
343 lines
13 KiB
Plaintext
What: /sys/devices/system/cpu/
|
|
Date: pre-git history
|
|
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
|
|
Description:
|
|
A collection of both global and individual CPU attributes
|
|
|
|
Individual CPU attributes are contained in subdirectories
|
|
named by the kernel's logical CPU number, e.g.:
|
|
|
|
/sys/devices/system/cpu/cpu#/
|
|
|
|
What: /sys/devices/system/cpu/kernel_max
|
|
/sys/devices/system/cpu/offline
|
|
/sys/devices/system/cpu/online
|
|
/sys/devices/system/cpu/possible
|
|
/sys/devices/system/cpu/present
|
|
Date: December 2008
|
|
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
|
|
Description: CPU topology files that describe kernel limits related to
|
|
hotplug. Briefly:
|
|
|
|
kernel_max: the maximum cpu index allowed by the kernel
|
|
configuration.
|
|
|
|
offline: cpus that are not online because they have been
|
|
HOTPLUGGED off or exceed the limit of cpus allowed by the
|
|
kernel configuration (kernel_max above).
|
|
|
|
online: cpus that are online and being scheduled.
|
|
|
|
possible: cpus that have been allocated resources and can be
|
|
brought online if they are present.
|
|
|
|
present: cpus that have been identified as being present in
|
|
the system.
|
|
|
|
See Documentation/cputopology.txt for more information.
|
|
|
|
|
|
What: /sys/devices/system/cpu/probe
|
|
/sys/devices/system/cpu/release
|
|
Date: November 2009
|
|
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
|
|
Description: Dynamic addition and removal of CPU's. This is not hotplug
|
|
removal, this is meant complete removal/addition of the CPU
|
|
from the system.
|
|
|
|
probe: writes to this file will dynamically add a CPU to the
|
|
system. Information written to the file to add CPU's is
|
|
architecture specific.
|
|
|
|
release: writes to this file dynamically remove a CPU from
|
|
the system. Information writtento the file to remove CPU's
|
|
is architecture specific.
|
|
|
|
What: /sys/devices/system/cpu/cpu#/node
|
|
Date: October 2009
|
|
Contact: Linux memory management mailing list <linux-mm@kvack.org>
|
|
Description: Discover NUMA node a CPU belongs to
|
|
|
|
When CONFIG_NUMA is enabled, a symbolic link that points
|
|
to the corresponding NUMA node directory.
|
|
|
|
For example, the following symlink is created for cpu42
|
|
in NUMA node 2:
|
|
|
|
/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
|
|
|
|
|
|
What: /sys/devices/system/cpu/cpu#/topology/core_id
|
|
/sys/devices/system/cpu/cpu#/topology/core_siblings
|
|
/sys/devices/system/cpu/cpu#/topology/core_siblings_list
|
|
/sys/devices/system/cpu/cpu#/topology/physical_package_id
|
|
/sys/devices/system/cpu/cpu#/topology/thread_siblings
|
|
/sys/devices/system/cpu/cpu#/topology/thread_siblings_list
|
|
Date: December 2008
|
|
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
|
|
Description: CPU topology files that describe a logical CPU's relationship
|
|
to other cores and threads in the same physical package.
|
|
|
|
One cpu# directory is created per logical CPU in the system,
|
|
e.g. /sys/devices/system/cpu/cpu42/.
|
|
|
|
Briefly, the files above are:
|
|
|
|
core_id: the CPU core ID of cpu#. Typically it is the
|
|
hardware platform's identifier (rather than the kernel's).
|
|
The actual value is architecture and platform dependent.
|
|
|
|
core_siblings: internal kernel map of cpu#'s hardware threads
|
|
within the same physical_package_id.
|
|
|
|
core_siblings_list: human-readable list of the logical CPU
|
|
numbers within the same physical_package_id as cpu#.
|
|
|
|
physical_package_id: physical package id of cpu#. Typically
|
|
corresponds to a physical socket number, but the actual value
|
|
is architecture and platform dependent.
|
|
|
|
thread_siblings: internel kernel map of cpu#'s hardware
|
|
threads within the same core as cpu#
|
|
|
|
thread_siblings_list: human-readable list of cpu#'s hardware
|
|
threads within the same core as cpu#
|
|
|
|
See Documentation/cputopology.txt for more information.
|
|
|
|
|
|
What: /sys/devices/system/cpu/cpuidle/current_driver
|
|
/sys/devices/system/cpu/cpuidle/current_governer_ro
|
|
Date: September 2007
|
|
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
|
|
Description: Discover cpuidle policy and mechanism
|
|
|
|
Various CPUs today support multiple idle levels that are
|
|
differentiated by varying exit latencies and power
|
|
consumption during idle.
