mirror of https://gitee.com/openkylin/linux.git
60 lines
2.2 KiB
Plaintext
60 lines
2.2 KiB
Plaintext
Broadcom FlexRM Ring Manager
|
|
============================
|
|
The Broadcom FlexRM ring manager provides a set of rings which can be
|
|
used to submit work to offload engines. An SoC may have multiple FlexRM
|
|
hardware blocks. There is one device tree entry per FlexRM block. The
|
|
FlexRM driver will create a mailbox-controller instance for given FlexRM
|
|
hardware block where each mailbox channel is a separate FlexRM ring.
|
|
|
|
Required properties:
|
|
--------------------
|
|
- compatible: Should be "brcm,iproc-flexrm-mbox"
|
|
- reg: Specifies base physical address and size of the FlexRM
|
|
ring registers
|
|
- msi-parent: Phandles (and potential Device IDs) to MSI controllers
|
|
The FlexRM engine will send MSIs (instead of wired
|
|
interrupts) to CPU. There is one MSI for each FlexRM ring.
|
|
Refer devicetree/bindings/interrupt-controller/msi.txt
|
|
- #mbox-cells: Specifies the number of cells needed to encode a mailbox
|
|
channel. This should be 3.
|
|
|
|
The 1st cell is the mailbox channel number.
|
|
|
|
The 2nd cell contains MSI completion threshold. This is the
|
|
number of completion messages for which FlexRM will inject
|
|
one MSI interrupt to CPU.
|
|
|
|
The 3nd cell contains MSI timer value representing time for
|
|
which FlexRM will wait to accumulate N completion messages
|
|
where N is the value specified by 2nd cell above. If FlexRM
|
|
does not get required number of completion messages in time
|
|
specified by this cell then it will inject one MSI interrupt
|
|
to CPU provided atleast one completion message is available.
|
|
|
|
Optional properties:
|
|
--------------------
|
|
- dma-coherent: Present if DMA operations made by the FlexRM engine (such
|
|
as DMA descriptor access, access to buffers pointed by DMA
|
|
descriptors and read/write pointer updates to DDR) are
|
|
cache coherent with the CPU.
|
|
|
|
Example:
|
|
--------
|
|
crypto_mbox: mbox@67000000 {
|
|
compatible = "brcm,iproc-flexrm-mbox";
|
|
reg = <0x67000000 0x200000>;
|
|
msi-parent = <&gic_its 0x7f00>;
|
|
#mbox-cells = <3>;
|
|
};
|
|
|
|
crypto@672c0000 {
|
|
compatible = "brcm,spu2-v2-crypto";
|
|
reg = <0x672c0000 0x1000>;
|
|
mboxes = <&crypto_mbox 0 0x1 0xffff>,
|
|
<&crypto_mbox 1 0x1 0xffff>,
|
|
<&crypto_mbox 16 0x1 0xffff>,
|
|
<&crypto_mbox 17 0x1 0xffff>,
|
|
<&crypto_mbox 30 0x1 0xffff>,
|
|
<&crypto_mbox 31 0x1 0xffff>;
|
|
};
|