mirror of https://gitee.com/openkylin/linux.git
741 lines
21 KiB
C
741 lines
21 KiB
C
/*
|
|
emc2103.c - Support for SMSC EMC2103
|
|
Copyright (c) 2010 SMSC
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
|
|
/* Addresses scanned */
|
|
static const unsigned short normal_i2c[] = { 0x2E, I2C_CLIENT_END };
|
|
|
|
static const u8 REG_TEMP[4] = { 0x00, 0x02, 0x04, 0x06 };
|
|
static const u8 REG_TEMP_MIN[4] = { 0x3c, 0x38, 0x39, 0x3a };
|
|
static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 };
|
|
|
|
#define REG_CONF1 0x20
|
|
#define REG_TEMP_MAX_ALARM 0x24
|
|
#define REG_TEMP_MIN_ALARM 0x25
|
|
#define REG_FAN_CONF1 0x42
|
|
#define REG_FAN_TARGET_LO 0x4c
|
|
#define REG_FAN_TARGET_HI 0x4d
|
|
#define REG_FAN_TACH_HI 0x4e
|
|
#define REG_FAN_TACH_LO 0x4f
|
|
#define REG_PRODUCT_ID 0xfd
|
|
#define REG_MFG_ID 0xfe
|
|
|
|
/* equation 4 from datasheet: rpm = (3932160 * multipler) / count */
|
|
#define FAN_RPM_FACTOR 3932160
|
|
|
|
/* 2103-2 and 2103-4's 3rd temperature sensor can be connected to two diodes
|
|
* in anti-parallel mode, and in this configuration both can be read
|
|
* independently (so we have 4 temperature inputs). The device can't
|
|
* detect if it's connected in this mode, so we have to manually enable
|
|
* it. Default is to leave the device in the state it's already in (-1).
|
|
* This parameter allows APD mode to be optionally forced on or off */
|
|
static int apd = -1;
|
|
module_param(apd, bint, 0);
|
|
MODULE_PARM_DESC(init, "Set to zero to disable anti-parallel diode mode");
|
|
|
|
struct temperature {
|
|
s8 degrees;
|
|
u8 fraction; /* 0-7 multiples of 0.125 */
|
|
};
|
|
|
|
struct emc2103_data {
|
|
struct device *hwmon_dev;
|
|
struct mutex update_lock;
|
|
bool valid; /* registers are valid */
|
|
bool fan_rpm_control;
|
|
int temp_count; /* num of temp sensors */
|
|
unsigned long last_updated; /* in jiffies */
|
|
struct temperature temp[4]; /* internal + 3 external */
|
|
s8 temp_min[4]; /* no fractional part */
|
|
s8 temp_max[4]; /* no fractional part */
|
|
u8 temp_min_alarm;
|
|
u8 temp_max_alarm;
|
|
u8 fan_multiplier;
|
|
u16 fan_tach;
|
|
u16 fan_target;
|
|
};
|
|
|
|
static int read_u8_from_i2c(struct i2c_client *client, u8 i2c_reg, u8 *output)
|
|
{
|
|
int status = i2c_smbus_read_byte_data(client, i2c_reg);
|
|
if (status < 0) {
|
|
dev_warn(&client->dev, "reg 0x%02x, err %d\n",
|
|
i2c_reg, status);
|
|
} else {
|
|
*output = status;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static void read_temp_from_i2c(struct i2c_client *client, u8 i2c_reg,
|
|
struct temperature *temp)
|
|
{
|
|
u8 degrees, fractional;
|
|
|
|
if (read_u8_from_i2c(client, i2c_reg, °rees) < 0)
|
|
return;
|
|
|
|
if (read_u8_from_i2c(client, i2c_reg + 1, &fractional) < 0)
|
|
return;
|
|
|
|
temp->degrees = degrees;
|
|
temp->fraction = (fractional & 0xe0) >> 5;
|
|
}
|
|
|
|
static void read_fan_from_i2c(struct i2c_client *client, u16 *output,
|
|
u8 hi_addr, u8 lo_addr)
|
|
{
|
|
u8 high_byte, lo_byte;
|
|
|
|
if (read_u8_from_i2c(client, hi_addr, &high_byte) < 0)
|
|
return;
|
|
|
|
if (read_u8_from_i2c(client, lo_addr, &lo_byte) < 0)
|
|
return;
|
|
|
|
*output = ((u16)high_byte << 5) | (lo_byte >> 3);
|
|
}
|
|
|
|
static void write_fan_target_to_i2c(struct i2c_client *client, u16 new_target)
|
|
{
|
|
u8 high_byte = (new_target & 0x1fe0) >> 5;
|
|
u8 low_byte = (new_target & 0x001f) << 3;
|
|
i2c_smbus_write_byte_data(client, REG_FAN_TARGET_LO, low_byte);
|
|
i2c_smbus_write_byte_data(client, REG_FAN_TARGET_HI, high_byte);
|
|
}
|
|
|
|
static void read_fan_config_from_i2c(struct i2c_client *client)
|
|
|
|
{
|
|
struct emc2103_data *data = i2c_get_clientdata(client);
|
|
u8 conf1;
|
|
|
|
if (read_u8_from_i2c(client, REG_FAN_CONF1, &conf1) < 0)
|
|
return;
|
|
|
|
data->fan_multiplier = 1 << ((conf1 & 0x60) >> 5);
|
|
data->fan_rpm_control = (conf1 & 0x80) != 0;
|
|
}
|
|
|
|
