mirror of https://gitee.com/openkylin/linux.git
466 lines
11 KiB
C
466 lines
11 KiB
C
/*
|
|
* (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved.
|
|
*
|
|
* Parts of this file were based on sources as follows:
|
|
*
|
|
* Copyright (c) 2006-2008 Intel Corporation
|
|
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
|
|
* Copyright (C) 2011 Texas Instruments
|
|
*
|
|
* This program is free software and is provided to you under the terms of the
|
|
* GNU General Public License version 2 as published by the Free Software
|
|
* Foundation, and any use by you of this program is subject to the terms of
|
|
* such GNU licence.
|
|
*
|
|
*/
|
|
|
|
#include <linux/amba/clcd-regs.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/version.h>
|
|
#include <linux/dma-buf.h>
|
|
#include <linux/of_graph.h>
|
|
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_panel.h>
|
|
#include <drm/drm_gem_cma_helper.h>
|
|
#include <drm/drm_fb_cma_helper.h>
|
|
|
|
#include "pl111_drm.h"
|
|
|
|
irqreturn_t pl111_irq(int irq, void *data)
|
|
{
|
|
struct pl111_drm_dev_private *priv = data;
|
|
u32 irq_stat;
|
|
irqreturn_t status = IRQ_NONE;
|
|
|
|
irq_stat = readl(priv->regs + CLCD_PL111_MIS);
|
|
|
|
if (!irq_stat)
|
|
return IRQ_NONE;
|
|
|
|
if (irq_stat & CLCD_IRQ_NEXTBASE_UPDATE) {
|
|
drm_crtc_handle_vblank(&priv->pipe.crtc);
|
|
|
|
status = IRQ_HANDLED;
|
|
}
|
|
|
|
/* Clear the interrupt once done */
|
|
writel(irq_stat, priv->regs + CLCD_PL111_ICR);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int pl111_display_check(struct drm_simple_display_pipe *pipe,
|
|
struct drm_plane_state *pstate,
|
|
struct drm_crtc_state *cstate)
|
|
{
|
|
const struct drm_display_mode *mode = &cstate->mode;
|
|
struct drm_framebuffer *old_fb = pipe->plane.state->fb;
|
|
struct drm_framebuffer *fb = pstate->fb;
|
|
|
|
if (mode->hdisplay % 16)
|
|
return -EINVAL;
|
|
|
|
if (fb) {
|
|
u32 offset = drm_fb_cma_get_gem_addr(fb, pstate, 0);
|
|
|
|
/* FB base address must be dword aligned. */
|
|
if (offset & 3)
|
|
return -EINVAL;
|
|
|
|
/* There's no pitch register -- the mode's hdisplay
|
|
* controls it.
|
|
*/
|
|
if (fb->pitches[0] != mode->hdisplay * fb->format->cpp[0])
|
|
return -EINVAL;
|
|
|
|
/* We can't change the FB format in a flicker-free
|
|
* manner (and only update it during CRTC enable).
|
|
*/
|
|
if (old_fb && old_fb->format != fb->format)
|
|
cstate->mode_changed = true;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
|
|
struct drm_crtc_state *cstate)
|
|
{
|
|
struct drm_crtc *crtc = &pipe->crtc;
|
|
struct drm_plane *plane = &pipe->plane;
|
|
struct drm_device *drm = crtc->dev;
|
|
struct pl111_drm_dev_private *priv = drm->dev_private;
|
|
const struct drm_display_mode *mode = &cstate->mode;
|
|
struct drm_framebuffer *fb = plane->state->fb;
|
|
struct drm_connector *connector = &priv->connector.connector;
|
|
u32 cntl;
|
|
u32 ppl, hsw, hfp, hbp;
|
|
u32 lpp, vsw, vfp, vbp;
|
|
u32 cpl, tim2;
|
|
int ret;
|
|
|
|
ret = clk_set_rate(priv->clk, mode->clock * 1000);
|
|
if (ret) {
|
|
dev_err(drm->dev,
|
|
"Failed to set pixel clock rate to %d: %d\n",
|
|
mode->clock * 1000, ret);
|
|
}
|
|
|
|
clk_prepare_enable(priv->clk);
