linux/drivers/remoteproc
Suman Anna 7508ea19b2 remoteproc: k3-r5: Extend support to R5F clusters on J7200 SoCs
The K3 J7200 SoC family has a revised R5F sub-system and contains a
subset of the R5F clusters present on J721E SoCs. The K3 J7200 SoCs
only have two dual-core Arm R5F clusters/subsystems with 2 R5F cores
each. One cluster is present within the MCU voltage domain (MCU_R5FSS0),
while the other is present in the MAIN voltage domain (MAIN_R5FSS0).

The revised IP has the following two new features:
 1. TCMs are auto-initialized during module power-up, and the behavior
    is programmable through a MMR bit.
 2. The LockStep-mode allows the Core1 TCMs to be combined with the
    Core0 TCMs effectively doubling the amount of TCMs available.
    The LockStep-mode on previous SoCs could only use the Core0 TCMs.
    This combined TCMs appear contiguous at the respective Core0 TCM
    addresses.

Extend the support to these clusters in the K3 R5F remoteproc driver
using J7200 specific compatibles. Logic for the second feature is
added in the next patch. The integration of these clusters is very
much similar to J721E SoCs otherwise.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20201119010531.21083-3-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-25 23:05:24 -06:00
..
Kconfig remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem 2020-10-13 18:34:38 -05:00
Makefile remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem 2020-10-13 18:34:38 -05:00
da8xx_remoteproc.c remoteproc: Remove dev_err() usage after platform_get_irq() 2019-08-26 21:59:58 -07:00
imx_rproc.c remoteproc: Use size_t type for len in da_to_va 2020-03-25 22:29:38 -07:00
ingenic_rproc.c remoteproc: ingenic: Constify ingenic_rproc_ops 2020-11-17 21:46:49 -06:00
keystone_remoteproc.c remoteproc: Use size_t type for len in da_to_va 2020-03-25 22:29:38 -07:00
mtk_common.h remoteproc/mediatek: fix sparse errors on dma_alloc and dma_free 2020-11-20 21:45:10 -06:00
mtk_scp.c remoteproc/mediatek: skip if filesz is 0 2020-11-20 21:45:42 -06:00
mtk_scp_ipi.c remoteproc/mediatek: Add support for mt8192 SCP 2020-09-25 23:37:42 -05:00
omap_remoteproc.c treewide: Use fallthrough pseudo-keyword 2020-08-23 17:36:59 -05:00
omap_remoteproc.h remoteproc/omap: Switch to SPDX license identifiers 2020-03-25 22:29:51 -07:00
qcom_common.c remoteproc: qcom: Add missing slab.h 2020-07-13 11:54:27 -07:00
qcom_common.h remoteproc: sysmon: Expose the shutdown result 2020-11-25 18:03:30 -06:00
qcom_pil_info.c remoteproc: qcom: pil-info: Fix shift overflow 2020-07-16 21:30:35 -07:00
qcom_pil_info.h remoteproc: qcom: Introduce helper to store pil info in IMEM 2020-07-01 22:10:18 -07:00
qcom_q6v5.c remoteproc: qcom: q6v5: Query sysmon before graceful shutdown 2020-11-25 23:05:24 -06:00
qcom_q6v5.h remoteproc: qcom: q6v5: Query sysmon before graceful shutdown 2020-11-25 23:05:24 -06:00
qcom_q6v5_adsp.c remoteproc: qcom: q6v5: Query sysmon before graceful shutdown 2020-11-25 23:05:24 -06:00
qcom_q6v5_mss.c remoteproc: qcom: q6v5: Query sysmon before graceful shutdown 2020-11-25 23:05:24 -06:00
qcom_q6v5_pas.c remoteproc: qcom: q6v5: Query sysmon before graceful shutdown 2020-11-25 23:05:24 -06:00
qcom_q6v5_wcss.c remoteproc: qcom: q6v5: Query sysmon before graceful shutdown 2020-11-25 23:05:24 -06:00
qcom_sysmon.c remoteproc: sysmon: Improve error messages 2020-11-25 23:05:24 -06:00
qcom_wcnss.c remoteproc: qcom_wcnss: Allow replacing regulators with power domains 2020-10-26 10:23:11 -05:00
qcom_wcnss.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
qcom_wcnss_iris.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174 2019-05-30 11:26:41 -07:00
remoteproc_cdev.c remoteproc: Add remoteproc character device interface 2020-08-04 20:16:37 -07:00
remoteproc_core.c remoteproc: Add a rproc_set_firmware() API 2020-11-25 23:05:24 -06:00
remoteproc_coredump.c remoteproc: Change default dump configuration to "disabled" 2020-10-13 19:20:54 -05:00
remoteproc_debugfs.c remoteproc: Change default dump configuration to "disabled" 2020-10-13 19:20:54 -05:00
remoteproc_elf_helpers.h remoteproc: Add elf helpers to access elf64 and elf32 fields 2020-03-25 22:29:39 -07:00
remoteproc_elf_loader.c remoteproc: remove rproc_elf32_sanity_check 2020-04-22 21:57:26 -07:00
remoteproc_internal.h remoteproc: Add remoteproc character device interface 2020-08-04 20:16:37 -07:00
remoteproc_sysfs.c remoteproc: Add a rproc_set_firmware() API 2020-11-25 23:05:24 -06:00
remoteproc_virtio.c dma-mapping: split <linux/dma-mapping.h> 2020-10-06 07:07:03 +02:00
st_remoteproc.c remoteproc: remove rproc_elf32_sanity_check 2020-04-22 21:57:26 -07:00
st_slim_rproc.c remoteproc: remove rproc_elf32_sanity_check 2020-04-22 21:57:26 -07:00
stm32_rproc.c remoteproc: stm32: Constify st_rproc_ops 2020-11-17 21:47:03 -06:00
ti_k3_dsp_remoteproc.c remoteproc: k3-dsp: Add support for C71x DSPs 2020-07-28 17:08:32 -07:00
ti_k3_r5_remoteproc.c remoteproc: k3-r5: Extend support to R5F clusters on J7200 SoCs 2020-11-25 23:05:24 -06:00
ti_sci_proc.h remoteproc: k3: Add TI-SCI processor control helper functions 2020-07-28 17:06:43 -07:00
wkup_m3_rproc.c remoteproc: Use size_t type for len in da_to_va 2020-03-25 22:29:38 -07:00