mirror of https://gitee.com/openkylin/linux.git
358 lines
9.5 KiB
C
358 lines
9.5 KiB
C
/*
|
|
* For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
|
|
* I2C address is allways 0xC0.
|
|
*
|
|
*
|
|
* Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br)
|
|
* This code is placed under the terms of the GNU General Public License
|
|
*
|
|
* tea5767 autodetection thanks to Torsten Seeboth and Atsushi Nakagawa
|
|
* from their contributions on DScaler.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/videodev.h>
|
|
#include <linux/delay.h>
|
|
#include <media/tuner.h>
|
|
|
|
#define PREFIX "TEA5767 "
|
|
|
|
/*****************************************************************************/
|
|
|
|
/******************************
|
|
* Write mode register values *
|
|
******************************/
|
|
|
|
/* First register */
|
|
#define TEA5767_MUTE 0x80 /* Mutes output */
|
|
#define TEA5767_SEARCH 0x40 /* Activates station search */
|
|
/* Bits 0-5 for divider MSB */
|
|
|
|
/* Second register */
|
|
/* Bits 0-7 for divider LSB */
|
|
|
|
/* Third register */
|
|
|
|
/* Station search from botton to up */
|
|
#define TEA5767_SEARCH_UP 0x80
|
|
|
|
/* Searches with ADC output = 10 */
|
|
#define TEA5767_SRCH_HIGH_LVL 0x60
|
|
|
|
/* Searches with ADC output = 10 */
|
|
#define TEA5767_SRCH_MID_LVL 0x40
|
|
|
|
/* Searches with ADC output = 5 */
|
|
#define TEA5767_SRCH_LOW_LVL 0x20
|
|
|
|
/* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */
|
|
#define TEA5767_HIGH_LO_INJECT 0x10
|
|
|
|
/* Disable stereo */
|
|
#define TEA5767_MONO 0x08
|
|
|
|
/* Disable right channel and turns to mono */
|
|
#define TEA5767_MUTE_RIGHT 0x04
|
|
|
|
/* Disable left channel and turns to mono */
|
|
#define TEA5767_MUTE_LEFT 0x02
|
|
|
|
#define TEA5767_PORT1_HIGH 0x01
|
|
|
|
/* Forth register */
|
|
#define TEA5767_PORT2_HIGH 0x80
|
|
/* Chips stops working. Only I2C bus remains on */
|
|
#define TEA5767_STDBY 0x40
|
|
|
|
/* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */
|
|
#define TEA5767_JAPAN_BAND 0x20
|
|
|
|
/* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */
|
|
#define TEA5767_XTAL_32768 0x10
|
|
|
|
/* Cuts weak signals */
|
|
#define TEA5767_SOFT_MUTE 0x08
|
|
|
|
/* Activates high cut control */
|
|
#define TEA5767_HIGH_CUT_CTRL 0x04
|
|
|
|
/* Activates stereo noise control */
|
|
#define TEA5767_ST_NOISE_CTL 0x02
|
|
|
|
/* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */
|
|
#define TEA5767_SRCH_IND 0x01
|
|
|
|
/* Fiveth register */
|
|
|
|
/* By activating, it will use Xtal at 13 MHz as reference for divider */
|
|
#define TEA5767_PLLREF_ENABLE 0x80
|
|
|
|
/* By activating, deemphasis=50, or else, deemphasis of 50us */
|
|
#define TEA5767_DEEMPH_75 0X40
|
|
|
|
/*****************************
|
|
* Read mode register values *
|
|
*****************************/
|
|
|
|
/* First register */
|
|
#define TEA5767_READY_FLAG_MASK 0x80
|
|
#define TEA5767_BAND_LIMIT_MASK 0X40
|
|
/* Bits 0-5 for divider MSB after search or preset */
|
|
|
|
/* Second register */
|
|
/* Bits 0-7 for divider LSB after search or preset */
|
|
|
|
/* Third register */
|
|
#define TEA5767_STEREO_MASK 0x80
|
|
#define TEA5767_IF_CNTR_MASK 0x7f
|
|
|
|
/* Four register */
|
|
#define TEA5767_ADC_LEVEL_MASK 0xf0
|
|
|
|
/* should be 0 */
|
|
#define TEA5767_CHIP_ID_MASK 0x0f
|
|
|
|
/* Fiveth register */
|
|
/* Reserved for future extensions */
|
|
#define TEA5767_RESERVED_MASK 0xff
|
|
|
|
enum tea5767_xtal_freq {
|
|
TEA5767_LOW_LO_32768 = 0,
|
|
TEA5767_HIGH_LO_32768 = 1,
|
|
TEA5767_LOW_LO_13MHz = 2,
|
|
TEA5767_HIGH_LO_13MHz = 3,