|
|
|
|
ppl = (mode->hdisplay / 16) - 1;
|
|
hsw = mode->hsync_end - mode->hsync_start - 1;
|
|
hfp = mode->hsync_start - mode->hdisplay - 1;
|
|
hbp = mode->htotal - mode->hsync_end - 1;
|
|
|
|
lpp = mode->vdisplay - 1;
|
|
vsw = mode->vsync_end - mode->vsync_start - 1;
|
|
vfp = mode->vsync_start - mode->vdisplay;
|
|
vbp = mode->vtotal - mode->vsync_end;
|
|
|
|
cpl = mode->hdisplay - 1;
|
|
|
|
writel((ppl << 2) |
|
|
(hsw << 8) |
|
|
(hfp << 16) |
|
|
(hbp << 24),
|
|
priv->regs + CLCD_TIM0);
|
|
writel(lpp |
|
|
(vsw << 10) |
|
|
(vfp << 16) |
|
|
(vbp << 24),
|
|
priv->regs + CLCD_TIM1);
|
|
|
|
spin_lock(&priv->tim2_lock);
|
|
|
|
tim2 = readl(priv->regs + CLCD_TIM2);
|
|
tim2 &= (TIM2_BCD | TIM2_PCD_LO_MASK | TIM2_PCD_HI_MASK);
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
|
|
tim2 |= TIM2_IHS;
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
|
|
tim2 |= TIM2_IVS;
|
|
|
|
if (connector->display_info.bus_flags & DRM_BUS_FLAG_DE_LOW)
|
|
tim2 |= TIM2_IOE;
|
|
|
|
if (connector->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
|
|
tim2 |= TIM2_IPC;
|
|
|
|
tim2 |= cpl << 16;
|
|
writel(tim2, priv->regs + CLCD_TIM2);
|
|
spin_unlock(&priv->tim2_lock);
|
|
|
|
writel(0, priv->regs + CLCD_TIM3);
|
|
|
|
drm_panel_prepare(priv->connector.panel);
|
|
|
|
/* Enable and Power Up */
|
|
cntl = CNTL_LCDEN | CNTL_LCDTFT | CNTL_LCDPWR | CNTL_LCDVCOMP(1);
|
|
|
|
/* Note that the the hardware's format reader takes 'r' from
|
|
* the low bit, while DRM formats list channels from high bit
|
|
* to low bit as you read left to right.
|
|
*/
|
|
switch (fb->format->format) {
|
|
case DRM_FORMAT_ABGR8888:
|
|
case DRM_FORMAT_XBGR8888:
|
|
cntl |= CNTL_LCDBPP24;
|
|
break;
|
|
case DRM_FORMAT_ARGB8888:
|
|
case DRM_FORMAT_XRGB8888:
|
|
cntl |= CNTL_LCDBPP24 | CNTL_BGR;
|
|
break;
|
|
case DRM_FORMAT_BGR565:
|
|
cntl |= CNTL_LCDBPP16_565;
|
|
break;
|
|
case DRM_FORMAT_RGB565:
|
|
cntl |= CNTL_LCDBPP16_565 | CNTL_BGR;
|
|
break;
|
|
case DRM_FORMAT_ABGR1555:
|
|
case DRM_FORMAT_XBGR1555:
|
|
cntl |= CNTL_LCDBPP16;
|
|
break;
|
|
case DRM_FORMAT_ARGB1555:
|
|
case DRM_FORMAT_XRGB1555:
|
|
cntl |= CNTL_LCDBPP16 | CNTL_BGR;
|
|
break;
|
|
case DRM_FORMAT_ABGR4444:
|
|
case DRM_FORMAT_XBGR4444:
|
|
cntl |= CNTL_LCDBPP16_444;
|
|
break;
|
|
case DRM_FORMAT_ARGB4444:
|
|
case DRM_FORMAT_XRGB4444:
|
|
cntl |= CNTL_LCDBPP16_444 | CNTL_BGR;
|
|
break;
|
|
default:
|
|
WARN_ONCE(true, "Unknown FB format 0x%08x\n",
|
|
fb->format->format);
|
|
break;
|
|
}
|
|
|
|
writel(cntl, priv->regs + CLCD_PL111_CNTL);
|
|
|
|
drm_panel_enable(priv->connector.panel);
|
|
|
|
drm_crtc_vblank_on(crtc);
|
|
}
|
|
|
|
void pl111_display_disable(struct drm_simple_display_pipe *pipe)
|
|
{
|
|
struct drm_crtc *crtc = &pipe->crtc;
|
|
struct drm_device *drm = crtc->dev;
|
|
struct pl111_drm_dev_private *priv = drm->dev_private;
|
|
|
|
drm_crtc_vblank_off(crtc);
|
|
|
|
drm_panel_disable(priv->connector.panel);
|
|
|
|
/* Disable and Power Down */
|
|
writel(0, priv->regs + CLCD_PL111_CNTL);
|
|
|
|
drm_panel_unprepare(priv->connector.panel);
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
}
|
|
|
|
static void pl111_display_update(struct drm_simple_display_pipe *pipe,