static struct emc2103_data *emc2103_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct emc2103_data *data = i2c_get_clientdata(client);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
|
|| !data->valid) {
|
|
int i;
|
|
|
|
for (i = 0; i < data->temp_count; i++) {
|
|
read_temp_from_i2c(client, REG_TEMP[i], &data->temp[i]);
|
|
read_u8_from_i2c(client, REG_TEMP_MIN[i],
|
|
&data->temp_min[i]);
|
|
read_u8_from_i2c(client, REG_TEMP_MAX[i],
|
|
&data->temp_max[i]);
|
|
}
|
|
|
|
read_u8_from_i2c(client, REG_TEMP_MIN_ALARM,
|
|
&data->temp_min_alarm);
|
|
read_u8_from_i2c(client, REG_TEMP_MAX_ALARM,
|
|
&data->temp_max_alarm);
|
|
|
|
read_fan_from_i2c(client, &data->fan_tach,
|
|
REG_FAN_TACH_HI, REG_FAN_TACH_LO);
|
|
read_fan_from_i2c(client, &data->fan_target,
|
|
REG_FAN_TARGET_HI, REG_FAN_TARGET_LO);
|
|
read_fan_config_from_i2c(client);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = true;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
static ssize_t
|
|
show_temp(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
int nr = to_sensor_dev_attr(da)->index;
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
int millidegrees = data->temp[nr].degrees * 1000
|
|
+ data->temp[nr].fraction * 125;
|
|
return sprintf(buf, "%d\n", millidegrees);
|
|
}
|
|
|
|
static ssize_t
|
|
show_temp_min(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
int nr = to_sensor_dev_attr(da)->index;
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
int millidegrees = data->temp_min[nr] * 1000;
|
|
return sprintf(buf, "%d\n", millidegrees);
|
|
}
|
|
|
|
static ssize_t
|
|
show_temp_max(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
int nr = to_sensor_dev_attr(da)->index;
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
int millidegrees = data->temp_max[nr] * 1000;
|
|
return sprintf(buf, "%d\n", millidegrees);
|
|
}
|
|
|
|
static ssize_t
|
|
show_temp_fault(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
int nr = to_sensor_dev_attr(da)->index;
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
bool fault = (data->temp[nr].degrees == -128);
|
|
return sprintf(buf, "%d\n", fault ? 1 : 0);
|
|
}
|
|
|
|
static ssize_t
|
|
show_temp_min_alarm(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
int nr = to_sensor_dev_attr(da)->index;
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
bool alarm = data->temp_min_alarm & (1 << nr);
|
|
return sprintf(buf, "%d\n", alarm ? 1 : 0);
|
|
}
|
|
|
|
static ssize_t
|
|
show_temp_max_alarm(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
int nr = to_sensor_dev_attr(da)->index;
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
bool alarm = data->temp_max_alarm & (1 << nr);
|
|
return sprintf(buf, "%d\n", alarm ? 1 : 0);
|
|
}
|
|
|
|
static ssize_t set_temp_min(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
int nr = to_sensor_dev_attr(da)->index;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct emc2103_data *data = i2c_get_clientdata(client);
|
|
long val;
|
|
|
|
int result = kstrtol(buf, 10, &val);
|
|
if (result < 0)
|
|
return -EINVAL;
|
|
|
|
val = DIV_ROUND_CLOSEST(val, 1000);
|
|
if ((val < -63) || (val > 127))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_min[nr] = val;
|
|
i2c_smbus_write_byte_data(client, REG_TEMP_MIN[nr], val);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t set_temp_max(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
int nr = to_sensor_dev_attr(da)->index;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct emc2103_data *data = i2c_get_clientdata(client);
|
|
long val;
|
|
|
|
int result = kstrtol(buf, 10, &val);
|
|
if (result < 0)
|
|
return -EINVAL;
|
|
|
|
val = DIV_ROUND_CLOSEST(val, 1000);
|
|
if ((val < -63) || (val > 127))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_max[nr] = val;
|
|
i2c_smbus_write_byte_data(client, REG_TEMP_MAX[nr], val);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t
|
|
show_fan(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