|
|
};
|
|
|
|
|
|
/*****************************************************************************/
|
|
|
|
static void set_tv_freq(struct i2c_client *c, unsigned int freq)
|
|
{
|
|
struct tuner *t = i2c_get_clientdata(c);
|
|
|
|
tuner_warn("This tuner doesn't support TV freq.\n");
|
|
}
|
|
|
|
static void tea5767_status_dump(unsigned char *buffer)
|
|
{
|
|
unsigned int div, frq;
|
|
|
|
if (TEA5767_READY_FLAG_MASK & buffer[0])
|
|
printk(PREFIX "Ready Flag ON\n");
|
|
else
|
|
printk(PREFIX "Ready Flag OFF\n");
|
|
|
|
if (TEA5767_BAND_LIMIT_MASK & buffer[0])
|
|
printk(PREFIX "Tuner at band limit\n");
|
|
else
|
|
printk(PREFIX "Tuner not at band limit\n");
|
|
|
|
div = ((buffer[0] & 0x3f) << 8) | buffer[1];
|
|
|
|
switch (TEA5767_HIGH_LO_32768) {
|
|
case TEA5767_HIGH_LO_13MHz:
|
|
frq = (div * 50000 - 700000 - 225000) / 4; /* Freq in KHz */
|
|
break;
|
|
case TEA5767_LOW_LO_13MHz:
|
|
frq = (div * 50000 + 700000 + 225000) / 4; /* Freq in KHz */
|
|
break;
|
|
case TEA5767_LOW_LO_32768:
|
|
frq = (div * 32768 + 700000 + 225000) / 4; /* Freq in KHz */
|
|
break;
|
|
case TEA5767_HIGH_LO_32768:
|
|
default:
|
|
frq = (div * 32768 - 700000 - 225000) / 4; /* Freq in KHz */
|
|
break;
|
|
}
|
|
buffer[0] = (div >> 8) & 0x3f;
|
|
buffer[1] = div & 0xff;
|
|
|
|
printk(PREFIX "Frequency %d.%03d KHz (divider = 0x%04x)\n",
|
|
frq / 1000, frq % 1000, div);
|
|
|
|
if (TEA5767_STEREO_MASK & buffer[2])
|
|
printk(PREFIX "Stereo\n");
|
|
else
|
|
printk(PREFIX "Mono\n");
|
|
|
|
printk(PREFIX "IF Counter = %d\n", buffer[2] & TEA5767_IF_CNTR_MASK);
|
|
|
|
printk(PREFIX "ADC Level = %d\n",
|
|
(buffer[3] & TEA5767_ADC_LEVEL_MASK) >> 4);
|
|
|
|
printk(PREFIX "Chip ID = %d\n", (buffer[3] & TEA5767_CHIP_ID_MASK));
|
|
|
|
printk(PREFIX "Reserved = 0x%02x\n",
|
|
(buffer[4] & TEA5767_RESERVED_MASK));
|
|
}
|
|
|
|
/* Freq should be specifyed at 62.5 Hz */
|
|
static void set_radio_freq(struct i2c_client *c, unsigned int frq)
|
|
{
|
|
struct tuner *t = i2c_get_clientdata(c);
|
|
unsigned char buffer[5];
|
|
unsigned div;
|
|
int rc;
|
|
|
|
tuner_dbg (PREFIX "radio freq = %d.%03d MHz\n", frq/16000,(frq/16)%1000);
|
|
|
|
/* Rounds freq to next decimal value - for 62.5 KHz step */
|
|
/* frq = 20*(frq/16)+radio_frq[frq%16]; */
|
|
|
|
buffer[2] = TEA5767_PORT1_HIGH;
|
|
buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL |
|
|
TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND;
|
|
buffer[4] = 0;
|
|
|
|
if (t->audmode == V4L2_TUNER_MODE_MONO) {
|
|
tuner_dbg("TEA5767 set to mono\n");
|
|
buffer[2] |= TEA5767_MONO;
|
|
} else {
|
|
tuner_dbg("TEA5767 set to stereo\n");
|
|
}
|
|
|
|
/* Should be replaced */
|
|
switch (TEA5767_HIGH_LO_32768) {
|
|
case TEA5767_HIGH_LO_13MHz:
|
|
tuner_dbg ("TEA5767 radio HIGH LO inject xtal @ 13 MHz\n");
|
|
buffer[2] |= TEA5767_HIGH_LO_INJECT;
|
|
buffer[4] |= TEA5767_PLLREF_ENABLE;
|
|
div = (frq * 4000 / 16 + 700000 + 225000 + 25000) / 50000;
|
|
break;
|
|
case TEA5767_LOW_LO_13MHz:
|
|
tuner_dbg ("TEA5767 radio LOW LO inject xtal @ 13 MHz\n");
|
|
|
|
buffer[4] |= TEA5767_PLLREF_ENABLE;
|
|
div = (frq * 4000 / 16 - 700000 - 225000 + 25000) / 50000;
|
|
break;
|
|
case TEA5767_LOW_LO_32768:
|
|
tuner_dbg ("TEA5767 radio LOW LO inject xtal @ 32,768 MHz\n");
|
|
buffer[3] |= TEA5767_XTAL_32768;
|
|
/* const 700=4000*175 Khz - to adjust freq to right value */
|
|
div = ((frq * 4000 / 16 - 700000 - 225000) + 16384) >> 15;
|
|
break;
|
|
case TEA5767_HIGH_LO_32768:
|
|
default:
|
|
tuner_dbg ("TEA5767 radio HIGH LO inject xtal @ 32,768 MHz\n");
|
|
|
|
buffer[2] |= TEA5767_HIGH_LO_INJECT;