|
|
struct drm_plane_state *old_pstate)
|
|
{
|
|
struct drm_crtc *crtc = &pipe->crtc;
|
|
struct drm_device *drm = crtc->dev;
|
|
struct pl111_drm_dev_private *priv = drm->dev_private;
|
|
struct drm_pending_vblank_event *event = crtc->state->event;
|
|
struct drm_plane *plane = &pipe->plane;
|
|
struct drm_plane_state *pstate = plane->state;
|
|
struct drm_framebuffer *fb = pstate->fb;
|
|
|
|
if (fb) {
|
|
u32 addr = drm_fb_cma_get_gem_addr(fb, pstate, 0);
|
|
|
|
writel(addr, priv->regs + CLCD_UBAS);
|
|
}
|
|
|
|
if (event) {
|
|
crtc->state->event = NULL;
|
|
|
|
spin_lock_irq(&crtc->dev->event_lock);
|
|
if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0)
|
|
drm_crtc_arm_vblank_event(crtc, event);
|
|
else
|
|
drm_crtc_send_vblank_event(crtc, event);
|
|
spin_unlock_irq(&crtc->dev->event_lock);
|
|
}
|
|
}
|
|
|
|
int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc)
|
|
{
|
|
struct pl111_drm_dev_private *priv = drm->dev_private;
|
|
|
|
writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + CLCD_PL111_IENB);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc)
|
|
{
|
|
struct pl111_drm_dev_private *priv = drm->dev_private;
|
|
|
|
writel(0, priv->regs + CLCD_PL111_IENB);
|
|
}
|
|
|
|
static int pl111_display_prepare_fb(struct drm_simple_display_pipe *pipe,
|
|
struct drm_plane_state *plane_state)
|
|
{
|
|
return drm_fb_cma_prepare_fb(&pipe->plane, plane_state);
|
|
}
|
|
|
|
static const struct drm_simple_display_pipe_funcs pl111_display_funcs = {
|
|
.check = pl111_display_check,
|
|
.enable = pl111_display_enable,
|
|
.disable = pl111_display_disable,
|
|
.update = pl111_display_update,
|
|
.prepare_fb = pl111_display_prepare_fb,
|
|
};
|
|
|
|
static int pl111_clk_div_choose_div(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate, bool set_parent)
|
|
{
|
|
int best_div = 1, div;
|
|
struct clk_hw *parent = clk_hw_get_parent(hw);
|
|
unsigned long best_prate = 0;
|
|
unsigned long best_diff = ~0ul;
|
|
int max_div = (1 << (TIM2_PCD_LO_BITS + TIM2_PCD_HI_BITS)) - 1;
|
|
|
|
for (div = 1; div < max_div; div++) {
|
|
unsigned long this_prate, div_rate, diff;
|
|
|
|
if (set_parent)
|
|
this_prate = clk_hw_round_rate(parent, rate * div);
|
|
else
|
|
this_prate = *prate;
|
|
div_rate = DIV_ROUND_UP_ULL(this_prate, div);
|
|
diff = abs(rate - div_rate);
|
|
|
|
if (diff < best_diff) {
|
|
best_div = div;
|
|
best_diff = diff;
|
|
best_prate = this_prate;
|
|
}
|
|
}
|
|
|
|
*prate = best_prate;
|
|
return best_div;
|
|
}
|
|
|
|
static long pl111_clk_div_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
int div = pl111_clk_div_choose_div(hw, rate, prate, true);
|
|
|
|
return DIV_ROUND_UP_ULL(*prate, div);
|
|
}
|
|
|
|
static unsigned long pl111_clk_div_recalc_rate(struct clk_hw *hw,
|
|
unsigned long prate)
|
|
{
|
|
struct pl111_drm_dev_private *priv =
|
|
container_of(hw, struct pl111_drm_dev_private, clk_div);
|
|
u32 tim2 = readl(priv->regs + CLCD_TIM2);
|
|
int div;
|
|
|
|
if (tim2 & TIM2_BCD)
|
|
return prate;
|
|
|
|
div = tim2 & TIM2_PCD_LO_MASK;
|
|
div |= (tim2 & TIM2_PCD_HI_MASK) >>
|
|
(TIM2_PCD_HI_SHIFT - TIM2_PCD_LO_BITS);
|
|
div += 2;
|
|
|
|
return DIV_ROUND_UP_ULL(prate, div);
