mirror of https://gitee.com/openkylin/linux.git
352 lines
8.5 KiB
C
352 lines
8.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Driver for ICPlus PHYs
|
|
*
|
|
* Copyright (c) 2007 Freescale Semiconductor, Inc.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/property.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers");
|
|
MODULE_AUTHOR("Michael Barkowski");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* IP101A/G - IP1001 */
|
|
#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */
|
|
#define IP1001_RXPHASE_SEL BIT(0) /* Add delay on RX_CLK */
|
|
#define IP1001_TXPHASE_SEL BIT(1) /* Add delay on TX_CLK */
|
|
#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
|
|
#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
|
|
#define IP101A_G_APS_ON BIT(1) /* IP101A/G APS Mode bit */
|
|
#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */
|
|
#define IP101A_G_IRQ_PIN_USED BIT(15) /* INTR pin used */
|
|
#define IP101A_G_IRQ_ALL_MASK BIT(11) /* IRQ's inactive */
|
|
#define IP101A_G_IRQ_SPEED_CHANGE BIT(2)
|
|
#define IP101A_G_IRQ_DUPLEX_CHANGE BIT(1)
|
|
#define IP101A_G_IRQ_LINK_CHANGE BIT(0)
|
|
|
|
#define IP101G_DIGITAL_IO_SPEC_CTRL 0x1d
|
|
#define IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32 BIT(2)
|
|
|
|
/* The 32-pin IP101GR package can re-configure the mode of the RXER/INTR_32 pin
|
|
* (pin number 21). The hardware default is RXER (receive error) mode. But it
|
|
* can be configured to interrupt mode manually.
|
|
*/
|
|
enum ip101gr_sel_intr32 {
|
|
IP101GR_SEL_INTR32_KEEP,
|
|
IP101GR_SEL_INTR32_INTR,
|
|
IP101GR_SEL_INTR32_RXER,
|
|
};
|
|
|
|
struct ip101a_g_phy_priv {
|
|
enum ip101gr_sel_intr32 sel_intr32;
|
|
};
|
|
|
|
static int ip175c_config_init(struct phy_device *phydev)
|
|
{
|
|
int err, i;
|
|
static int full_reset_performed;
|
|
|
|
if (full_reset_performed == 0) {
|
|
|
|
/* master reset */
|
|
err = mdiobus_write(phydev->mdio.bus, 30, 0, 0x175c);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* ensure no bus delays overlap reset period */
|
|
err = mdiobus_read(phydev->mdio.bus, 30, 0);
|
|
|
|
/* data sheet specifies reset period is 2 msec */
|
|
mdelay(2);
|
|
|
|
/* enable IP175C mode */
|
|
err = mdiobus_write(phydev->mdio.bus, 29, 31, 0x175c);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Set MII0 speed and duplex (in PHY mode) */
|
|
err = mdiobus_write(phydev->mdio.bus, 29, 22, 0x420);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* reset switch ports */
|
|
for (i = 0; i < 5; i++) {
|
|
err = mdiobus_write(phydev->mdio.bus, i,
|
|
MII_BMCR, BMCR_RESET);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
for (i = 0; i < 5; i++)
|
|
err = mdiobus_read(phydev->mdio.bus, i, MII_BMCR);
|
|
|
|
mdelay(2);
|
|
|
|
full_reset_performed = 1;
|
|
}
|
|
|
|
if (phydev->mdio.addr != 4) {
|
|
phydev->state = PHY_RUNNING;
|
|
phydev->speed = SPEED_100;
|
|
phydev->duplex = DUPLEX_FULL;
|
|
phydev->link = 1;
|
|
netif_carrier_on(phydev->attached_dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ip1xx_reset(struct phy_device *phydev)
|
|
{
|
|
int bmcr;
|
|
|
|
/* Software Reset PHY */
|
|
bmcr = phy_read(phydev, MII_BMCR);
|
|
if (bmcr < 0)
|
|
return bmcr;
|
|
bmcr |= BMCR_RESET;
|
|
bmcr = phy_write(phydev, MII_BMCR, bmcr);
|
|
if (bmcr < 0)
|
|
return bmcr;
|
|
|
|
do {
|
|
bmcr = phy_read(phydev, MII_BMCR);
|
|
if (bmcr < 0)
|
|
return bmcr;
|
|
} while (bmcr & BMCR_RESET);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ip1001_config_init(struct phy_device *phydev)
|
|
{
|
|
int c;
|
|
|
|
c = ip1xx_reset(phydev);
|
|
if (c < 0)
|
|
return c;
|
|
|
|
/* Enable Auto Power Saving mode */
|
|
c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2);
|
|
if (c < 0)
|
|
return c;
|
|
c |= IP1001_APS_ON;
|
|
c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c);
|
|
if (c < 0)
|
|
return c;
|
|
|
|
if (phy_interface_is_rgmii(phydev)) {
|
|
|
|
c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
|
|
if (c < 0)
|
|
return c;
|
|
|
|
c &= ~(IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL);
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
|
|
c |= (IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL);
|
|
else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
|
|
c |= IP1001_RXPHASE_SEL;
|
|
else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
|
|
c |= IP1001_TXPHASE_SEL;
|
|
|
|
c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
|
|
if (c < 0)
|
|
return c;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ip175c_read_status(struct phy_device *phydev)
|
|
{
|
|
if (phydev->mdio.addr == 4) /* WAN port */
|
|
genphy_read_status(phydev);
|
|
else
|
|
/* Don't need to read status for switch ports */
|
|
phydev->irq = PHY_IGNORE_INTERRUPT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ip175c_config_aneg(struct phy_device *phydev)
|
|
{
|
|
if (phydev->mdio.addr == 4) /* WAN port */
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ip101a_g_probe(struct phy_device *phydev)
|
|
{
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct ip101a_g_phy_priv *priv;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
/* Both functions (RX error and interrupt status) are sharing the same
|
|
* pin on the 32-pin IP101GR, so this is an exclusive choice.