|
|
buffer[3] |= TEA5767_XTAL_32768;
|
|
div = ((frq * (4000 / 16) + 700000 + 225000) + 16384) >> 15;
|
|
break;
|
|
}
|
|
buffer[0] = (div >> 8) & 0x3f;
|
|
buffer[1] = div & 0xff;
|
|
|
|
if (5 != (rc = i2c_master_send(c, buffer, 5)))
|
|
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
|
|
|
|
if (tuner_debug) {
|
|
if (5 != (rc = i2c_master_recv(c, buffer, 5)))
|
|
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
|
|
else
|
|
tea5767_status_dump(buffer);
|
|
}
|
|
}
|
|
|
|
static int tea5767_signal(struct i2c_client *c)
|
|
{
|
|
unsigned char buffer[5];
|
|
int rc;
|
|
struct tuner *t = i2c_get_clientdata(c);
|
|
|
|
memset(buffer, 0, sizeof(buffer));
|
|
if (5 != (rc = i2c_master_recv(c, buffer, 5)))
|
|
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
|
|
|
|
return ((buffer[3] & TEA5767_ADC_LEVEL_MASK) << (13 - 4));
|
|
}
|
|
|
|
static int tea5767_stereo(struct i2c_client *c)
|
|
{
|
|
unsigned char buffer[5];
|
|
int rc;
|
|
struct tuner *t = i2c_get_clientdata(c);
|
|
|
|
memset(buffer, 0, sizeof(buffer));
|
|
if (5 != (rc = i2c_master_recv(c, buffer, 5)))
|
|
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
|
|
|
|
rc = buffer[2] & TEA5767_STEREO_MASK;
|
|
|
|
tuner_dbg("TEA5767 radio ST GET = %02x\n", rc);
|
|
|
|
return ((buffer[2] & TEA5767_STEREO_MASK) ? V4L2_TUNER_SUB_STEREO : 0);
|
|
}
|
|
|
|
static void tea5767_standby(struct i2c_client *c)
|
|
{
|
|
unsigned char buffer[5];
|
|
struct tuner *t = i2c_get_clientdata(c);
|
|
unsigned div, rc;
|
|
|
|
div = (87500 * 4 + 700 + 225 + 25) / 50; /* Set frequency to 87.5 MHz */
|
|
buffer[0] = (div >> 8) & 0x3f;
|
|
buffer[1] = div & 0xff;
|
|
buffer[2] = TEA5767_PORT1_HIGH;
|
|
buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL |
|
|
TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND | TEA5767_STDBY;
|
|
buffer[4] = 0;
|
|
|
|
if (5 != (rc = i2c_master_send(c, buffer, 5)))
|
|
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
|
|
}
|
|
|
|
int tea5767_autodetection(struct i2c_client *c)
|
|
{
|
|
unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
|
|
int rc;
|
|
struct tuner *t = i2c_get_clientdata(c);
|
|
|
|
if ((rc = i2c_master_recv(c, buffer, 7))< 5) {
|
|
tuner_warn("It is not a TEA5767. Received %i bytes.\n", rc);
|
|
return EINVAL;
|
|
}
|
|
|
|
/* If all bytes are the same then it's a TV tuner and not a tea5767 */
|
|
if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&
|
|
buffer[0] == buffer[3] && buffer[0] == buffer[4]) {
|
|
tuner_warn("All bytes are equal. It is not a TEA5767\n");
|
|
return EINVAL;
|
|
}
|
|
|
|
/* Status bytes:
|
|
* Byte 4: bit 3:1 : CI (Chip Identification) == 0
|
|
* bit 0 : internally set to 0
|
|
* Byte 5: bit 7:0 : == 0
|
|
*/
|
|
if (((buffer[3] & 0x0f) != 0x00) || (buffer[4] != 0x00)) {
|
|
tuner_warn("Chip ID is not zero. It is not a TEA5767\n");
|
|
return EINVAL;
|
|
}
|
|
|
|
/* It seems that tea5767 returns 0xff after the 5th byte */
|
|
if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) {
|
|
tuner_warn("Returned more than 5 bytes. It is not a TEA5767\n");
|
|
return EINVAL;
|
|
}
|
|
|
|
tuner_warn("TEA5767 detected.\n");
|
|
return 0;
|
|
}
|
|
|
|
int tea5767_tuner_init(struct i2c_client *c)
|
|
{
|
|
struct tuner *t = i2c_get_clientdata(c);
|
|
|
|
tuner_info("type set to %d (%s)\n", t->type, "Philips TEA5767HN FM Radio");
|
|
strlcpy(c->name, "tea5767", sizeof(c->name));
|
|
|
|
t->tv_freq = set_tv_freq;
|
|
t->radio_freq = set_radio_freq;
|
|
t->has_signal = tea5767_signal;
|
|
t->is_stereo = tea5767_stereo;
|
|
t->standby = tea5767_standby;
|
|
|
|
return (0);
|
|
}
|