|
|
}
|
|
|
|
static int pl111_clk_div_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long prate)
|
|
{
|
|
struct pl111_drm_dev_private *priv =
|
|
container_of(hw, struct pl111_drm_dev_private, clk_div);
|
|
int div = pl111_clk_div_choose_div(hw, rate, &prate, false);
|
|
u32 tim2;
|
|
|
|
spin_lock(&priv->tim2_lock);
|
|
tim2 = readl(priv->regs + CLCD_TIM2);
|
|
tim2 &= ~(TIM2_BCD | TIM2_PCD_LO_MASK | TIM2_PCD_HI_MASK);
|
|
|
|
if (div == 1) {
|
|
tim2 |= TIM2_BCD;
|
|
} else {
|
|
div -= 2;
|
|
tim2 |= div & TIM2_PCD_LO_MASK;
|
|
tim2 |= (div >> TIM2_PCD_LO_BITS) << TIM2_PCD_HI_SHIFT;
|
|
}
|
|
|
|
writel(tim2, priv->regs + CLCD_TIM2);
|
|
spin_unlock(&priv->tim2_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops pl111_clk_div_ops = {
|
|
.recalc_rate = pl111_clk_div_recalc_rate,
|
|
.round_rate = pl111_clk_div_round_rate,
|
|
.set_rate = pl111_clk_div_set_rate,
|
|
};
|
|
|
|
static int
|
|
pl111_init_clock_divider(struct drm_device *drm)
|
|
{
|
|
struct pl111_drm_dev_private *priv = drm->dev_private;
|
|
struct clk *parent = devm_clk_get(drm->dev, "clcdclk");
|
|
struct clk_hw *div = &priv->clk_div;
|
|
const char *parent_name;
|
|
struct clk_init_data init = {
|
|
.name = "pl111_div",
|
|
.ops = &pl111_clk_div_ops,
|
|
.parent_names = &parent_name,
|
|
.num_parents = 1,
|
|
.flags = CLK_SET_RATE_PARENT,
|
|
};
|
|
int ret;
|
|
|
|
if (IS_ERR(parent)) {
|
|
dev_err(drm->dev, "CLCD: unable to get clcdclk.\n");
|
|
return PTR_ERR(parent);
|
|
}
|
|
parent_name = __clk_get_name(parent);
|
|
|
|
spin_lock_init(&priv->tim2_lock);
|
|
div->init = &init;
|
|
|
|
ret = devm_clk_hw_register(drm->dev, div);
|
|
|
|
priv->clk = div->clk;
|
|
return ret;
|
|
}
|
|
|
|
int pl111_display_init(struct drm_device *drm)
|
|
{
|
|
struct pl111_drm_dev_private *priv = drm->dev_private;
|
|
struct device *dev = drm->dev;
|
|
struct device_node *endpoint;
|
|
u32 tft_r0b0g0[3];
|
|
int ret;
|
|
static const u32 formats[] = {
|
|
DRM_FORMAT_ABGR8888,
|
|
DRM_FORMAT_XBGR8888,
|
|
DRM_FORMAT_ARGB8888,
|
|
DRM_FORMAT_XRGB8888,
|
|
DRM_FORMAT_BGR565,
|
|
DRM_FORMAT_RGB565,
|
|
DRM_FORMAT_ABGR1555,
|
|
DRM_FORMAT_XBGR1555,
|
|
DRM_FORMAT_ARGB1555,
|
|
DRM_FORMAT_XRGB1555,
|
|
DRM_FORMAT_ABGR4444,
|
|
DRM_FORMAT_XBGR4444,
|
|
DRM_FORMAT_ARGB4444,
|
|
DRM_FORMAT_XRGB4444,
|
|
};
|
|
|
|
endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
|
|
if (!endpoint)
|
|
return -ENODEV;
|
|
|
|
if (of_property_read_u32_array(endpoint,
|
|
"arm,pl11x,tft-r0g0b0-pads",
|
|
tft_r0b0g0,
|
|
ARRAY_SIZE(tft_r0b0g0)) != 0) {
|
|
dev_err(dev, "arm,pl11x,tft-r0g0b0-pads should be 3 ints\n");
|
|
of_node_put(endpoint);
|
|
return -ENOENT;
|
|
}
|
|
of_node_put(endpoint);
|
|
|
|
if (tft_r0b0g0[0] != 0 ||
|
|
tft_r0b0g0[1] != 8 ||
|
|
tft_r0b0g0[2] != 16) {
|
|
dev_err(dev, "arm,pl11x,tft-r0g0b0-pads != [0,8,16] not yet supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = pl111_init_clock_divider(drm);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = drm_simple_display_pipe_init(drm, &priv->pipe,
|
|
&pl111_display_funcs,
|
|
formats, ARRAY_SIZE(formats),
|
|
&priv->connector.connector);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|