|
|
|
|
Idle policy (governor) is differentiated from idle mechanism
|
|
(driver)
|
|
|
|
current_driver: displays current idle mechanism
|
|
|
|
current_governor_ro: displays current idle policy
|
|
|
|
See files in Documentation/cpuidle/ for more information.
|
|
|
|
|
|
What: /sys/devices/system/cpu/cpu#/cpufreq/*
|
|
Date: pre-git history
|
|
Contact: linux-pm@vger.kernel.org
|
|
Description: Discover and change clock speed of CPUs
|
|
|
|
Clock scaling allows you to change the clock speed of the
|
|
CPUs on the fly. This is a nice method to save battery
|
|
power, because the lower the clock speed, the less power
|
|
the CPU consumes.
|
|
|
|
There are many knobs to tweak in this directory.
|
|
|
|
See files in Documentation/cpu-freq/ for more information.
|
|
|
|
In particular, read Documentation/cpu-freq/user-guide.txt
|
|
to learn how to control the knobs.
|
|
|
|
|
|
What: /sys/devices/system/cpu/cpu#/cpufreq/freqdomain_cpus
|
|
Date: June 2013
|
|
Contact: linux-pm@vger.kernel.org
|
|
Description: Discover CPUs in the same CPU frequency coordination domain
|
|
|
|
freqdomain_cpus is the list of CPUs (online+offline) that share
|
|
the same clock/freq domain (possibly at the hardware level).
|
|
That information may be hidden from the cpufreq core and the
|
|
value of related_cpus may be different from freqdomain_cpus. This
|
|
attribute is useful for user space DVFS controllers to get better
|
|
power/performance results for platforms using acpi-cpufreq.
|
|
|
|
This file is only present if the acpi-cpufreq driver is in use.
|
|
|
|
|
|
What: /sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}
|
|
Date: August 2008
|
|
KernelVersion: 2.6.27
|
|
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
|
|
Description: Disable L3 cache indices
|
|
|
|
These files exist in every CPU's cache/index3 directory. Each
|
|
cache_disable_{0,1} file corresponds to one disable slot which
|
|
can be used to disable a cache index. Reading from these files
|
|
on a processor with this functionality will return the currently
|
|
disabled index for that node. There is one L3 structure per
|
|
node, or per internal node on MCM machines. Writing a valid
|
|
index to one of these files will cause the specificed cache
|
|
index to be disabled.
|
|
|
|
All AMD processors with L3 caches provide this functionality.
|
|
For details, see BKDGs at
|
|
http://developer.amd.com/documentation/guides/Pages/default.aspx
|
|
|
|
|
|
What: /sys/devices/system/cpu/cpufreq/boost
|
|
Date: August 2012
|
|
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
|
|
Description: Processor frequency boosting control
|
|
|
|
This switch controls the boost setting for the whole system.
|
|
Boosting allows the CPU and the firmware to run at a frequency
|
|
beyound it's nominal limit.
|
|
More details can be found in Documentation/cpu-freq/boost.txt
|
|
|
|
|
|
What: /sys/devices/system/cpu/cpu#/crash_notes
|
|
/sys/devices/system/cpu/cpu#/crash_notes_size
|
|
Date: April 2013
|
|
Contact: kexec@lists.infradead.org
|
|
Description: address and size of the percpu note.
|
|
|
|
crash_notes: the physical address of the memory that holds the
|
|
note of cpu#.
|
|
|
|
crash_notes_size: size of the note of cpu#.
|
|
|
|
|
|
What: /sys/devices/system/cpu/intel_pstate/max_perf_pct
|
|
/sys/devices/system/cpu/intel_pstate/min_perf_pct
|
|
/sys/devices/system/cpu/intel_pstate/no_turbo
|
|
Date: February 2013
|
|
Contact: linux-pm@vger.kernel.org
|
|
Description: Parameters for the Intel P-state driver
|
|
|
|
Logic for selecting the current P-state in Intel
|
|
Sandybridge+ processors. The three knobs control
|
|
limits for the P-state that will be requested by the
|
|
driver.
|
|
|
|
max_perf_pct: limits the maximum P state that will be requested by
|
|
the driver stated as a percentage of the available performance.
|
|
|
|
min_perf_pct: limits the minimum P state that will be requested by
|
|
the driver stated as a percentage of the available performance.
|
|
|
|
no_turbo: limits the driver to selecting P states below the turbo
|
|
frequency range.