|
|
*/
|
|
if (device_property_read_bool(dev, "icplus,select-rx-error") &&
|
|
device_property_read_bool(dev, "icplus,select-interrupt")) {
|
|
dev_err(dev,
|
|
"RXER and INTR mode cannot be selected together\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (device_property_read_bool(dev, "icplus,select-rx-error"))
|
|
priv->sel_intr32 = IP101GR_SEL_INTR32_RXER;
|
|
else if (device_property_read_bool(dev, "icplus,select-interrupt"))
|
|
priv->sel_intr32 = IP101GR_SEL_INTR32_INTR;
|
|
else
|
|
priv->sel_intr32 = IP101GR_SEL_INTR32_KEEP;
|
|
|
|
phydev->priv = priv;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ip101a_g_config_init(struct phy_device *phydev)
|
|
{
|
|
struct ip101a_g_phy_priv *priv = phydev->priv;
|
|
int err, c;
|
|
|
|
c = ip1xx_reset(phydev);
|
|
if (c < 0)
|
|
return c;
|
|
|
|
/* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */
|
|
switch (priv->sel_intr32) {
|
|
case IP101GR_SEL_INTR32_RXER:
|
|
err = phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL,
|
|
IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, 0);
|
|
if (err < 0)
|
|
return err;
|
|
break;
|
|
|
|
case IP101GR_SEL_INTR32_INTR:
|
|
err = phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL,
|
|
IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32,
|
|
IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32);
|
|
if (err < 0)
|
|
return err;
|
|
break;
|
|
|
|
default:
|
|
/* Don't touch IP101G_DIGITAL_IO_SPEC_CTRL because it's not
|
|
* documented on IP101A and it's not clear whether this would
|
|
* cause problems.
|
|
* For the 32-pin IP101GR we simply keep the SEL_INTR32
|
|
* configuration as set by the bootloader when not configured
|
|
* to one of the special functions.
|
|
*/
|
|
break;
|
|
}
|
|
|
|
/* Enable Auto Power Saving mode */
|
|
c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
|
|
c |= IP101A_G_APS_ON;
|
|
|
|
return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
|
|
}
|
|
|
|
static int ip101a_g_config_intr(struct phy_device *phydev)
|
|
{
|
|
u16 val;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
/* INTR pin used: Speed/link/duplex will cause an interrupt */
|
|
val = IP101A_G_IRQ_PIN_USED;
|
|
else
|
|
val = IP101A_G_IRQ_ALL_MASK;
|
|
|
|
return phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, val);
|
|
}
|
|
|
|
static int ip101a_g_did_interrupt(struct phy_device *phydev)
|
|
{
|
|
int val = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS);
|
|
|
|
if (val < 0)
|
|
return 0;
|
|
|
|
return val & (IP101A_G_IRQ_SPEED_CHANGE |
|
|
IP101A_G_IRQ_DUPLEX_CHANGE |
|
|
IP101A_G_IRQ_LINK_CHANGE);
|
|
}
|
|
|
|
static int ip101a_g_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver icplus_driver[] = {
|
|
{
|
|
.phy_id = 0x02430d80,
|
|
.name = "ICPlus IP175C",
|
|
.phy_id_mask = 0x0ffffff0,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.config_init = &ip175c_config_init,
|
|
.config_aneg = &ip175c_config_aneg,
|
|
.read_status = &ip175c_read_status,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = 0x02430d90,
|
|
.name = "ICPlus IP1001",
|
|
.phy_id_mask = 0x0ffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config_init = &ip1001_config_init,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = 0x02430c54,
|
|
.name = "ICPlus IP101A/G",
|
|
.phy_id_mask = 0x0ffffff0,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.probe = ip101a_g_probe,
|
|
.config_intr = ip101a_g_config_intr,
|
|
.did_interrupt = ip101a_g_did_interrupt,
|
|
.ack_interrupt = ip101a_g_ack_interrupt,
|
|
.config_init = &ip101a_g_config_init,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
} };
|
|
|
|
module_phy_driver(icplus_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused icplus_tbl[] = {
|
|
{ 0x02430d80, 0x0ffffff0 },
|
|
{ 0x02430d90, 0x0ffffff0 },
|
|
{ 0x02430c54, 0x0ffffff0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, icplus_tbl);
|