mirror of https://gitee.com/openkylin/linux.git
135 lines
3.9 KiB
Plaintext
135 lines
3.9 KiB
Plaintext
Freescale i.MX Platforms Device Tree Bindings
|
|
-----------------------------------------------
|
|
|
|
i.MX23 Evaluation Kit
|
|
Required root node properties:
|
|
- compatible = "fsl,imx23-evk", "fsl,imx23";
|
|
|
|
i.MX25 Product Development Kit
|
|
Required root node properties:
|
|
- compatible = "fsl,imx25-pdk", "fsl,imx25";
|
|
|
|
i.MX27 Product Development Kit
|
|
Required root node properties:
|
|
- compatible = "fsl,imx27-pdk", "fsl,imx27";
|
|
|
|
i.MX28 Evaluation Kit
|
|
Required root node properties:
|
|
- compatible = "fsl,imx28-evk", "fsl,imx28";
|
|
|
|
i.MX51 Babbage Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx51-babbage", "fsl,imx51";
|
|
|
|
i.MX53 Automotive Reference Design Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx53-ard", "fsl,imx53";
|
|
|
|
i.MX53 Evaluation Kit
|
|
Required root node properties:
|
|
- compatible = "fsl,imx53-evk", "fsl,imx53";
|
|
|
|
i.MX53 Quick Start Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx53-qsb", "fsl,imx53";
|
|
|
|
i.MX53 Smart Mobile Reference Design Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx53-smd", "fsl,imx53";
|
|
|
|
i.MX6 Quad Armadillo2 Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx6q-arm2", "fsl,imx6q";
|
|
|
|
i.MX6 Quad SABRE Lite Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
|
|
|
|
i.MX6 Quad SABRE Smart Device Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
|
|
|
|
i.MX6 Quad SABRE Automotive Board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
|
|
|
|
Generic i.MX boards
|
|
-------------------
|
|
|
|
No iomux setup is done for these boards, so this must have been configured
|
|
by the bootloader for boards to work with the generic bindings.
|
|
|
|
i.MX27 generic board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx27";
|
|
|
|
i.MX51 generic board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx51";
|
|
|
|
i.MX53 generic board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx53";
|
|
|
|
i.MX6q generic board
|
|
Required root node properties:
|
|
- compatible = "fsl,imx6q";
|
|
|
|
Freescale Vybrid Platform Device Tree Bindings
|
|
----------------------------------------------
|
|
|
|
For the Vybrid SoC familiy all variants with DDR controller are supported,
|
|
which is the VF5xx and VF6xx series. Out of historical reasons, in most
|
|
places the kernel uses vf610 to refer to the whole familiy.
|
|
|
|
Required root node compatible property (one of them):
|
|
- compatible = "fsl,vf500";
|
|
- compatible = "fsl,vf510";
|
|
- compatible = "fsl,vf600";
|
|
- compatible = "fsl,vf610";
|
|
|
|
Freescale LS1021A Platform Device Tree Bindings
|
|
------------------------------------------------
|
|
|
|
Required root node compatible properties:
|
|
- compatible = "fsl,ls1021a";
|
|
|
|
Freescale LS1021A SoC-specific Device Tree Bindings
|
|
-------------------------------------------
|
|
|
|
Freescale SCFG
|
|
SCFG is the supplemental configuration unit, that provides SoC specific
|
|
configuration and status registers for the chip. Such as getting PEX port
|
|
status.
|
|
Required properties:
|
|
- compatible: should be "fsl,ls1021a-scfg"
|
|
- reg: should contain base address and length of SCFG memory-mapped registers
|
|
|
|
Example:
|
|
scfg: scfg@1570000 {
|
|
compatible = "fsl,ls1021a-scfg";
|
|
reg = <0x0 0x1570000 0x0 0x10000>;
|
|
};
|
|
|
|
Freescale DCFG
|
|
DCFG is the device configuration unit, that provides general purpose
|
|
configuration and status for the device. Such as setting the secondary
|
|
core start address and release the secondary core from holdoff and startup.
|
|
Required properties:
|
|
- compatible: should be "fsl,ls1021a-dcfg"
|
|
- reg : should contain base address and length of DCFG memory-mapped registers
|
|
|
|
Example:
|
|
dcfg: dcfg@1ee0000 {
|
|
compatible = "fsl,ls1021a-dcfg";
|
|
reg = <0x0 0x1ee0000 0x0 0x10000>;
|
|
};
|
|
|
|
Freescale LS2085A SoC Device Tree Bindings
|
|
------------------------------------------
|
|
|
|
LS2085A ARMv8 based Simulator model
|
|
Required root node properties:
|
|
- compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
|
|
|