int rpm = 0;
|
|
if (data->fan_tach != 0)
|
|
rpm = (FAN_RPM_FACTOR * data->fan_multiplier) / data->fan_tach;
|
|
return sprintf(buf, "%d\n", rpm);
|
|
}
|
|
|
|
static ssize_t
|
|
show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
int fan_div = 8 / data->fan_multiplier;
|
|
return sprintf(buf, "%d\n", fan_div);
|
|
}
|
|
|
|
/* Note: we also update the fan target here, because its value is
|
|
determined in part by the fan clock divider. This follows the principle
|
|
of least surprise; the user doesn't expect the fan target to change just
|
|
because the divider changed. */
|
|
static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
int new_range_bits, old_div = 8 / data->fan_multiplier;
|
|
long new_div;
|
|
|
|
int status = kstrtol(buf, 10, &new_div);
|
|
if (status < 0)
|
|
return -EINVAL;
|
|
|
|
if (new_div == old_div) /* No change */
|
|
return count;
|
|
|
|
switch (new_div) {
|
|
case 1:
|
|
new_range_bits = 3;
|
|
break;
|
|
case 2:
|
|
new_range_bits = 2;
|
|
break;
|
|
case 4:
|
|
new_range_bits = 1;
|
|
break;
|
|
case 8:
|
|
new_range_bits = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
status = i2c_smbus_read_byte_data(client, REG_FAN_CONF1);
|
|
if (status < 0) {
|
|
dev_dbg(&client->dev, "reg 0x%02x, err %d\n",
|
|
REG_FAN_CONF1, status);
|
|
mutex_unlock(&data->update_lock);
|
|
return -EIO;
|
|
}
|
|
status &= 0x9F;
|
|
status |= (new_range_bits << 5);
|
|
i2c_smbus_write_byte_data(client, REG_FAN_CONF1, status);
|
|
|
|
data->fan_multiplier = 8 / new_div;
|
|
|
|
/* update fan target if high byte is not disabled */
|
|
if ((data->fan_target & 0x1fe0) != 0x1fe0) {
|
|
u16 new_target = (data->fan_target * old_div) / new_div;
|
|
data->fan_target = min(new_target, (u16)0x1fff);
|
|
write_fan_target_to_i2c(client, data->fan_target);
|
|
}
|
|
|
|
/* invalidate data to force re-read from hardware */
|
|
data->valid = false;
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t
|
|
show_fan_target(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
int rpm = 0;
|
|
|
|
/* high byte of 0xff indicates disabled so return 0 */
|
|
if ((data->fan_target != 0) && ((data->fan_target & 0x1fe0) != 0x1fe0))
|
|
rpm = (FAN_RPM_FACTOR * data->fan_multiplier)
|
|
/ data->fan_target;
|
|
|
|
return sprintf(buf, "%d\n", rpm);
|
|
}
|
|
|
|
static ssize_t set_fan_target(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
long rpm_target;
|
|
|
|
int result = kstrtol(buf, 10, &rpm_target);
|
|
if (result < 0)
|
|
return -EINVAL;
|
|
|
|
/* Datasheet states 16384 as maximum RPM target (table 3.2) */
|
|
if ((rpm_target < 0) || (rpm_target > 16384))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (rpm_target == 0)
|
|
data->fan_target = 0x1fff;
|
|
else
|
|
data->fan_target = SENSORS_LIMIT(
|
|
(FAN_RPM_FACTOR * data->fan_multiplier) / rpm_target,
|
|
0, 0x1fff);
|
|
|
|
write_fan_target_to_i2c(client, data->fan_target);
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t
|
|
show_fan_fault(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
bool fault = ((data->fan_tach & 0x1fe0) == 0x1fe0);
|
|
return sprintf(buf, "%d\n", fault ? 1 : 0);
|
|
}
|
|
|
|
static ssize_t
|
|
show_pwm_enable(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
struct emc2103_data *data = emc2103_update_device(dev);
|
|
return sprintf(buf, "%d\n", data->fan_rpm_control ? 3 : 0);
|
|
}
|
|
|
|
static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct emc2103_data *data = i2c_get_clientdata(client);
|
|
long new_value;
|
|
u8 conf_reg;
|
|
|
|
int result = kstrtol(buf, 10, &new_value);
|
|
if (result < 0)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
switch (new_value) {
|
|
case 0:
|
|
data->fan_rpm_control = false;
|
|
break;
|
|
case 3:
|
|
data->fan_rpm_control = true;
|
|
break;
|
|
default:
|
|
mutex_unlock(&data->update_lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
|
|
|
|
if (data->fan_rpm_control)
|
|
conf_reg |= 0x80;
|
|
else
|
|
