mirror of https://gitee.com/openkylin/linux.git
138 lines
4.4 KiB
Plaintext
138 lines
4.4 KiB
Plaintext
======================================================================
|
|
Device tree bindings for the Aspeed Low Pin Count (LPC) Bus Controller
|
|
======================================================================
|
|
|
|
The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
|
|
peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
|
|
primary use case of the Aspeed LPC controller is as a slave on the bus
|
|
(typically in a Baseboard Management Controller SoC), but under certain
|
|
conditions it can also take the role of bus master.
|
|
|
|
The LPC controller is represented as a multi-function device to account for the
|
|
mix of functionality it provides. The principle split is between the register
|
|
layout at the start of the I/O space which is, to quote the Aspeed datasheet,
|
|
"basically compatible with the [LPC registers from the] popular BMC controller
|
|
H8S/2168[1]", and everything else, where everything else is an eclectic
|
|
collection of functions with a esoteric register layout. "Everything else",
|
|
here labeled the "host" portion of the controller, includes, but is not limited
|
|
to:
|
|
|
|
* An IPMI Block Transfer[2] Controller
|
|
|
|
* An LPC Host Controller: Manages LPC functions such as host vs slave mode, the
|
|
physical properties of some LPC pins, configuration of serial IRQs, and
|
|
APB-to-LPC bridging amonst other functions.
|
|
|
|
* An LPC Host Interface Controller: Manages functions exposed to the host such
|
|
as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
|
|
management and bus snoop configuration.
|
|
|
|
* A set of SuperIO[3] scratch registers: Enables implementation of e.g. custom
|
|
hardware management protocols for handover between the host and baseboard
|
|
management controller.
|
|
|
|
Additionally the state of the LPC controller influences the pinmux
|
|
configuration, therefore the host portion of the controller is exposed as a
|
|
syscon as a means to arbitrate access.
|
|
|
|
[0] http://www.intel.com/design/chipsets/industry/25128901.pdf
|
|
[1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4
|
|
[2] http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf
|
|
[3] https://en.wikipedia.org/wiki/Super_I/O
|
|
|
|
Required properties
|
|
===================
|
|
|
|
- compatible: One of:
|
|
"aspeed,ast2400-lpc", "simple-mfd"
|
|
"aspeed,ast2500-lpc", "simple-mfd"
|
|
|
|
- reg: contains the physical address and length values of the Aspeed
|
|
LPC memory region.
|
|
|
|
- #address-cells: <1>
|
|
- #size-cells: <1>
|
|
- ranges: Maps 0 to the physical address and length of the LPC memory
|
|
region
|
|
|
|
Required LPC Child nodes
|
|
========================
|
|
|
|
BMC Node
|
|
--------
|
|
|
|
- compatible: One of:
|
|
"aspeed,ast2400-lpc-bmc"
|
|
"aspeed,ast2500-lpc-bmc"
|
|
|
|
- reg: contains the physical address and length values of the
|
|
H8S/2168-compatible LPC controller memory region
|
|
|
|
Host Node
|
|
---------
|
|
|
|
- compatible: One of:
|
|
"aspeed,ast2400-lpc-host", "simple-mfd", "syscon"
|
|
"aspeed,ast2500-lpc-host", "simple-mfd", "syscon"
|
|
|
|
- reg: contains the address and length values of the host-related
|
|
register space for the Aspeed LPC controller
|
|
|
|
- #address-cells: <1>
|
|
- #size-cells: <1>
|
|
- ranges: Maps 0 to the address and length of the host-related LPC memory
|
|
region
|
|
|
|
Example:
|
|
|
|
lpc: lpc@1e789000 {
|
|
compatible = "aspeed,ast2500-lpc", "simple-mfd";
|
|
reg = <0x1e789000 0x1000>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x1e789000 0x1000>;
|
|
|
|
lpc_bmc: lpc-bmc@0 {
|
|
compatible = "aspeed,ast2500-lpc-bmc";
|
|
reg = <0x0 0x80>;
|
|
};
|
|
|
|
lpc_host: lpc-host@80 {
|
|
compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
|
|
reg = <0x80 0x1e0>;
|
|
reg-io-width = <4>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x80 0x1e0>;
|
|
};
|
|
};
|
|
|
|
Host Node Children
|
|
==================
|
|
|
|
LPC Host Controller
|
|
-------------------
|
|
|
|
The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour
|
|
between the host and the baseboard management controller. The registers exist
|
|
in the "host" portion of the Aspeed LPC controller, which must be the parent of
|
|
the LPC host controller node.
|
|
|
|
Required properties:
|
|
|
|
- compatible: One of:
|
|
"aspeed,ast2400-lhc";
|
|
"aspeed,ast2500-lhc";
|
|
|
|
- reg: contains offset/length values of the LHC memory regions. In the
|
|
AST2400 and AST2500 there are two regions.
|
|
|
|
Example:
|
|
|
|
lhc: lhc@20 {
|
|
compatible = "aspeed,ast2500-lhc";
|
|
reg = <0x20 0x24 0x48 0x8>;
|
|
};
|