linux/drivers/pci/pcie/portdrv_pci.c

257 lines
6.2 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Purpose: PCI Express Port Bus Driver
* Author: Tom Nguyen <tom.l.nguyen@intel.com>
*
* Copyright (C) 2004 Intel
* Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
*/
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/init.h>
#include <linux/aer.h>
#include <linux/dmi.h>
#include "../pci.h"
#include "portdrv.h"
/* If this switch is set, PCIe port native services should not be enabled. */
bool pcie_ports_disabled;
/*
* If the user specified "pcie_ports=native", use the PCIe services regardless
* of whether the platform has given us permission. On ACPI systems, this
* means we ignore _OSC.
*/
bool pcie_ports_native;
static int __init pcie_port_setup(char *str)
{
if (!strncmp(str, "compat", 6))
pcie_ports_disabled = true;
else if (!strncmp(str, "native", 6))
pcie_ports_native = true;
return 1;
}
__setup("pcie_ports=", pcie_port_setup);
/* global data */
#ifdef CONFIG_PM
static int pcie_port_runtime_suspend(struct device *dev)
{
if (!to_pci_dev(dev)->bridge_d3)
return -EBUSY;
return pcie_port_device_runtime_suspend(dev);
}
static int pcie_port_runtime_idle(struct device *dev)
{
/*
* Assume the PCI core has set bridge_d3 whenever it thinks the port
* should be good to go to D3. Everything else, including moving
* the port to D3, is handled by the PCI core.
*/
return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
}
static const struct dev_pm_ops pcie_portdrv_pm_ops = {
.suspend = pcie_port_device_suspend,
.resume_noirq = pcie_port_device_resume_noirq,
.resume = pcie_port_device_resume,
.freeze = pcie_port_device_suspend,
.thaw = pcie_port_device_resume,
.poweroff = pcie_port_device_suspend,
.restore_noirq = pcie_port_device_resume_noirq,
.restore = pcie_port_device_resume,
.runtime_suspend = pcie_port_runtime_suspend,
.runtime_resume = pcie_port_device_runtime_resume,
.runtime_idle = pcie_port_runtime_idle,
};
#define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
#else /* !PM */
#define PCIE_PORTDRV_PM_OPS NULL
#endif /* !PM */
/*
* pcie_portdrv_probe - Probe PCI-Express port devices
* @dev: PCI-Express port device being probed
*
* If detected invokes the pcie_port_device_register() method for
* this port device.
*
*/
static int pcie_portdrv_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
int status;
if (!pci_is_pcie(dev) ||
((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
(pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) &&
(pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)))
return -ENODEV;
status = pcie_port_device_register(dev);
if (status)
return status;
pci_save_state(dev);
dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NEVER_SKIP |
DPM_FLAG_SMART_SUSPEND);
if (pci_bridge_d3_possible(dev)) {
/*
* Keep the port resumed 100ms to make sure things like
* config space accesses from userspace (lspci) will not
* cause the port to repeatedly suspend and resume.
*/
pm_runtime_set_autosuspend_delay(&dev->dev, 100);
pm_runtime_use_autosuspend(&dev->dev);
pm_runtime_mark_last_busy(&dev->dev);
pm_runtime_put_autosuspend(&dev->dev);
pm_runtime_allow(&dev->dev);
}
return 0;
}
static void pcie_portdrv_remove(struct pci_dev *dev)
{
if (pci_bridge_d3_possible(dev)) {
pm_runtime_forbid(&dev->dev);
pm_runtime_get_noresume(&dev->dev);
pm_runtime_dont_use_autosuspend(&dev->dev);
}
pcie_port_device_remove(dev);
}
static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev,
enum pci_channel_state error)
{
/* Root Port has no impact. Always recovers. */
return PCI_ERS_RESULT_CAN_RECOVER;
}
static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
{
pci_restore_state(dev);
pci_save_state(dev);
return PCI_ERS_RESULT_RECOVERED;
}
static pci_ers_result_t pcie_portdrv_mmio_enabled(struct pci_dev *dev)
{
return PCI_ERS_RESULT_RECOVERED;
}
static int resume_iter(struct device *device, void *data)
{
struct pcie_device *pcie_device;
struct pcie_port_service_driver *driver;
if (device->bus == &pcie_port_bus_type && device->driver) {
driver = to_service_driver(device->driver);
if (driver && driver->error_resume) {
pcie_device = to_pcie_device(device);
/* Forward error message to service drivers */
driver->error_resume(pcie_device->port);
}
}
return 0;
}
static void pcie_portdrv_err_resume(struct pci_dev *dev)
{
device_for_each_child(&dev->dev, NULL, resume_iter);
}
/*
* LINUX Device Driver Model
*/
static const struct pci_device_id port_pci_ids[] = {
/* handle any PCI-Express port */
{ PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_PCI << 8) | 0x00), ~0) },
/* subtractive decode PCI-to-PCI bridge, class type is 060401h */
{ PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_PCI << 8) | 0x01), ~0) },
{ },
};
static const struct pci_error_handlers pcie_portdrv_err_handler = {
.error_detected = pcie_portdrv_error_detected,
.slot_reset = pcie_portdrv_slot_reset,
.mmio_enabled = pcie_portdrv_mmio_enabled,
.resume = pcie_portdrv_err_resume,
};
static struct pci_driver pcie_portdriver = {
.name = "pcieport",
.id_table = &port_pci_ids[0],
.probe = pcie_portdrv_probe,
.remove = pcie_portdrv_remove,
.shutdown = pcie_portdrv_remove,
.err_handler = &pcie_portdrv_err_handler,
.driver.pm = PCIE_PORTDRV_PM_OPS,
};
static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
{
pr_notice("%s detected: will not use MSI for PCIe PME signaling\n",
d->ident);
pcie_pme_disable_msi();
return 0;
}
static const struct dmi_system_id pcie_portdrv_dmi_table[] __initconst = {
/*
* Boxes that should not use MSI for PCIe PME signaling.
*/
{
.callback = dmi_pcie_pme_disable_msi,
.ident = "MSI Wind U-100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR,
"MICRO-STAR INTERNATIONAL CO., LTD"),
DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
},
},
{}
};
static void __init pcie_init_services(void)
{
pcie_aer_init();
pcie_pme_init();
pcie_dpc_init();
pcie_hp_init();
pcie_bandwidth_notification_init();
}
static int __init pcie_portdrv_init(void)
{
if (pcie_ports_disabled)
return -EACCES;
pcie_init_services();
dmi_check_system(pcie_portdrv_dmi_table);
return pci_register_driver(&pcie_portdriver);
}
device_initcall(pcie_portdrv_init);