|
|
|
|
More details can be found in Documentation/cpu-freq/intel-pstate.txt
|
|
|
|
What: /sys/devices/system/cpu/cpu*/cache/index*/<set_of_attributes_mentioned_below>
|
|
Date: July 2014(documented, existed before August 2008)
|
|
Contact: Sudeep Holla <sudeep.holla@arm.com>
|
|
Linux kernel mailing list <linux-kernel@vger.kernel.org>
|
|
Description: Parameters for the CPU cache attributes
|
|
|
|
allocation_policy:
|
|
- WriteAllocate: allocate a memory location to a cache line
|
|
on a cache miss because of a write
|
|
- ReadAllocate: allocate a memory location to a cache line
|
|
on a cache miss because of a read
|
|
- ReadWriteAllocate: both writeallocate and readallocate
|
|
|
|
attributes: LEGACY used only on IA64 and is same as write_policy
|
|
|
|
coherency_line_size: the minimum amount of data in bytes that gets
|
|
transferred from memory to cache
|
|
|
|
level: the cache hierarchy in the multi-level cache configuration
|
|
|
|
number_of_sets: total number of sets in the cache, a set is a
|
|
collection of cache lines with the same cache index
|
|
|
|
physical_line_partition: number of physical cache line per cache tag
|
|
|
|
shared_cpu_list: the list of logical cpus sharing the cache
|
|
|
|
shared_cpu_map: logical cpu mask containing the list of cpus sharing
|
|
the cache
|
|
|
|
size: the total cache size in kB
|
|
|
|
type:
|
|
- Instruction: cache that only holds instructions
|
|
- Data: cache that only caches data
|
|
- Unified: cache that holds both data and instructions
|
|
|
|
ways_of_associativity: degree of freedom in placing a particular block
|
|
of memory in the cache
|
|
|
|
write_policy:
|
|
- WriteThrough: data is written to both the cache line
|
|
and to the block in the lower-level memory
|
|
- WriteBack: data is written only to the cache line and
|
|
the modified cache line is written to main
|
|
memory only when it is replaced
|
|
|
|
What: /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats
|
|
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/turbo_stat
|
|
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/sub_turbo_stat
|
|
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/unthrottle
|
|
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/powercap
|
|
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overtemp
|
|
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/supply_fault
|
|
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overcurrent
|
|
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/occ_reset
|
|
Date: March 2016
|
|
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
|
|
Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
|
|
Description: POWERNV CPUFreq driver's frequency throttle stats directory and
|
|
attributes
|
|
|
|
'cpuX/cpufreq/throttle_stats' directory contains the CPU frequency
|
|
throttle stat attributes for the chip. The throttle stats of a cpu
|
|
is common across all the cpus belonging to a chip. Below are the
|
|
throttle attributes exported in the 'throttle_stats' directory:
|
|
|
|
- turbo_stat : This file gives the total number of times the max
|
|
frequency is throttled to lower frequency in turbo (at and above
|
|
nominal frequency) range of frequencies.
|
|
|
|
- sub_turbo_stat : This file gives the total number of times the
|
|
max frequency is throttled to lower frequency in sub-turbo(below
|
|
nominal frequency) range of frequencies.
|
|
|
|
- unthrottle : This file gives the total number of times the max
|
|
frequency is unthrottled after being throttled.
|
|
|
|
- powercap : This file gives the total number of times the max
|
|
frequency is throttled due to 'Power Capping'.
|
|
|
|
- overtemp : This file gives the total number of times the max
|
|
frequency is throttled due to 'CPU Over Temperature'.
|
|
|
|
- supply_fault : This file gives the total number of times the
|
|
max frequency is throttled due to 'Power Supply Failure'.
|
|
|
|
- overcurrent : This file gives the total number of times the
|
|
max frequency is throttled due to 'Overcurrent'.
|
|
|
|
- occ_reset : This file gives the total number of times the max
|
|
frequency is throttled due to 'OCC Reset'.
|
|
|
|
The sysfs attributes representing different throttle reasons like
|
|
powercap, overtemp, supply_fault, overcurrent and occ_reset map to
|
|
the reasons provided by OCC firmware for throttling the frequency.
|
|
|
|
What: /sys/devices/system/cpu/cpufreq/policyX/throttle_stats
|
|
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/turbo_stat
|
|
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/sub_turbo_stat
|
|
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/unthrottle
|
|
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/powercap
|
|
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/overtemp
|
|
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/supply_fault
|
|
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/overcurrent
|
|
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/occ_reset
|
|
Date: March 2016
|
|
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
|
|
Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
|
|
Description: POWERNV CPUFreq driver's frequency throttle stats directory and
|
|
attributes
|
|
|
|
'policyX/throttle_stats' directory and all the attributes are same as
|
|
the /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats directory and
|
|
attributes which give the frequency throttle information of the chip.
|