conf_reg &= ~0x80;
|
|
|
|
i2c_smbus_write_byte_data(client, REG_FAN_CONF1, conf_reg);
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, show_temp_min,
|
|
set_temp_min, 0);
|
|
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp_max,
|
|
set_temp_max, 0);
|
|
static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_temp_min_alarm,
|
|
NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_temp_max_alarm,
|
|
NULL, 0);
|
|
|
|
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO | S_IWUSR, show_temp_min,
|
|
set_temp_min, 1);
|
|
static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max,
|
|
set_temp_max, 1);
|
|
static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_temp_min_alarm,
|
|
NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_temp_max_alarm,
|
|
NULL, 1);
|
|
|
|
static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
|
|
static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO | S_IWUSR, show_temp_min,
|
|
set_temp_min, 2);
|
|
static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max,
|
|
set_temp_max, 2);
|
|
static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_temp_fault, NULL, 2);
|
|
static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_temp_min_alarm,
|
|
NULL, 2);
|
|
static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_temp_max_alarm,
|
|
NULL, 2);
|
|
|
|
static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
|
|
static SENSOR_DEVICE_ATTR(temp4_min, S_IRUGO | S_IWUSR, show_temp_min,
|
|
set_temp_min, 3);
|
|
static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO | S_IWUSR, show_temp_max,
|
|
set_temp_max, 3);
|
|
static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_temp_fault, NULL, 3);
|
|
static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO, show_temp_min_alarm,
|
|
NULL, 3);
|
|
static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_temp_max_alarm,
|
|
NULL, 3);
|
|
|
|
static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL);
|
|
static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, show_fan_div, set_fan_div);
|
|
static DEVICE_ATTR(fan1_target, S_IRUGO | S_IWUSR, show_fan_target,
|
|
set_fan_target);
|
|
static DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL);
|
|
|
|
static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
|
|
set_pwm_enable);
|
|
|
|
/* sensors present on all models */
|
|
static struct attribute *emc2103_attributes[] = {
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_fault.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_fault.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
|
|
&dev_attr_fan1_input.attr,
|
|
&dev_attr_fan1_div.attr,
|
|
&dev_attr_fan1_target.attr,
|
|
&dev_attr_fan1_fault.attr,
|
|
&dev_attr_pwm1_enable.attr,
|
|
NULL
|
|
};
|
|
|
|
/* extra temperature sensors only present on 2103-2 and 2103-4 */
|
|
static struct attribute *emc2103_attributes_temp3[] = {
|
|
&sensor_dev_attr_temp3_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_fault.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
/* extra temperature sensors only present on 2103-2 and 2103-4 in APD mode */
|
|
static struct attribute *emc2103_attributes_temp4[] = {
|
|
&sensor_dev_attr_temp4_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_fault.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group emc2103_group = {
|
|
.attrs = emc2103_attributes,
|
|
};
|
|
|
|
static const struct attribute_group emc2103_temp3_group = {
|
|
.attrs = emc2103_attributes_temp3,
|
|
};
|
|
|
|
static const struct attribute_group emc2103_temp4_group = {
|
|
.attrs = emc2103_attributes_temp4,
|
|
};
|
|
|
|
static int
|
|
emc2103_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
|
{
|
|
struct emc2103_data *data;
|
|
int status;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -EIO;
|
|
|
|
data = kzalloc(sizeof(struct emc2103_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* 2103-2 and 2103-4 have 3 external diodes, 2103-1 has 1 */
|
|
status = i2c_smbus_read_byte_data(client, REG_PRODUCT_ID);
|
|
if (status == 0x24) {
|
|
/* 2103-1 only has 1 external diode */
|
|
data->temp_count = 2;
|
|
} else {
|
|
/* 2103-2 and 2103-4 have 3 or 4 external diodes */
|
|
status = i2c_smbus_read_byte_data(client, REG_CONF1);
|
|
if (status < 0) {
|
|
dev_dbg(&client->dev, "reg 0x%02x, err %d\n", REG_CONF1,
|
|
status);
|
|
goto exit_free;
|
|
}
|
|
|
|
/* detect current state of hardware */
|
|
data->temp_count = (status & 0x01) ? 4 : 3;
|
|
|
|
/* force APD state if module parameter is set */
|
|
if (apd == 0) {
|
|
/* force APD mode off */
|
|
data->temp_count = 3;
|
|
status &= ~(0x01);
|
|
i2c_smbus_write_byte_data(client, REG_CONF1, status);
|
|
} else if (apd == 1) {
|
|
/* force APD mode on */
|
|
data->temp_count = 4;
|
|
status |= 0x01;
|
|
i2c_smbus_write_byte_data(client, REG_CONF1, status);
|
|
}
|
|
}
|
|
|
|
/* Register sysfs hooks */
|
|
status = sysfs_create_group(&client->dev.kobj, &emc2103_group);
|
|
if (status)
|
|
goto exit_free;
|
|
|
|
if (data->temp_count >= 3) {
|
|
status = sysfs_create_group(&client->dev.kobj,
|
|
&emc2103_temp3_group);
|
|
if (status)
|
|
goto exit_remove;
|
|
}
|
|
|
|
if (data->temp_count == 4) {
|
|
status = sysfs_create_group(&client->dev.kobj,
|
|
&emc2103_temp4_group);
|
|
if (status)
|
|
goto exit_remove_temp3;
|
|
}
|
|
|
|
data->hwmon_dev = hwmon_device_register(&client->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
status = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove_temp4;
|
|
}
|
|
|
|
dev_info(&client->dev, "%s: sensor '%s'\n",
|
|
dev_name(data->hwmon_dev), client->name);
|
|
|
|
return 0;
|
|
|
|
exit_remove_temp4:
|
|
if (data->temp_count == 4)
|
|
sysfs_remove_group(&client->dev.kobj, &emc2103_temp4_group);
|
|
exit_remove_temp3:
|
|
if (data->temp_count >= 3)
|
|
sysfs_remove_group(&client->dev.kobj, &emc2103_temp3_group);
|
|
exit_remove:
|
|
sysfs_remove_group(&client->dev.kobj, &emc2103_group);
|
|
exit_free:
|
|
kfree(data);
|
|
return status;
|
|
}
|
|
|
|
static int emc2103_remove(struct i2c_client *client)
|
|
{
|
|
struct emc2103_data *data = i2c_get_clientdata(client);
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
|
|
if (data->temp_count == 4)
|
|
sysfs_remove_group(&client->dev.kobj, &emc2103_temp4_group);
|
|
|
|
if (data->temp_count >= 3)
|
|
sysfs_remove_group(&client->dev.kobj, &emc2103_temp3_group);
|
|
|
|
sysfs_remove_group(&client->dev.kobj, &emc2103_group);
|
|
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id emc2103_ids[] = {
|
|
{ "emc2103", 0, },
|
|
{ /* LIST END */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, emc2103_ids);
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int
|
|
emc2103_detect(struct i2c_client *new_client, struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = new_client->adapter;
|
|
int manufacturer, product;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
manufacturer = i2c_smbus_read_byte_data(new_client, REG_MFG_ID);
|
|
if (manufacturer != 0x5D)
|
|
return -ENODEV;
|
|
|
|
product = i2c_smbus_read_byte_data(new_client, REG_PRODUCT_ID);
|
|
if ((product != 0x24) && (product != 0x26))
|
|
return -ENODEV;
|
|
|
|
strlcpy(info->type, "emc2103", I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_driver emc2103_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "emc2103",
|
|
},
|
|
.probe = emc2103_probe,
|
|
.remove = emc2103_remove,
|
|
.id_table = emc2103_ids,
|
|
.detect = emc2103_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
static int __init sensors_emc2103_init(void)
|
|
{
|
|
return i2c_add_driver(&emc2103_driver);
|
|
}
|
|
|
|
static void __exit sensors_emc2103_exit(void)
|
|
{
|
|
i2c_del_driver(&emc2103_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
|
|
MODULE_DESCRIPTION("SMSC EMC2103 hwmon driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sensors_emc2103_init);
|
|
module_exit(sensors_emc2103_exit);
|